0c541b4406
My previous patch that added sleep support for uninorth-agp and some AGP "off" stuff in radeonfb and aty128fb is breaking some configs. More specifically, it has problems with rage128 setups since the DRI code for these in X doesn't properly re-enable AGP on wakeup or console switch (unlike the radeon DRM). This patch fixes the problem for pmac once for all by using a different approach. The AGP driver "registers" special suspend/resume callbacks with some arch code that the fbdev's can later on call to suspend and resume AGP, making sure it's resumed back in the same state it was when suspended. This is platform specific for now. It would be too complicated to try to do a generic implementation of this at this point due to all sort of weird things going on with AGP on other architectures. We'll re-work that whole problem cleanly once we finally merge fbdev's and DRI. In the meantime, please apply this patch which brings back some r128 based laptops into working condition as far as system sleep is concerned. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
684 lines
17 KiB
C
684 lines
17 KiB
C
/*
|
|
* UniNorth AGPGART routines.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/agp_backend.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/uninorth.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include "agp.h"
|
|
|
|
/*
|
|
* NOTES for uninorth3 (G5 AGP) supports :
|
|
*
|
|
* There maybe also possibility to have bigger cache line size for
|
|
* agp (see pmac_pci.c and look for cache line). Need to be investigated
|
|
* by someone.
|
|
*
|
|
* PAGE size are hardcoded but this may change, see asm/page.h.
|
|
*
|
|
* Jerome Glisse <j.glisse@gmail.com>
|
|
*/
|
|
static int uninorth_rev;
|
|
static int is_u3;
|
|
|
|
|
|
static int uninorth_fetch_size(void)
|
|
{
|
|
int i;
|
|
u32 temp;
|
|
struct aper_size_info_32 *values;
|
|
|
|
pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_BASE, &temp);
|
|
temp &= ~(0xfffff000);
|
|
values = A_SIZE_32(agp_bridge->driver->aperture_sizes);
|
|
|
|
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
|
|
if (temp == values[i].size_value) {
|
|
agp_bridge->previous_size =
|
|
agp_bridge->current_size = (void *) (values + i);
|
|
agp_bridge->aperture_size_idx = i;
|
|
return values[i].size;
|
|
}
|
|
}
|
|
|
|
agp_bridge->previous_size =
|
|
agp_bridge->current_size = (void *) (values + 1);
|
|
agp_bridge->aperture_size_idx = 1;
|
|
return values[1].size;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uninorth_tlbflush(struct agp_memory *mem)
|
|
{
|
|
u32 ctrl = UNI_N_CFG_GART_ENABLE;
|
|
|
|
if (is_u3)
|
|
ctrl |= U3_N_CFG_GART_PERFRD;
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
|
|
ctrl | UNI_N_CFG_GART_INVAL);
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, ctrl);
|
|
|
|
if (uninorth_rev <= 0x30) {
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
|
|
ctrl | UNI_N_CFG_GART_2xRESET);
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
|
|
ctrl);
|
|
}
|
|
}
|
|
|
|
static void uninorth_cleanup(void)
|
|
{
|
|
u32 tmp;
|
|
|
|
pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, &tmp);
|
|
if (!(tmp & UNI_N_CFG_GART_ENABLE))
|
|
return;
|
|
tmp |= UNI_N_CFG_GART_INVAL;
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, tmp);
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, 0);
|
|
|
|
if (uninorth_rev <= 0x30) {
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
|
|
UNI_N_CFG_GART_2xRESET);
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
|
|
0);
|
|
}
|
|
}
|
|
|
|
static int uninorth_configure(void)
|
|
{
|
|
struct aper_size_info_32 *current_size;
|
|
|
|
current_size = A_SIZE_32(agp_bridge->current_size);
|
|
|
|
printk(KERN_INFO PFX "configuring for size idx: %d\n",
|
|
current_size->size_value);
|
|
|
|
/* aperture size and gatt addr */
|
|
pci_write_config_dword(agp_bridge->dev,
|
|
UNI_N_CFG_GART_BASE,
|
|
(agp_bridge->gatt_bus_addr & 0xfffff000)
|
|
| current_size->size_value);
|
|
|
|
/* HACK ALERT
|
|
* UniNorth seem to be buggy enough not to handle properly when
|
|
* the AGP aperture isn't mapped at bus physical address 0
|
|
*/
|
|
agp_bridge->gart_bus_addr = 0;
|
|
#ifdef CONFIG_PPC64
|
|
/* Assume U3 or later on PPC64 systems */
|
|
/* high 4 bits of GART physical address go in UNI_N_CFG_AGP_BASE */
|
|
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_AGP_BASE,
|
|
(agp_bridge->gatt_bus_addr >> 32) & 0xf);
|
|
#else
|
|
pci_write_config_dword(agp_bridge->dev,
|
|
UNI_N_CFG_AGP_BASE, agp_bridge->gart_bus_addr);
|
|
#endif
|
|
|
|
if (is_u3) {
|
|
pci_write_config_dword(agp_bridge->dev,
|
|
UNI_N_CFG_GART_DUMMY_PAGE,
|
|
agp_bridge->scratch_page_real >> 12);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start,
|
|
int type)
|
|
{
|
|
int i, j, num_entries;
|
|
void *temp;
|
|
|
|
temp = agp_bridge->current_size;
|
|
num_entries = A_SIZE_32(temp)->num_entries;
|
|
|
|
if (type != 0 || mem->type != 0)
|
|
/* We know nothing of memory types */
|
|
return -EINVAL;
|
|
if ((pg_start + mem->page_count) > num_entries)
|
|
return -EINVAL;
|
|
|
|
j = pg_start;
|
|
|
|
while (j < (pg_start + mem->page_count)) {
|
|
if (agp_bridge->gatt_table[j])
|
|
return -EBUSY;
|
|
j++;
|
|
}
|
|
|
|
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
|
|
agp_bridge->gatt_table[j] =
|
|
cpu_to_le32((mem->memory[i] & 0xFFFFF000UL) | 0x1UL);
|
|
flush_dcache_range((unsigned long)__va(mem->memory[i]),
|
|
(unsigned long)__va(mem->memory[i])+0x1000);
|
|
}
|
|
(void)in_le32((volatile u32*)&agp_bridge->gatt_table[pg_start]);
|
|
mb();
|
|
flush_dcache_range((unsigned long)&agp_bridge->gatt_table[pg_start],
|
|
(unsigned long)&agp_bridge->gatt_table[pg_start + mem->page_count]);
|
|
|
|
uninorth_tlbflush(mem);
|
|
return 0;
|
|
}
|
|
|
|
static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
|
|
{
|
|
int i, num_entries;
|
|
void *temp;
|
|
u32 *gp;
|
|
|
|
temp = agp_bridge->current_size;
|
|
num_entries = A_SIZE_32(temp)->num_entries;
|
|
|
|
if (type != 0 || mem->type != 0)
|
|
/* We know nothing of memory types */
|
|
return -EINVAL;
|
|
if ((pg_start + mem->page_count) > num_entries)
|
|
return -EINVAL;
|
|
|
|
gp = (u32 *) &agp_bridge->gatt_table[pg_start];
|
|
for (i = 0; i < mem->page_count; ++i) {
|
|
if (gp[i]) {
|
|
printk("u3_insert_memory: entry 0x%x occupied (%x)\n",
|
|
i, gp[i]);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < mem->page_count; i++) {
|
|
gp[i] = (mem->memory[i] >> PAGE_SHIFT) | 0x80000000UL;
|
|
flush_dcache_range((unsigned long)__va(mem->memory[i]),
|
|
(unsigned long)__va(mem->memory[i])+0x1000);
|
|
}
|
|
mb();
|
|
flush_dcache_range((unsigned long)gp, (unsigned long) &gp[i]);
|
|
uninorth_tlbflush(mem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int u3_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
|
|
{
|
|
size_t i;
|
|
u32 *gp;
|
|
|
|
if (type != 0 || mem->type != 0)
|
|
/* We know nothing of memory types */
|
|
return -EINVAL;
|
|
|
|
gp = (u32 *) &agp_bridge->gatt_table[pg_start];
|
|
for (i = 0; i < mem->page_count; ++i)
|
|
gp[i] = 0;
|
|
mb();
|
|
flush_dcache_range((unsigned long)gp, (unsigned long) &gp[i]);
|
|
uninorth_tlbflush(mem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
|
|
{
|
|
u32 command, scratch, status;
|
|
int timeout;
|
|
|
|
pci_read_config_dword(bridge->dev,
|
|
bridge->capndx + PCI_AGP_STATUS,
|
|
&status);
|
|
|
|
command = agp_collect_device_status(bridge, mode, status);
|
|
command |= PCI_AGP_COMMAND_AGP;
|
|
|
|
if (uninorth_rev == 0x21) {
|
|
/*
|
|
* Darwin disable AGP 4x on this revision, thus we
|
|
* may assume it's broken. This is an AGP2 controller.
|
|
*/
|
|
command &= ~AGPSTAT2_4X;
|
|
}
|
|
|
|
if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) {
|
|
/*
|
|
* We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
|
|
* 2.2 and 2.3, Darwin do so.
|
|
*/
|
|
if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7)
|
|
command = (command & ~AGPSTAT_RQ_DEPTH)
|
|
| (7 << AGPSTAT_RQ_DEPTH_SHIFT);
|
|
}
|
|
|
|
uninorth_tlbflush(NULL);
|
|
|
|
timeout = 0;
|
|
do {
|
|
pci_write_config_dword(bridge->dev,
|
|
bridge->capndx + PCI_AGP_COMMAND,
|
|
command);
|
|
pci_read_config_dword(bridge->dev,
|
|
bridge->capndx + PCI_AGP_COMMAND,
|
|
&scratch);
|
|
} while ((scratch & PCI_AGP_COMMAND_AGP) == 0 && ++timeout < 1000);
|
|
if ((scratch & PCI_AGP_COMMAND_AGP) == 0)
|
|
printk(KERN_ERR PFX "failed to write UniNorth AGP"
|
|
" command register\n");
|
|
|
|
if (uninorth_rev >= 0x30) {
|
|
/* This is an AGP V3 */
|
|
agp_device_command(command, (status & AGPSTAT_MODE_3_0));
|
|
} else {
|
|
/* AGP V2 */
|
|
agp_device_command(command, 0);
|
|
}
|
|
|
|
uninorth_tlbflush(NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/*
|
|
* These Power Management routines are _not_ called by the normal PCI PM layer,
|
|
* but directly by the video driver through function pointers in the device
|
|
* tree.
|
|
*/
|
|
static int agp_uninorth_suspend(struct pci_dev *pdev)
|
|
{
|
|
struct agp_bridge_data *bridge;
|
|
u32 cmd;
|
|
u8 agp;
|
|
struct pci_dev *device = NULL;
|
|
|
|
bridge = agp_find_bridge(pdev);
|
|
if (bridge == NULL)
|
|
return -ENODEV;
|
|
|
|
/* Only one suspend supported */
|
|
if (bridge->dev_private_data)
|
|
return 0;
|
|
|
|
/* turn off AGP on the video chip, if it was enabled */
|
|
for_each_pci_dev(device) {
|
|
/* Don't touch the bridge yet, device first */
|
|
if (device == pdev)
|
|
continue;
|
|
/* Only deal with devices on the same bus here, no Mac has a P2P
|
|
* bridge on the AGP port, and mucking around the entire PCI
|
|
* tree is source of problems on some machines because of a bug
|
|
* in some versions of pci_find_capability() when hitting a dead
|
|
* device
|
|
*/
|
|
if (device->bus != pdev->bus)
|
|
continue;
|
|
agp = pci_find_capability(device, PCI_CAP_ID_AGP);
|
|
if (!agp)
|
|
continue;
|
|
pci_read_config_dword(device, agp + PCI_AGP_COMMAND, &cmd);
|
|
if (!(cmd & PCI_AGP_COMMAND_AGP))
|
|
continue;
|
|
printk("uninorth-agp: disabling AGP on device %s\n",
|
|
pci_name(device));
|
|
cmd &= ~PCI_AGP_COMMAND_AGP;
|
|
pci_write_config_dword(device, agp + PCI_AGP_COMMAND, cmd);
|
|
}
|
|
|
|
/* turn off AGP on the bridge */
|
|
agp = pci_find_capability(pdev, PCI_CAP_ID_AGP);
|
|
pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
|
|
bridge->dev_private_data = (void *)cmd;
|
|
if (cmd & PCI_AGP_COMMAND_AGP) {
|
|
printk("uninorth-agp: disabling AGP on bridge %s\n",
|
|
pci_name(pdev));
|
|
cmd &= ~PCI_AGP_COMMAND_AGP;
|
|
pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND, cmd);
|
|
}
|
|
/* turn off the GART */
|
|
uninorth_cleanup();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int agp_uninorth_resume(struct pci_dev *pdev)
|
|
{
|
|
struct agp_bridge_data *bridge;
|
|
u32 command;
|
|
|
|
bridge = agp_find_bridge(pdev);
|
|
if (bridge == NULL)
|
|
return -ENODEV;
|
|
|
|
command = (u32)bridge->dev_private_data;
|
|
bridge->dev_private_data = NULL;
|
|
if (!(command & PCI_AGP_COMMAND_AGP))
|
|
return 0;
|
|
|
|
uninorth_agp_enable(bridge, command);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
|
|
{
|
|
char *table;
|
|
char *table_end;
|
|
int size;
|
|
int page_order;
|
|
int num_entries;
|
|
int i;
|
|
void *temp;
|
|
struct page *page;
|
|
|
|
/* We can't handle 2 level gatt's */
|
|
if (bridge->driver->size_type == LVL2_APER_SIZE)
|
|
return -EINVAL;
|
|
|
|
table = NULL;
|
|
i = bridge->aperture_size_idx;
|
|
temp = bridge->current_size;
|
|
size = page_order = num_entries = 0;
|
|
|
|
do {
|
|
size = A_SIZE_32(temp)->size;
|
|
page_order = A_SIZE_32(temp)->page_order;
|
|
num_entries = A_SIZE_32(temp)->num_entries;
|
|
|
|
table = (char *) __get_free_pages(GFP_KERNEL, page_order);
|
|
|
|
if (table == NULL) {
|
|
i++;
|
|
bridge->current_size = A_IDX32(bridge);
|
|
} else {
|
|
bridge->aperture_size_idx = i;
|
|
}
|
|
} while (!table && (i < bridge->driver->num_aperture_sizes));
|
|
|
|
if (table == NULL)
|
|
return -ENOMEM;
|
|
|
|
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
|
|
|
|
for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
|
|
SetPageReserved(page);
|
|
|
|
bridge->gatt_table_real = (u32 *) table;
|
|
bridge->gatt_table = (u32 *)table;
|
|
bridge->gatt_bus_addr = virt_to_phys(table);
|
|
|
|
for (i = 0; i < num_entries; i++)
|
|
bridge->gatt_table[i] = 0;
|
|
|
|
flush_dcache_range((unsigned long)table, (unsigned long)table_end);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uninorth_free_gatt_table(struct agp_bridge_data *bridge)
|
|
{
|
|
int page_order;
|
|
char *table, *table_end;
|
|
void *temp;
|
|
struct page *page;
|
|
|
|
temp = bridge->current_size;
|
|
page_order = A_SIZE_32(temp)->page_order;
|
|
|
|
/* Do not worry about freeing memory, because if this is
|
|
* called, then all agp memory is deallocated and removed
|
|
* from the table.
|
|
*/
|
|
|
|
table = (char *) bridge->gatt_table_real;
|
|
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
|
|
|
|
for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
|
|
ClearPageReserved(page);
|
|
|
|
free_pages((unsigned long) bridge->gatt_table_real, page_order);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void null_cache_flush(void)
|
|
{
|
|
mb();
|
|
}
|
|
|
|
/* Setup function */
|
|
|
|
static struct aper_size_info_32 uninorth_sizes[7] =
|
|
{
|
|
#if 0 /* Not sure uninorth supports that high aperture sizes */
|
|
{256, 65536, 6, 64},
|
|
{128, 32768, 5, 32},
|
|
{64, 16384, 4, 16},
|
|
#endif
|
|
{32, 8192, 3, 8},
|
|
{16, 4096, 2, 4},
|
|
{8, 2048, 1, 2},
|
|
{4, 1024, 0, 1}
|
|
};
|
|
|
|
/*
|
|
* Not sure that u3 supports that high aperture sizes but it
|
|
* would strange if it did not :)
|
|
*/
|
|
static struct aper_size_info_32 u3_sizes[8] =
|
|
{
|
|
{512, 131072, 7, 128},
|
|
{256, 65536, 6, 64},
|
|
{128, 32768, 5, 32},
|
|
{64, 16384, 4, 16},
|
|
{32, 8192, 3, 8},
|
|
{16, 4096, 2, 4},
|
|
{8, 2048, 1, 2},
|
|
{4, 1024, 0, 1}
|
|
};
|
|
|
|
struct agp_bridge_driver uninorth_agp_driver = {
|
|
.owner = THIS_MODULE,
|
|
.aperture_sizes = (void *)uninorth_sizes,
|
|
.size_type = U32_APER_SIZE,
|
|
.num_aperture_sizes = 4,
|
|
.configure = uninorth_configure,
|
|
.fetch_size = uninorth_fetch_size,
|
|
.cleanup = uninorth_cleanup,
|
|
.tlb_flush = uninorth_tlbflush,
|
|
.mask_memory = agp_generic_mask_memory,
|
|
.masks = NULL,
|
|
.cache_flush = null_cache_flush,
|
|
.agp_enable = uninorth_agp_enable,
|
|
.create_gatt_table = uninorth_create_gatt_table,
|
|
.free_gatt_table = uninorth_free_gatt_table,
|
|
.insert_memory = uninorth_insert_memory,
|
|
.remove_memory = agp_generic_remove_memory,
|
|
.alloc_by_type = agp_generic_alloc_by_type,
|
|
.free_by_type = agp_generic_free_by_type,
|
|
.agp_alloc_page = agp_generic_alloc_page,
|
|
.agp_destroy_page = agp_generic_destroy_page,
|
|
.cant_use_aperture = 1,
|
|
};
|
|
|
|
struct agp_bridge_driver u3_agp_driver = {
|
|
.owner = THIS_MODULE,
|
|
.aperture_sizes = (void *)u3_sizes,
|
|
.size_type = U32_APER_SIZE,
|
|
.num_aperture_sizes = 8,
|
|
.configure = uninorth_configure,
|
|
.fetch_size = uninorth_fetch_size,
|
|
.cleanup = uninorth_cleanup,
|
|
.tlb_flush = uninorth_tlbflush,
|
|
.mask_memory = agp_generic_mask_memory,
|
|
.masks = NULL,
|
|
.cache_flush = null_cache_flush,
|
|
.agp_enable = uninorth_agp_enable,
|
|
.create_gatt_table = uninorth_create_gatt_table,
|
|
.free_gatt_table = uninorth_free_gatt_table,
|
|
.insert_memory = u3_insert_memory,
|
|
.remove_memory = u3_remove_memory,
|
|
.alloc_by_type = agp_generic_alloc_by_type,
|
|
.free_by_type = agp_generic_free_by_type,
|
|
.agp_alloc_page = agp_generic_alloc_page,
|
|
.agp_destroy_page = agp_generic_destroy_page,
|
|
.cant_use_aperture = 1,
|
|
.needs_scratch_page = 1,
|
|
};
|
|
|
|
static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = {
|
|
{
|
|
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP,
|
|
.chipset_name = "UniNorth",
|
|
},
|
|
{
|
|
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP_P,
|
|
.chipset_name = "UniNorth/Pangea",
|
|
},
|
|
{
|
|
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP15,
|
|
.chipset_name = "UniNorth 1.5",
|
|
},
|
|
{
|
|
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP2,
|
|
.chipset_name = "UniNorth 2",
|
|
},
|
|
{
|
|
.device_id = PCI_DEVICE_ID_APPLE_U3_AGP,
|
|
.chipset_name = "U3",
|
|
},
|
|
{
|
|
.device_id = PCI_DEVICE_ID_APPLE_U3L_AGP,
|
|
.chipset_name = "U3L",
|
|
},
|
|
{
|
|
.device_id = PCI_DEVICE_ID_APPLE_U3H_AGP,
|
|
.chipset_name = "U3H",
|
|
},
|
|
};
|
|
|
|
static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct agp_device_ids *devs = uninorth_agp_device_ids;
|
|
struct agp_bridge_data *bridge;
|
|
struct device_node *uninorth_node;
|
|
u8 cap_ptr;
|
|
int j;
|
|
|
|
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
|
|
if (cap_ptr == 0)
|
|
return -ENODEV;
|
|
|
|
/* probe for known chipsets */
|
|
for (j = 0; devs[j].chipset_name != NULL; ++j) {
|
|
if (pdev->device == devs[j].device_id) {
|
|
printk(KERN_INFO PFX "Detected Apple %s chipset\n",
|
|
devs[j].chipset_name);
|
|
goto found;
|
|
}
|
|
}
|
|
|
|
printk(KERN_ERR PFX "Unsupported Apple chipset (device id: %04x).\n",
|
|
pdev->device);
|
|
return -ENODEV;
|
|
|
|
found:
|
|
/* Set revision to 0 if we could not read it. */
|
|
uninorth_rev = 0;
|
|
is_u3 = 0;
|
|
/* Locate core99 Uni-N */
|
|
uninorth_node = of_find_node_by_name(NULL, "uni-n");
|
|
/* Locate G5 u3 */
|
|
if (uninorth_node == NULL) {
|
|
is_u3 = 1;
|
|
uninorth_node = of_find_node_by_name(NULL, "u3");
|
|
}
|
|
if (uninorth_node) {
|
|
int *revprop = (int *)
|
|
get_property(uninorth_node, "device-rev", NULL);
|
|
if (revprop != NULL)
|
|
uninorth_rev = *revprop & 0x3f;
|
|
of_node_put(uninorth_node);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/* Inform platform of our suspend/resume caps */
|
|
pmac_register_agp_pm(pdev, agp_uninorth_suspend, agp_uninorth_resume);
|
|
#endif
|
|
|
|
/* Allocate & setup our driver */
|
|
bridge = agp_alloc_bridge();
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
if (is_u3)
|
|
bridge->driver = &u3_agp_driver;
|
|
else
|
|
bridge->driver = &uninorth_agp_driver;
|
|
|
|
bridge->dev = pdev;
|
|
bridge->capndx = cap_ptr;
|
|
bridge->flags = AGP_ERRATA_FASTWRITES;
|
|
|
|
/* Fill in the mode register */
|
|
pci_read_config_dword(pdev, cap_ptr+PCI_AGP_STATUS, &bridge->mode);
|
|
|
|
pci_set_drvdata(pdev, bridge);
|
|
return agp_add_bridge(bridge);
|
|
}
|
|
|
|
static void __devexit agp_uninorth_remove(struct pci_dev *pdev)
|
|
{
|
|
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
|
|
|
|
#ifdef CONFIG_PM
|
|
/* Inform platform of our suspend/resume caps */
|
|
pmac_register_agp_pm(pdev, NULL, NULL);
|
|
#endif
|
|
|
|
agp_remove_bridge(bridge);
|
|
agp_put_bridge(bridge);
|
|
}
|
|
|
|
static struct pci_device_id agp_uninorth_pci_table[] = {
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_APPLE,
|
|
.device = PCI_ANY_ID,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, agp_uninorth_pci_table);
|
|
|
|
static struct pci_driver agp_uninorth_pci_driver = {
|
|
.name = "agpgart-uninorth",
|
|
.id_table = agp_uninorth_pci_table,
|
|
.probe = agp_uninorth_probe,
|
|
.remove = agp_uninorth_remove,
|
|
};
|
|
|
|
static int __init agp_uninorth_init(void)
|
|
{
|
|
if (agp_off)
|
|
return -EINVAL;
|
|
return pci_register_driver(&agp_uninorth_pci_driver);
|
|
}
|
|
|
|
static void __exit agp_uninorth_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&agp_uninorth_pci_driver);
|
|
}
|
|
|
|
module_init(agp_uninorth_init);
|
|
module_exit(agp_uninorth_cleanup);
|
|
|
|
MODULE_AUTHOR("Ben Herrenschmidt & Paul Mackerras");
|
|
MODULE_LICENSE("GPL");
|