a6ecb7e96c
The gianfar@25000 node was missing its ranges prop for the mdio bus
and provided an explicit ranges property on gianfar@24000 to match
change from commit:
commit 70b3adbba0
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu Mar 19 21:01:45 2009 +0300
powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
398 lines
9.0 KiB
Plaintext
398 lines
9.0 KiB
Plaintext
/*
|
|
* MPC8313E RDB Device Tree Source
|
|
*
|
|
* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "MPC8313ERDB";
|
|
compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8313@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-line-size = <32>;
|
|
d-cache-size = <16384>;
|
|
i-cache-size = <16384>;
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x08000000>; // 128MB at 0
|
|
};
|
|
|
|
localbus@e0005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0xe0005000 0x1000>;
|
|
interrupts = <77 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
|
|
// CS0 and CS1 are swapped when
|
|
// booting from nand, but the
|
|
// addresses are the same.
|
|
ranges = <0x0 0x0 0xfe000000 0x00800000
|
|
0x1 0x0 0xe2800000 0x00008000
|
|
0x2 0x0 0xf0000000 0x00020000
|
|
0x3 0x0 0xfa000000 0x00008000>;
|
|
|
|
flash@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x800000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
};
|
|
|
|
nand@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8313-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <0x1 0x0 0x2000>;
|
|
|
|
u-boot@0 {
|
|
reg = <0x0 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
kernel@100000 {
|
|
reg = <0x100000 0x300000>;
|
|
};
|
|
|
|
fs@400000 {
|
|
reg = <0x400000 0x1c00000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc8313@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
sleep-nexus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
sleep = <&pmc 0x03000000>;
|
|
ranges;
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
rtc@68 {
|
|
compatible = "dallas,ds1339";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec2.2", "fsl,sec2.1",
|
|
"fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
fsl,num-channels = <1>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0x4c>;
|
|
fsl,descriptor-types-mask = <0x0122003f>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <15 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <16 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
|
usb@23000 {
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x23000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <38 0x8>;
|
|
phy_type = "utmi_wide";
|
|
sleep = <&pmc 0x00300000>;
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
sleep = <&pmc 0x20000000>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <37 0x8 36 0x8 35 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
tbi-handle = < &tbi0 >;
|
|
/* Vitesse 7385 isn't on the MDIO bus */
|
|
fixed-link = <1 1 1000 0 0>;
|
|
fsl,magic-packet;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x520 0x20>;
|
|
phy4: ethernet-phy@4 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <20 0x8>;
|
|
reg = <0x4>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x25000 0x1000>;
|
|
ranges = <0x0 0x25000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <34 0x8 33 0x8 32 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
tbi-handle = < &tbi1 >;
|
|
phy-handle = < &phy4 >;
|
|
sleep = <&pmc 0x10000000>;
|
|
fsl,magic-packet;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
/* IPIC
|
|
* interrupts cell = <intr #, sense>
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
* sense == 8: Level, low assertion
|
|
* sense == 2: Edge, high-to-low change
|
|
*/
|
|
ipic: pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
|
|
pmc: power@b00 {
|
|
compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
|
|
reg = <0xb00 0x100 0xa00 0x100>;
|
|
interrupts = <80 8>;
|
|
interrupt-parent = <&ipic>;
|
|
fsl,mpc8313-wakeup-timer = <>m1>;
|
|
|
|
/* Remove this (or change to "okay") if you have
|
|
* a REVA3 or later board, if you apply one of the
|
|
* workarounds listed in section 8.5 of the board
|
|
* manual, or if you are adapting this device tree
|
|
* to a different board.
|
|
*/
|
|
status = "fail";
|
|
};
|
|
|
|
gtm1: timer@500 {
|
|
compatible = "fsl,mpc8313-gtm", "fsl,gtm";
|
|
reg = <0x500 0x100>;
|
|
interrupts = <90 8 78 8 84 8 72 8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
timer@600 {
|
|
compatible = "fsl,mpc8313-gtm", "fsl,gtm";
|
|
reg = <0x600 0x100>;
|
|
interrupts = <91 8 79 8 85 8 73 8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
};
|
|
|
|
sleep-nexus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
sleep = <&pmc 0x00010000>;
|
|
ranges;
|
|
|
|
pci0: pci@e0008500 {
|
|
cell-index = <1>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0E -mini PCI */
|
|
0x7000 0x0 0x0 0x1 &ipic 18 0x8
|
|
0x7000 0x0 0x0 0x2 &ipic 18 0x8
|
|
0x7000 0x0 0x0 0x3 &ipic 18 0x8
|
|
0x7000 0x0 0x0 0x4 &ipic 18 0x8
|
|
|
|
/* IDSEL 0x0F - PCI slot */
|
|
0x7800 0x0 0x0 0x1 &ipic 17 0x8
|
|
0x7800 0x0 0x0 0x2 &ipic 18 0x8
|
|
0x7800 0x0 0x0 0x3 &ipic 17 0x8
|
|
0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <66 0x8>;
|
|
bus-range = <0x0 0x0>;
|
|
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
|
|
clock-frequency = <66666666>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008500 0x100 /* internal registers */
|
|
0xe0008300 0x8>; /* config space access registers */
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
};
|
|
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
|
|
reg = <0xe00082a8 4>;
|
|
ranges = <0 0xe0008100 0x1a8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8313-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0 0x28>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
};
|
|
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8313-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0x80 0x28>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <1>;
|
|
};
|
|
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8313-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0x100 0x28>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <2>;
|
|
};
|
|
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8313-dma-channel",
|
|
"fsl,elo-dma-channel";
|
|
reg = <0x180 0x28>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <3>;
|
|
};
|
|
};
|
|
};
|
|
};
|