42adb53cb3
The WAN (Sierra Wireless EV-DO) module is very similar to the Bluetooth module. It appears on the USB bus when enabled. It can be controlled via hot key, or directly via ACPI. This change enables direct control via ACPI. I have tested it on my Lenovo Thinkpad X60; I guess it will probably work on other Thinkpad models which come with this module installed. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Ack'd by: Borislav Deianov <borislav@users.sf.net> Signed-off-by: Len Brown <len.brown@intel.com>
2044 lines
46 KiB
C
2044 lines
46 KiB
C
/*
|
|
* ibm_acpi.c - IBM ThinkPad ACPI Extras
|
|
*
|
|
*
|
|
* Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#define IBM_VERSION "0.12a"
|
|
|
|
/*
|
|
* Changelog:
|
|
*
|
|
* 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels
|
|
* 2005-03-17 0.11 support for 600e, 770x
|
|
* thanks to Jamie Lentin <lentinj@dial.pipex.com>
|
|
* support for 770e, G41
|
|
* G40 and G41 don't have a thinklight
|
|
* temperatures no longer experimental
|
|
* experimental brightness control
|
|
* experimental volume control
|
|
* experimental fan enable/disable
|
|
* 2005-01-16 0.10 fix module loading on R30, R31
|
|
* 2005-01-16 0.9 support for 570, R30, R31
|
|
* ultrabay support on A22p, A3x
|
|
* limit arg for cmos, led, beep, drop experimental status
|
|
* more capable led control on A21e, A22p, T20-22, X20
|
|
* experimental temperatures and fan speed
|
|
* experimental embedded controller register dump
|
|
* mark more functions as __init, drop incorrect __exit
|
|
* use MODULE_VERSION
|
|
* thanks to Henrik Brix Andersen <brix@gentoo.org>
|
|
* fix parameter passing on module loading
|
|
* thanks to Rusty Russell <rusty@rustcorp.com.au>
|
|
* thanks to Jim Radford <radford@blackbean.org>
|
|
* 2004-11-08 0.8 fix init error case, don't return from a macro
|
|
* thanks to Chris Wright <chrisw@osdl.org>
|
|
* 2004-10-23 0.7 fix module loading on A21e, A22p, T20, T21, X20
|
|
* fix led control on A21e
|
|
* 2004-10-19 0.6 use acpi_bus_register_driver() to claim HKEY device
|
|
* 2004-10-18 0.5 thinklight support on A21e, G40, R32, T20, T21, X20
|
|
* proc file format changed
|
|
* video_switch command
|
|
* experimental cmos control
|
|
* experimental led control
|
|
* experimental acpi sounds
|
|
* 2004-09-16 0.4 support for module parameters
|
|
* hotkey mask can be prefixed by 0x
|
|
* video output switching
|
|
* video expansion control
|
|
* ultrabay eject support
|
|
* removed lcd brightness/on/off control, didn't work
|
|
* 2004-08-17 0.3 support for R40
|
|
* lcd off, brightness control
|
|
* thinklight on/off
|
|
* 2004-08-14 0.2 support for T series, X20
|
|
* bluetooth enable/disable
|
|
* hotkey events disabled by default
|
|
* removed fan control, currently useless
|
|
* 2004-08-09 0.1 initial release, support for X series
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <acpi/acpi_drivers.h>
|
|
#include <acpi/acnamesp.h>
|
|
|
|
#define IBM_NAME "ibm"
|
|
#define IBM_DESC "IBM ThinkPad ACPI Extras"
|
|
#define IBM_FILE "ibm_acpi"
|
|
#define IBM_URL "http://ibm-acpi.sf.net/"
|
|
|
|
MODULE_AUTHOR("Borislav Deianov");
|
|
MODULE_DESCRIPTION(IBM_DESC);
|
|
MODULE_VERSION(IBM_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define IBM_DIR IBM_NAME
|
|
|
|
#define IBM_LOG IBM_FILE ": "
|
|
#define IBM_ERR KERN_ERR IBM_LOG
|
|
#define IBM_NOTICE KERN_NOTICE IBM_LOG
|
|
#define IBM_INFO KERN_INFO IBM_LOG
|
|
#define IBM_DEBUG KERN_DEBUG IBM_LOG
|
|
|
|
#define IBM_MAX_ACPI_ARGS 3
|
|
|
|
#define __unused __attribute__ ((unused))
|
|
|
|
static int experimental;
|
|
module_param(experimental, int, 0);
|
|
|
|
static acpi_handle root_handle = NULL;
|
|
|
|
#define IBM_HANDLE(object, parent, paths...) \
|
|
static acpi_handle object##_handle; \
|
|
static acpi_handle *object##_parent = &parent##_handle; \
|
|
static char *object##_path; \
|
|
static char *object##_paths[] = { paths }
|
|
|
|
/*
|
|
* The following models are supported to various degrees:
|
|
*
|
|
* 570, 600e, 600x, 770e, 770x
|
|
* A20m, A21e, A21m, A21p, A22p, A30, A30p, A31, A31p
|
|
* G40, G41
|
|
* R30, R31, R32, R40, R40e, R50, R50e, R50p, R51
|
|
* T20, T21, T22, T23, T30, T40, T40p, T41, T41p, T42, T42p, T43
|
|
* X20, X21, X22, X23, X24, X30, X31, X40
|
|
*
|
|
* The following models have no supported features:
|
|
*
|
|
* 240, 240x, i1400
|
|
*
|
|
* Still missing DSDTs for the following models:
|
|
*
|
|
* A20p, A22e, A22m
|
|
* R52
|
|
* S31
|
|
* T43p
|
|
*/
|
|
|
|
IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */
|
|
"\\_SB.PCI.ISA.EC", /* 570 */
|
|
"\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */
|
|
"\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */
|
|
"\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */
|
|
"\\_SB.PCI0.ICH3.EC0", /* R31 */
|
|
"\\_SB.PCI0.LPC.EC", /* all others */
|
|
);
|
|
|
|
IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */
|
|
"\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */
|
|
"\\_SB.PCI0.VID0", /* 770e */
|
|
"\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */
|
|
"\\_SB.PCI0.AGP.VID", /* all others */
|
|
); /* R30, R31 */
|
|
|
|
IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */
|
|
|
|
IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */
|
|
"\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */
|
|
"\\CMS", /* R40, R40e */
|
|
); /* all others */
|
|
#ifdef CONFIG_ACPI_IBM_DOCK
|
|
IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
|
|
"\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
|
|
"\\_SB.PCI0.PCI1.DOCK", /* all others */
|
|
"\\_SB.PCI.ISA.SLCE", /* 570 */
|
|
); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
|
|
#endif
|
|
IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
|
|
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
|
|
"\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
|
|
); /* A21e, R30, R31 */
|
|
|
|
IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
|
|
"_EJ0", /* all others */
|
|
); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
|
|
|
|
IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
|
|
"\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
|
|
); /* all others */
|
|
|
|
IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
|
|
"_EJ0", /* 770x */
|
|
); /* all others */
|
|
|
|
/* don't list other alternatives as we install a notify handler on the 570 */
|
|
IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
|
|
|
|
IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */
|
|
"^HKEY", /* R30, R31 */
|
|
"HKEY", /* all others */
|
|
); /* 570 */
|
|
|
|
IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */
|
|
IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */
|
|
|
|
IBM_HANDLE(led, ec, "SLED", /* 570 */
|
|
"SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
|
|
"LED", /* all others */
|
|
); /* R30, R31 */
|
|
|
|
IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
|
|
IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */
|
|
IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */
|
|
IBM_HANDLE(fans, ec, "FANS"); /* X31, X40 */
|
|
|
|
IBM_HANDLE(gfan, ec, "GFAN", /* 570 */
|
|
"\\FSPD", /* 600e/x, 770e, 770x */
|
|
); /* all others */
|
|
|
|
IBM_HANDLE(sfan, ec, "SFAN", /* 570 */
|
|
"JFNS", /* 770x-JL */
|
|
); /* all others */
|
|
|
|
#define IBM_HKEY_HID "IBM0068"
|
|
#define IBM_PCI_HID "PNP0A03"
|
|
|
|
struct ibm_struct {
|
|
char *name;
|
|
char param[32];
|
|
|
|
char *hid;
|
|
struct acpi_driver *driver;
|
|
|
|
int (*init) (void);
|
|
int (*read) (char *);
|
|
int (*write) (char *);
|
|
void (*exit) (void);
|
|
|
|
void (*notify) (struct ibm_struct *, u32);
|
|
acpi_handle *handle;
|
|
int type;
|
|
struct acpi_device *device;
|
|
|
|
int driver_registered;
|
|
int proc_created;
|
|
int init_called;
|
|
int notify_installed;
|
|
|
|
int experimental;
|
|
};
|
|
|
|
static struct proc_dir_entry *proc_dir = NULL;
|
|
|
|
#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
|
|
#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
|
|
#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
|
|
|
|
static int acpi_evalf(acpi_handle handle,
|
|
void *res, char *method, char *fmt, ...)
|
|
{
|
|
char *fmt0 = fmt;
|
|
struct acpi_object_list params;
|
|
union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
|
|
struct acpi_buffer result, *resultp;
|
|
union acpi_object out_obj;
|
|
acpi_status status;
|
|
va_list ap;
|
|
char res_type;
|
|
int success;
|
|
int quiet;
|
|
|
|
if (!*fmt) {
|
|
printk(IBM_ERR "acpi_evalf() called with empty format\n");
|
|
return 0;
|
|
}
|
|
|
|
if (*fmt == 'q') {
|
|
quiet = 1;
|
|
fmt++;
|
|
} else
|
|
quiet = 0;
|
|
|
|
res_type = *(fmt++);
|
|
|
|
params.count = 0;
|
|
params.pointer = &in_objs[0];
|
|
|
|
va_start(ap, fmt);
|
|
while (*fmt) {
|
|
char c = *(fmt++);
|
|
switch (c) {
|
|
case 'd': /* int */
|
|
in_objs[params.count].integer.value = va_arg(ap, int);
|
|
in_objs[params.count++].type = ACPI_TYPE_INTEGER;
|
|
break;
|
|
/* add more types as needed */
|
|
default:
|
|
printk(IBM_ERR "acpi_evalf() called "
|
|
"with invalid format character '%c'\n", c);
|
|
return 0;
|
|
}
|
|
}
|
|
va_end(ap);
|
|
|
|
if (res_type != 'v') {
|
|
result.length = sizeof(out_obj);
|
|
result.pointer = &out_obj;
|
|
resultp = &result;
|
|
} else
|
|
resultp = NULL;
|
|
|
|
status = acpi_evaluate_object(handle, method, ¶ms, resultp);
|
|
|
|
switch (res_type) {
|
|
case 'd': /* int */
|
|
if (res)
|
|
*(int *)res = out_obj.integer.value;
|
|
success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
|
|
break;
|
|
case 'v': /* void */
|
|
success = status == AE_OK;
|
|
break;
|
|
/* add more types as needed */
|
|
default:
|
|
printk(IBM_ERR "acpi_evalf() called "
|
|
"with invalid format character '%c'\n", res_type);
|
|
return 0;
|
|
}
|
|
|
|
if (!success && !quiet)
|
|
printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
|
|
method, fmt0, status);
|
|
|
|
return success;
|
|
}
|
|
|
|
static void __unused acpi_print_int(acpi_handle handle, char *method)
|
|
{
|
|
int i;
|
|
|
|
if (acpi_evalf(handle, &i, method, "d"))
|
|
printk(IBM_INFO "%s = 0x%x\n", method, i);
|
|
else
|
|
printk(IBM_ERR "error calling %s\n", method);
|
|
}
|
|
|
|
static char *next_cmd(char **cmds)
|
|
{
|
|
char *start = *cmds;
|
|
char *end;
|
|
|
|
while ((end = strchr(start, ',')) && end == start)
|
|
start = end + 1;
|
|
|
|
if (!end)
|
|
return NULL;
|
|
|
|
*end = 0;
|
|
*cmds = end + 1;
|
|
return start;
|
|
}
|
|
|
|
static int driver_init(void)
|
|
{
|
|
printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
|
|
printk(IBM_INFO "%s\n", IBM_URL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int driver_read(char *p)
|
|
{
|
|
int len = 0;
|
|
|
|
len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
|
|
len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int hotkey_supported;
|
|
static int hotkey_mask_supported;
|
|
static int hotkey_orig_status;
|
|
static int hotkey_orig_mask;
|
|
|
|
static int hotkey_get(int *status, int *mask)
|
|
{
|
|
if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
|
|
return 0;
|
|
|
|
if (hotkey_mask_supported)
|
|
if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int hotkey_set(int status, int mask)
|
|
{
|
|
int i;
|
|
|
|
if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
|
|
return 0;
|
|
|
|
if (hotkey_mask_supported)
|
|
for (i = 0; i < 32; i++) {
|
|
int bit = ((1 << i) & mask) != 0;
|
|
if (!acpi_evalf(hkey_handle,
|
|
NULL, "MHKM", "vdd", i + 1, bit))
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int hotkey_init(void)
|
|
{
|
|
/* hotkey not supported on 570 */
|
|
hotkey_supported = hkey_handle != NULL;
|
|
|
|
if (hotkey_supported) {
|
|
/* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
|
|
A30, R30, R31, T20-22, X20-21, X22-24 */
|
|
hotkey_mask_supported =
|
|
acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
|
|
|
|
if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask))
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hotkey_read(char *p)
|
|
{
|
|
int status, mask;
|
|
int len = 0;
|
|
|
|
if (!hotkey_supported) {
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
return len;
|
|
}
|
|
|
|
if (!hotkey_get(&status, &mask))
|
|
return -EIO;
|
|
|
|
len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
|
|
if (hotkey_mask_supported) {
|
|
len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
|
|
len += sprintf(p + len,
|
|
"commands:\tenable, disable, reset, <mask>\n");
|
|
} else {
|
|
len += sprintf(p + len, "mask:\t\tnot supported\n");
|
|
len += sprintf(p + len, "commands:\tenable, disable, reset\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int hotkey_write(char *buf)
|
|
{
|
|
int status, mask;
|
|
char *cmd;
|
|
int do_cmd = 0;
|
|
|
|
if (!hotkey_supported)
|
|
return -ENODEV;
|
|
|
|
if (!hotkey_get(&status, &mask))
|
|
return -EIO;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (strlencmp(cmd, "enable") == 0) {
|
|
status = 1;
|
|
} else if (strlencmp(cmd, "disable") == 0) {
|
|
status = 0;
|
|
} else if (strlencmp(cmd, "reset") == 0) {
|
|
status = hotkey_orig_status;
|
|
mask = hotkey_orig_mask;
|
|
} else if (sscanf(cmd, "0x%x", &mask) == 1) {
|
|
/* mask set */
|
|
} else if (sscanf(cmd, "%x", &mask) == 1) {
|
|
/* mask set */
|
|
} else
|
|
return -EINVAL;
|
|
do_cmd = 1;
|
|
}
|
|
|
|
if (do_cmd && !hotkey_set(status, mask))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hotkey_exit(void)
|
|
{
|
|
if (hotkey_supported)
|
|
hotkey_set(hotkey_orig_status, hotkey_orig_mask);
|
|
}
|
|
|
|
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
|
|
{
|
|
int hkey;
|
|
|
|
if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
|
|
acpi_bus_generate_event(ibm->device, event, hkey);
|
|
else {
|
|
printk(IBM_ERR "unknown hotkey event %d\n", event);
|
|
acpi_bus_generate_event(ibm->device, event, 0);
|
|
}
|
|
}
|
|
|
|
static int bluetooth_supported;
|
|
|
|
static int bluetooth_init(void)
|
|
{
|
|
/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
|
|
G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
|
|
bluetooth_supported = hkey_handle &&
|
|
acpi_evalf(hkey_handle, NULL, "GBDC", "qv");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bluetooth_status(void)
|
|
{
|
|
int status;
|
|
|
|
if (!bluetooth_supported ||
|
|
!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
|
|
status = 0;
|
|
|
|
return status;
|
|
}
|
|
|
|
static int bluetooth_read(char *p)
|
|
{
|
|
int len = 0;
|
|
int status = bluetooth_status();
|
|
|
|
if (!bluetooth_supported)
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
else if (!(status & 1))
|
|
len += sprintf(p + len, "status:\t\tnot installed\n");
|
|
else {
|
|
len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
|
|
len += sprintf(p + len, "commands:\tenable, disable\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int bluetooth_write(char *buf)
|
|
{
|
|
int status = bluetooth_status();
|
|
char *cmd;
|
|
int do_cmd = 0;
|
|
|
|
if (!bluetooth_supported)
|
|
return -ENODEV;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (strlencmp(cmd, "enable") == 0) {
|
|
status |= 2;
|
|
} else if (strlencmp(cmd, "disable") == 0) {
|
|
status &= ~2;
|
|
} else
|
|
return -EINVAL;
|
|
do_cmd = 1;
|
|
}
|
|
|
|
if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wan_supported;
|
|
|
|
static int wan_init(void)
|
|
{
|
|
wan_supported = hkey_handle &&
|
|
acpi_evalf(hkey_handle, NULL, "GWAN", "qv");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wan_status(void)
|
|
{
|
|
int status;
|
|
|
|
if (!wan_supported ||
|
|
!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
|
|
status = 0;
|
|
|
|
return status;
|
|
}
|
|
|
|
static int wan_read(char *p)
|
|
{
|
|
int len = 0;
|
|
int status = wan_status();
|
|
|
|
if (!wan_supported)
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
else if (!(status & 1))
|
|
len += sprintf(p + len, "status:\t\tnot installed\n");
|
|
else {
|
|
len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
|
|
len += sprintf(p + len, "commands:\tenable, disable\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int wan_write(char *buf)
|
|
{
|
|
int status = wan_status();
|
|
char *cmd;
|
|
int do_cmd = 0;
|
|
|
|
if (!wan_supported)
|
|
return -ENODEV;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (strlencmp(cmd, "enable") == 0) {
|
|
status |= 2;
|
|
} else if (strlencmp(cmd, "disable") == 0) {
|
|
status &= ~2;
|
|
} else
|
|
return -EINVAL;
|
|
do_cmd = 1;
|
|
}
|
|
|
|
if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_supported;
|
|
static int video_orig_autosw;
|
|
|
|
#define VIDEO_570 1
|
|
#define VIDEO_770 2
|
|
#define VIDEO_NEW 3
|
|
|
|
static int video_init(void)
|
|
{
|
|
int ivga;
|
|
|
|
if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
|
|
/* G41, assume IVGA doesn't change */
|
|
vid_handle = vid2_handle;
|
|
|
|
if (!vid_handle)
|
|
/* video switching not supported on R30, R31 */
|
|
video_supported = 0;
|
|
else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
|
|
/* 570 */
|
|
video_supported = VIDEO_570;
|
|
else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
|
|
/* 600e/x, 770e, 770x */
|
|
video_supported = VIDEO_770;
|
|
else
|
|
/* all others */
|
|
video_supported = VIDEO_NEW;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int video_status(void)
|
|
{
|
|
int status = 0;
|
|
int i;
|
|
|
|
if (video_supported == VIDEO_570) {
|
|
if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
|
|
status = i & 3;
|
|
} else if (video_supported == VIDEO_770) {
|
|
if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
|
|
status |= 0x01 * i;
|
|
if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
|
|
status |= 0x02 * i;
|
|
} else if (video_supported == VIDEO_NEW) {
|
|
acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
|
|
if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
|
|
status |= 0x02 * i;
|
|
|
|
acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0);
|
|
if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
|
|
status |= 0x01 * i;
|
|
if (acpi_evalf(NULL, &i, "\\VCDD", "d"))
|
|
status |= 0x08 * i;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static int video_autosw(void)
|
|
{
|
|
int autosw = 0;
|
|
|
|
if (video_supported == VIDEO_570)
|
|
acpi_evalf(vid_handle, &autosw, "SWIT", "d");
|
|
else if (video_supported == VIDEO_770 || video_supported == VIDEO_NEW)
|
|
acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
|
|
|
|
return autosw & 1;
|
|
}
|
|
|
|
static int video_read(char *p)
|
|
{
|
|
int status = video_status();
|
|
int autosw = video_autosw();
|
|
int len = 0;
|
|
|
|
if (!video_supported) {
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
return len;
|
|
}
|
|
|
|
len += sprintf(p + len, "status:\t\tsupported\n");
|
|
len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
|
|
len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
|
|
if (video_supported == VIDEO_NEW)
|
|
len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
|
|
len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
|
|
len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
|
|
len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
|
|
if (video_supported == VIDEO_NEW)
|
|
len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
|
|
len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
|
|
len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static int video_switch(void)
|
|
{
|
|
int autosw = video_autosw();
|
|
int ret;
|
|
|
|
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
|
|
return -EIO;
|
|
ret = video_supported == VIDEO_570 ?
|
|
acpi_evalf(ec_handle, NULL, "_Q16", "v") :
|
|
acpi_evalf(vid_handle, NULL, "VSWT", "v");
|
|
acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int video_expand(void)
|
|
{
|
|
if (video_supported == VIDEO_570)
|
|
return acpi_evalf(ec_handle, NULL, "_Q17", "v");
|
|
else if (video_supported == VIDEO_770)
|
|
return acpi_evalf(vid_handle, NULL, "VEXP", "v");
|
|
else
|
|
return acpi_evalf(NULL, NULL, "\\VEXP", "v");
|
|
}
|
|
|
|
static int video_switch2(int status)
|
|
{
|
|
int ret;
|
|
|
|
if (video_supported == VIDEO_570) {
|
|
ret = acpi_evalf(NULL, NULL,
|
|
"\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
|
|
} else if (video_supported == VIDEO_770) {
|
|
int autosw = video_autosw();
|
|
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
|
|
return -EIO;
|
|
|
|
ret = acpi_evalf(vid_handle, NULL,
|
|
"ASWT", "vdd", status * 0x100, 0);
|
|
|
|
acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
|
|
} else {
|
|
ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
|
|
acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int video_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
int enable, disable, status;
|
|
|
|
if (!video_supported)
|
|
return -ENODEV;
|
|
|
|
enable = disable = 0;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (strlencmp(cmd, "lcd_enable") == 0) {
|
|
enable |= 0x01;
|
|
} else if (strlencmp(cmd, "lcd_disable") == 0) {
|
|
disable |= 0x01;
|
|
} else if (strlencmp(cmd, "crt_enable") == 0) {
|
|
enable |= 0x02;
|
|
} else if (strlencmp(cmd, "crt_disable") == 0) {
|
|
disable |= 0x02;
|
|
} else if (video_supported == VIDEO_NEW &&
|
|
strlencmp(cmd, "dvi_enable") == 0) {
|
|
enable |= 0x08;
|
|
} else if (video_supported == VIDEO_NEW &&
|
|
strlencmp(cmd, "dvi_disable") == 0) {
|
|
disable |= 0x08;
|
|
} else if (strlencmp(cmd, "auto_enable") == 0) {
|
|
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
|
|
return -EIO;
|
|
} else if (strlencmp(cmd, "auto_disable") == 0) {
|
|
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0))
|
|
return -EIO;
|
|
} else if (strlencmp(cmd, "video_switch") == 0) {
|
|
if (!video_switch())
|
|
return -EIO;
|
|
} else if (strlencmp(cmd, "expand_toggle") == 0) {
|
|
if (!video_expand())
|
|
return -EIO;
|
|
} else
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (enable || disable) {
|
|
status = (video_status() & 0x0f & ~disable) | enable;
|
|
if (!video_switch2(status))
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void video_exit(void)
|
|
{
|
|
acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw);
|
|
}
|
|
|
|
static int light_supported;
|
|
static int light_status_supported;
|
|
|
|
static int light_init(void)
|
|
{
|
|
/* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
|
|
light_supported = (cmos_handle || lght_handle) && !ledb_handle;
|
|
|
|
if (light_supported)
|
|
/* light status not supported on
|
|
570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
|
|
light_status_supported = acpi_evalf(ec_handle, NULL,
|
|
"KBLT", "qv");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int light_read(char *p)
|
|
{
|
|
int len = 0;
|
|
int status = 0;
|
|
|
|
if (!light_supported) {
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
} else if (!light_status_supported) {
|
|
len += sprintf(p + len, "status:\t\tunknown\n");
|
|
len += sprintf(p + len, "commands:\ton, off\n");
|
|
} else {
|
|
if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
|
|
return -EIO;
|
|
len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
|
|
len += sprintf(p + len, "commands:\ton, off\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int light_write(char *buf)
|
|
{
|
|
int cmos_cmd, lght_cmd;
|
|
char *cmd;
|
|
int success;
|
|
|
|
if (!light_supported)
|
|
return -ENODEV;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (strlencmp(cmd, "on") == 0) {
|
|
cmos_cmd = 0x0c;
|
|
lght_cmd = 1;
|
|
} else if (strlencmp(cmd, "off") == 0) {
|
|
cmos_cmd = 0x0d;
|
|
lght_cmd = 0;
|
|
} else
|
|
return -EINVAL;
|
|
|
|
success = cmos_handle ?
|
|
acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
|
|
acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
|
|
if (!success)
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _sta(acpi_handle handle)
|
|
{
|
|
int status;
|
|
|
|
if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
|
|
status = 0;
|
|
|
|
return status;
|
|
}
|
|
#ifdef CONFIG_ACPI_IBM_DOCK
|
|
#define dock_docked() (_sta(dock_handle) & 1)
|
|
|
|
static int dock_read(char *p)
|
|
{
|
|
int len = 0;
|
|
int docked = dock_docked();
|
|
|
|
if (!dock_handle)
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
else if (!docked)
|
|
len += sprintf(p + len, "status:\t\tundocked\n");
|
|
else {
|
|
len += sprintf(p + len, "status:\t\tdocked\n");
|
|
len += sprintf(p + len, "commands:\tdock, undock\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int dock_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
|
|
if (!dock_docked())
|
|
return -ENODEV;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (strlencmp(cmd, "undock") == 0) {
|
|
if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
|
|
!acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
|
|
return -EIO;
|
|
} else if (strlencmp(cmd, "dock") == 0) {
|
|
if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
|
|
return -EIO;
|
|
} else
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dock_notify(struct ibm_struct *ibm, u32 event)
|
|
{
|
|
int docked = dock_docked();
|
|
int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID);
|
|
|
|
if (event == 1 && !pci) /* 570 */
|
|
acpi_bus_generate_event(ibm->device, event, 1); /* button */
|
|
else if (event == 1 && pci) /* 570 */
|
|
acpi_bus_generate_event(ibm->device, event, 3); /* dock */
|
|
else if (event == 3 && docked)
|
|
acpi_bus_generate_event(ibm->device, event, 1); /* button */
|
|
else if (event == 3 && !docked)
|
|
acpi_bus_generate_event(ibm->device, event, 2); /* undock */
|
|
else if (event == 0 && docked)
|
|
acpi_bus_generate_event(ibm->device, event, 3); /* dock */
|
|
else {
|
|
printk(IBM_ERR "unknown dock event %d, status %d\n",
|
|
event, _sta(dock_handle));
|
|
acpi_bus_generate_event(ibm->device, event, 0); /* unknown */
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int bay_status_supported;
|
|
static int bay_status2_supported;
|
|
static int bay_eject_supported;
|
|
static int bay_eject2_supported;
|
|
|
|
static int bay_init(void)
|
|
{
|
|
bay_status_supported = bay_handle &&
|
|
acpi_evalf(bay_handle, NULL, "_STA", "qv");
|
|
bay_status2_supported = bay2_handle &&
|
|
acpi_evalf(bay2_handle, NULL, "_STA", "qv");
|
|
|
|
bay_eject_supported = bay_handle && bay_ej_handle &&
|
|
(strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
|
|
bay_eject2_supported = bay2_handle && bay2_ej_handle &&
|
|
(strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define bay_occupied(b) (_sta(b##_handle) & 1)
|
|
|
|
static int bay_read(char *p)
|
|
{
|
|
int len = 0;
|
|
int occupied = bay_occupied(bay);
|
|
int occupied2 = bay_occupied(bay2);
|
|
int eject, eject2;
|
|
|
|
len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ?
|
|
(occupied ? "occupied" : "unoccupied") :
|
|
"not supported");
|
|
if (bay_status2_supported)
|
|
len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
|
|
"occupied" : "unoccupied");
|
|
|
|
eject = bay_eject_supported && occupied;
|
|
eject2 = bay_eject2_supported && occupied2;
|
|
|
|
if (eject && eject2)
|
|
len += sprintf(p + len, "commands:\teject, eject2\n");
|
|
else if (eject)
|
|
len += sprintf(p + len, "commands:\teject\n");
|
|
else if (eject2)
|
|
len += sprintf(p + len, "commands:\teject2\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static int bay_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
|
|
if (!bay_eject_supported && !bay_eject2_supported)
|
|
return -ENODEV;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (bay_eject_supported && strlencmp(cmd, "eject") == 0) {
|
|
if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
|
|
return -EIO;
|
|
} else if (bay_eject2_supported &&
|
|
strlencmp(cmd, "eject2") == 0) {
|
|
if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
|
|
return -EIO;
|
|
} else
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bay_notify(struct ibm_struct *ibm, u32 event)
|
|
{
|
|
acpi_bus_generate_event(ibm->device, event, 0);
|
|
}
|
|
|
|
static int cmos_read(char *p)
|
|
{
|
|
int len = 0;
|
|
|
|
/* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
|
|
R30, R31, T20-22, X20-21 */
|
|
if (!cmos_handle)
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
else {
|
|
len += sprintf(p + len, "status:\t\tsupported\n");
|
|
len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int cmos_eval(int cmos_cmd)
|
|
{
|
|
if (cmos_handle)
|
|
return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd);
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
static int cmos_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
int cmos_cmd;
|
|
|
|
if (!cmos_handle)
|
|
return -EINVAL;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
|
|
cmos_cmd >= 0 && cmos_cmd <= 21) {
|
|
/* cmos_cmd set */
|
|
} else
|
|
return -EINVAL;
|
|
|
|
if (!cmos_eval(cmos_cmd))
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int led_supported;
|
|
|
|
#define LED_570 1
|
|
#define LED_OLD 2
|
|
#define LED_NEW 3
|
|
|
|
static int led_init(void)
|
|
{
|
|
if (!led_handle)
|
|
/* led not supported on R30, R31 */
|
|
led_supported = 0;
|
|
else if (strlencmp(led_path, "SLED") == 0)
|
|
/* 570 */
|
|
led_supported = LED_570;
|
|
else if (strlencmp(led_path, "SYSL") == 0)
|
|
/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
|
|
led_supported = LED_OLD;
|
|
else
|
|
/* all others */
|
|
led_supported = LED_NEW;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
|
|
|
|
static int led_read(char *p)
|
|
{
|
|
int len = 0;
|
|
|
|
if (!led_supported) {
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
return len;
|
|
}
|
|
len += sprintf(p + len, "status:\t\tsupported\n");
|
|
|
|
if (led_supported == LED_570) {
|
|
/* 570 */
|
|
int i, status;
|
|
for (i = 0; i < 8; i++) {
|
|
if (!acpi_evalf(ec_handle,
|
|
&status, "GLED", "dd", 1 << i))
|
|
return -EIO;
|
|
len += sprintf(p + len, "%d:\t\t%s\n",
|
|
i, led_status(status));
|
|
}
|
|
}
|
|
|
|
len += sprintf(p + len, "commands:\t"
|
|
"<led> on, <led> off, <led> blink (<led> is 0-7)\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
/* off, on, blink */
|
|
static const int led_sled_arg1[] = { 0, 1, 3 };
|
|
static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
|
|
static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
|
|
static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
|
|
|
|
#define EC_HLCL 0x0c
|
|
#define EC_HLBL 0x0d
|
|
#define EC_HLMS 0x0e
|
|
|
|
static int led_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
int led, ind, ret;
|
|
|
|
if (!led_supported)
|
|
return -ENODEV;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
|
|
return -EINVAL;
|
|
|
|
if (strstr(cmd, "off")) {
|
|
ind = 0;
|
|
} else if (strstr(cmd, "on")) {
|
|
ind = 1;
|
|
} else if (strstr(cmd, "blink")) {
|
|
ind = 2;
|
|
} else
|
|
return -EINVAL;
|
|
|
|
if (led_supported == LED_570) {
|
|
/* 570 */
|
|
led = 1 << led;
|
|
if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
|
|
led, led_sled_arg1[ind]))
|
|
return -EIO;
|
|
} else if (led_supported == LED_OLD) {
|
|
/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
|
|
led = 1 << led;
|
|
ret = ec_write(EC_HLMS, led);
|
|
if (ret >= 0)
|
|
ret =
|
|
ec_write(EC_HLBL, led * led_exp_hlbl[ind]);
|
|
if (ret >= 0)
|
|
ret =
|
|
ec_write(EC_HLCL, led * led_exp_hlcl[ind]);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
/* all others */
|
|
if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
|
|
led, led_led_arg1[ind]))
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int beep_read(char *p)
|
|
{
|
|
int len = 0;
|
|
|
|
if (!beep_handle)
|
|
len += sprintf(p + len, "status:\t\tnot supported\n");
|
|
else {
|
|
len += sprintf(p + len, "status:\t\tsupported\n");
|
|
len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int beep_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
int beep_cmd;
|
|
|
|
if (!beep_handle)
|
|
return -ENODEV;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
|
|
beep_cmd >= 0 && beep_cmd <= 17) {
|
|
/* beep_cmd set */
|
|
} else
|
|
return -EINVAL;
|
|
if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int acpi_ec_read(int i, u8 * p)
|
|
{
|
|
int v;
|
|
|
|
if (ecrd_handle) {
|
|
if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
|
|
return 0;
|
|
*p = v;
|
|
} else {
|
|
if (ec_read(i, p) < 0)
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int acpi_ec_write(int i, u8 v)
|
|
{
|
|
if (ecwr_handle) {
|
|
if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
|
|
return 0;
|
|
} else {
|
|
if (ec_write(i, v) < 0)
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int thermal_tmp_supported;
|
|
static int thermal_updt_supported;
|
|
|
|
static int thermal_init(void)
|
|
{
|
|
/* temperatures not supported on 570, G4x, R30, R31, R32 */
|
|
thermal_tmp_supported = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
|
|
|
|
/* 600e/x, 770e, 770x */
|
|
thermal_updt_supported = acpi_evalf(ec_handle, NULL, "UPDT", "qv");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int thermal_read(char *p)
|
|
{
|
|
int len = 0;
|
|
|
|
if (!thermal_tmp_supported)
|
|
len += sprintf(p + len, "temperatures:\tnot supported\n");
|
|
else {
|
|
int i, t;
|
|
char tmpi[] = "TMPi";
|
|
s8 tmp[8];
|
|
|
|
if (thermal_updt_supported)
|
|
if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
|
|
return -EIO;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
tmpi[3] = '0' + i;
|
|
if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
|
|
return -EIO;
|
|
if (thermal_updt_supported)
|
|
tmp[i] = (t - 2732 + 5) / 10;
|
|
else
|
|
tmp[i] = t;
|
|
}
|
|
|
|
len += sprintf(p + len,
|
|
"temperatures:\t%d %d %d %d %d %d %d %d\n",
|
|
tmp[0], tmp[1], tmp[2], tmp[3],
|
|
tmp[4], tmp[5], tmp[6], tmp[7]);
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static u8 ecdump_regs[256];
|
|
|
|
static int ecdump_read(char *p)
|
|
{
|
|
int len = 0;
|
|
int i, j;
|
|
u8 v;
|
|
|
|
len += sprintf(p + len, "EC "
|
|
" +00 +01 +02 +03 +04 +05 +06 +07"
|
|
" +08 +09 +0a +0b +0c +0d +0e +0f\n");
|
|
for (i = 0; i < 256; i += 16) {
|
|
len += sprintf(p + len, "EC 0x%02x:", i);
|
|
for (j = 0; j < 16; j++) {
|
|
if (!acpi_ec_read(i + j, &v))
|
|
break;
|
|
if (v != ecdump_regs[i + j])
|
|
len += sprintf(p + len, " *%02x", v);
|
|
else
|
|
len += sprintf(p + len, " %02x", v);
|
|
ecdump_regs[i + j] = v;
|
|
}
|
|
len += sprintf(p + len, "\n");
|
|
if (j != 16)
|
|
break;
|
|
}
|
|
|
|
/* These are way too dangerous to advertise openly... */
|
|
#if 0
|
|
len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
|
|
" (<offset> is 00-ff, <value> is 00-ff)\n");
|
|
len += sprintf(p + len, "commands:\t0x<offset> <value> "
|
|
" (<offset> is 00-ff, <value> is 0-255)\n");
|
|
#endif
|
|
return len;
|
|
}
|
|
|
|
static int ecdump_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
int i, v;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
|
|
/* i and v set */
|
|
} else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
|
|
/* i and v set */
|
|
} else
|
|
return -EINVAL;
|
|
if (i >= 0 && i < 256 && v >= 0 && v < 256) {
|
|
if (!acpi_ec_write(i, v))
|
|
return -EIO;
|
|
} else
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brightness_offset = 0x31;
|
|
|
|
static int brightness_read(char *p)
|
|
{
|
|
int len = 0;
|
|
u8 level;
|
|
|
|
if (!acpi_ec_read(brightness_offset, &level)) {
|
|
len += sprintf(p + len, "level:\t\tunreadable\n");
|
|
} else {
|
|
len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
|
|
len += sprintf(p + len, "commands:\tup, down\n");
|
|
len += sprintf(p + len, "commands:\tlevel <level>"
|
|
" (<level> is 0-7)\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
#define BRIGHTNESS_UP 4
|
|
#define BRIGHTNESS_DOWN 5
|
|
|
|
static int brightness_write(char *buf)
|
|
{
|
|
int cmos_cmd, inc, i;
|
|
u8 level;
|
|
int new_level;
|
|
char *cmd;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (!acpi_ec_read(brightness_offset, &level))
|
|
return -EIO;
|
|
level &= 7;
|
|
|
|
if (strlencmp(cmd, "up") == 0) {
|
|
new_level = level == 7 ? 7 : level + 1;
|
|
} else if (strlencmp(cmd, "down") == 0) {
|
|
new_level = level == 0 ? 0 : level - 1;
|
|
} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
|
|
new_level >= 0 && new_level <= 7) {
|
|
/* new_level set */
|
|
} else
|
|
return -EINVAL;
|
|
|
|
cmos_cmd = new_level > level ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
|
|
inc = new_level > level ? 1 : -1;
|
|
for (i = level; i != new_level; i += inc) {
|
|
if (!cmos_eval(cmos_cmd))
|
|
return -EIO;
|
|
if (!acpi_ec_write(brightness_offset, i + inc))
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int volume_offset = 0x30;
|
|
|
|
static int volume_read(char *p)
|
|
{
|
|
int len = 0;
|
|
u8 level;
|
|
|
|
if (!acpi_ec_read(volume_offset, &level)) {
|
|
len += sprintf(p + len, "level:\t\tunreadable\n");
|
|
} else {
|
|
len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
|
|
len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
|
|
len += sprintf(p + len, "commands:\tup, down, mute\n");
|
|
len += sprintf(p + len, "commands:\tlevel <level>"
|
|
" (<level> is 0-15)\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
#define VOLUME_DOWN 0
|
|
#define VOLUME_UP 1
|
|
#define VOLUME_MUTE 2
|
|
|
|
static int volume_write(char *buf)
|
|
{
|
|
int cmos_cmd, inc, i;
|
|
u8 level, mute;
|
|
int new_level, new_mute;
|
|
char *cmd;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (!acpi_ec_read(volume_offset, &level))
|
|
return -EIO;
|
|
new_mute = mute = level & 0x40;
|
|
new_level = level = level & 0xf;
|
|
|
|
if (strlencmp(cmd, "up") == 0) {
|
|
if (mute)
|
|
new_mute = 0;
|
|
else
|
|
new_level = level == 15 ? 15 : level + 1;
|
|
} else if (strlencmp(cmd, "down") == 0) {
|
|
if (mute)
|
|
new_mute = 0;
|
|
else
|
|
new_level = level == 0 ? 0 : level - 1;
|
|
} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
|
|
new_level >= 0 && new_level <= 15) {
|
|
/* new_level set */
|
|
} else if (strlencmp(cmd, "mute") == 0) {
|
|
new_mute = 0x40;
|
|
} else
|
|
return -EINVAL;
|
|
|
|
if (new_level != level) { /* mute doesn't change */
|
|
cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN;
|
|
inc = new_level > level ? 1 : -1;
|
|
|
|
if (mute && (!cmos_eval(cmos_cmd) ||
|
|
!acpi_ec_write(volume_offset, level)))
|
|
return -EIO;
|
|
|
|
for (i = level; i != new_level; i += inc)
|
|
if (!cmos_eval(cmos_cmd) ||
|
|
!acpi_ec_write(volume_offset, i + inc))
|
|
return -EIO;
|
|
|
|
if (mute && (!cmos_eval(VOLUME_MUTE) ||
|
|
!acpi_ec_write(volume_offset,
|
|
new_level + mute)))
|
|
return -EIO;
|
|
}
|
|
|
|
if (new_mute != mute) { /* level doesn't change */
|
|
cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP;
|
|
|
|
if (!cmos_eval(cmos_cmd) ||
|
|
!acpi_ec_write(volume_offset, level + new_mute))
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fan_status_offset = 0x2f;
|
|
static int fan_rpm_offset = 0x84;
|
|
|
|
static int fan_read(char *p)
|
|
{
|
|
int len = 0;
|
|
int s;
|
|
u8 lo, hi, status;
|
|
|
|
if (gfan_handle) {
|
|
/* 570, 600e/x, 770e, 770x */
|
|
if (!acpi_evalf(gfan_handle, &s, NULL, "d"))
|
|
return -EIO;
|
|
|
|
len += sprintf(p + len, "level:\t\t%d\n", s);
|
|
} else {
|
|
/* all except 570, 600e/x, 770e, 770x */
|
|
if (!acpi_ec_read(fan_status_offset, &status))
|
|
len += sprintf(p + len, "status:\t\tunreadable\n");
|
|
else
|
|
len += sprintf(p + len, "status:\t\t%s\n",
|
|
enabled(status, 7));
|
|
|
|
if (!acpi_ec_read(fan_rpm_offset, &lo) ||
|
|
!acpi_ec_read(fan_rpm_offset + 1, &hi))
|
|
len += sprintf(p + len, "speed:\t\tunreadable\n");
|
|
else
|
|
len += sprintf(p + len, "speed:\t\t%d\n",
|
|
(hi << 8) + lo);
|
|
}
|
|
|
|
if (sfan_handle)
|
|
/* 570, 770x-JL */
|
|
len += sprintf(p + len, "commands:\tlevel <level>"
|
|
" (<level> is 0-7)\n");
|
|
if (!gfan_handle)
|
|
/* all except 570, 600e/x, 770e, 770x */
|
|
len += sprintf(p + len, "commands:\tenable, disable\n");
|
|
if (fans_handle)
|
|
/* X31, X40 */
|
|
len += sprintf(p + len, "commands:\tspeed <speed>"
|
|
" (<speed> is 0-65535)\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static int fan_write(char *buf)
|
|
{
|
|
char *cmd;
|
|
int level, speed;
|
|
|
|
while ((cmd = next_cmd(&buf))) {
|
|
if (sfan_handle &&
|
|
sscanf(cmd, "level %d", &level) == 1 &&
|
|
level >= 0 && level <= 7) {
|
|
/* 570, 770x-JL */
|
|
if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
|
|
return -EIO;
|
|
} else if (!gfan_handle && strlencmp(cmd, "enable") == 0) {
|
|
/* all except 570, 600e/x, 770e, 770x */
|
|
if (!acpi_ec_write(fan_status_offset, 0x80))
|
|
return -EIO;
|
|
} else if (!gfan_handle && strlencmp(cmd, "disable") == 0) {
|
|
/* all except 570, 600e/x, 770e, 770x */
|
|
if (!acpi_ec_write(fan_status_offset, 0x00))
|
|
return -EIO;
|
|
} else if (fans_handle &&
|
|
sscanf(cmd, "speed %d", &speed) == 1 &&
|
|
speed >= 0 && speed <= 65535) {
|
|
/* X31, X40 */
|
|
if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
|
|
speed, speed, speed))
|
|
return -EIO;
|
|
} else
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ibm_struct ibms[] = {
|
|
{
|
|
.name = "driver",
|
|
.init = driver_init,
|
|
.read = driver_read,
|
|
},
|
|
{
|
|
.name = "hotkey",
|
|
.hid = IBM_HKEY_HID,
|
|
.init = hotkey_init,
|
|
.read = hotkey_read,
|
|
.write = hotkey_write,
|
|
.exit = hotkey_exit,
|
|
.notify = hotkey_notify,
|
|
.handle = &hkey_handle,
|
|
.type = ACPI_DEVICE_NOTIFY,
|
|
},
|
|
{
|
|
.name = "bluetooth",
|
|
.init = bluetooth_init,
|
|
.read = bluetooth_read,
|
|
.write = bluetooth_write,
|
|
},
|
|
{
|
|
.name = "wan",
|
|
.init = wan_init,
|
|
.read = wan_read,
|
|
.write = wan_write,
|
|
.experimental = 1,
|
|
},
|
|
{
|
|
.name = "video",
|
|
.init = video_init,
|
|
.read = video_read,
|
|
.write = video_write,
|
|
.exit = video_exit,
|
|
},
|
|
{
|
|
.name = "light",
|
|
.init = light_init,
|
|
.read = light_read,
|
|
.write = light_write,
|
|
},
|
|
#ifdef CONFIG_ACPI_IBM_DOCK
|
|
{
|
|
.name = "dock",
|
|
.read = dock_read,
|
|
.write = dock_write,
|
|
.notify = dock_notify,
|
|
.handle = &dock_handle,
|
|
.type = ACPI_SYSTEM_NOTIFY,
|
|
},
|
|
{
|
|
.name = "dock",
|
|
.hid = IBM_PCI_HID,
|
|
.notify = dock_notify,
|
|
.handle = &pci_handle,
|
|
.type = ACPI_SYSTEM_NOTIFY,
|
|
},
|
|
#endif
|
|
{
|
|
.name = "bay",
|
|
.init = bay_init,
|
|
.read = bay_read,
|
|
.write = bay_write,
|
|
.notify = bay_notify,
|
|
.handle = &bay_handle,
|
|
.type = ACPI_SYSTEM_NOTIFY,
|
|
},
|
|
{
|
|
.name = "cmos",
|
|
.read = cmos_read,
|
|
.write = cmos_write,
|
|
},
|
|
{
|
|
.name = "led",
|
|
.init = led_init,
|
|
.read = led_read,
|
|
.write = led_write,
|
|
},
|
|
{
|
|
.name = "beep",
|
|
.read = beep_read,
|
|
.write = beep_write,
|
|
},
|
|
{
|
|
.name = "thermal",
|
|
.init = thermal_init,
|
|
.read = thermal_read,
|
|
},
|
|
{
|
|
.name = "ecdump",
|
|
.read = ecdump_read,
|
|
.write = ecdump_write,
|
|
.experimental = 1,
|
|
},
|
|
{
|
|
.name = "brightness",
|
|
.read = brightness_read,
|
|
.write = brightness_write,
|
|
.experimental = 1,
|
|
},
|
|
{
|
|
.name = "volume",
|
|
.read = volume_read,
|
|
.write = volume_write,
|
|
.experimental = 1,
|
|
},
|
|
{
|
|
.name = "fan",
|
|
.read = fan_read,
|
|
.write = fan_write,
|
|
.experimental = 1,
|
|
},
|
|
};
|
|
|
|
static int dispatch_read(char *page, char **start, off_t off, int count,
|
|
int *eof, void *data)
|
|
{
|
|
struct ibm_struct *ibm = (struct ibm_struct *)data;
|
|
int len;
|
|
|
|
if (!ibm || !ibm->read)
|
|
return -EINVAL;
|
|
|
|
len = ibm->read(page);
|
|
if (len < 0)
|
|
return len;
|
|
|
|
if (len <= off + count)
|
|
*eof = 1;
|
|
*start = page + off;
|
|
len -= off;
|
|
if (len > count)
|
|
len = count;
|
|
if (len < 0)
|
|
len = 0;
|
|
|
|
return len;
|
|
}
|
|
|
|
static int dispatch_write(struct file *file, const char __user * userbuf,
|
|
unsigned long count, void *data)
|
|
{
|
|
struct ibm_struct *ibm = (struct ibm_struct *)data;
|
|
char *kernbuf;
|
|
int ret;
|
|
|
|
if (!ibm || !ibm->write)
|
|
return -EINVAL;
|
|
|
|
kernbuf = kmalloc(count + 2, GFP_KERNEL);
|
|
if (!kernbuf)
|
|
return -ENOMEM;
|
|
|
|
if (copy_from_user(kernbuf, userbuf, count)) {
|
|
kfree(kernbuf);
|
|
return -EFAULT;
|
|
}
|
|
|
|
kernbuf[count] = 0;
|
|
strcat(kernbuf, ",");
|
|
ret = ibm->write(kernbuf);
|
|
if (ret == 0)
|
|
ret = count;
|
|
|
|
kfree(kernbuf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dispatch_notify(acpi_handle handle, u32 event, void *data)
|
|
{
|
|
struct ibm_struct *ibm = (struct ibm_struct *)data;
|
|
|
|
if (!ibm || !ibm->notify)
|
|
return;
|
|
|
|
ibm->notify(ibm, event);
|
|
}
|
|
|
|
static int __init setup_notify(struct ibm_struct *ibm)
|
|
{
|
|
acpi_status status;
|
|
int ret;
|
|
|
|
if (!*ibm->handle)
|
|
return 0;
|
|
|
|
ret = acpi_bus_get_device(*ibm->handle, &ibm->device);
|
|
if (ret < 0) {
|
|
printk(IBM_ERR "%s device not present\n", ibm->name);
|
|
return 0;
|
|
}
|
|
|
|
acpi_driver_data(ibm->device) = ibm;
|
|
sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name);
|
|
|
|
status = acpi_install_notify_handler(*ibm->handle, ibm->type,
|
|
dispatch_notify, ibm);
|
|
if (ACPI_FAILURE(status)) {
|
|
printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
|
|
ibm->name, status);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init ibm_device_add(struct acpi_device *device)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int __init register_driver(struct ibm_struct *ibm)
|
|
{
|
|
int ret;
|
|
|
|
ibm->driver = kmalloc(sizeof(struct acpi_driver), GFP_KERNEL);
|
|
if (!ibm->driver) {
|
|
printk(IBM_ERR "kmalloc(ibm->driver) failed\n");
|
|
return -1;
|
|
}
|
|
|
|
memset(ibm->driver, 0, sizeof(struct acpi_driver));
|
|
sprintf(ibm->driver->name, "%s/%s", IBM_NAME, ibm->name);
|
|
ibm->driver->ids = ibm->hid;
|
|
ibm->driver->ops.add = &ibm_device_add;
|
|
|
|
ret = acpi_bus_register_driver(ibm->driver);
|
|
if (ret < 0) {
|
|
printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
|
|
ibm->hid, ret);
|
|
kfree(ibm->driver);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init ibm_init(struct ibm_struct *ibm)
|
|
{
|
|
int ret;
|
|
struct proc_dir_entry *entry;
|
|
|
|
if (ibm->experimental && !experimental)
|
|
return 0;
|
|
|
|
if (ibm->hid) {
|
|
ret = register_driver(ibm);
|
|
if (ret < 0)
|
|
return ret;
|
|
ibm->driver_registered = 1;
|
|
}
|
|
|
|
if (ibm->init) {
|
|
ret = ibm->init();
|
|
if (ret != 0)
|
|
return ret;
|
|
ibm->init_called = 1;
|
|
}
|
|
|
|
if (ibm->read) {
|
|
entry = create_proc_entry(ibm->name,
|
|
S_IFREG | S_IRUGO | S_IWUSR,
|
|
proc_dir);
|
|
if (!entry) {
|
|
printk(IBM_ERR "unable to create proc entry %s\n",
|
|
ibm->name);
|
|
return -ENODEV;
|
|
}
|
|
entry->owner = THIS_MODULE;
|
|
entry->data = ibm;
|
|
entry->read_proc = &dispatch_read;
|
|
if (ibm->write)
|
|
entry->write_proc = &dispatch_write;
|
|
ibm->proc_created = 1;
|
|
}
|
|
|
|
if (ibm->notify) {
|
|
ret = setup_notify(ibm);
|
|
if (ret < 0)
|
|
return ret;
|
|
ibm->notify_installed = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ibm_exit(struct ibm_struct *ibm)
|
|
{
|
|
if (ibm->notify_installed)
|
|
acpi_remove_notify_handler(*ibm->handle, ibm->type,
|
|
dispatch_notify);
|
|
|
|
if (ibm->proc_created)
|
|
remove_proc_entry(ibm->name, proc_dir);
|
|
|
|
if (ibm->init_called && ibm->exit)
|
|
ibm->exit();
|
|
|
|
if (ibm->driver_registered) {
|
|
acpi_bus_unregister_driver(ibm->driver);
|
|
kfree(ibm->driver);
|
|
}
|
|
}
|
|
|
|
static void __init ibm_handle_init(char *name,
|
|
acpi_handle * handle, acpi_handle parent,
|
|
char **paths, int num_paths, char **path)
|
|
{
|
|
int i;
|
|
acpi_status status;
|
|
|
|
for (i = 0; i < num_paths; i++) {
|
|
status = acpi_get_handle(parent, paths[i], handle);
|
|
if (ACPI_SUCCESS(status)) {
|
|
*path = paths[i];
|
|
return;
|
|
}
|
|
}
|
|
|
|
*handle = NULL;
|
|
}
|
|
|
|
#define IBM_HANDLE_INIT(object) \
|
|
ibm_handle_init(#object, &object##_handle, *object##_parent, \
|
|
object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
|
|
|
|
static int set_ibm_param(const char *val, struct kernel_param *kp)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ibms); i++)
|
|
if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) {
|
|
if (strlen(val) > sizeof(ibms[i].param) - 2)
|
|
return -ENOSPC;
|
|
strcpy(ibms[i].param, val);
|
|
strcat(ibms[i].param, ",");
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
#define IBM_PARAM(feature) \
|
|
module_param_call(feature, set_ibm_param, NULL, NULL, 0)
|
|
|
|
IBM_PARAM(hotkey);
|
|
IBM_PARAM(bluetooth);
|
|
IBM_PARAM(video);
|
|
IBM_PARAM(light);
|
|
#ifdef CONFIG_ACPI_IBM_DOCK
|
|
IBM_PARAM(dock);
|
|
#endif
|
|
IBM_PARAM(bay);
|
|
IBM_PARAM(cmos);
|
|
IBM_PARAM(led);
|
|
IBM_PARAM(beep);
|
|
IBM_PARAM(ecdump);
|
|
IBM_PARAM(brightness);
|
|
IBM_PARAM(volume);
|
|
IBM_PARAM(fan);
|
|
|
|
static void acpi_ibm_exit(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--)
|
|
ibm_exit(&ibms[i]);
|
|
|
|
remove_proc_entry(IBM_DIR, acpi_root_dir);
|
|
}
|
|
|
|
static int __init acpi_ibm_init(void)
|
|
{
|
|
int ret, i;
|
|
|
|
if (acpi_disabled)
|
|
return -ENODEV;
|
|
|
|
if (!acpi_specific_hotkey_enabled) {
|
|
printk(IBM_ERR "using generic hotkey driver\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* ec is required because many other handles are relative to it */
|
|
IBM_HANDLE_INIT(ec);
|
|
if (!ec_handle) {
|
|
printk(IBM_ERR "ec object not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* these handles are not required */
|
|
IBM_HANDLE_INIT(vid);
|
|
IBM_HANDLE_INIT(vid2);
|
|
IBM_HANDLE_INIT(ledb);
|
|
IBM_HANDLE_INIT(led);
|
|
IBM_HANDLE_INIT(hkey);
|
|
IBM_HANDLE_INIT(lght);
|
|
IBM_HANDLE_INIT(cmos);
|
|
#ifdef CONFIG_ACPI_IBM_DOCK
|
|
IBM_HANDLE_INIT(dock);
|
|
#endif
|
|
IBM_HANDLE_INIT(pci);
|
|
IBM_HANDLE_INIT(bay);
|
|
if (bay_handle)
|
|
IBM_HANDLE_INIT(bay_ej);
|
|
IBM_HANDLE_INIT(bay2);
|
|
if (bay2_handle)
|
|
IBM_HANDLE_INIT(bay2_ej);
|
|
IBM_HANDLE_INIT(beep);
|
|
IBM_HANDLE_INIT(ecrd);
|
|
IBM_HANDLE_INIT(ecwr);
|
|
IBM_HANDLE_INIT(fans);
|
|
IBM_HANDLE_INIT(gfan);
|
|
IBM_HANDLE_INIT(sfan);
|
|
|
|
proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir);
|
|
if (!proc_dir) {
|
|
printk(IBM_ERR "unable to create proc dir %s", IBM_DIR);
|
|
return -ENODEV;
|
|
}
|
|
proc_dir->owner = THIS_MODULE;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ibms); i++) {
|
|
ret = ibm_init(&ibms[i]);
|
|
if (ret >= 0 && *ibms[i].param)
|
|
ret = ibms[i].write(ibms[i].param);
|
|
if (ret < 0) {
|
|
acpi_ibm_exit();
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
module_init(acpi_ibm_init);
|
|
module_exit(acpi_ibm_exit);
|