1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
195 lines
6.4 KiB
C
195 lines
6.4 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004 Red Hat, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/immap_cpm2.h>
|
|
#include <asm/mpc8260.h>
|
|
|
|
#include "m8260_pci.h"
|
|
|
|
|
|
/* PCI bus configuration registers.
|
|
*/
|
|
|
|
static void __init m8260_setup_pci(struct pci_controller *hose)
|
|
{
|
|
volatile cpm2_map_t *immap = cpm2_immr;
|
|
unsigned long pocmr;
|
|
u16 tempShort;
|
|
|
|
#ifndef CONFIG_ATC /* already done in U-Boot */
|
|
/*
|
|
* Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
|
|
* and local bus for PCI (SIUMCR [LBPC]).
|
|
*/
|
|
immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000;
|
|
#endif
|
|
|
|
/* Make PCI lowest priority */
|
|
/* Each 4 bits is a device bus request and the MS 4bits
|
|
is highest priority */
|
|
/* Bus 4bit value
|
|
--- ----------
|
|
CPM high 0b0000
|
|
CPM middle 0b0001
|
|
CPM low 0b0010
|
|
PCI reguest 0b0011
|
|
Reserved 0b0100
|
|
Reserved 0b0101
|
|
Internal Core 0b0110
|
|
External Master 1 0b0111
|
|
External Master 2 0b1000
|
|
External Master 3 0b1001
|
|
The rest are reserved */
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
|
|
|
|
/* Park bus on core while modifying PCI Bus accesses */
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6;
|
|
|
|
/*
|
|
* Set up master window that allows the CPU to access PCI space. This
|
|
* window is set up using the first SIU PCIBR registers.
|
|
*/
|
|
immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK;
|
|
immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE;
|
|
|
|
/* Disable machine check on no response or target abort */
|
|
immap->im_pci.pci_emr = cpu_to_le32(0x1fe7);
|
|
/* Release PCI RST (by default the PCI RST signal is held low) */
|
|
immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
|
|
|
|
/* give it some time */
|
|
mdelay(1);
|
|
|
|
/*
|
|
* Set up master window that allows the CPU to access PCI Memory (prefetch)
|
|
* space. This window is set up using the first set of Outbound ATU registers.
|
|
*/
|
|
immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12);
|
|
immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12);
|
|
pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff;
|
|
immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN);
|
|
|
|
/*
|
|
* Set up master window that allows the CPU to access PCI Memory (non-prefetch)
|
|
* space. This window is set up using the second set of Outbound ATU registers.
|
|
*/
|
|
immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12);
|
|
immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12);
|
|
pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff;
|
|
immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE);
|
|
|
|
/*
|
|
* Set up master window that allows the CPU to access PCI IO space. This window
|
|
* is set up using the third set of Outbound ATU registers.
|
|
*/
|
|
immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12);
|
|
immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12);
|
|
pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff;
|
|
immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO);
|
|
|
|
/*
|
|
* Set up slave window that allows PCI masters to access MPC826x local memory.
|
|
* This window is set up using the first set of Inbound ATU registers
|
|
*/
|
|
|
|
immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12);
|
|
immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12);
|
|
pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff;
|
|
immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN);
|
|
|
|
/* See above for description - puts PCI request as highest priority */
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
|
|
|
|
/* Park the bus on the PCI */
|
|
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
|
|
|
|
/* Host mode - specify the bridge as a host-PCI bridge */
|
|
early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST);
|
|
|
|
/* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
|
|
early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort);
|
|
early_write_config_word(hose, 0, 0, PCI_COMMAND,
|
|
tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
|
|
}
|
|
|
|
void __init m8260_find_bridges(void)
|
|
{
|
|
extern int pci_assign_all_busses;
|
|
struct pci_controller * hose;
|
|
|
|
pci_assign_all_busses = 1;
|
|
|
|
hose = pcibios_alloc_controller();
|
|
|
|
if (!hose)
|
|
return;
|
|
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
|
|
hose->first_busno = 0;
|
|
hose->bus_offset = 0;
|
|
hose->last_busno = 0xff;
|
|
|
|
setup_m8260_indirect_pci(hose,
|
|
(unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
|
|
(unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
|
|
|
|
m8260_setup_pci(hose);
|
|
hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET;
|
|
|
|
isa_io_base =
|
|
(unsigned long) ioremap(MPC826x_PCI_IO_BASE,
|
|
MPC826x_PCI_IO_SIZE);
|
|
hose->io_base_virt = (void *) isa_io_base;
|
|
|
|
/* setup resources */
|
|
pci_init_resource(&hose->mem_resources[0],
|
|
MPC826x_PCI_LOWER_MEM,
|
|
MPC826x_PCI_UPPER_MEM,
|
|
IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
|
|
|
|
pci_init_resource(&hose->mem_resources[1],
|
|
MPC826x_PCI_LOWER_MMIO,
|
|
MPC826x_PCI_UPPER_MMIO,
|
|
IORESOURCE_MEM, "PCI memory");
|
|
|
|
pci_init_resource(&hose->io_resource,
|
|
MPC826x_PCI_LOWER_IO,
|
|
MPC826x_PCI_UPPER_IO,
|
|
IORESOURCE_IO, "PCI I/O");
|
|
}
|