8d60a903d9
This patch explicitly removes the kgdb implementation, for mips which is intended to be followed by a patch that adds a kgdb implementation for MIPS that makes use of the kgdb core in the kernel. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
360 lines
9.9 KiB
C
360 lines
9.9 KiB
C
/*
|
|
* Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/kernel_stat.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <asm/signal.h>
|
|
#include <asm/system.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/sibyte/sb1250_regs.h>
|
|
#include <asm/sibyte/sb1250_int.h>
|
|
#include <asm/sibyte/sb1250_uart.h>
|
|
#include <asm/sibyte/sb1250_scd.h>
|
|
#include <asm/sibyte/sb1250.h>
|
|
|
|
/*
|
|
* These are the routines that handle all the low level interrupt stuff.
|
|
* Actions handled here are: initialization of the interrupt map, requesting of
|
|
* interrupt lines by handlers, dispatching if interrupts to handlers, probing
|
|
* for interrupt lines
|
|
*/
|
|
|
|
|
|
static void end_sb1250_irq(unsigned int irq);
|
|
static void enable_sb1250_irq(unsigned int irq);
|
|
static void disable_sb1250_irq(unsigned int irq);
|
|
static void ack_sb1250_irq(unsigned int irq);
|
|
#ifdef CONFIG_SMP
|
|
static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SIBYTE_HAS_LDT
|
|
extern unsigned long ldt_eoi_space;
|
|
#endif
|
|
|
|
static struct irq_chip sb1250_irq_type = {
|
|
.name = "SB1250-IMR",
|
|
.ack = ack_sb1250_irq,
|
|
.mask = disable_sb1250_irq,
|
|
.mask_ack = ack_sb1250_irq,
|
|
.unmask = enable_sb1250_irq,
|
|
.end = end_sb1250_irq,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = sb1250_set_affinity
|
|
#endif
|
|
};
|
|
|
|
/* Store the CPU id (not the logical number) */
|
|
int sb1250_irq_owner[SB1250_NR_IRQS];
|
|
|
|
DEFINE_SPINLOCK(sb1250_imr_lock);
|
|
|
|
void sb1250_mask_irq(int cpu, int irq)
|
|
{
|
|
unsigned long flags;
|
|
u64 cur_ints;
|
|
|
|
spin_lock_irqsave(&sb1250_imr_lock, flags);
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
cur_ints |= (((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
|
|
}
|
|
|
|
void sb1250_unmask_irq(int cpu, int irq)
|
|
{
|
|
unsigned long flags;
|
|
u64 cur_ints;
|
|
|
|
spin_lock_irqsave(&sb1250_imr_lock, flags);
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
cur_ints &= ~(((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void sb1250_set_affinity(unsigned int irq, cpumask_t mask)
|
|
{
|
|
int i = 0, old_cpu, cpu, int_on;
|
|
u64 cur_ints;
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
unsigned long flags;
|
|
|
|
i = first_cpu(mask);
|
|
|
|
if (cpus_weight(mask) > 1) {
|
|
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
|
|
return;
|
|
}
|
|
|
|
/* Convert logical CPU to physical CPU */
|
|
cpu = cpu_logical_map(i);
|
|
|
|
/* Protect against other affinity changers and IMR manipulation */
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
spin_lock(&sb1250_imr_lock);
|
|
|
|
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
|
|
old_cpu = sb1250_irq_owner[irq];
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
int_on = !(cur_ints & (((u64) 1) << irq));
|
|
if (int_on) {
|
|
/* If it was on, mask it */
|
|
cur_ints |= (((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
}
|
|
sb1250_irq_owner[irq] = cpu;
|
|
if (int_on) {
|
|
/* unmask for the new CPU */
|
|
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
cur_ints &= ~(((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
|
|
R_IMR_INTERRUPT_MASK));
|
|
}
|
|
spin_unlock(&sb1250_imr_lock);
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
}
|
|
#endif
|
|
|
|
/*****************************************************************************/
|
|
|
|
static void disable_sb1250_irq(unsigned int irq)
|
|
{
|
|
sb1250_mask_irq(sb1250_irq_owner[irq], irq);
|
|
}
|
|
|
|
static void enable_sb1250_irq(unsigned int irq)
|
|
{
|
|
sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
|
|
}
|
|
|
|
|
|
static void ack_sb1250_irq(unsigned int irq)
|
|
{
|
|
#ifdef CONFIG_SIBYTE_HAS_LDT
|
|
u64 pending;
|
|
|
|
/*
|
|
* If the interrupt was an HT interrupt, now is the time to
|
|
* clear it. NOTE: we assume the HT bridge was set up to
|
|
* deliver the interrupts to all CPUs (which makes affinity
|
|
* changing easier for us)
|
|
*/
|
|
pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
|
|
R_IMR_LDT_INTERRUPT)));
|
|
pending &= ((u64)1 << (irq));
|
|
if (pending) {
|
|
int i;
|
|
for (i=0; i<NR_CPUS; i++) {
|
|
int cpu;
|
|
#ifdef CONFIG_SMP
|
|
cpu = cpu_logical_map(i);
|
|
#else
|
|
cpu = i;
|
|
#endif
|
|
/*
|
|
* Clear for all CPUs so an affinity switch
|
|
* doesn't find an old status
|
|
*/
|
|
__raw_writeq(pending,
|
|
IOADDR(A_IMR_REGISTER(cpu,
|
|
R_IMR_LDT_INTERRUPT_CLR)));
|
|
}
|
|
|
|
/*
|
|
* Generate EOI. For Pass 1 parts, EOI is a nop. For
|
|
* Pass 2, the LDT world may be edge-triggered, but
|
|
* this EOI shouldn't hurt. If they are
|
|
* level-sensitive, the EOI is required.
|
|
*/
|
|
*(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
|
|
}
|
|
#endif
|
|
sb1250_mask_irq(sb1250_irq_owner[irq], irq);
|
|
}
|
|
|
|
|
|
static void end_sb1250_irq(unsigned int irq)
|
|
{
|
|
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
|
|
sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
|
|
}
|
|
}
|
|
|
|
|
|
void __init init_sb1250_irqs(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SB1250_NR_IRQS; i++) {
|
|
set_irq_chip(i, &sb1250_irq_type);
|
|
sb1250_irq_owner[i] = 0;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* arch_init_irq is called early in the boot sequence from init/main.c via
|
|
* init_IRQ. It is responsible for setting up the interrupt mapper and
|
|
* installing the handler that will be responsible for dispatching interrupts
|
|
* to the "right" place.
|
|
*/
|
|
/*
|
|
* For now, map all interrupts to IP[2]. We could save
|
|
* some cycles by parceling out system interrupts to different
|
|
* IP lines, but keep it simple for bringup. We'll also direct
|
|
* all interrupts to a single CPU; we should probably route
|
|
* PCI and LDT to one cpu and everything else to the other
|
|
* to balance the load a bit.
|
|
*
|
|
* On the second cpu, everything is set to IP5, which is
|
|
* ignored, EXCEPT the mailbox interrupt. That one is
|
|
* set to IP[2] so it is handled. This is needed so we
|
|
* can do cross-cpu function calls, as requred by SMP
|
|
*/
|
|
|
|
#define IMR_IP2_VAL K_INT_MAP_I0
|
|
#define IMR_IP3_VAL K_INT_MAP_I1
|
|
#define IMR_IP4_VAL K_INT_MAP_I2
|
|
#define IMR_IP5_VAL K_INT_MAP_I3
|
|
#define IMR_IP6_VAL K_INT_MAP_I4
|
|
|
|
void __init arch_init_irq(void)
|
|
{
|
|
|
|
unsigned int i;
|
|
u64 tmp;
|
|
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
|
|
STATUSF_IP1 | STATUSF_IP0;
|
|
|
|
/* Default everything to IP2 */
|
|
for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */
|
|
__raw_writeq(IMR_IP2_VAL,
|
|
IOADDR(A_IMR_REGISTER(0,
|
|
R_IMR_INTERRUPT_MAP_BASE) +
|
|
(i << 3)));
|
|
__raw_writeq(IMR_IP2_VAL,
|
|
IOADDR(A_IMR_REGISTER(1,
|
|
R_IMR_INTERRUPT_MAP_BASE) +
|
|
(i << 3)));
|
|
}
|
|
|
|
init_sb1250_irqs();
|
|
|
|
/*
|
|
* Map the high 16 bits of the mailbox registers to IP[3], for
|
|
* inter-cpu messages
|
|
*/
|
|
/* Was I1 */
|
|
__raw_writeq(IMR_IP3_VAL,
|
|
IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
|
|
(K_INT_MBOX_0 << 3)));
|
|
__raw_writeq(IMR_IP3_VAL,
|
|
IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
|
|
(K_INT_MBOX_0 << 3)));
|
|
|
|
/* Clear the mailboxes. The firmware may leave them dirty */
|
|
__raw_writeq(0xffffffffffffffffULL,
|
|
IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
|
|
__raw_writeq(0xffffffffffffffffULL,
|
|
IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
|
|
|
|
/* Mask everything except the mailbox registers for both cpus */
|
|
tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
|
|
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
|
|
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
|
|
|
|
/*
|
|
* Note that the timer interrupts are also mapped, but this is
|
|
* done in sb1250_time_init(). Also, the profiling driver
|
|
* does its own management of IP7.
|
|
*/
|
|
|
|
/* Enable necessary IPs, disable the rest */
|
|
change_c0_status(ST0_IM, imask);
|
|
}
|
|
|
|
extern void sb1250_mailbox_interrupt(void);
|
|
|
|
static inline void dispatch_ip2(void)
|
|
{
|
|
unsigned int cpu = smp_processor_id();
|
|
unsigned long long mask;
|
|
|
|
/*
|
|
* Default...we've hit an IP[2] interrupt, which means we've got to
|
|
* check the 1250 interrupt registers to figure out what to do. Need
|
|
* to detect which CPU we're on, now that smp_affinity is supported.
|
|
*/
|
|
mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
|
|
R_IMR_INTERRUPT_STATUS_BASE)));
|
|
if (mask)
|
|
do_IRQ(fls64(mask) - 1);
|
|
}
|
|
|
|
asmlinkage void plat_irq_dispatch(void)
|
|
{
|
|
unsigned int cpu = smp_processor_id();
|
|
unsigned int pending;
|
|
|
|
/*
|
|
* What a pain. We have to be really careful saving the upper 32 bits
|
|
* of any * register across function calls if we don't want them
|
|
* trashed--since were running in -o32, the calling routing never saves
|
|
* the full 64 bits of a register across a function call. Being the
|
|
* interrupt handler, we're guaranteed that interrupts are disabled
|
|
* during this code so we don't have to worry about random interrupts
|
|
* blasting the high 32 bits.
|
|
*/
|
|
|
|
pending = read_c0_cause() & read_c0_status() & ST0_IM;
|
|
|
|
if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
|
|
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
|
|
else if (pending & CAUSEF_IP4)
|
|
do_IRQ(K_INT_TIMER_0 + cpu); /* sb1250_timer_interrupt() */
|
|
|
|
#ifdef CONFIG_SMP
|
|
else if (pending & CAUSEF_IP3)
|
|
sb1250_mailbox_interrupt();
|
|
#endif
|
|
|
|
else if (pending & CAUSEF_IP2)
|
|
dispatch_ip2();
|
|
else
|
|
spurious_interrupt();
|
|
}
|