3acb23440f
This patch adds support for Marvell EV64360BP board. So far, it supports mpsc serial console, gigabit ethernet, jffs2 root filesystem, etc. Other device support, like watchdog, RTC, will be added later. Signed-off-by: Lee Nicks <allinux@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
253 lines
9.4 KiB
Makefile
253 lines
9.4 KiB
Makefile
# This is far from simple, but I couldn't think of a good name. This is
|
|
# for making the 'zImage' or 'zImage.initrd' on a number of targets.
|
|
#
|
|
# Author: Tom Rini <trini@mvista.com>
|
|
#
|
|
# Notes:
|
|
# (1) For machines that do not want to use the ELF image directly (including
|
|
# stripping just the ELF header off), they must set the variables
|
|
# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target
|
|
# that produces the desired image and they must set end-$(CONFIG_MACHINE)
|
|
# to what will be suffixed to the image filename.
|
|
# (2) Regardless of (1), to have the resulting image be something other
|
|
# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for
|
|
# the zImage, znetboot, and znetbootrd targets.
|
|
# (3) For machine targets which use the mktree program, you can optionally
|
|
# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be
|
|
# loaded at. The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link
|
|
# address.
|
|
# (4) It is advisable to pass in the memory size using BI_MEMSIZE and
|
|
# get_mem_size(), which is memory controller dependent. Add in the correct
|
|
# XXX_memory.o file for this to work, as well as editing the
|
|
# misc-$(CONFIG_MACHINE) variable.
|
|
|
|
boot := arch/ppc/boot
|
|
common := $(boot)/common
|
|
utils := $(boot)/utils
|
|
bootlib := $(boot)/lib
|
|
images := $(boot)/images
|
|
of1275 := $(boot)/of1275
|
|
tftpboot := /tftpboot
|
|
|
|
# Normally, we use the 'misc.c' file for decompress_kernel and
|
|
# whatnot. Sometimes we need to override this however.
|
|
misc-y := misc.o
|
|
|
|
# Normally, we have our images end in .elf, but something we want to
|
|
# change this.
|
|
end-y := elf
|
|
|
|
# Additionally, we normally don't need to mess with the L2 / L3 caches
|
|
# if present on 'classic' PPC.
|
|
cacheflag-y := -DCLEAR_CACHES=""
|
|
# This file will flush / disable the L2, and L3 if present.
|
|
clear_L2_L3 := $(srctree)/$(boot)/simple/clear.S
|
|
|
|
#
|
|
# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
|
|
# for definition of what platform each config option refer to.
|
|
#----------------------------------------------------------------------------
|
|
zimage-$(CONFIG_CPCI690) := zImage-STRIPELF
|
|
zimageinitrd-$(CONFIG_CPCI690) := zImage.initrd-STRIPELF
|
|
extra.o-$(CONFIG_CPCI690) := misc-cpci690.o
|
|
end-$(CONFIG_CPCI690) := cpci690
|
|
cacheflag-$(CONFIG_CPCI690) := -include $(clear_L2_L3)
|
|
|
|
zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE
|
|
zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE
|
|
end-$(CONFIG_IBM_OPENBIOS) := treeboot
|
|
misc-$(CONFIG_IBM_OPENBIOS) := misc-embedded.o
|
|
|
|
end-$(CONFIG_EMBEDDEDBOOT) := embedded
|
|
misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o
|
|
|
|
zimage-$(CONFIG_BAMBOO) := zImage-TREE
|
|
zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE
|
|
end-$(CONFIG_BAMBOO) := bamboo
|
|
entrypoint-$(CONFIG_BAMBOO) := 0x01000000
|
|
extra.o-$(CONFIG_BAMBOO) := pibs.o
|
|
|
|
zimage-$(CONFIG_EBONY) := zImage-TREE
|
|
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
|
|
end-$(CONFIG_EBONY) := ebony
|
|
entrypoint-$(CONFIG_EBONY) := 0x01000000
|
|
extra.o-$(CONFIG_EBONY) := openbios.o
|
|
|
|
zimage-$(CONFIG_LUAN) := zImage-TREE
|
|
zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE
|
|
end-$(CONFIG_LUAN) := luan
|
|
entrypoint-$(CONFIG_LUAN) := 0x01000000
|
|
extra.o-$(CONFIG_LUAN) := pibs.o
|
|
|
|
zimage-$(CONFIG_OCOTEA) := zImage-TREE
|
|
zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE
|
|
end-$(CONFIG_OCOTEA) := ocotea
|
|
entrypoint-$(CONFIG_OCOTEA) := 0x01000000
|
|
extra.o-$(CONFIG_OCOTEA) := pibs.o
|
|
|
|
extra.o-$(CONFIG_EV64260) := misc-ev64260.o
|
|
end-$(CONFIG_EV64260) := ev64260
|
|
cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3)
|
|
|
|
extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o
|
|
end-$(CONFIG_CHESTNUT) := chestnut
|
|
|
|
zimage-$(CONFIG_GEMINI) := zImage-STRIPELF
|
|
zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF
|
|
end-$(CONFIG_GEMINI) := gemini
|
|
|
|
extra.o-$(CONFIG_KATANA) := misc-katana.o
|
|
end-$(CONFIG_KATANA) := katana
|
|
cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3)
|
|
|
|
extra.o-$(CONFIG_RADSTONE_PPC7D) := misc-radstone_ppc7d.o
|
|
end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d
|
|
cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3)
|
|
|
|
extra.o-$(CONFIG_EV64360) := misc-ev64360.o
|
|
end-$(CONFIG_EV64360) := ev64360
|
|
cacheflag-$(CONFIG_EV64360) := -include $(clear_L2_L3)
|
|
|
|
# kconfig 'feature', only one of these will ever be 'y' at a time.
|
|
# The rest will be unset.
|
|
motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
|
|
$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
|
|
motorola := $(strip $(motorola))
|
|
|
|
zimage-$(motorola) := zImage-PPLUS
|
|
zimageinitrd-$(motorola) := zImage.initrd-PPLUS
|
|
end-$(motorola) := pplus
|
|
|
|
# Overrides previous assingment
|
|
extra.o-$(CONFIG_PPLUS) := prepmap.o
|
|
extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o
|
|
|
|
# Really only valid if CONFIG_6xx=y
|
|
zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS
|
|
zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS
|
|
ifeq ($(CONFIG_6xx),y)
|
|
extra.o-$(CONFIG_PPC_PREP) := prepmap.o
|
|
misc-$(CONFIG_PPC_PREP) += misc-prep.o mpc10x_memory.o
|
|
endif
|
|
end-$(CONFIG_PPC_PREP) := prep
|
|
|
|
end-$(CONFIG_SANDPOINT) := sandpoint
|
|
cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3)
|
|
|
|
zimage-$(CONFIG_SPRUCE) := zImage-TREE
|
|
zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE
|
|
end-$(CONFIG_SPRUCE) := spruce
|
|
entrypoint-$(CONFIG_SPRUCE) := 0x00800000
|
|
misc-$(CONFIG_SPRUCE) += misc-spruce.o
|
|
|
|
zimage-$(CONFIG_LITE5200) := zImage-STRIPELF
|
|
zimageinitrd-$(CONFIG_LITE5200) := zImage.initrd-STRIPELF
|
|
end-$(CONFIG_LITE5200) := lite5200
|
|
cacheflag-$(CONFIG_LITE5200) := -include $(clear_L2_L3)
|
|
|
|
|
|
# SMP images should have a '.smp' suffix.
|
|
end-$(CONFIG_SMP) := $(end-y).smp
|
|
|
|
# This is a treeboot that needs init functions until the
|
|
# boot rom is sorted out (i.e. this is short lived)
|
|
EXTRA_AFLAGS := $(extra-aflags-y)
|
|
# head.o needs to get the cacheflags defined.
|
|
AFLAGS_head.o += $(cacheflag-y)
|
|
|
|
# Linker args. This specifies where the image will be run at.
|
|
LD_ARGS := -T $(srctree)/$(boot)/ld.script \
|
|
-Ttext $(CONFIG_BOOT_LOAD) -Bstatic
|
|
OBJCOPY_ARGS := -O elf32-powerpc
|
|
|
|
# head.o and relocate.o must be at the start.
|
|
boot-y := head.o relocate.o $(extra.o-y) $(misc-y)
|
|
boot-$(CONFIG_40x) += embed_config.o
|
|
boot-$(CONFIG_8xx) += embed_config.o
|
|
boot-$(CONFIG_8260) += embed_config.o
|
|
boot-$(CONFIG_BSEIP) += iic.o
|
|
boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o
|
|
boot-$(CONFIG_MV64X60) += misc-mv64x60.o
|
|
boot-$(CONFIG_RPXCLASSIC) += iic.o pci.o qspan_pci.o
|
|
boot-$(CONFIG_RPXLITE) += iic.o
|
|
# Different boards need different serial implementations.
|
|
ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y)
|
|
boot-$(CONFIG_8xx) += m8xx_tty.o
|
|
boot-$(CONFIG_8260) += m8260_tty.o
|
|
endif
|
|
boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE) += mpc52xx_tty.o
|
|
boot-$(CONFIG_SERIAL_MPSC_CONSOLE) += mv64x60_tty.o
|
|
|
|
LIBS := $(common)/lib.a $(bootlib)/lib.a
|
|
ifeq ($(CONFIG_PPC_PREP),y)
|
|
LIBS += $(of1275)/lib.a
|
|
endif
|
|
|
|
OBJS := $(addprefix $(obj)/,$(boot-y))
|
|
|
|
# Tools
|
|
MKBUGBOOT := $(utils)/mkbugboot
|
|
MKPREP := $(utils)/mkprep
|
|
MKTREE := $(utils)/mktree
|
|
|
|
targets := dummy.o
|
|
|
|
$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
|
|
$(images)/vmlinux.gz $(obj)/dummy.o
|
|
$(OBJCOPY) $(OBJCOPY_ARGS) \
|
|
--add-section=.image=$(images)/vmlinux.gz \
|
|
--set-section-flags=.image=contents,alloc,load,readonly,data \
|
|
$(obj)/dummy.o $(obj)/image.o
|
|
$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
|
|
$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
|
|
-R .stabstr -R .ramdisk
|
|
|
|
$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
|
|
$(images)/vmlinux.gz $(obj)/dummy.o
|
|
$(OBJCOPY) $(OBJCOPY_ARGS) \
|
|
--add-section=.ramdisk=$(images)/ramdisk.image.gz \
|
|
--set-section-flags=.ramdisk=contents,alloc,load,readonly,data \
|
|
--add-section=.image=$(images)/vmlinux.gz \
|
|
--set-section-flags=.image=contents,alloc,load,readonly,data \
|
|
$(obj)/dummy.o $(obj)/image.o
|
|
$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
|
|
$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
|
|
-R .stabstr
|
|
|
|
# Sort-of dummy rules, that let us format the image we want.
|
|
zImage: $(images)/$(zimage-y) $(obj)/zvmlinux
|
|
cp -f $(obj)/zvmlinux $(images)/zImage.elf
|
|
rm -f $(obj)/zvmlinux
|
|
|
|
zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd
|
|
cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf
|
|
rm -f $(obj)/zvmlinux.initrd
|
|
|
|
znetboot: zImage
|
|
cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y)
|
|
|
|
znetboot.initrd: zImage.initrd
|
|
cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y)
|
|
|
|
$(images)/zImage-STRIPELF: $(obj)/zvmlinux
|
|
dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k
|
|
|
|
$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd
|
|
dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \
|
|
skip=64 bs=1k
|
|
|
|
$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
|
|
$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(ENTRYPOINT)
|
|
|
|
$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
|
|
$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
|
|
$(ENTRYPOINT)
|
|
|
|
$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
|
|
$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
|
|
$(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot
|
|
|
|
$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT)
|
|
$(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y)
|
|
$(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot
|