fa3218d859
Currently early kernel messages, i.e., those from uncompression, go to the debugging UART. And if it is enabled in the platform configuration, but not initialized by the bootloader, the machine hangs, waiting for UART status change. Besides, having those messages on another UART - typically the console UART - may be preferrable. This patch allows selecting the UART in kernel configuration. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
128 lines
5.0 KiB
C
128 lines
5.0 KiB
C
/*
|
|
* include/asm-arm/arch-at91/at91sam9263.h
|
|
*
|
|
* (C) 2007 Atmel Corporation.
|
|
*
|
|
* Common definitions.
|
|
* Based on AT91SAM9263 datasheet revision B (Preliminary).
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef AT91SAM9263_H
|
|
#define AT91SAM9263_H
|
|
|
|
/*
|
|
* Peripheral identifiers/interrupts.
|
|
*/
|
|
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
|
|
#define AT91_ID_SYS 1 /* System Peripherals */
|
|
#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
|
|
#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
|
|
#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
|
|
#define AT91SAM9263_ID_US0 7 /* USART 0 */
|
|
#define AT91SAM9263_ID_US1 8 /* USART 1 */
|
|
#define AT91SAM9263_ID_US2 9 /* USART 2 */
|
|
#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
|
|
#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
|
|
#define AT91SAM9263_ID_CAN 12 /* CAN */
|
|
#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
|
|
#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
|
|
#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
|
|
#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
|
|
#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
|
|
#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
|
|
#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
|
|
#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
|
|
#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
|
|
#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
|
|
#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
|
|
#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
|
|
#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
|
|
#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
|
|
#define AT91SAM9263_ID_UHP 29 /* USB Host port */
|
|
#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
|
|
#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
|
|
|
|
|
|
/*
|
|
* User Peripheral physical base addresses.
|
|
*/
|
|
#define AT91SAM9263_BASE_UDP 0xfff78000
|
|
#define AT91SAM9263_BASE_TCB0 0xfff7c000
|
|
#define AT91SAM9263_BASE_TC0 0xfff7c000
|
|
#define AT91SAM9263_BASE_TC1 0xfff7c040
|
|
#define AT91SAM9263_BASE_TC2 0xfff7c080
|
|
#define AT91SAM9263_BASE_MCI0 0xfff80000
|
|
#define AT91SAM9263_BASE_MCI1 0xfff84000
|
|
#define AT91SAM9263_BASE_TWI 0xfff88000
|
|
#define AT91SAM9263_BASE_US0 0xfff8c000
|
|
#define AT91SAM9263_BASE_US1 0xfff90000
|
|
#define AT91SAM9263_BASE_US2 0xfff94000
|
|
#define AT91SAM9263_BASE_SSC0 0xfff98000
|
|
#define AT91SAM9263_BASE_SSC1 0xfff9c000
|
|
#define AT91SAM9263_BASE_AC97C 0xfffa0000
|
|
#define AT91SAM9263_BASE_SPI0 0xfffa4000
|
|
#define AT91SAM9263_BASE_SPI1 0xfffa8000
|
|
#define AT91SAM9263_BASE_CAN 0xfffac000
|
|
#define AT91SAM9263_BASE_PWMC 0xfffb8000
|
|
#define AT91SAM9263_BASE_EMAC 0xfffbc000
|
|
#define AT91SAM9263_BASE_ISI 0xfffc4000
|
|
#define AT91SAM9263_BASE_2DGE 0xfffc8000
|
|
#define AT91_BASE_SYS 0xffffe000
|
|
|
|
/*
|
|
* System Peripherals (offset from AT91_BASE_SYS)
|
|
*/
|
|
#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
|
|
#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
|
|
#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
|
|
#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
|
|
#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
|
|
#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
|
|
#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
|
|
#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
|
|
#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
|
|
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
|
|
#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
|
|
#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
|
|
#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
|
|
#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
|
|
#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
|
|
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
|
|
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
|
|
#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
|
|
#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
|
|
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
|
|
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
|
|
#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
|
|
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
|
|
|
|
#define AT91_USART0 AT91SAM9263_BASE_US0
|
|
#define AT91_USART1 AT91SAM9263_BASE_US1
|
|
#define AT91_USART2 AT91SAM9263_BASE_US2
|
|
|
|
#define AT91_SMC AT91_SMC0
|
|
|
|
/*
|
|
* Internal Memory.
|
|
*/
|
|
#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
|
|
#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
|
|
|
|
#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
|
|
#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
|
|
|
|
#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
|
|
#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
|
|
|
|
#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
|
|
#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
|
|
#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
|
|
|
|
|
|
#endif
|