626e2acfdc
Note that I have not been able to find anyone with this hardware. I tried contacting the author without success, searched on eBay and similar places without luck either. So this conversion is untested. That said, it was pretty straightforward so it is time to have this driver join the V4L2 world at last. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
995 lines
25 KiB
C
995 lines
25 KiB
C
/*
|
|
Winbond w9966cf Webcam parport driver.
|
|
|
|
Version 0.33
|
|
|
|
Copyright (C) 2001 Jakob Kemi <jakob.kemi@post.utfors.se>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
/*
|
|
Supported devices:
|
|
*Lifeview FlyCam Supra (using the Philips saa7111a chip)
|
|
|
|
Does any other model using the w9966 interface chip exist ?
|
|
|
|
Todo:
|
|
|
|
*Add a working EPP mode, since DMA ECP read isn't implemented
|
|
in the parport drivers. (That's why it's so sloow)
|
|
|
|
*Add support for other ccd-control chips than the saa7111
|
|
please send me feedback on what kind of chips you have.
|
|
|
|
*Add proper probing. I don't know what's wrong with the IEEE1284
|
|
parport drivers but (IEEE1284_MODE_NIBBLE|IEEE1284_DEVICE_ID)
|
|
and nibble read seems to be broken for some peripherals.
|
|
|
|
*Add probing for onboard SRAM, port directions etc. (if possible)
|
|
|
|
*Add support for the hardware compressed modes (maybe using v4l2)
|
|
|
|
*Fix better support for the capture window (no skewed images, v4l
|
|
interface to capt. window)
|
|
|
|
*Probably some bugs that I don't know of
|
|
|
|
Please support me by sending feedback!
|
|
|
|
Changes:
|
|
|
|
Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE
|
|
and owner support for newer module locks
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/version.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/slab.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <linux/parport.h>
|
|
|
|
/*#define DEBUG*/ /* Undef me for production */
|
|
|
|
#ifdef DEBUG
|
|
#define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a)
|
|
#else
|
|
#define DPRINTF(x...)
|
|
#endif
|
|
|
|
/*
|
|
* Defines, simple typedefs etc.
|
|
*/
|
|
|
|
#define W9966_DRIVERNAME "W9966CF Webcam"
|
|
#define W9966_MAXCAMS 4 /* Maximum number of cameras */
|
|
#define W9966_RBUFFER 2048 /* Read buffer (must be an even number) */
|
|
#define W9966_SRAMSIZE 131072 /* 128kb */
|
|
#define W9966_SRAMID 0x02 /* check w9966cf.pdf */
|
|
|
|
/* Empirically determined window limits */
|
|
#define W9966_WND_MIN_X 16
|
|
#define W9966_WND_MIN_Y 14
|
|
#define W9966_WND_MAX_X 705
|
|
#define W9966_WND_MAX_Y 253
|
|
#define W9966_WND_MAX_W (W9966_WND_MAX_X - W9966_WND_MIN_X)
|
|
#define W9966_WND_MAX_H (W9966_WND_MAX_Y - W9966_WND_MIN_Y)
|
|
|
|
/* Keep track of our current state */
|
|
#define W9966_STATE_PDEV 0x01
|
|
#define W9966_STATE_CLAIMED 0x02
|
|
#define W9966_STATE_VDEV 0x04
|
|
|
|
#define W9966_I2C_W_ID 0x48
|
|
#define W9966_I2C_R_ID 0x49
|
|
#define W9966_I2C_R_DATA 0x08
|
|
#define W9966_I2C_R_CLOCK 0x04
|
|
#define W9966_I2C_W_DATA 0x02
|
|
#define W9966_I2C_W_CLOCK 0x01
|
|
|
|
struct w9966 {
|
|
struct v4l2_device v4l2_dev;
|
|
unsigned char dev_state;
|
|
unsigned char i2c_state;
|
|
unsigned short ppmode;
|
|
struct parport *pport;
|
|
struct pardevice *pdev;
|
|
struct video_device vdev;
|
|
unsigned short width;
|
|
unsigned short height;
|
|
unsigned char brightness;
|
|
signed char contrast;
|
|
signed char color;
|
|
signed char hue;
|
|
struct mutex lock;
|
|
};
|
|
|
|
/*
|
|
* Module specific properties
|
|
*/
|
|
|
|
MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>");
|
|
MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
#ifdef MODULE
|
|
static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""};
|
|
#else
|
|
static const char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"};
|
|
#endif
|
|
module_param_array(pardev, charp, NULL, 0);
|
|
MODULE_PARM_DESC(pardev, "pardev: where to search for\n"
|
|
"\teach camera. 'aggressive' means brute-force search.\n"
|
|
"\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n"
|
|
"\tcam 1 to parport3 and search every parport for cam 2 etc...");
|
|
|
|
static int parmode;
|
|
module_param(parmode, int, 0);
|
|
MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp");
|
|
|
|
static int video_nr = -1;
|
|
module_param(video_nr, int, 0);
|
|
|
|
static struct w9966 w9966_cams[W9966_MAXCAMS];
|
|
|
|
/*
|
|
* Private function defines
|
|
*/
|
|
|
|
|
|
/* Set camera phase flags, so we know what to uninit when terminating */
|
|
static inline void w9966_set_state(struct w9966 *cam, int mask, int val)
|
|
{
|
|
cam->dev_state = (cam->dev_state & ~mask) ^ val;
|
|
}
|
|
|
|
/* Get camera phase flags */
|
|
static inline int w9966_get_state(struct w9966 *cam, int mask, int val)
|
|
{
|
|
return ((cam->dev_state & mask) == val);
|
|
}
|
|
|
|
/* Claim parport for ourself */
|
|
static void w9966_pdev_claim(struct w9966 *cam)
|
|
{
|
|
if (w9966_get_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED))
|
|
return;
|
|
parport_claim_or_block(cam->pdev);
|
|
w9966_set_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED);
|
|
}
|
|
|
|
/* Release parport for others to use */
|
|
static void w9966_pdev_release(struct w9966 *cam)
|
|
{
|
|
if (w9966_get_state(cam, W9966_STATE_CLAIMED, 0))
|
|
return;
|
|
parport_release(cam->pdev);
|
|
w9966_set_state(cam, W9966_STATE_CLAIMED, 0);
|
|
}
|
|
|
|
/* Read register from W9966 interface-chip
|
|
Expects a claimed pdev
|
|
-1 on error, else register data (byte) */
|
|
static int w9966_read_reg(struct w9966 *cam, int reg)
|
|
{
|
|
/* ECP, read, regtransfer, REG, REG, REG, REG, REG */
|
|
const unsigned char addr = 0x80 | (reg & 0x1f);
|
|
unsigned char val;
|
|
|
|
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
|
|
return -1;
|
|
if (parport_write(cam->pport, &addr, 1) != 1)
|
|
return -1;
|
|
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0)
|
|
return -1;
|
|
if (parport_read(cam->pport, &val, 1) != 1)
|
|
return -1;
|
|
|
|
return val;
|
|
}
|
|
|
|
/* Write register to W9966 interface-chip
|
|
Expects a claimed pdev
|
|
-1 on error */
|
|
static int w9966_write_reg(struct w9966 *cam, int reg, int data)
|
|
{
|
|
/* ECP, write, regtransfer, REG, REG, REG, REG, REG */
|
|
const unsigned char addr = 0xc0 | (reg & 0x1f);
|
|
const unsigned char val = data;
|
|
|
|
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
|
|
return -1;
|
|
if (parport_write(cam->pport, &addr, 1) != 1)
|
|
return -1;
|
|
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0)
|
|
return -1;
|
|
if (parport_write(cam->pport, &val, 1) != 1)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Ugly and primitive i2c protocol functions
|
|
*/
|
|
|
|
/* Sets the data line on the i2c bus.
|
|
Expects a claimed pdev. */
|
|
static void w9966_i2c_setsda(struct w9966 *cam, int state)
|
|
{
|
|
if (state)
|
|
cam->i2c_state |= W9966_I2C_W_DATA;
|
|
else
|
|
cam->i2c_state &= ~W9966_I2C_W_DATA;
|
|
|
|
w9966_write_reg(cam, 0x18, cam->i2c_state);
|
|
udelay(5);
|
|
}
|
|
|
|
/* Get peripheral clock line
|
|
Expects a claimed pdev. */
|
|
static int w9966_i2c_getscl(struct w9966 *cam)
|
|
{
|
|
const unsigned char state = w9966_read_reg(cam, 0x18);
|
|
return ((state & W9966_I2C_R_CLOCK) > 0);
|
|
}
|
|
|
|
/* Sets the clock line on the i2c bus.
|
|
Expects a claimed pdev. -1 on error */
|
|
static int w9966_i2c_setscl(struct w9966 *cam, int state)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
if (state)
|
|
cam->i2c_state |= W9966_I2C_W_CLOCK;
|
|
else
|
|
cam->i2c_state &= ~W9966_I2C_W_CLOCK;
|
|
|
|
w9966_write_reg(cam, 0x18, cam->i2c_state);
|
|
udelay(5);
|
|
|
|
/* we go to high, we also expect the peripheral to ack. */
|
|
if (state) {
|
|
timeout = jiffies + 100;
|
|
while (!w9966_i2c_getscl(cam)) {
|
|
if (time_after(jiffies, timeout))
|
|
return -1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
/* Get peripheral data line
|
|
Expects a claimed pdev. */
|
|
static int w9966_i2c_getsda(struct w9966 *cam)
|
|
{
|
|
const unsigned char state = w9966_read_reg(cam, 0x18);
|
|
return ((state & W9966_I2C_R_DATA) > 0);
|
|
}
|
|
#endif
|
|
|
|
/* Write a byte with ack to the i2c bus.
|
|
Expects a claimed pdev. -1 on error */
|
|
static int w9966_i2c_wbyte(struct w9966 *cam, int data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 7; i >= 0; i--) {
|
|
w9966_i2c_setsda(cam, (data >> i) & 0x01);
|
|
|
|
if (w9966_i2c_setscl(cam, 1) == -1)
|
|
return -1;
|
|
w9966_i2c_setscl(cam, 0);
|
|
}
|
|
|
|
w9966_i2c_setsda(cam, 1);
|
|
|
|
if (w9966_i2c_setscl(cam, 1) == -1)
|
|
return -1;
|
|
w9966_i2c_setscl(cam, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Read a data byte with ack from the i2c-bus
|
|
Expects a claimed pdev. -1 on error */
|
|
#if 0
|
|
static int w9966_i2c_rbyte(struct w9966 *cam)
|
|
{
|
|
unsigned char data = 0x00;
|
|
int i;
|
|
|
|
w9966_i2c_setsda(cam, 1);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (w9966_i2c_setscl(cam, 1) == -1)
|
|
return -1;
|
|
data = data << 1;
|
|
if (w9966_i2c_getsda(cam))
|
|
data |= 0x01;
|
|
|
|
w9966_i2c_setscl(cam, 0);
|
|
}
|
|
return data;
|
|
}
|
|
#endif
|
|
|
|
/* Read a register from the i2c device.
|
|
Expects claimed pdev. -1 on error */
|
|
#if 0
|
|
static int w9966_read_reg_i2c(struct w9966 *cam, int reg)
|
|
{
|
|
int data;
|
|
|
|
w9966_i2c_setsda(cam, 0);
|
|
w9966_i2c_setscl(cam, 0);
|
|
|
|
if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 ||
|
|
w9966_i2c_wbyte(cam, reg) == -1)
|
|
return -1;
|
|
|
|
w9966_i2c_setsda(cam, 1);
|
|
if (w9966_i2c_setscl(cam, 1) == -1)
|
|
return -1;
|
|
w9966_i2c_setsda(cam, 0);
|
|
w9966_i2c_setscl(cam, 0);
|
|
|
|
if (w9966_i2c_wbyte(cam, W9966_I2C_R_ID) == -1)
|
|
return -1;
|
|
data = w9966_i2c_rbyte(cam);
|
|
if (data == -1)
|
|
return -1;
|
|
|
|
w9966_i2c_setsda(cam, 0);
|
|
|
|
if (w9966_i2c_setscl(cam, 1) == -1)
|
|
return -1;
|
|
w9966_i2c_setsda(cam, 1);
|
|
|
|
return data;
|
|
}
|
|
#endif
|
|
|
|
/* Write a register to the i2c device.
|
|
Expects claimed pdev. -1 on error */
|
|
static int w9966_write_reg_i2c(struct w9966 *cam, int reg, int data)
|
|
{
|
|
w9966_i2c_setsda(cam, 0);
|
|
w9966_i2c_setscl(cam, 0);
|
|
|
|
if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 ||
|
|
w9966_i2c_wbyte(cam, reg) == -1 ||
|
|
w9966_i2c_wbyte(cam, data) == -1)
|
|
return -1;
|
|
|
|
w9966_i2c_setsda(cam, 0);
|
|
if (w9966_i2c_setscl(cam, 1) == -1)
|
|
return -1;
|
|
|
|
w9966_i2c_setsda(cam, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Find a good length for capture window (used both for W and H)
|
|
A bit ugly but pretty functional. The capture length
|
|
have to match the downscale */
|
|
static int w9966_findlen(int near, int size, int maxlen)
|
|
{
|
|
int bestlen = size;
|
|
int besterr = abs(near - bestlen);
|
|
int len;
|
|
|
|
for (len = size + 1; len < maxlen; len++) {
|
|
int err;
|
|
if (((64 * size) % len) != 0)
|
|
continue;
|
|
|
|
err = abs(near - len);
|
|
|
|
/* Only continue as long as we keep getting better values */
|
|
if (err > besterr)
|
|
break;
|
|
|
|
besterr = err;
|
|
bestlen = len;
|
|
}
|
|
|
|
return bestlen;
|
|
}
|
|
|
|
/* Modify capture window (if necessary)
|
|
and calculate downscaling
|
|
Return -1 on error */
|
|
static int w9966_calcscale(int size, int min, int max, int *beg, int *end, unsigned char *factor)
|
|
{
|
|
int maxlen = max - min;
|
|
int len = *end - *beg + 1;
|
|
int newlen = w9966_findlen(len, size, maxlen);
|
|
int err = newlen - len;
|
|
|
|
/* Check for bad format */
|
|
if (newlen > maxlen || newlen < size)
|
|
return -1;
|
|
|
|
/* Set factor (6 bit fixed) */
|
|
*factor = (64 * size) / newlen;
|
|
if (*factor == 64)
|
|
*factor = 0x00; /* downscale is disabled */
|
|
else
|
|
*factor |= 0x80; /* set downscale-enable bit */
|
|
|
|
/* Modify old beginning and end */
|
|
*beg -= err / 2;
|
|
*end += err - (err / 2);
|
|
|
|
/* Move window if outside borders */
|
|
if (*beg < min) {
|
|
*end += min - *beg;
|
|
*beg += min - *beg;
|
|
}
|
|
if (*end > max) {
|
|
*beg -= *end - max;
|
|
*end -= *end - max;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Setup the cameras capture window etc.
|
|
Expects a claimed pdev
|
|
return -1 on error */
|
|
static int w9966_setup(struct w9966 *cam, int x1, int y1, int x2, int y2, int w, int h)
|
|
{
|
|
unsigned int i;
|
|
unsigned int enh_s, enh_e;
|
|
unsigned char scale_x, scale_y;
|
|
unsigned char regs[0x1c];
|
|
unsigned char saa7111_regs[] = {
|
|
0x21, 0x00, 0xd8, 0x23, 0x00, 0x80, 0x80, 0x00,
|
|
0x88, 0x10, 0x80, 0x40, 0x40, 0x00, 0x01, 0x00,
|
|
0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0
|
|
};
|
|
|
|
|
|
if (w * h * 2 > W9966_SRAMSIZE) {
|
|
DPRINTF("capture window exceeds SRAM size!.\n");
|
|
w = 200; h = 160; /* Pick default values */
|
|
}
|
|
|
|
w &= ~0x1;
|
|
if (w < 2)
|
|
w = 2;
|
|
if (h < 1)
|
|
h = 1;
|
|
if (w > W9966_WND_MAX_W)
|
|
w = W9966_WND_MAX_W;
|
|
if (h > W9966_WND_MAX_H)
|
|
h = W9966_WND_MAX_H;
|
|
|
|
cam->width = w;
|
|
cam->height = h;
|
|
|
|
enh_s = 0;
|
|
enh_e = w * h * 2;
|
|
|
|
/* Modify capture window if necessary and calculate downscaling */
|
|
if (w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 ||
|
|
w9966_calcscale(h, W9966_WND_MIN_Y, W9966_WND_MAX_Y, &y1, &y2, &scale_y) != 0)
|
|
return -1;
|
|
|
|
DPRINTF("%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n",
|
|
w, h, x1, x2, y1, y2, scale_x & ~0x80, scale_y & ~0x80);
|
|
|
|
/* Setup registers */
|
|
regs[0x00] = 0x00; /* Set normal operation */
|
|
regs[0x01] = 0x18; /* Capture mode */
|
|
regs[0x02] = scale_y; /* V-scaling */
|
|
regs[0x03] = scale_x; /* H-scaling */
|
|
|
|
/* Capture window */
|
|
regs[0x04] = (x1 & 0x0ff); /* X-start (8 low bits) */
|
|
regs[0x05] = (x1 & 0x300)>>8; /* X-start (2 high bits) */
|
|
regs[0x06] = (y1 & 0x0ff); /* Y-start (8 low bits) */
|
|
regs[0x07] = (y1 & 0x300)>>8; /* Y-start (2 high bits) */
|
|
regs[0x08] = (x2 & 0x0ff); /* X-end (8 low bits) */
|
|
regs[0x09] = (x2 & 0x300)>>8; /* X-end (2 high bits) */
|
|
regs[0x0a] = (y2 & 0x0ff); /* Y-end (8 low bits) */
|
|
|
|
regs[0x0c] = W9966_SRAMID; /* SRAM-banks (1x 128kb) */
|
|
|
|
/* Enhancement layer */
|
|
regs[0x0d] = (enh_s & 0x000ff); /* Enh. start (0-7) */
|
|
regs[0x0e] = (enh_s & 0x0ff00) >> 8; /* Enh. start (8-15) */
|
|
regs[0x0f] = (enh_s & 0x70000) >> 16; /* Enh. start (16-17/18??) */
|
|
regs[0x10] = (enh_e & 0x000ff); /* Enh. end (0-7) */
|
|
regs[0x11] = (enh_e & 0x0ff00) >> 8; /* Enh. end (8-15) */
|
|
regs[0x12] = (enh_e & 0x70000) >> 16; /* Enh. end (16-17/18??) */
|
|
|
|
/* Misc */
|
|
regs[0x13] = 0x40; /* VEE control (raw 4:2:2) */
|
|
regs[0x17] = 0x00; /* ??? */
|
|
regs[0x18] = cam->i2c_state = 0x00; /* Serial bus */
|
|
regs[0x19] = 0xff; /* I/O port direction control */
|
|
regs[0x1a] = 0xff; /* I/O port data register */
|
|
regs[0x1b] = 0x10; /* ??? */
|
|
|
|
/* SAA7111 chip settings */
|
|
saa7111_regs[0x0a] = cam->brightness;
|
|
saa7111_regs[0x0b] = cam->contrast;
|
|
saa7111_regs[0x0c] = cam->color;
|
|
saa7111_regs[0x0d] = cam->hue;
|
|
|
|
/* Reset (ECP-fifo & serial-bus) */
|
|
if (w9966_write_reg(cam, 0x00, 0x03) == -1)
|
|
return -1;
|
|
|
|
/* Write regs to w9966cf chip */
|
|
for (i = 0; i < 0x1c; i++)
|
|
if (w9966_write_reg(cam, i, regs[i]) == -1)
|
|
return -1;
|
|
|
|
/* Write regs to saa7111 chip */
|
|
for (i = 0; i < 0x20; i++)
|
|
if (w9966_write_reg_i2c(cam, i, saa7111_regs[i]) == -1)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Video4linux interfacing
|
|
*/
|
|
|
|
static int cam_querycap(struct file *file, void *priv,
|
|
struct v4l2_capability *vcap)
|
|
{
|
|
struct w9966 *cam = video_drvdata(file);
|
|
|
|
strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver));
|
|
strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card));
|
|
strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
|
|
vcap->version = KERNEL_VERSION(0, 33, 0);
|
|
vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
|
|
return 0;
|
|
}
|
|
|
|
static int cam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
|
|
{
|
|
if (vin->index > 0)
|
|
return -EINVAL;
|
|
strlcpy(vin->name, "Camera", sizeof(vin->name));
|
|
vin->type = V4L2_INPUT_TYPE_CAMERA;
|
|
vin->audioset = 0;
|
|
vin->tuner = 0;
|
|
vin->std = 0;
|
|
vin->status = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int cam_g_input(struct file *file, void *fh, unsigned int *inp)
|
|
{
|
|
*inp = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int cam_s_input(struct file *file, void *fh, unsigned int inp)
|
|
{
|
|
return (inp > 0) ? -EINVAL : 0;
|
|
}
|
|
|
|
static int cam_queryctrl(struct file *file, void *priv,
|
|
struct v4l2_queryctrl *qc)
|
|
{
|
|
switch (qc->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
|
|
case V4L2_CID_CONTRAST:
|
|
return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64);
|
|
case V4L2_CID_SATURATION:
|
|
return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64);
|
|
case V4L2_CID_HUE:
|
|
return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int cam_g_ctrl(struct file *file, void *priv,
|
|
struct v4l2_control *ctrl)
|
|
{
|
|
struct w9966 *cam = video_drvdata(file);
|
|
int ret = 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
ctrl->value = cam->brightness;
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
ctrl->value = cam->contrast;
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
ctrl->value = cam->color;
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
ctrl->value = cam->hue;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int cam_s_ctrl(struct file *file, void *priv,
|
|
struct v4l2_control *ctrl)
|
|
{
|
|
struct w9966 *cam = video_drvdata(file);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&cam->lock);
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
cam->brightness = ctrl->value;
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
cam->contrast = ctrl->value;
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
cam->color = ctrl->value;
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
cam->hue = ctrl->value;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (ret == 0) {
|
|
w9966_pdev_claim(cam);
|
|
|
|
if (w9966_write_reg_i2c(cam, 0x0a, cam->brightness) == -1 ||
|
|
w9966_write_reg_i2c(cam, 0x0b, cam->contrast) == -1 ||
|
|
w9966_write_reg_i2c(cam, 0x0c, cam->color) == -1 ||
|
|
w9966_write_reg_i2c(cam, 0x0d, cam->hue) == -1) {
|
|
ret = -EIO;
|
|
}
|
|
|
|
w9966_pdev_release(cam);
|
|
}
|
|
mutex_unlock(&cam->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int cam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
|
|
{
|
|
struct w9966 *cam = video_drvdata(file);
|
|
struct v4l2_pix_format *pix = &fmt->fmt.pix;
|
|
|
|
pix->width = cam->width;
|
|
pix->height = cam->height;
|
|
pix->pixelformat = V4L2_PIX_FMT_YUYV;
|
|
pix->field = V4L2_FIELD_NONE;
|
|
pix->bytesperline = 2 * cam->width;
|
|
pix->sizeimage = 2 * cam->width * cam->height;
|
|
/* Just a guess */
|
|
pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
return 0;
|
|
}
|
|
|
|
static int cam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
|
|
{
|
|
struct v4l2_pix_format *pix = &fmt->fmt.pix;
|
|
|
|
if (pix->width < 2)
|
|
pix->width = 2;
|
|
if (pix->height < 1)
|
|
pix->height = 1;
|
|
if (pix->width > W9966_WND_MAX_W)
|
|
pix->width = W9966_WND_MAX_W;
|
|
if (pix->height > W9966_WND_MAX_H)
|
|
pix->height = W9966_WND_MAX_H;
|
|
pix->pixelformat = V4L2_PIX_FMT_YUYV;
|
|
pix->field = V4L2_FIELD_NONE;
|
|
pix->bytesperline = 2 * pix->width;
|
|
pix->sizeimage = 2 * pix->width * pix->height;
|
|
/* Just a guess */
|
|
pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
return 0;
|
|
}
|
|
|
|
static int cam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
|
|
{
|
|
struct w9966 *cam = video_drvdata(file);
|
|
struct v4l2_pix_format *pix = &fmt->fmt.pix;
|
|
int ret = cam_try_fmt_vid_cap(file, fh, fmt);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&cam->lock);
|
|
/* Update camera regs */
|
|
w9966_pdev_claim(cam);
|
|
ret = w9966_setup(cam, 0, 0, 1023, 1023, pix->width, pix->height);
|
|
w9966_pdev_release(cam);
|
|
mutex_unlock(&cam->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int cam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
|
|
{
|
|
static struct v4l2_fmtdesc formats[] = {
|
|
{ 0, 0, 0,
|
|
"YUV 4:2:2", V4L2_PIX_FMT_YUYV,
|
|
{ 0, 0, 0, 0 }
|
|
},
|
|
};
|
|
enum v4l2_buf_type type = fmt->type;
|
|
|
|
if (fmt->index > 0)
|
|
return -EINVAL;
|
|
|
|
*fmt = formats[fmt->index];
|
|
fmt->type = type;
|
|
return 0;
|
|
}
|
|
|
|
/* Capture data */
|
|
static ssize_t w9966_v4l_read(struct file *file, char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct w9966 *cam = video_drvdata(file);
|
|
unsigned char addr = 0xa0; /* ECP, read, CCD-transfer, 00000 */
|
|
unsigned char __user *dest = (unsigned char __user *)buf;
|
|
unsigned long dleft = count;
|
|
unsigned char *tbuf;
|
|
|
|
/* Why would anyone want more than this?? */
|
|
if (count > cam->width * cam->height * 2)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&cam->lock);
|
|
w9966_pdev_claim(cam);
|
|
w9966_write_reg(cam, 0x00, 0x02); /* Reset ECP-FIFO buffer */
|
|
w9966_write_reg(cam, 0x00, 0x00); /* Return to normal operation */
|
|
w9966_write_reg(cam, 0x01, 0x98); /* Enable capture */
|
|
|
|
/* write special capture-addr and negotiate into data transfer */
|
|
if ((parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0) ||
|
|
(parport_write(cam->pport, &addr, 1) != 1) ||
|
|
(parport_negotiate(cam->pport, cam->ppmode|IEEE1284_DATA) != 0)) {
|
|
w9966_pdev_release(cam);
|
|
mutex_unlock(&cam->lock);
|
|
return -EFAULT;
|
|
}
|
|
|
|
tbuf = kmalloc(W9966_RBUFFER, GFP_KERNEL);
|
|
if (tbuf == NULL) {
|
|
count = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
while (dleft > 0) {
|
|
unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft;
|
|
|
|
if (parport_read(cam->pport, tbuf, tsize) < tsize) {
|
|
count = -EFAULT;
|
|
goto out;
|
|
}
|
|
if (copy_to_user(dest, tbuf, tsize) != 0) {
|
|
count = -EFAULT;
|
|
goto out;
|
|
}
|
|
dest += tsize;
|
|
dleft -= tsize;
|
|
}
|
|
|
|
w9966_write_reg(cam, 0x01, 0x18); /* Disable capture */
|
|
|
|
out:
|
|
kfree(tbuf);
|
|
w9966_pdev_release(cam);
|
|
mutex_unlock(&cam->lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct v4l2_file_operations w9966_fops = {
|
|
.owner = THIS_MODULE,
|
|
.ioctl = video_ioctl2,
|
|
.read = w9966_v4l_read,
|
|
};
|
|
|
|
static const struct v4l2_ioctl_ops w9966_ioctl_ops = {
|
|
.vidioc_querycap = cam_querycap,
|
|
.vidioc_g_input = cam_g_input,
|
|
.vidioc_s_input = cam_s_input,
|
|
.vidioc_enum_input = cam_enum_input,
|
|
.vidioc_queryctrl = cam_queryctrl,
|
|
.vidioc_g_ctrl = cam_g_ctrl,
|
|
.vidioc_s_ctrl = cam_s_ctrl,
|
|
.vidioc_enum_fmt_vid_cap = cam_enum_fmt_vid_cap,
|
|
.vidioc_g_fmt_vid_cap = cam_g_fmt_vid_cap,
|
|
.vidioc_s_fmt_vid_cap = cam_s_fmt_vid_cap,
|
|
.vidioc_try_fmt_vid_cap = cam_try_fmt_vid_cap,
|
|
};
|
|
|
|
|
|
/* Initialize camera device. Setup all internal flags, set a
|
|
default video mode, setup ccd-chip, register v4l device etc..
|
|
Also used for 'probing' of hardware.
|
|
-1 on error */
|
|
static int w9966_init(struct w9966 *cam, struct parport *port)
|
|
{
|
|
struct v4l2_device *v4l2_dev = &cam->v4l2_dev;
|
|
|
|
if (cam->dev_state != 0)
|
|
return -1;
|
|
|
|
strlcpy(v4l2_dev->name, "w9966", sizeof(v4l2_dev->name));
|
|
|
|
if (v4l2_device_register(NULL, v4l2_dev) < 0) {
|
|
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
|
|
return -1;
|
|
}
|
|
cam->pport = port;
|
|
cam->brightness = 128;
|
|
cam->contrast = 64;
|
|
cam->color = 64;
|
|
cam->hue = 0;
|
|
|
|
/* Select requested transfer mode */
|
|
switch (parmode) {
|
|
default: /* Auto-detect (priority: hw-ecp, hw-epp, sw-ecp) */
|
|
case 0:
|
|
if (port->modes & PARPORT_MODE_ECP)
|
|
cam->ppmode = IEEE1284_MODE_ECP;
|
|
else if (port->modes & PARPORT_MODE_EPP)
|
|
cam->ppmode = IEEE1284_MODE_EPP;
|
|
else
|
|
cam->ppmode = IEEE1284_MODE_ECP;
|
|
break;
|
|
case 1: /* hw- or sw-ecp */
|
|
cam->ppmode = IEEE1284_MODE_ECP;
|
|
break;
|
|
case 2: /* hw- or sw-epp */
|
|
cam->ppmode = IEEE1284_MODE_EPP;
|
|
break;
|
|
}
|
|
|
|
/* Tell the parport driver that we exists */
|
|
cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL);
|
|
if (cam->pdev == NULL) {
|
|
DPRINTF("parport_register_device() failed\n");
|
|
return -1;
|
|
}
|
|
w9966_set_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV);
|
|
|
|
w9966_pdev_claim(cam);
|
|
|
|
/* Setup a default capture mode */
|
|
if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) {
|
|
DPRINTF("w9966_setup() failed.\n");
|
|
return -1;
|
|
}
|
|
|
|
w9966_pdev_release(cam);
|
|
|
|
/* Fill in the video_device struct and register us to v4l */
|
|
strlcpy(cam->vdev.name, W9966_DRIVERNAME, sizeof(cam->vdev.name));
|
|
cam->vdev.v4l2_dev = v4l2_dev;
|
|
cam->vdev.fops = &w9966_fops;
|
|
cam->vdev.ioctl_ops = &w9966_ioctl_ops;
|
|
cam->vdev.release = video_device_release_empty;
|
|
video_set_drvdata(&cam->vdev, cam);
|
|
|
|
mutex_init(&cam->lock);
|
|
|
|
if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
|
|
return -1;
|
|
|
|
w9966_set_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
|
|
|
|
/* All ok */
|
|
v4l2_info(v4l2_dev, "Found and initialized a webcam on %s.\n",
|
|
cam->pport->name);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Terminate everything gracefully */
|
|
static void w9966_term(struct w9966 *cam)
|
|
{
|
|
/* Unregister from v4l */
|
|
if (w9966_get_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV)) {
|
|
video_unregister_device(&cam->vdev);
|
|
w9966_set_state(cam, W9966_STATE_VDEV, 0);
|
|
}
|
|
|
|
/* Terminate from IEEE1284 mode and release pdev block */
|
|
if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) {
|
|
w9966_pdev_claim(cam);
|
|
parport_negotiate(cam->pport, IEEE1284_MODE_COMPAT);
|
|
w9966_pdev_release(cam);
|
|
}
|
|
|
|
/* Unregister from parport */
|
|
if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) {
|
|
parport_unregister_device(cam->pdev);
|
|
w9966_set_state(cam, W9966_STATE_PDEV, 0);
|
|
}
|
|
}
|
|
|
|
|
|
/* Called once for every parport on init */
|
|
static void w9966_attach(struct parport *port)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < W9966_MAXCAMS; i++) {
|
|
if (w9966_cams[i].dev_state != 0) /* Cam is already assigned */
|
|
continue;
|
|
if (strcmp(pardev[i], "aggressive") == 0 || strcmp(pardev[i], port->name) == 0) {
|
|
if (w9966_init(&w9966_cams[i], port) != 0)
|
|
w9966_term(&w9966_cams[i]);
|
|
break; /* return */
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Called once for every parport on termination */
|
|
static void w9966_detach(struct parport *port)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < W9966_MAXCAMS; i++)
|
|
if (w9966_cams[i].dev_state != 0 && w9966_cams[i].pport == port)
|
|
w9966_term(&w9966_cams[i]);
|
|
}
|
|
|
|
|
|
static struct parport_driver w9966_ppd = {
|
|
.name = W9966_DRIVERNAME,
|
|
.attach = w9966_attach,
|
|
.detach = w9966_detach,
|
|
};
|
|
|
|
/* Module entry point */
|
|
static int __init w9966_mod_init(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < W9966_MAXCAMS; i++)
|
|
w9966_cams[i].dev_state = 0;
|
|
|
|
return parport_register_driver(&w9966_ppd);
|
|
}
|
|
|
|
/* Module cleanup */
|
|
static void __exit w9966_mod_term(void)
|
|
{
|
|
parport_unregister_driver(&w9966_ppd);
|
|
}
|
|
|
|
module_init(w9966_mod_init);
|
|
module_exit(w9966_mod_term);
|