7d83e8431a
- Workaround to fix a known regression at cx88-tvaudio.c - provide a module parameter workaround to always enable analog output. Signed-off-by: Panagiotis Christeas <p_christ@hol.gr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
1010 lines
27 KiB
C
1010 lines
27 KiB
C
/*
|
|
|
|
cx88x-audio.c - Conexant CX23880/23881 audio downstream driver driver
|
|
|
|
(c) 2001 Michael Eskin, Tom Zakrajsek [Windows version]
|
|
(c) 2002 Yurij Sysoev <yurij@naturesoft.net>
|
|
(c) 2003 Gerd Knorr <kraxel@bytesex.org>
|
|
|
|
-----------------------------------------------------------------------
|
|
|
|
Lot of voodoo here. Even the data sheet doesn't help to
|
|
understand what is going on here, the documentation for the audio
|
|
part of the cx2388x chip is *very* bad.
|
|
|
|
Some of this comes from party done linux driver sources I got from
|
|
[undocumented].
|
|
|
|
Some comes from the dscaler sources, one of the dscaler driver guy works
|
|
for Conexant ...
|
|
|
|
-----------------------------------------------------------------------
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/init.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kthread.h>
|
|
|
|
#include "cx88.h"
|
|
|
|
static unsigned int audio_debug = 0;
|
|
module_param(audio_debug, int, 0644);
|
|
MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
|
|
|
|
static unsigned int always_analog = 0;
|
|
module_param(always_analog,int,0644);
|
|
MODULE_PARM_DESC(always_analog,"force analog audio out");
|
|
|
|
|
|
#define dprintk(fmt, arg...) if (audio_debug) \
|
|
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
static char *aud_ctl_names[64] = {
|
|
[EN_BTSC_FORCE_MONO] = "BTSC_FORCE_MONO",
|
|
[EN_BTSC_FORCE_STEREO] = "BTSC_FORCE_STEREO",
|
|
[EN_BTSC_FORCE_SAP] = "BTSC_FORCE_SAP",
|
|
[EN_BTSC_AUTO_STEREO] = "BTSC_AUTO_STEREO",
|
|
[EN_BTSC_AUTO_SAP] = "BTSC_AUTO_SAP",
|
|
[EN_A2_FORCE_MONO1] = "A2_FORCE_MONO1",
|
|
[EN_A2_FORCE_MONO2] = "A2_FORCE_MONO2",
|
|
[EN_A2_FORCE_STEREO] = "A2_FORCE_STEREO",
|
|
[EN_A2_AUTO_MONO2] = "A2_AUTO_MONO2",
|
|
[EN_A2_AUTO_STEREO] = "A2_AUTO_STEREO",
|
|
[EN_EIAJ_FORCE_MONO1] = "EIAJ_FORCE_MONO1",
|
|
[EN_EIAJ_FORCE_MONO2] = "EIAJ_FORCE_MONO2",
|
|
[EN_EIAJ_FORCE_STEREO] = "EIAJ_FORCE_STEREO",
|
|
[EN_EIAJ_AUTO_MONO2] = "EIAJ_AUTO_MONO2",
|
|
[EN_EIAJ_AUTO_STEREO] = "EIAJ_AUTO_STEREO",
|
|
[EN_NICAM_FORCE_MONO1] = "NICAM_FORCE_MONO1",
|
|
[EN_NICAM_FORCE_MONO2] = "NICAM_FORCE_MONO2",
|
|
[EN_NICAM_FORCE_STEREO] = "NICAM_FORCE_STEREO",
|
|
[EN_NICAM_AUTO_MONO2] = "NICAM_AUTO_MONO2",
|
|
[EN_NICAM_AUTO_STEREO] = "NICAM_AUTO_STEREO",
|
|
[EN_FMRADIO_FORCE_MONO] = "FMRADIO_FORCE_MONO",
|
|
[EN_FMRADIO_FORCE_STEREO] = "FMRADIO_FORCE_STEREO",
|
|
[EN_FMRADIO_AUTO_STEREO] = "FMRADIO_AUTO_STEREO",
|
|
};
|
|
|
|
struct rlist {
|
|
u32 reg;
|
|
u32 val;
|
|
};
|
|
|
|
static void set_audio_registers(struct cx88_core *core, const struct rlist *l)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; l[i].reg; i++) {
|
|
switch (l[i].reg) {
|
|
case AUD_PDF_DDS_CNST_BYTE2:
|
|
case AUD_PDF_DDS_CNST_BYTE1:
|
|
case AUD_PDF_DDS_CNST_BYTE0:
|
|
case AUD_QAM_MODE:
|
|
case AUD_PHACC_FREQ_8MSB:
|
|
case AUD_PHACC_FREQ_8LSB:
|
|
cx_writeb(l[i].reg, l[i].val);
|
|
break;
|
|
default:
|
|
cx_write(l[i].reg, l[i].val);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void set_audio_start(struct cx88_core *core, u32 mode)
|
|
{
|
|
/* mute */
|
|
cx_write(AUD_VOL_CTL, (1 << 6));
|
|
|
|
/* start programming */
|
|
cx_write(AUD_INIT, mode);
|
|
cx_write(AUD_INIT_LD, 0x0001);
|
|
cx_write(AUD_SOFT_RESET, 0x0001);
|
|
}
|
|
|
|
static void set_audio_finish(struct cx88_core *core, u32 ctl)
|
|
{
|
|
u32 volume;
|
|
|
|
#ifndef USING_CX88_ALSA
|
|
/* restart dma; This avoids buzz in NICAM and is good in others */
|
|
cx88_stop_audio_dma(core);
|
|
#endif
|
|
cx_write(AUD_RATE_THRES_DMD, 0x000000C0);
|
|
#ifndef USING_CX88_ALSA
|
|
cx88_start_audio_dma(core);
|
|
#endif
|
|
|
|
if (cx88_boards[core->board].blackbird) {
|
|
/* sets sound input from external adc */
|
|
if (core->board == CX88_BOARD_HAUPPAUGE_ROSLYN)
|
|
cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
|
|
else
|
|
cx_set(AUD_CTL, EN_I2SIN_ENABLE);
|
|
|
|
cx_write(AUD_I2SINPUTCNTL, 4);
|
|
cx_write(AUD_BAUDRATE, 1);
|
|
/* 'pass-thru mode': this enables the i2s output to the mpeg encoder */
|
|
cx_set(AUD_CTL, EN_I2SOUT_ENABLE);
|
|
cx_write(AUD_I2SOUTPUTCNTL, 1);
|
|
cx_write(AUD_I2SCNTL, 0);
|
|
/* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
|
|
}
|
|
if ((always_analog) || (!cx88_boards[core->board].blackbird)) {
|
|
ctl |= EN_DAC_ENABLE;
|
|
cx_write(AUD_CTL, ctl);
|
|
}
|
|
|
|
/* finish programming */
|
|
cx_write(AUD_SOFT_RESET, 0x0000);
|
|
|
|
/* unmute */
|
|
volume = cx_sread(SHADOW_AUD_VOL_CTL);
|
|
cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, volume);
|
|
}
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap,
|
|
u32 mode)
|
|
{
|
|
static const struct rlist btsc[] = {
|
|
{AUD_AFE_12DB_EN, 0x00000001},
|
|
{AUD_OUT1_SEL, 0x00000013},
|
|
{AUD_OUT1_SHIFT, 0x00000000},
|
|
{AUD_POLY0_DDS_CONSTANT, 0x0012010c},
|
|
{AUD_DMD_RA_DDS, 0x00c3e7aa},
|
|
{AUD_DBX_IN_GAIN, 0x00004734},
|
|
{AUD_DBX_WBE_GAIN, 0x00004640},
|
|
{AUD_DBX_SE_GAIN, 0x00008d31},
|
|
{AUD_DCOC_0_SRC, 0x0000001a},
|
|
{AUD_IIR1_4_SEL, 0x00000021},
|
|
{AUD_DCOC_PASS_IN, 0x00000003},
|
|
{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
|
|
{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
|
|
{AUD_DN0_FREQ, 0x0000283b},
|
|
{AUD_DN2_SRC_SEL, 0x00000008},
|
|
{AUD_DN2_FREQ, 0x00003000},
|
|
{AUD_DN2_AFC, 0x00000002},
|
|
{AUD_DN2_SHFT, 0x00000000},
|
|
{AUD_IIR2_2_SEL, 0x00000020},
|
|
{AUD_IIR2_2_SHIFT, 0x00000000},
|
|
{AUD_IIR2_3_SEL, 0x0000001f},
|
|
{AUD_IIR2_3_SHIFT, 0x00000000},
|
|
{AUD_CRDC1_SRC_SEL, 0x000003ce},
|
|
{AUD_CRDC1_SHIFT, 0x00000000},
|
|
{AUD_CORDIC_SHIFT_1, 0x00000007},
|
|
{AUD_DCOC_1_SRC, 0x0000001b},
|
|
{AUD_DCOC1_SHIFT, 0x00000000},
|
|
{AUD_RDSI_SEL, 0x00000008},
|
|
{AUD_RDSQ_SEL, 0x00000008},
|
|
{AUD_RDSI_SHIFT, 0x00000000},
|
|
{AUD_RDSQ_SHIFT, 0x00000000},
|
|
{AUD_POLYPH80SCALEFAC, 0x00000003},
|
|
{ /* end of list */ },
|
|
};
|
|
static const struct rlist btsc_sap[] = {
|
|
{AUD_AFE_12DB_EN, 0x00000001},
|
|
{AUD_DBX_IN_GAIN, 0x00007200},
|
|
{AUD_DBX_WBE_GAIN, 0x00006200},
|
|
{AUD_DBX_SE_GAIN, 0x00006200},
|
|
{AUD_IIR1_1_SEL, 0x00000000},
|
|
{AUD_IIR1_3_SEL, 0x00000001},
|
|
{AUD_DN1_SRC_SEL, 0x00000007},
|
|
{AUD_IIR1_4_SHIFT, 0x00000006},
|
|
{AUD_IIR2_1_SHIFT, 0x00000000},
|
|
{AUD_IIR2_2_SHIFT, 0x00000000},
|
|
{AUD_IIR3_0_SHIFT, 0x00000000},
|
|
{AUD_IIR3_1_SHIFT, 0x00000000},
|
|
{AUD_IIR3_0_SEL, 0x0000000d},
|
|
{AUD_IIR3_1_SEL, 0x0000000e},
|
|
{AUD_DEEMPH1_SRC_SEL, 0x00000014},
|
|
{AUD_DEEMPH1_SHIFT, 0x00000000},
|
|
{AUD_DEEMPH1_G0, 0x00004000},
|
|
{AUD_DEEMPH1_A0, 0x00000000},
|
|
{AUD_DEEMPH1_B0, 0x00000000},
|
|
{AUD_DEEMPH1_A1, 0x00000000},
|
|
{AUD_DEEMPH1_B1, 0x00000000},
|
|
{AUD_OUT0_SEL, 0x0000003f},
|
|
{AUD_OUT1_SEL, 0x0000003f},
|
|
{AUD_DN1_AFC, 0x00000002},
|
|
{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
|
|
{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
|
|
{AUD_IIR1_0_SEL, 0x0000001d},
|
|
{AUD_IIR1_2_SEL, 0x0000001e},
|
|
{AUD_IIR2_1_SEL, 0x00000002},
|
|
{AUD_IIR2_2_SEL, 0x00000004},
|
|
{AUD_IIR3_2_SEL, 0x0000000f},
|
|
{AUD_DCOC2_SHIFT, 0x00000001},
|
|
{AUD_IIR3_2_SHIFT, 0x00000001},
|
|
{AUD_DEEMPH0_SRC_SEL, 0x00000014},
|
|
{AUD_CORDIC_SHIFT_1, 0x00000006},
|
|
{AUD_POLY0_DDS_CONSTANT, 0x000e4db2},
|
|
{AUD_DMD_RA_DDS, 0x00f696e6},
|
|
{AUD_IIR2_3_SEL, 0x00000025},
|
|
{AUD_IIR1_4_SEL, 0x00000021},
|
|
{AUD_DN1_FREQ, 0x0000c965},
|
|
{AUD_DCOC_PASS_IN, 0x00000003},
|
|
{AUD_DCOC_0_SRC, 0x0000001a},
|
|
{AUD_DCOC_1_SRC, 0x0000001b},
|
|
{AUD_DCOC1_SHIFT, 0x00000000},
|
|
{AUD_RDSI_SEL, 0x00000009},
|
|
{AUD_RDSQ_SEL, 0x00000009},
|
|
{AUD_RDSI_SHIFT, 0x00000000},
|
|
{AUD_RDSQ_SHIFT, 0x00000000},
|
|
{AUD_POLYPH80SCALEFAC, 0x00000003},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
mode |= EN_FMRADIO_EN_RDS;
|
|
|
|
if (sap) {
|
|
dprintk("%s SAP (status: unknown)\n", __FUNCTION__);
|
|
set_audio_start(core, SEL_SAP);
|
|
set_audio_registers(core, btsc_sap);
|
|
set_audio_finish(core, mode);
|
|
} else {
|
|
dprintk("%s (status: known-good)\n", __FUNCTION__);
|
|
set_audio_start(core, SEL_BTSC);
|
|
set_audio_registers(core, btsc);
|
|
set_audio_finish(core, mode);
|
|
}
|
|
}
|
|
|
|
static void set_audio_standard_NICAM(struct cx88_core *core, u32 mode)
|
|
{
|
|
static const struct rlist nicam_l[] = {
|
|
{AUD_AFE_12DB_EN, 0x00000001},
|
|
{AUD_RATE_ADJ1, 0x00000060},
|
|
{AUD_RATE_ADJ2, 0x000000F9},
|
|
{AUD_RATE_ADJ3, 0x000001CC},
|
|
{AUD_RATE_ADJ4, 0x000002B3},
|
|
{AUD_RATE_ADJ5, 0x00000726},
|
|
{AUD_DEEMPHDENOM1_R, 0x0000F3D0},
|
|
{AUD_DEEMPHDENOM2_R, 0x00000000},
|
|
{AUD_ERRLOGPERIOD_R, 0x00000064},
|
|
{AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
|
|
{AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
|
|
{AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
|
|
{AUD_POLYPH80SCALEFAC, 0x00000003},
|
|
{AUD_DMD_RA_DDS, 0x00C00000},
|
|
{AUD_PLL_INT, 0x0000001E},
|
|
{AUD_PLL_DDS, 0x00000000},
|
|
{AUD_PLL_FRAC, 0x0000E542},
|
|
{AUD_START_TIMER, 0x00000000},
|
|
{AUD_DEEMPHNUMER1_R, 0x000353DE},
|
|
{AUD_DEEMPHNUMER2_R, 0x000001B1},
|
|
{AUD_PDF_DDS_CNST_BYTE2, 0x06},
|
|
{AUD_PDF_DDS_CNST_BYTE1, 0x82},
|
|
{AUD_PDF_DDS_CNST_BYTE0, 0x12},
|
|
{AUD_QAM_MODE, 0x05},
|
|
{AUD_PHACC_FREQ_8MSB, 0x34},
|
|
{AUD_PHACC_FREQ_8LSB, 0x4C},
|
|
{AUD_DEEMPHGAIN_R, 0x00006680},
|
|
{AUD_RATE_THRES_DMD, 0x000000C0},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist nicam_bgdki_common[] = {
|
|
{AUD_AFE_12DB_EN, 0x00000001},
|
|
{AUD_RATE_ADJ1, 0x00000010},
|
|
{AUD_RATE_ADJ2, 0x00000040},
|
|
{AUD_RATE_ADJ3, 0x00000100},
|
|
{AUD_RATE_ADJ4, 0x00000400},
|
|
{AUD_RATE_ADJ5, 0x00001000},
|
|
{AUD_ERRLOGPERIOD_R, 0x00000fff},
|
|
{AUD_ERRINTRPTTHSHLD1_R, 0x000003ff},
|
|
{AUD_ERRINTRPTTHSHLD2_R, 0x000000ff},
|
|
{AUD_ERRINTRPTTHSHLD3_R, 0x0000003f},
|
|
{AUD_POLYPH80SCALEFAC, 0x00000003},
|
|
{AUD_DEEMPHGAIN_R, 0x000023c2},
|
|
{AUD_DEEMPHNUMER1_R, 0x0002a7bc},
|
|
{AUD_DEEMPHNUMER2_R, 0x0003023e},
|
|
{AUD_DEEMPHDENOM1_R, 0x0000f3d0},
|
|
{AUD_DEEMPHDENOM2_R, 0x00000000},
|
|
{AUD_PDF_DDS_CNST_BYTE2, 0x06},
|
|
{AUD_PDF_DDS_CNST_BYTE1, 0x82},
|
|
{AUD_QAM_MODE, 0x05},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist nicam_i[] = {
|
|
{AUD_PDF_DDS_CNST_BYTE0, 0x12},
|
|
{AUD_PHACC_FREQ_8MSB, 0x3a},
|
|
{AUD_PHACC_FREQ_8LSB, 0x93},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist nicam_default[] = {
|
|
{AUD_PDF_DDS_CNST_BYTE0, 0x16},
|
|
{AUD_PHACC_FREQ_8MSB, 0x34},
|
|
{AUD_PHACC_FREQ_8LSB, 0x4c},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
set_audio_start(core,SEL_NICAM);
|
|
switch (core->tvaudio) {
|
|
case WW_L:
|
|
dprintk("%s SECAM-L NICAM (status: devel)\n", __FUNCTION__);
|
|
set_audio_registers(core, nicam_l);
|
|
break;
|
|
case WW_I:
|
|
dprintk("%s PAL-I NICAM (status: known-good)\n", __FUNCTION__);
|
|
set_audio_registers(core, nicam_bgdki_common);
|
|
set_audio_registers(core, nicam_i);
|
|
break;
|
|
default:
|
|
dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __FUNCTION__);
|
|
set_audio_registers(core, nicam_bgdki_common);
|
|
set_audio_registers(core, nicam_default);
|
|
break;
|
|
};
|
|
|
|
mode |= EN_DMTRX_LR | EN_DMTRX_BYPASS;
|
|
set_audio_finish(core, mode);
|
|
}
|
|
|
|
static void set_audio_standard_A2(struct cx88_core *core, u32 mode)
|
|
{
|
|
static const struct rlist a2_bgdk_common[] = {
|
|
{AUD_ERRLOGPERIOD_R, 0x00000064},
|
|
{AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
|
|
{AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
|
|
{AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
|
|
{AUD_PDF_DDS_CNST_BYTE2, 0x06},
|
|
{AUD_PDF_DDS_CNST_BYTE1, 0x82},
|
|
{AUD_PDF_DDS_CNST_BYTE0, 0x12},
|
|
{AUD_QAM_MODE, 0x05},
|
|
{AUD_PHACC_FREQ_8MSB, 0x34},
|
|
{AUD_PHACC_FREQ_8LSB, 0x4c},
|
|
{AUD_RATE_ADJ1, 0x00000100},
|
|
{AUD_RATE_ADJ2, 0x00000200},
|
|
{AUD_RATE_ADJ3, 0x00000300},
|
|
{AUD_RATE_ADJ4, 0x00000400},
|
|
{AUD_RATE_ADJ5, 0x00000500},
|
|
{AUD_THR_FR, 0x00000000},
|
|
{AAGC_HYST, 0x0000001a},
|
|
{AUD_PILOT_BQD_1_K0, 0x0000755b},
|
|
{AUD_PILOT_BQD_1_K1, 0x00551340},
|
|
{AUD_PILOT_BQD_1_K2, 0x006d30be},
|
|
{AUD_PILOT_BQD_1_K3, 0xffd394af},
|
|
{AUD_PILOT_BQD_1_K4, 0x00400000},
|
|
{AUD_PILOT_BQD_2_K0, 0x00040000},
|
|
{AUD_PILOT_BQD_2_K1, 0x002a4841},
|
|
{AUD_PILOT_BQD_2_K2, 0x00400000},
|
|
{AUD_PILOT_BQD_2_K3, 0x00000000},
|
|
{AUD_PILOT_BQD_2_K4, 0x00000000},
|
|
{AUD_MODE_CHG_TIMER, 0x00000040},
|
|
{AUD_AFE_12DB_EN, 0x00000001},
|
|
{AUD_CORDIC_SHIFT_0, 0x00000007},
|
|
{AUD_CORDIC_SHIFT_1, 0x00000007},
|
|
{AUD_DEEMPH0_G0, 0x00000380},
|
|
{AUD_DEEMPH1_G0, 0x00000380},
|
|
{AUD_DCOC_0_SRC, 0x0000001a},
|
|
{AUD_DCOC0_SHIFT, 0x00000000},
|
|
{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
|
|
{AUD_DCOC_PASS_IN, 0x00000003},
|
|
{AUD_IIR3_0_SEL, 0x00000021},
|
|
{AUD_DN2_AFC, 0x00000002},
|
|
{AUD_DCOC_1_SRC, 0x0000001b},
|
|
{AUD_DCOC1_SHIFT, 0x00000000},
|
|
{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
|
|
{AUD_IIR3_1_SEL, 0x00000023},
|
|
{AUD_RDSI_SEL, 0x00000017},
|
|
{AUD_RDSI_SHIFT, 0x00000000},
|
|
{AUD_RDSQ_SEL, 0x00000017},
|
|
{AUD_RDSQ_SHIFT, 0x00000000},
|
|
{AUD_PLL_INT, 0x0000001e},
|
|
{AUD_PLL_DDS, 0x00000000},
|
|
{AUD_PLL_FRAC, 0x0000e542},
|
|
{AUD_POLYPH80SCALEFAC, 0x00000001},
|
|
{AUD_START_TIMER, 0x00000000},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist a2_bg[] = {
|
|
{AUD_DMD_RA_DDS, 0x002a4f2f},
|
|
{AUD_C1_UP_THR, 0x00007000},
|
|
{AUD_C1_LO_THR, 0x00005400},
|
|
{AUD_C2_UP_THR, 0x00005400},
|
|
{AUD_C2_LO_THR, 0x00003000},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist a2_dk[] = {
|
|
{AUD_DMD_RA_DDS, 0x002a4f2f},
|
|
{AUD_C1_UP_THR, 0x00007000},
|
|
{AUD_C1_LO_THR, 0x00005400},
|
|
{AUD_C2_UP_THR, 0x00005400},
|
|
{AUD_C2_LO_THR, 0x00003000},
|
|
{AUD_DN0_FREQ, 0x00003a1c},
|
|
{AUD_DN2_FREQ, 0x0000d2e0},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist a1_i[] = {
|
|
{AUD_ERRLOGPERIOD_R, 0x00000064},
|
|
{AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
|
|
{AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
|
|
{AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
|
|
{AUD_PDF_DDS_CNST_BYTE2, 0x06},
|
|
{AUD_PDF_DDS_CNST_BYTE1, 0x82},
|
|
{AUD_PDF_DDS_CNST_BYTE0, 0x12},
|
|
{AUD_QAM_MODE, 0x05},
|
|
{AUD_PHACC_FREQ_8MSB, 0x3a},
|
|
{AUD_PHACC_FREQ_8LSB, 0x93},
|
|
{AUD_DMD_RA_DDS, 0x002a4f2f},
|
|
{AUD_PLL_INT, 0x0000001e},
|
|
{AUD_PLL_DDS, 0x00000004},
|
|
{AUD_PLL_FRAC, 0x0000e542},
|
|
{AUD_RATE_ADJ1, 0x00000100},
|
|
{AUD_RATE_ADJ2, 0x00000200},
|
|
{AUD_RATE_ADJ3, 0x00000300},
|
|
{AUD_RATE_ADJ4, 0x00000400},
|
|
{AUD_RATE_ADJ5, 0x00000500},
|
|
{AUD_THR_FR, 0x00000000},
|
|
{AUD_PILOT_BQD_1_K0, 0x0000755b},
|
|
{AUD_PILOT_BQD_1_K1, 0x00551340},
|
|
{AUD_PILOT_BQD_1_K2, 0x006d30be},
|
|
{AUD_PILOT_BQD_1_K3, 0xffd394af},
|
|
{AUD_PILOT_BQD_1_K4, 0x00400000},
|
|
{AUD_PILOT_BQD_2_K0, 0x00040000},
|
|
{AUD_PILOT_BQD_2_K1, 0x002a4841},
|
|
{AUD_PILOT_BQD_2_K2, 0x00400000},
|
|
{AUD_PILOT_BQD_2_K3, 0x00000000},
|
|
{AUD_PILOT_BQD_2_K4, 0x00000000},
|
|
{AUD_MODE_CHG_TIMER, 0x00000060},
|
|
{AUD_AFE_12DB_EN, 0x00000001},
|
|
{AAGC_HYST, 0x0000000a},
|
|
{AUD_CORDIC_SHIFT_0, 0x00000007},
|
|
{AUD_CORDIC_SHIFT_1, 0x00000007},
|
|
{AUD_C1_UP_THR, 0x00007000},
|
|
{AUD_C1_LO_THR, 0x00005400},
|
|
{AUD_C2_UP_THR, 0x00005400},
|
|
{AUD_C2_LO_THR, 0x00003000},
|
|
{AUD_DCOC_0_SRC, 0x0000001a},
|
|
{AUD_DCOC0_SHIFT, 0x00000000},
|
|
{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
|
|
{AUD_DCOC_PASS_IN, 0x00000003},
|
|
{AUD_IIR3_0_SEL, 0x00000021},
|
|
{AUD_DN2_AFC, 0x00000002},
|
|
{AUD_DCOC_1_SRC, 0x0000001b},
|
|
{AUD_DCOC1_SHIFT, 0x00000000},
|
|
{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
|
|
{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
|
|
{AUD_IIR3_1_SEL, 0x00000023},
|
|
{AUD_DN0_FREQ, 0x000035a3},
|
|
{AUD_DN2_FREQ, 0x000029c7},
|
|
{AUD_CRDC0_SRC_SEL, 0x00000511},
|
|
{AUD_IIR1_0_SEL, 0x00000001},
|
|
{AUD_IIR1_1_SEL, 0x00000000},
|
|
{AUD_IIR3_2_SEL, 0x00000003},
|
|
{AUD_IIR3_2_SHIFT, 0x00000000},
|
|
{AUD_IIR3_0_SEL, 0x00000002},
|
|
{AUD_IIR2_0_SEL, 0x00000021},
|
|
{AUD_IIR2_0_SHIFT, 0x00000002},
|
|
{AUD_DEEMPH0_SRC_SEL, 0x0000000b},
|
|
{AUD_DEEMPH1_SRC_SEL, 0x0000000b},
|
|
{AUD_POLYPH80SCALEFAC, 0x00000001},
|
|
{AUD_START_TIMER, 0x00000000},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist am_l[] = {
|
|
{AUD_ERRLOGPERIOD_R, 0x00000064},
|
|
{AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
|
|
{AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
|
|
{AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
|
|
{AUD_PDF_DDS_CNST_BYTE2, 0x48},
|
|
{AUD_PDF_DDS_CNST_BYTE1, 0x3D},
|
|
{AUD_QAM_MODE, 0x00},
|
|
{AUD_PDF_DDS_CNST_BYTE0, 0xf5},
|
|
{AUD_PHACC_FREQ_8MSB, 0x3a},
|
|
{AUD_PHACC_FREQ_8LSB, 0x4a},
|
|
{AUD_DEEMPHGAIN_R, 0x00006680},
|
|
{AUD_DEEMPHNUMER1_R, 0x000353DE},
|
|
{AUD_DEEMPHNUMER2_R, 0x000001B1},
|
|
{AUD_DEEMPHDENOM1_R, 0x0000F3D0},
|
|
{AUD_DEEMPHDENOM2_R, 0x00000000},
|
|
{AUD_FM_MODE_ENABLE, 0x00000007},
|
|
{AUD_POLYPH80SCALEFAC, 0x00000003},
|
|
{AUD_AFE_12DB_EN, 0x00000001},
|
|
{AAGC_GAIN, 0x00000000},
|
|
{AAGC_HYST, 0x00000018},
|
|
{AAGC_DEF, 0x00000020},
|
|
{AUD_DN0_FREQ, 0x00000000},
|
|
{AUD_POLY0_DDS_CONSTANT, 0x000E4DB2},
|
|
{AUD_DCOC_0_SRC, 0x00000021},
|
|
{AUD_IIR1_0_SEL, 0x00000000},
|
|
{AUD_IIR1_0_SHIFT, 0x00000007},
|
|
{AUD_IIR1_1_SEL, 0x00000002},
|
|
{AUD_IIR1_1_SHIFT, 0x00000000},
|
|
{AUD_DCOC_1_SRC, 0x00000003},
|
|
{AUD_DCOC1_SHIFT, 0x00000000},
|
|
{AUD_DCOC_PASS_IN, 0x00000000},
|
|
{AUD_IIR1_2_SEL, 0x00000023},
|
|
{AUD_IIR1_2_SHIFT, 0x00000000},
|
|
{AUD_IIR1_3_SEL, 0x00000004},
|
|
{AUD_IIR1_3_SHIFT, 0x00000007},
|
|
{AUD_IIR1_4_SEL, 0x00000005},
|
|
{AUD_IIR1_4_SHIFT, 0x00000007},
|
|
{AUD_IIR3_0_SEL, 0x00000007},
|
|
{AUD_IIR3_0_SHIFT, 0x00000000},
|
|
{AUD_DEEMPH0_SRC_SEL, 0x00000011},
|
|
{AUD_DEEMPH0_SHIFT, 0x00000000},
|
|
{AUD_DEEMPH0_G0, 0x00007000},
|
|
{AUD_DEEMPH0_A0, 0x00000000},
|
|
{AUD_DEEMPH0_B0, 0x00000000},
|
|
{AUD_DEEMPH0_A1, 0x00000000},
|
|
{AUD_DEEMPH0_B1, 0x00000000},
|
|
{AUD_DEEMPH1_SRC_SEL, 0x00000011},
|
|
{AUD_DEEMPH1_SHIFT, 0x00000000},
|
|
{AUD_DEEMPH1_G0, 0x00007000},
|
|
{AUD_DEEMPH1_A0, 0x00000000},
|
|
{AUD_DEEMPH1_B0, 0x00000000},
|
|
{AUD_DEEMPH1_A1, 0x00000000},
|
|
{AUD_DEEMPH1_B1, 0x00000000},
|
|
{AUD_OUT0_SEL, 0x0000003F},
|
|
{AUD_OUT1_SEL, 0x0000003F},
|
|
{AUD_DMD_RA_DDS, 0x00F5C285},
|
|
{AUD_PLL_INT, 0x0000001E},
|
|
{AUD_PLL_DDS, 0x00000000},
|
|
{AUD_PLL_FRAC, 0x0000E542},
|
|
{AUD_RATE_ADJ1, 0x00000100},
|
|
{AUD_RATE_ADJ2, 0x00000200},
|
|
{AUD_RATE_ADJ3, 0x00000300},
|
|
{AUD_RATE_ADJ4, 0x00000400},
|
|
{AUD_RATE_ADJ5, 0x00000500},
|
|
{AUD_RATE_THRES_DMD, 0x000000C0},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
static const struct rlist a2_deemph50[] = {
|
|
{AUD_DEEMPH0_G0, 0x00000380},
|
|
{AUD_DEEMPH1_G0, 0x00000380},
|
|
{AUD_DEEMPHGAIN_R, 0x000011e1},
|
|
{AUD_DEEMPHNUMER1_R, 0x0002a7bc},
|
|
{AUD_DEEMPHNUMER2_R, 0x0003023c},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
set_audio_start(core, SEL_A2);
|
|
switch (core->tvaudio) {
|
|
case WW_BG:
|
|
dprintk("%s PAL-BG A1/2 (status: known-good)\n", __FUNCTION__);
|
|
set_audio_registers(core, a2_bgdk_common);
|
|
set_audio_registers(core, a2_bg);
|
|
set_audio_registers(core, a2_deemph50);
|
|
break;
|
|
case WW_DK:
|
|
dprintk("%s PAL-DK A1/2 (status: known-good)\n", __FUNCTION__);
|
|
set_audio_registers(core, a2_bgdk_common);
|
|
set_audio_registers(core, a2_dk);
|
|
set_audio_registers(core, a2_deemph50);
|
|
break;
|
|
case WW_I:
|
|
dprintk("%s PAL-I A1 (status: known-good)\n", __FUNCTION__);
|
|
set_audio_registers(core, a1_i);
|
|
set_audio_registers(core, a2_deemph50);
|
|
break;
|
|
case WW_L:
|
|
dprintk("%s AM-L (status: devel)\n", __FUNCTION__);
|
|
set_audio_registers(core, am_l);
|
|
break;
|
|
default:
|
|
dprintk("%s Warning: wrong value\n", __FUNCTION__);
|
|
return;
|
|
break;
|
|
};
|
|
|
|
mode |= EN_FMRADIO_EN_RDS | EN_DMTRX_SUMDIFF;
|
|
set_audio_finish(core, mode);
|
|
}
|
|
|
|
static void set_audio_standard_EIAJ(struct cx88_core *core)
|
|
{
|
|
static const struct rlist eiaj[] = {
|
|
/* TODO: eiaj register settings are not there yet ... */
|
|
|
|
{ /* end of list */ },
|
|
};
|
|
dprintk("%s (status: unknown)\n", __FUNCTION__);
|
|
|
|
set_audio_start(core, SEL_EIAJ);
|
|
set_audio_registers(core, eiaj);
|
|
set_audio_finish(core, EN_EIAJ_AUTO_STEREO);
|
|
}
|
|
|
|
static void set_audio_standard_FM(struct cx88_core *core,
|
|
enum cx88_deemph_type deemph)
|
|
{
|
|
static const struct rlist fm_deemph_50[] = {
|
|
{AUD_DEEMPH0_G0, 0x0C45},
|
|
{AUD_DEEMPH0_A0, 0x6262},
|
|
{AUD_DEEMPH0_B0, 0x1C29},
|
|
{AUD_DEEMPH0_A1, 0x3FC66},
|
|
{AUD_DEEMPH0_B1, 0x399A},
|
|
|
|
{AUD_DEEMPH1_G0, 0x0D80},
|
|
{AUD_DEEMPH1_A0, 0x6262},
|
|
{AUD_DEEMPH1_B0, 0x1C29},
|
|
{AUD_DEEMPH1_A1, 0x3FC66},
|
|
{AUD_DEEMPH1_B1, 0x399A},
|
|
|
|
{AUD_POLYPH80SCALEFAC, 0x0003},
|
|
{ /* end of list */ },
|
|
};
|
|
static const struct rlist fm_deemph_75[] = {
|
|
{AUD_DEEMPH0_G0, 0x091B},
|
|
{AUD_DEEMPH0_A0, 0x6B68},
|
|
{AUD_DEEMPH0_B0, 0x11EC},
|
|
{AUD_DEEMPH0_A1, 0x3FC66},
|
|
{AUD_DEEMPH0_B1, 0x399A},
|
|
|
|
{AUD_DEEMPH1_G0, 0x0AA0},
|
|
{AUD_DEEMPH1_A0, 0x6B68},
|
|
{AUD_DEEMPH1_B0, 0x11EC},
|
|
{AUD_DEEMPH1_A1, 0x3FC66},
|
|
{AUD_DEEMPH1_B1, 0x399A},
|
|
|
|
{AUD_POLYPH80SCALEFAC, 0x0003},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
/* It is enough to leave default values? */
|
|
static const struct rlist fm_no_deemph[] = {
|
|
|
|
{AUD_POLYPH80SCALEFAC, 0x0003},
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
dprintk("%s (status: unknown)\n", __FUNCTION__);
|
|
set_audio_start(core, SEL_FMRADIO);
|
|
|
|
switch (deemph) {
|
|
case FM_NO_DEEMPH:
|
|
set_audio_registers(core, fm_no_deemph);
|
|
break;
|
|
|
|
case FM_DEEMPH_50:
|
|
set_audio_registers(core, fm_deemph_50);
|
|
break;
|
|
|
|
case FM_DEEMPH_75:
|
|
set_audio_registers(core, fm_deemph_75);
|
|
break;
|
|
}
|
|
|
|
set_audio_finish(core, EN_FMRADIO_AUTO_STEREO);
|
|
}
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
int cx88_detect_nicam(struct cx88_core *core)
|
|
{
|
|
int i, j = 0;
|
|
|
|
dprintk("start nicam autodetect.\n");
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
/* if bit1=1 then nicam is detected */
|
|
j += ((cx_read(AUD_NICAM_STATUS2) & 0x02) >> 1);
|
|
|
|
if (j == 1) {
|
|
dprintk("nicam is detected.\n");
|
|
return 1;
|
|
}
|
|
|
|
/* wait a little bit for next reading status */
|
|
msleep(10);
|
|
}
|
|
|
|
dprintk("nicam is not detected.\n");
|
|
return 0;
|
|
}
|
|
|
|
void cx88_set_tvaudio(struct cx88_core *core)
|
|
{
|
|
switch (core->tvaudio) {
|
|
case WW_BTSC:
|
|
set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
|
|
break;
|
|
case WW_BG:
|
|
case WW_DK:
|
|
case WW_I:
|
|
case WW_L:
|
|
/* prepare all dsp registers */
|
|
set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
|
|
|
|
/* set nicam mode - otherwise
|
|
AUD_NICAM_STATUS2 contains wrong values */
|
|
set_audio_standard_NICAM(core, EN_NICAM_AUTO_STEREO);
|
|
if (0 == cx88_detect_nicam(core)) {
|
|
/* fall back to fm / am mono */
|
|
set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
|
|
core->use_nicam = 0;
|
|
} else {
|
|
core->use_nicam = 1;
|
|
}
|
|
break;
|
|
case WW_EIAJ:
|
|
set_audio_standard_EIAJ(core);
|
|
break;
|
|
case WW_FM:
|
|
set_audio_standard_FM(core, FM_NO_DEEMPH);
|
|
break;
|
|
case WW_NONE:
|
|
default:
|
|
printk("%s/0: unknown tv audio mode [%d]\n",
|
|
core->name, core->tvaudio);
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
void cx88_newstation(struct cx88_core *core)
|
|
{
|
|
core->audiomode_manual = UNSET;
|
|
}
|
|
|
|
void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t)
|
|
{
|
|
static char *m[] = { "stereo", "dual mono", "mono", "sap" };
|
|
static char *p[] = { "no pilot", "pilot c1", "pilot c2", "?" };
|
|
u32 reg, mode, pilot;
|
|
|
|
reg = cx_read(AUD_STATUS);
|
|
mode = reg & 0x03;
|
|
pilot = (reg >> 2) & 0x03;
|
|
|
|
if (core->astat != reg)
|
|
dprintk("AUD_STATUS: 0x%x [%s/%s] ctl=%s\n",
|
|
reg, m[mode], p[pilot],
|
|
aud_ctl_names[cx_read(AUD_CTL) & 63]);
|
|
core->astat = reg;
|
|
|
|
/* TODO
|
|
Reading from AUD_STATUS is not enough
|
|
for auto-detecting sap/dual-fm/nicam.
|
|
Add some code here later.
|
|
*/
|
|
|
|
# if 0
|
|
t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP |
|
|
V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
|
|
t->rxsubchans = V4L2_TUNER_SUB_MONO;
|
|
t->audmode = V4L2_TUNER_MODE_MONO;
|
|
|
|
switch (core->tvaudio) {
|
|
case WW_BTSC:
|
|
t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP;
|
|
t->rxsubchans = V4L2_TUNER_SUB_STEREO;
|
|
if (1 == pilot) {
|
|
/* SAP */
|
|
t->rxsubchans |= V4L2_TUNER_SUB_SAP;
|
|
}
|
|
break;
|
|
case WW_A2_BG:
|
|
case WW_A2_DK:
|
|
case WW_A2_M:
|
|
if (1 == pilot) {
|
|
/* stereo */
|
|
t->rxsubchans =
|
|
V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
|
|
if (0 == mode)
|
|
t->audmode = V4L2_TUNER_MODE_STEREO;
|
|
}
|
|
if (2 == pilot) {
|
|
/* dual language -- FIXME */
|
|
t->rxsubchans =
|
|
V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
|
|
t->audmode = V4L2_TUNER_MODE_LANG1;
|
|
}
|
|
break;
|
|
case WW_NICAM_BGDKL:
|
|
if (0 == mode) {
|
|
t->audmode = V4L2_TUNER_MODE_STEREO;
|
|
t->rxsubchans |= V4L2_TUNER_SUB_STEREO;
|
|
}
|
|
break;
|
|
case WW_SYSTEM_L_AM:
|
|
if (0x0 == mode && !(cx_read(AUD_INIT) & 0x04)) {
|
|
t->audmode = V4L2_TUNER_MODE_STEREO;
|
|
t->rxsubchans |= V4L2_TUNER_SUB_STEREO;
|
|
}
|
|
break;
|
|
default:
|
|
/* nothing */
|
|
break;
|
|
}
|
|
# endif
|
|
return;
|
|
}
|
|
|
|
void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
|
|
{
|
|
u32 ctl = UNSET;
|
|
u32 mask = UNSET;
|
|
|
|
if (manual) {
|
|
core->audiomode_manual = mode;
|
|
} else {
|
|
if (UNSET != core->audiomode_manual)
|
|
return;
|
|
}
|
|
core->audiomode_current = mode;
|
|
|
|
switch (core->tvaudio) {
|
|
case WW_BTSC:
|
|
switch (mode) {
|
|
case V4L2_TUNER_MODE_MONO:
|
|
set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_MONO);
|
|
break;
|
|
case V4L2_TUNER_MODE_LANG1:
|
|
set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
|
|
break;
|
|
case V4L2_TUNER_MODE_LANG2:
|
|
set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP);
|
|
break;
|
|
case V4L2_TUNER_MODE_STEREO:
|
|
set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO);
|
|
break;
|
|
}
|
|
break;
|
|
case WW_BG:
|
|
case WW_DK:
|
|
case WW_I:
|
|
case WW_L:
|
|
if (1 == core->use_nicam) {
|
|
switch (mode) {
|
|
case V4L2_TUNER_MODE_MONO:
|
|
case V4L2_TUNER_MODE_LANG1:
|
|
set_audio_standard_NICAM(core,
|
|
EN_NICAM_FORCE_MONO1);
|
|
break;
|
|
case V4L2_TUNER_MODE_LANG2:
|
|
set_audio_standard_NICAM(core,
|
|
EN_NICAM_FORCE_MONO2);
|
|
break;
|
|
case V4L2_TUNER_MODE_STEREO:
|
|
set_audio_standard_NICAM(core,
|
|
EN_NICAM_FORCE_STEREO);
|
|
break;
|
|
}
|
|
} else {
|
|
if ((core->tvaudio == WW_I) || (core->tvaudio == WW_L)) {
|
|
/* fall back to fm / am mono */
|
|
set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
|
|
} else {
|
|
/* TODO: Add A2 autodection */
|
|
switch (mode) {
|
|
case V4L2_TUNER_MODE_MONO:
|
|
case V4L2_TUNER_MODE_LANG1:
|
|
set_audio_standard_A2(core,
|
|
EN_A2_FORCE_MONO1);
|
|
break;
|
|
case V4L2_TUNER_MODE_LANG2:
|
|
set_audio_standard_A2(core,
|
|
EN_A2_FORCE_MONO2);
|
|
break;
|
|
case V4L2_TUNER_MODE_STEREO:
|
|
set_audio_standard_A2(core,
|
|
EN_A2_FORCE_STEREO);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case WW_FM:
|
|
switch (mode) {
|
|
case V4L2_TUNER_MODE_MONO:
|
|
ctl = EN_FMRADIO_FORCE_MONO;
|
|
mask = 0x3f;
|
|
break;
|
|
case V4L2_TUNER_MODE_STEREO:
|
|
ctl = EN_FMRADIO_AUTO_STEREO;
|
|
mask = 0x3f;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (UNSET != ctl) {
|
|
dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x "
|
|
"[status=0x%x,ctl=0x%x,vol=0x%x]\n",
|
|
mask, ctl, cx_read(AUD_STATUS),
|
|
cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
|
|
cx_andor(AUD_CTL, mask, ctl);
|
|
}
|
|
return;
|
|
}
|
|
|
|
int cx88_audio_thread(void *data)
|
|
{
|
|
struct cx88_core *core = data;
|
|
struct v4l2_tuner t;
|
|
u32 mode = 0;
|
|
|
|
dprintk("cx88: tvaudio thread started\n");
|
|
for (;;) {
|
|
msleep_interruptible(1000);
|
|
if (kthread_should_stop())
|
|
break;
|
|
|
|
/* just monitor the audio status for now ... */
|
|
memset(&t, 0, sizeof(t));
|
|
cx88_get_stereo(core, &t);
|
|
|
|
if (UNSET != core->audiomode_manual)
|
|
/* manually set, don't do anything. */
|
|
continue;
|
|
|
|
/* monitor signal */
|
|
if (t.rxsubchans & V4L2_TUNER_SUB_STEREO)
|
|
mode = V4L2_TUNER_MODE_STEREO;
|
|
else
|
|
mode = V4L2_TUNER_MODE_MONO;
|
|
if (mode == core->audiomode_current)
|
|
continue;
|
|
|
|
/* automatically switch to best available mode */
|
|
cx88_set_stereo(core, mode, 0);
|
|
}
|
|
|
|
dprintk("cx88: tvaudio thread exiting\n");
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
EXPORT_SYMBOL(cx88_set_tvaudio);
|
|
EXPORT_SYMBOL(cx88_newstation);
|
|
EXPORT_SYMBOL(cx88_set_stereo);
|
|
EXPORT_SYMBOL(cx88_get_stereo);
|
|
EXPORT_SYMBOL(cx88_audio_thread);
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
* kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
|
|
*/
|