dc163a41ff
TLB shootdown for SGI UV. v5: 6/12 corrections/improvements per Ingo's second review Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
338 lines
11 KiB
C
338 lines
11 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* SGI UV Broadcast Assist Unit definitions
|
|
*
|
|
* Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
|
|
*/
|
|
|
|
#ifndef __ASM_X86_UV_BAU__
|
|
#define __ASM_X86_UV_BAU__
|
|
|
|
#include <linux/bitmap.h>
|
|
#define BITSPERBYTE 8
|
|
|
|
/*
|
|
* Broadcast Assist Unit messaging structures
|
|
*
|
|
* Selective Broadcast activations are induced by software action
|
|
* specifying a particular 8-descriptor "set" via a 6-bit index written
|
|
* to an MMR.
|
|
* Thus there are 64 unique 512-byte sets of SB descriptors - one set for
|
|
* each 6-bit index value. These descriptor sets are mapped in sequence
|
|
* starting with set 0 located at the address specified in the
|
|
* BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
|
|
* set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
|
|
*
|
|
* We will use 31 sets, one for sending BAU messages from each of the 32
|
|
* cpu's on the node.
|
|
*
|
|
* TLB shootdown will use the first of the 8 descriptors of each set.
|
|
* Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
|
|
*/
|
|
|
|
#define UV_ITEMS_PER_DESCRIPTOR 8
|
|
#define UV_CPUS_PER_ACT_STATUS 32
|
|
#define UV_ACT_STATUS_MASK 0x3
|
|
#define UV_ACT_STATUS_SIZE 2
|
|
#define UV_ACTIVATION_DESCRIPTOR_SIZE 32
|
|
#define UV_DISTRIBUTION_SIZE 256
|
|
#define UV_SW_ACK_NPENDING 8
|
|
#define UV_BAU_MESSAGE 200
|
|
/*
|
|
* Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
|
|
* To be dynamically allocated in the future
|
|
*/
|
|
#define UV_NET_ENDPOINT_INTD 0x38
|
|
#define UV_DESC_BASE_PNODE_SHIFT 49
|
|
#define UV_PAYLOADQ_PNODE_SHIFT 49
|
|
#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
|
|
#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
|
|
|
|
/*
|
|
* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
|
|
*/
|
|
#define DESC_STATUS_IDLE 0
|
|
#define DESC_STATUS_ACTIVE 1
|
|
#define DESC_STATUS_DESTINATION_TIMEOUT 2
|
|
#define DESC_STATUS_SOURCE_TIMEOUT 3
|
|
|
|
/*
|
|
* source side threshholds at which message retries print a warning
|
|
*/
|
|
#define SOURCE_TIMEOUT_LIMIT 20
|
|
#define DESTINATION_TIMEOUT_LIMIT 20
|
|
|
|
/*
|
|
* number of entries in the destination side payload queue
|
|
*/
|
|
#define DEST_Q_SIZE 17
|
|
/*
|
|
* number of destination side software ack resources
|
|
*/
|
|
#define DEST_NUM_RESOURCES 8
|
|
#define MAX_CPUS_PER_NODE 32
|
|
/*
|
|
* completion statuses for sending a TLB flush message
|
|
*/
|
|
#define FLUSH_RETRY 1
|
|
#define FLUSH_GIVEUP 2
|
|
#define FLUSH_COMPLETE 3
|
|
|
|
/*
|
|
* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
|
|
* If the 'multilevel' flag in the header portion of the descriptor
|
|
* has been set to 0, then endpoint multi-unicast mode is selected.
|
|
* The distribution specification (32 bytes) is interpreted as a 256-bit
|
|
* distribution vector. Adjacent bits correspond to consecutive even numbered
|
|
* nodeIDs. The result of adding the index of a given bit to the 15-bit
|
|
* 'base_dest_nodeid' field of the header corresponds to the
|
|
* destination nodeID associated with that specified bit.
|
|
*/
|
|
struct bau_target_nodemask {
|
|
unsigned long bits[BITS_TO_LONGS(256)];
|
|
};
|
|
|
|
/*
|
|
* mask of cpu's on a node
|
|
* (during initialization we need to check that unsigned long has
|
|
* enough bits for max. cpu's per node)
|
|
*/
|
|
struct bau_local_cpumask {
|
|
unsigned long bits;
|
|
};
|
|
|
|
/*
|
|
* Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
|
|
* only 12 bytes (96 bits) of the payload area are usable.
|
|
* An additional 3 bytes (bits 27:4) of the header address are carried
|
|
* to the next bytes of the destination payload queue.
|
|
* And an additional 2 bytes of the header Suppl_A field are also
|
|
* carried to the destination payload queue.
|
|
* But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
|
|
* of the destination payload queue, which is written by the hardware
|
|
* with the s/w ack resource bit vector.
|
|
* [ effective message contents (16 bytes (128 bits) maximum), not counting
|
|
* the s/w ack bit vector ]
|
|
*/
|
|
|
|
/*
|
|
* The payload is software-defined for INTD transactions
|
|
*/
|
|
struct bau_msg_payload {
|
|
unsigned long address; /* signifies a page or all TLB's
|
|
of the cpu */
|
|
/* 64 bits */
|
|
unsigned short sending_cpu; /* filled in by sender */
|
|
/* 16 bits */
|
|
unsigned short acknowledge_count;/* filled in by destination */
|
|
/* 16 bits */
|
|
unsigned int reserved1:32; /* not usable */
|
|
};
|
|
|
|
|
|
/*
|
|
* Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
|
|
* see table 4.2.3.0.1 in broacast_assist spec.
|
|
*/
|
|
struct bau_msg_header {
|
|
int dest_subnodeid:6; /* must be zero */
|
|
/* bits 5:0 */
|
|
int base_dest_nodeid:15; /* nasid>>1 (pnode) of first bit in node_map */
|
|
/* bits 20:6 */
|
|
int command:8; /* message type */
|
|
/* bits 28:21 */
|
|
/* 0x38: SN3net EndPoint Message */
|
|
int rsvd_1:3; /* must be zero */
|
|
/* bits 31:29 */
|
|
/* int will align on 32 bits */
|
|
int rsvd_2:9; /* must be zero */
|
|
/* bits 40:32 */
|
|
/* Suppl_A is 56-41 */
|
|
int payload_2a:8; /* becomes byte 16 of msg */
|
|
/* bits 48:41 */ /* not currently using */
|
|
int payload_2b:8; /* becomes byte 17 of msg */
|
|
/* bits 56:49 */ /* not currently using */
|
|
/* Address field (96:57) is never used as an
|
|
address (these are address bits 42:3) */
|
|
int rsvd_3:1; /* must be zero */
|
|
/* bit 57 */
|
|
/* address bits 27:4 are payload */
|
|
/* these 24 bits become bytes 12-14 of msg */
|
|
int replied_to:1; /* sent as 0 by the source to byte 12 */
|
|
/* bit 58 */
|
|
|
|
int payload_1a:5; /* not currently used */
|
|
/* bits 63:59 */
|
|
int payload_1b:8; /* not currently used */
|
|
/* bits 71:64 */
|
|
int payload_1c:8; /* not currently used */
|
|
/* bits 79:72 */
|
|
int payload_1d:2; /* not currently used */
|
|
/* bits 81:80 */
|
|
|
|
int rsvd_4:7; /* must be zero */
|
|
/* bits 88:82 */
|
|
int sw_ack_flag:1; /* software acknowledge flag */
|
|
/* bit 89 */
|
|
/* INTD trasactions at destination are to
|
|
wait for software acknowledge */
|
|
int rsvd_5:6; /* must be zero */
|
|
/* bits 95:90 */
|
|
int rsvd_6:5; /* must be zero */
|
|
/* bits 100:96 */
|
|
int int_both:1; /* if 1, interrupt both sockets on the blade */
|
|
/* bit 101*/
|
|
int fairness:3; /* usually zero */
|
|
/* bits 104:102 */
|
|
int multilevel:1; /* multi-level multicast format */
|
|
/* bit 105 */
|
|
/* 0 for TLB: endpoint multi-unicast messages */
|
|
int chaining:1; /* next descriptor is part of this activation*/
|
|
/* bit 106 */
|
|
int rsvd_7:21; /* must be zero */
|
|
/* bits 127:107 */
|
|
};
|
|
|
|
/*
|
|
* The activation descriptor:
|
|
* The format of the message to send, plus all accompanying control
|
|
* Should be 64 bytes
|
|
*/
|
|
struct bau_desc {
|
|
struct bau_target_nodemask distribution;
|
|
/*
|
|
* message template, consisting of header and payload:
|
|
*/
|
|
struct bau_msg_header header;
|
|
struct bau_msg_payload payload;
|
|
};
|
|
/*
|
|
* -payload-- ---------header------
|
|
* bytes 0-11 bits 41-56 bits 58-81
|
|
* A B (2) C (3)
|
|
*
|
|
* A/B/C are moved to:
|
|
* A C B
|
|
* bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
|
|
* ------------payload queue-----------
|
|
*/
|
|
|
|
/*
|
|
* The payload queue on the destination side is an array of these.
|
|
* With BAU_MISC_CONTROL set for software acknowledge mode, the messages
|
|
* are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
|
|
* bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
|
|
* (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
|
|
* sw_ack_vector and payload_2)
|
|
* "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
|
|
* Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
|
|
* operation."
|
|
*/
|
|
struct bau_payload_queue_entry {
|
|
unsigned long address; /* signifies a page or all TLB's
|
|
of the cpu */
|
|
/* 64 bits, bytes 0-7 */
|
|
|
|
unsigned short sending_cpu; /* cpu that sent the message */
|
|
/* 16 bits, bytes 8-9 */
|
|
|
|
unsigned short acknowledge_count; /* filled in by destination */
|
|
/* 16 bits, bytes 10-11 */
|
|
|
|
unsigned short replied_to:1; /* sent as 0 by the source */
|
|
/* 1 bit */
|
|
unsigned short unused1:7; /* not currently using */
|
|
/* 7 bits: byte 12) */
|
|
|
|
unsigned char unused2[2]; /* not currently using */
|
|
/* bytes 13-14 */
|
|
|
|
unsigned char sw_ack_vector; /* filled in by the hardware */
|
|
/* byte 15 (bits 127:120) */
|
|
|
|
unsigned char unused4[3]; /* not currently using bytes 17-19 */
|
|
/* bytes 17-19 */
|
|
|
|
int number_of_cpus; /* filled in at destination */
|
|
/* 32 bits, bytes 20-23 (aligned) */
|
|
|
|
unsigned char unused5[8]; /* not using */
|
|
/* bytes 24-31 */
|
|
};
|
|
|
|
/*
|
|
* one for every slot in the destination payload queue
|
|
*/
|
|
struct bau_msg_status {
|
|
struct bau_local_cpumask seen_by; /* map of cpu's */
|
|
};
|
|
|
|
/*
|
|
* one for every slot in the destination software ack resources
|
|
*/
|
|
struct bau_sw_ack_status {
|
|
struct bau_payload_queue_entry *msg; /* associated message */
|
|
int watcher; /* cpu monitoring, or -1 */
|
|
};
|
|
|
|
/*
|
|
* one on every node and per-cpu; to locate the software tables
|
|
*/
|
|
struct bau_control {
|
|
struct bau_desc *descriptor_base;
|
|
struct bau_payload_queue_entry *bau_msg_head;
|
|
struct bau_payload_queue_entry *va_queue_first;
|
|
struct bau_payload_queue_entry *va_queue_last;
|
|
struct bau_msg_status *msg_statuses;
|
|
int *watching; /* pointer to array */
|
|
};
|
|
|
|
/*
|
|
* This structure is allocated per_cpu for UV TLB shootdown statistics.
|
|
*/
|
|
struct ptc_stats {
|
|
unsigned long ptc_i; /* number of IPI-style flushes */
|
|
unsigned long requestor; /* number of nodes this cpu sent to */
|
|
unsigned long requestee; /* times cpu was remotely requested */
|
|
unsigned long alltlb; /* times all tlb's on this cpu were flushed */
|
|
unsigned long onetlb; /* times just one tlb on this cpu was flushed */
|
|
unsigned long s_retry; /* retries on source side timeouts */
|
|
unsigned long d_retry; /* retries on destination side timeouts */
|
|
unsigned long sflush; /* cycles spent in uv_flush_tlb_others */
|
|
unsigned long dflush; /* cycles spent on destination side */
|
|
unsigned long retriesok; /* successes on retries */
|
|
unsigned long nomsg; /* interrupts with no message */
|
|
unsigned long multmsg; /* interrupts with multiple messages */
|
|
unsigned long ntargeted;/* nodes targeted */
|
|
};
|
|
|
|
static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
|
|
{
|
|
return constant_test_bit(node, &dstp->bits[0]);
|
|
}
|
|
static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
|
|
{
|
|
__set_bit(node, &dstp->bits[0]);
|
|
}
|
|
static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
|
|
{
|
|
bitmap_zero(&dstp->bits[0], nbits);
|
|
}
|
|
|
|
static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
|
|
{
|
|
bitmap_zero(&dstp->bits, nbits);
|
|
}
|
|
|
|
#define cpubit_isset(cpu, bau_local_cpumask) \
|
|
test_bit((cpu), (bau_local_cpumask).bits)
|
|
|
|
extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
|
|
extern void uv_bau_message_intr1(void);
|
|
extern void uv_bau_timeout_intr1(void);
|
|
|
|
#endif /* __ASM_X86_UV_BAU__ */
|