lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ba46df984b
android_kernel_xiaomi_sm8350/include/asm-arm/arch-sa1100/h3600_gpio.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

541 lines
34 KiB
C
Raw Blame History

/*
*
* Definitions for H3600 Handheld Computer
*
* Copyright 2000 Compaq Computer Corporation.
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
*
* Author: Jamey Hicks.
*
* History:
*
* 2001-10-?? Andrew Christian Added support for iPAQ H3800
*
*/
#ifndef _INCLUDE_H3600_GPIO_H_
#define _INCLUDE_H3600_GPIO_H_
/*
* GPIO lines that are common across ALL iPAQ models are in "h3600.h"
* This file contains machine-specific definitions
*/
#define GPIO_H3600_SUSPEND GPIO_GPIO (0)
/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
#define GPIO_H3100_BT_ON GPIO_GPIO (2)
#define GPIO_H3100_GPIO3 GPIO_GPIO (3)
#define GPIO_H3100_QMUTE GPIO_GPIO (4)
#define GPIO_H3100_LCD_3V_ON GPIO_GPIO (5)
#define GPIO_H3100_AUD_ON GPIO_GPIO (6)
#define GPIO_H3100_AUD_PWR_ON GPIO_GPIO (7)
#define GPIO_H3100_IR_ON GPIO_GPIO (8)
#define GPIO_H3100_IR_FSEL GPIO_GPIO (9)
/* for H3600, audio sample rate clock generator */
#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12)
#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13)
#define GPIO_H3600_ACTION_BUTTON GPIO_GPIO (18)
#define GPIO_H3600_SOFT_RESET GPIO_GPIO (20) /* Also known as BATT_FAULT */
#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
/* H3800 specific pins */
#define GPIO_H3800_AC_IN GPIO_GPIO (12)
#define GPIO_H3800_COM_DSR GPIO_GPIO (13)
#define GPIO_H3800_MMC_INT GPIO_GPIO (18)
#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */
#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22)
#define GPIO_H3800_CLK_OUT GPIO_GPIO (27)
/****************************************************/
#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18
#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */
/* H3100 / 3600 EGPIO pins */
#define EGPIO_H3600_VPP_ON (1 << 0)
#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */
#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */
#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */
#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */
#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */
#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */
/* H3600 only EGPIO pins */
#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */
#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */
#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */
#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */
#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */
#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */
#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
/********************* H3800, ASIC #2 ********************/
#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT)
#define H3800_ASIC2_OFFSET(s,x,y) \
(*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
#define H3800_ASIC2_NOFFSET(s,x,n,y) \
(*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
#define _H3800_ASIC2_GPIO_Base 0x0000
#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */
#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */
#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */
#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */
#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */
#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */
#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction )
#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data )
#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */
#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */
#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */
#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */
#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */
#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */
#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */
#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */
#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */
#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */
#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */
#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */
#define _H3800_ASIC2_KPIO_Base 0x0200
#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */
#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */
#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */
#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */
#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */
#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */
#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction )
#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data )
#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 )
#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 )
#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 )
#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 )
#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 )
#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 )
#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 )
#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 )
#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */
#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */
#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */
#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */
#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */
#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */
#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */
#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */
#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */
#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */
#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */
#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */
/* Alternate KPIO functions (set by default) */
#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */
#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */
#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */
#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */
#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */
#define _H3800_ASIC2_SPI_Base 0x0400
#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */
#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */
#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */
#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control )
#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data )
#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
#define _H3800_ASIC2_PWM_0_Base 0x0600
#define _H3800_ASIC2_PWM_1_Base 0x0700
#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */
#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */
#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */
#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase )
#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase )
#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */
#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */
#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */
#define _H3800_ASIC2_LED_0_Base 0x0800
#define _H3800_ASIC2_LED_1_Base 0x0880
#define _H3800_ASIC2_LED_2_Base 0x0900
#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */
#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */
#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */
#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */
#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase )
#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase )
#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase )
#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */
#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */
#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 )
#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */
#define _H3800_ASIC2_UART_0_Base 0x0A00
#define _H3800_ASIC2_UART_1_Base 0x0C00
#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */
#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */
#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */
#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */
#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */
#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */
#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */
#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */
#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */
#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */
#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */
#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive )
#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit )
#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable )
#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify )
#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl )
#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl )
#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus )
#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus )
#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad )
#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL )
#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH )
#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive )
#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit )
#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable )
#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify )
#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl )
#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl )
#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus )
#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus )
#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad )
#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL )
#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH )
#define _H3800_ASIC2_TIMER_Base 0x0E00
#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */
#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command )
#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */
#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */
#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */
#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */
#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */
#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */
#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */
#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */
#define _H3800_ASIC2_CLOCK_Base 0x1000
#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */
#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */
#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */
#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */
#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */
#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */
#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */
#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */
#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */
#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */
#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */
#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */
#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */
#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */
#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */
#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */
#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */
#define _H3800_ASIC2_ADC_Base 0x1200
#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */
#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */
#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */
#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer )
#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus )
#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data )
#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */
#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */
#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */
#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 )
#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 )
#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */
#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */
#define _H3800_ASIC2_INTR_Base 0x1600
#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */
#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */
#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */
#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */
#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */
#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */
#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 )
#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 )
#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 )
#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 )
#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */
#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */
#define _H3800_ASIC2_OWM_Base 0x1800
#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */
#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */
#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */
#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */
#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */
#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command )
#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data )
#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */
#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */
#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */
#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */
#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */
#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */
#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */
#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */
#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */
#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */
#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */
#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */
#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */
#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */
#define _H3800_ASIC2_FlashCtl_Base 0x1A00
/****************************************************/
/* H3800, ASIC #1
* This ASIC is accesed through ASIC #2, and
* mapped into the 1c00 - 1f00 region
*/
#define H3800_ASIC1_OFFSET(s,x,y) \
(*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
#define _H3800_ASIC1_MMC_Base 0x1c00
#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */
#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */
#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */
#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */
#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */
#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */
#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */
#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */
#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */
#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */
#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */
#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */
#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */
#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */
#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */
#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock )
#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status )
#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate )
#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister )
#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont )
#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout )
#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask )
#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber )
#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull )
#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */
#define H3800_ASIC1_MMC_START_CLOCK (1 << 1)
#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0)
#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1)
#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2)
#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3)
#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */
#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5)
#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6)
#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7)
#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */
#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */
#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */
#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */
#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */
#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */
#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */
#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02
#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03
#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */
#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */
#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */
#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */
#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */
#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0)
#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1)
#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2)
#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3)
#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0)
/********* GPIO **********/
#define _H3800_ASIC1_GPIO_Base 0x1e00
#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */
#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */
#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */
#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */
#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */
#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */
#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */
#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */
#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */
#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */
#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */
#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */
#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */
#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */
#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */
#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */
#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask )
#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction )
#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out )
#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State )
#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset )
#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status )
#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0)
#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1)
#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2)
#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3)
#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4)
#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5)
#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0)
#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1)
#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2)
/* These are all outputs */
#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */
#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */
#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */
#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */
#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */
#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */
#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */
#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */
#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */
#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */
#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */
#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */
#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */
#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */
#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */
/* Write enable for the flash */
#define _H3800_ASIC1_FlashWP_Base 0x1F00
#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */
#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
#endif /* _INCLUDE_H3600_GPIO_H_ */
Reference in New Issue View Git Blame Copy Permalink