a354ab8557
Replace the inline asm with bitops in the PS3 interrupt chip mask routines. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
769 lines
19 KiB
C
769 lines
19 KiB
C
/*
|
|
* PS3 interrupt routines.
|
|
*
|
|
* Copyright (C) 2006 Sony Computer Entertainment Inc.
|
|
* Copyright 2006 Sony Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/machdep.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/lv1call.h>
|
|
#include <asm/smp.h>
|
|
|
|
#include "platform.h"
|
|
|
|
#if defined(DEBUG)
|
|
#define DBG udbg_printf
|
|
#else
|
|
#define DBG pr_debug
|
|
#endif
|
|
|
|
/**
|
|
* struct ps3_bmp - a per cpu irq status and mask bitmap structure
|
|
* @status: 256 bit status bitmap indexed by plug
|
|
* @unused_1:
|
|
* @mask: 256 bit mask bitmap indexed by plug
|
|
* @unused_2:
|
|
* @lock:
|
|
* @ipi_debug_brk_mask:
|
|
*
|
|
* The HV mantains per SMT thread mappings of HV outlet to HV plug on
|
|
* behalf of the guest. These mappings are implemented as 256 bit guest
|
|
* supplied bitmaps indexed by plug number. The addresses of the bitmaps
|
|
* are registered with the HV through lv1_configure_irq_state_bitmap().
|
|
* The HV requires that the 512 bits of status + mask not cross a page
|
|
* boundary. PS3_BMP_MINALIGN is used to define this minimal 64 byte
|
|
* alignment.
|
|
*
|
|
* The HV supports 256 plugs per thread, assigned as {0..255}, for a total
|
|
* of 512 plugs supported on a processor. To simplify the logic this
|
|
* implementation equates HV plug value to Linux virq value, constrains each
|
|
* interrupt to have a system wide unique plug number, and limits the range
|
|
* of the plug values to map into the first dword of the bitmaps. This
|
|
* gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note
|
|
* that there is no constraint on how many in this set an individual thread
|
|
* can acquire.
|
|
*/
|
|
|
|
#define PS3_BMP_MINALIGN 64
|
|
|
|
struct ps3_bmp {
|
|
struct {
|
|
u64 status;
|
|
u64 unused_1[3];
|
|
u64 mask;
|
|
u64 unused_2[3];
|
|
};
|
|
u64 ipi_debug_brk_mask;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
/**
|
|
* struct ps3_private - a per cpu data structure
|
|
* @bmp: ps3_bmp structure
|
|
* @ppe_id: HV logical_ppe_id
|
|
* @thread_id: HV thread_id
|
|
*/
|
|
|
|
struct ps3_private {
|
|
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
|
|
u64 ppe_id;
|
|
u64 thread_id;
|
|
};
|
|
|
|
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
|
|
|
|
/**
|
|
* ps3_chip_mask - Set an interrupt mask bit in ps3_bmp.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Sets ps3_bmp.mask and calls lv1_did_update_interrupt_mask().
|
|
*/
|
|
|
|
static void ps3_chip_mask(unsigned int virq)
|
|
{
|
|
struct ps3_private *pd = get_irq_chip_data(virq);
|
|
unsigned long flags;
|
|
|
|
pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
|
|
pd->thread_id, virq);
|
|
|
|
local_irq_save(flags);
|
|
clear_bit(63 - virq, &pd->bmp.mask);
|
|
lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/**
|
|
* ps3_chip_unmask - Clear an interrupt mask bit in ps3_bmp.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Clears ps3_bmp.mask and calls lv1_did_update_interrupt_mask().
|
|
*/
|
|
|
|
static void ps3_chip_unmask(unsigned int virq)
|
|
{
|
|
struct ps3_private *pd = get_irq_chip_data(virq);
|
|
unsigned long flags;
|
|
|
|
pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
|
|
pd->thread_id, virq);
|
|
|
|
local_irq_save(flags);
|
|
set_bit(63 - virq, &pd->bmp.mask);
|
|
lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/**
|
|
* ps3_chip_eoi - HV end-of-interrupt.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Calls lv1_end_of_interrupt_ext().
|
|
*/
|
|
|
|
static void ps3_chip_eoi(unsigned int virq)
|
|
{
|
|
const struct ps3_private *pd = get_irq_chip_data(virq);
|
|
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, virq);
|
|
}
|
|
|
|
/**
|
|
* ps3_irq_chip - Represents the ps3_bmp as a Linux struct irq_chip.
|
|
*/
|
|
|
|
static struct irq_chip ps3_irq_chip = {
|
|
.typename = "ps3",
|
|
.mask = ps3_chip_mask,
|
|
.unmask = ps3_chip_unmask,
|
|
.eoi = ps3_chip_eoi,
|
|
};
|
|
|
|
/**
|
|
* ps3_virq_setup - virq related setup.
|
|
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
|
|
* serviced on.
|
|
* @outlet: The HV outlet from the various create outlet routines.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Calls irq_create_mapping() to get a virq and sets the chip data to
|
|
* ps3_private data.
|
|
*/
|
|
|
|
int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
|
|
unsigned int *virq)
|
|
{
|
|
int result;
|
|
struct ps3_private *pd;
|
|
|
|
/* This defines the default interrupt distribution policy. */
|
|
|
|
if (cpu == PS3_BINDING_CPU_ANY)
|
|
cpu = 0;
|
|
|
|
pd = &per_cpu(ps3_private, cpu);
|
|
|
|
*virq = irq_create_mapping(NULL, outlet);
|
|
|
|
if (*virq == NO_IRQ) {
|
|
pr_debug("%s:%d: irq_create_mapping failed: outlet %lu\n",
|
|
__func__, __LINE__, outlet);
|
|
result = -ENOMEM;
|
|
goto fail_create;
|
|
}
|
|
|
|
pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
|
|
outlet, cpu, *virq);
|
|
|
|
result = set_irq_chip_data(*virq, pd);
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: set_irq_chip_data failed\n",
|
|
__func__, __LINE__);
|
|
goto fail_set;
|
|
}
|
|
|
|
ps3_chip_mask(*virq);
|
|
|
|
return result;
|
|
|
|
fail_set:
|
|
irq_dispose_mapping(*virq);
|
|
fail_create:
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* ps3_virq_destroy - virq related teardown.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Clears chip data and calls irq_dispose_mapping() for the virq.
|
|
*/
|
|
|
|
int ps3_virq_destroy(unsigned int virq)
|
|
{
|
|
const struct ps3_private *pd = get_irq_chip_data(virq);
|
|
|
|
pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
|
|
__LINE__, pd->ppe_id, pd->thread_id, virq);
|
|
|
|
set_irq_chip_data(virq, NULL);
|
|
irq_dispose_mapping(virq);
|
|
|
|
pr_debug("%s:%d <-\n", __func__, __LINE__);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ps3_irq_plug_setup - Generic outlet and virq related setup.
|
|
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
|
|
* serviced on.
|
|
* @outlet: The HV outlet from the various create outlet routines.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Sets up virq and connects the irq plug.
|
|
*/
|
|
|
|
int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
|
|
unsigned int *virq)
|
|
{
|
|
int result;
|
|
struct ps3_private *pd;
|
|
|
|
result = ps3_virq_setup(cpu, outlet, virq);
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
|
|
goto fail_setup;
|
|
}
|
|
|
|
pd = get_irq_chip_data(*virq);
|
|
|
|
/* Binds outlet to cpu + virq. */
|
|
|
|
result = lv1_connect_irq_plug_ext(pd->ppe_id, pd->thread_id, *virq,
|
|
outlet, 0);
|
|
|
|
if (result) {
|
|
pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
result = -EPERM;
|
|
goto fail_connect;
|
|
}
|
|
|
|
return result;
|
|
|
|
fail_connect:
|
|
ps3_virq_destroy(*virq);
|
|
fail_setup:
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ps3_irq_plug_setup);
|
|
|
|
/**
|
|
* ps3_irq_plug_destroy - Generic outlet and virq related teardown.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Disconnects the irq plug and tears down virq.
|
|
* Do not call for system bus event interrupts setup with
|
|
* ps3_sb_event_receive_port_setup().
|
|
*/
|
|
|
|
int ps3_irq_plug_destroy(unsigned int virq)
|
|
{
|
|
int result;
|
|
const struct ps3_private *pd = get_irq_chip_data(virq);
|
|
|
|
pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
|
|
__LINE__, pd->ppe_id, pd->thread_id, virq);
|
|
|
|
ps3_chip_mask(virq);
|
|
|
|
result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq);
|
|
|
|
if (result)
|
|
pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
|
|
ps3_virq_destroy(virq);
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ps3_irq_plug_destroy);
|
|
|
|
/**
|
|
* ps3_event_receive_port_setup - Setup an event receive port.
|
|
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
|
|
* serviced on.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* The virq can be used with lv1_connect_interrupt_event_receive_port() to
|
|
* arrange to receive interrupts from system-bus devices, or with
|
|
* ps3_send_event_locally() to signal events.
|
|
*/
|
|
|
|
int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
|
|
{
|
|
int result;
|
|
unsigned long outlet;
|
|
|
|
result = lv1_construct_event_receive_port(&outlet);
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
*virq = NO_IRQ;
|
|
return result;
|
|
}
|
|
|
|
result = ps3_irq_plug_setup(cpu, outlet, virq);
|
|
BUG_ON(result);
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ps3_event_receive_port_setup);
|
|
|
|
/**
|
|
* ps3_event_receive_port_destroy - Destroy an event receive port.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* Since ps3_event_receive_port_destroy destroys the receive port outlet,
|
|
* SB devices need to call disconnect_interrupt_event_receive_port() before
|
|
* this.
|
|
*/
|
|
|
|
int ps3_event_receive_port_destroy(unsigned int virq)
|
|
{
|
|
int result;
|
|
|
|
pr_debug(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
|
|
|
|
ps3_chip_mask(virq);
|
|
|
|
result = lv1_destruct_event_receive_port(virq_to_hw(virq));
|
|
|
|
if (result)
|
|
pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
|
|
/*
|
|
* Don't call ps3_virq_destroy() here since ps3_smp_cleanup_cpu()
|
|
* calls from interrupt context (smp_call_function) when kexecing.
|
|
*/
|
|
|
|
pr_debug(" <- %s:%d\n", __func__, __LINE__);
|
|
return result;
|
|
}
|
|
|
|
int ps3_send_event_locally(unsigned int virq)
|
|
{
|
|
return lv1_send_event_locally(virq_to_hw(virq));
|
|
}
|
|
|
|
/**
|
|
* ps3_sb_event_receive_port_setup - Setup a system bus event receive port.
|
|
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
|
|
* serviced on.
|
|
* @dev: The system bus device instance.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* An event irq represents a virtual device interrupt. The interrupt_id
|
|
* coresponds to the software interrupt number.
|
|
*/
|
|
|
|
int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
|
|
enum ps3_cpu_binding cpu, unsigned int *virq)
|
|
{
|
|
/* this should go in system-bus.c */
|
|
|
|
int result;
|
|
|
|
result = ps3_event_receive_port_setup(cpu, virq);
|
|
|
|
if (result)
|
|
return result;
|
|
|
|
result = lv1_connect_interrupt_event_receive_port(dev->bus_id,
|
|
dev->dev_id, virq_to_hw(*virq), dev->interrupt_id);
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
|
|
" failed: %s\n", __func__, __LINE__,
|
|
ps3_result(result));
|
|
ps3_event_receive_port_destroy(*virq);
|
|
*virq = NO_IRQ;
|
|
return result;
|
|
}
|
|
|
|
pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
|
|
dev->interrupt_id, *virq);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ps3_sb_event_receive_port_setup);
|
|
|
|
int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
|
|
unsigned int virq)
|
|
{
|
|
/* this should go in system-bus.c */
|
|
|
|
int result;
|
|
|
|
pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
|
|
dev->interrupt_id, virq);
|
|
|
|
result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id,
|
|
dev->dev_id, virq_to_hw(virq), dev->interrupt_id);
|
|
|
|
if (result)
|
|
pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port"
|
|
" failed: %s\n", __func__, __LINE__,
|
|
ps3_result(result));
|
|
|
|
result = ps3_event_receive_port_destroy(virq);
|
|
BUG_ON(result);
|
|
|
|
/*
|
|
* ps3_event_receive_port_destroy() destroys the IRQ plug,
|
|
* so don't call ps3_irq_plug_destroy() here.
|
|
*/
|
|
|
|
result = ps3_virq_destroy(virq);
|
|
BUG_ON(result);
|
|
|
|
pr_debug(" <- %s:%d\n", __func__, __LINE__);
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
|
|
|
|
/**
|
|
* ps3_io_irq_setup - Setup a system bus io irq.
|
|
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
|
|
* serviced on.
|
|
* @interrupt_id: The device interrupt id read from the system repository.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* An io irq represents a non-virtualized device interrupt. interrupt_id
|
|
* coresponds to the interrupt number of the interrupt controller.
|
|
*/
|
|
|
|
int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
|
|
unsigned int *virq)
|
|
{
|
|
int result;
|
|
unsigned long outlet;
|
|
|
|
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
return result;
|
|
}
|
|
|
|
result = ps3_irq_plug_setup(cpu, outlet, virq);
|
|
BUG_ON(result);
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ps3_io_irq_setup);
|
|
|
|
int ps3_io_irq_destroy(unsigned int virq)
|
|
{
|
|
int result;
|
|
unsigned long outlet = virq_to_hw(virq);
|
|
|
|
ps3_chip_mask(virq);
|
|
|
|
/*
|
|
* lv1_destruct_io_irq_outlet() will destroy the IRQ plug,
|
|
* so call ps3_irq_plug_destroy() first.
|
|
*/
|
|
|
|
result = ps3_irq_plug_destroy(virq);
|
|
BUG_ON(result);
|
|
|
|
result = lv1_destruct_io_irq_outlet(outlet);
|
|
|
|
if (result)
|
|
pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ps3_io_irq_destroy);
|
|
|
|
/**
|
|
* ps3_vuart_irq_setup - Setup the system virtual uart virq.
|
|
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
|
|
* serviced on.
|
|
* @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
* The system supports only a single virtual uart, so multiple calls without
|
|
* freeing the interrupt will return a wrong state error.
|
|
*/
|
|
|
|
int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
|
|
unsigned int *virq)
|
|
{
|
|
int result;
|
|
unsigned long outlet;
|
|
u64 lpar_addr;
|
|
|
|
BUG_ON(!is_kernel_addr((u64)virt_addr_bmp));
|
|
|
|
lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp));
|
|
|
|
result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
return result;
|
|
}
|
|
|
|
result = ps3_irq_plug_setup(cpu, outlet, virq);
|
|
BUG_ON(result);
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ps3_vuart_irq_setup);
|
|
|
|
int ps3_vuart_irq_destroy(unsigned int virq)
|
|
{
|
|
int result;
|
|
|
|
ps3_chip_mask(virq);
|
|
result = lv1_deconfigure_virtual_uart_irq();
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
return result;
|
|
}
|
|
|
|
result = ps3_irq_plug_destroy(virq);
|
|
BUG_ON(result);
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ps3_vuart_irq_destroy);
|
|
|
|
/**
|
|
* ps3_spe_irq_setup - Setup an spe virq.
|
|
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
|
|
* serviced on.
|
|
* @spe_id: The spe_id returned from lv1_construct_logical_spe().
|
|
* @class: The spe interrupt class {0,1,2}.
|
|
* @virq: The assigned Linux virq.
|
|
*
|
|
*/
|
|
|
|
int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
|
|
unsigned int class, unsigned int *virq)
|
|
{
|
|
int result;
|
|
unsigned long outlet;
|
|
|
|
BUG_ON(class > 2);
|
|
|
|
result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
|
|
|
|
if (result) {
|
|
pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
|
|
__func__, __LINE__, ps3_result(result));
|
|
return result;
|
|
}
|
|
|
|
result = ps3_irq_plug_setup(cpu, outlet, virq);
|
|
BUG_ON(result);
|
|
|
|
return result;
|
|
}
|
|
|
|
int ps3_spe_irq_destroy(unsigned int virq)
|
|
{
|
|
int result;
|
|
|
|
ps3_chip_mask(virq);
|
|
|
|
result = ps3_irq_plug_destroy(virq);
|
|
BUG_ON(result);
|
|
|
|
return result;
|
|
}
|
|
|
|
|
|
#define PS3_INVALID_OUTLET ((irq_hw_number_t)-1)
|
|
#define PS3_PLUG_MAX 63
|
|
|
|
#if defined(DEBUG)
|
|
static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
|
|
const char* func, int line)
|
|
{
|
|
pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n",
|
|
func, line, header, cpu,
|
|
*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
|
|
*p & 0xffff);
|
|
}
|
|
|
|
static void __maybe_unused _dump_256_bmp(const char *header,
|
|
const u64 *p, unsigned cpu, const char* func, int line)
|
|
{
|
|
pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n",
|
|
func, line, header, cpu, p[0], p[1], p[2], p[3]);
|
|
}
|
|
|
|
#define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__)
|
|
static void _dump_bmp(struct ps3_private* pd, const char* func, int line)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pd->bmp.lock, flags);
|
|
_dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line);
|
|
_dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
|
|
spin_unlock_irqrestore(&pd->bmp.lock, flags);
|
|
}
|
|
|
|
#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
|
|
static void __maybe_unused _dump_mask(struct ps3_private *pd,
|
|
const char* func, int line)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pd->bmp.lock, flags);
|
|
_dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
|
|
spin_unlock_irqrestore(&pd->bmp.lock, flags);
|
|
}
|
|
#else
|
|
static void dump_bmp(struct ps3_private* pd) {};
|
|
#endif /* defined(DEBUG) */
|
|
|
|
static void ps3_host_unmap(struct irq_host *h, unsigned int virq)
|
|
{
|
|
set_irq_chip_data(virq, NULL);
|
|
}
|
|
|
|
static int ps3_host_map(struct irq_host *h, unsigned int virq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
pr_debug("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
|
|
virq);
|
|
|
|
set_irq_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_host_ops ps3_host_ops = {
|
|
.map = ps3_host_map,
|
|
.unmap = ps3_host_unmap,
|
|
};
|
|
|
|
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
|
|
{
|
|
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
|
|
|
|
pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
|
|
|
|
pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
|
|
cpu, virq, pd->bmp.ipi_debug_brk_mask);
|
|
}
|
|
|
|
static unsigned int ps3_get_irq(void)
|
|
{
|
|
struct ps3_private *pd = &__get_cpu_var(ps3_private);
|
|
u64 x = (pd->bmp.status & pd->bmp.mask);
|
|
unsigned int plug;
|
|
|
|
/* check for ipi break first to stop this cpu ASAP */
|
|
|
|
if (x & pd->bmp.ipi_debug_brk_mask)
|
|
x &= pd->bmp.ipi_debug_brk_mask;
|
|
|
|
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
|
|
plug &= 0x3f;
|
|
|
|
if (unlikely(plug) == NO_IRQ) {
|
|
pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
|
|
__LINE__, pd->thread_id);
|
|
dump_bmp(&per_cpu(ps3_private, 0));
|
|
dump_bmp(&per_cpu(ps3_private, 1));
|
|
return NO_IRQ;
|
|
}
|
|
|
|
#if defined(DEBUG)
|
|
if (unlikely(plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX)) {
|
|
dump_bmp(&per_cpu(ps3_private, 0));
|
|
dump_bmp(&per_cpu(ps3_private, 1));
|
|
BUG();
|
|
}
|
|
#endif
|
|
return plug;
|
|
}
|
|
|
|
void __init ps3_init_IRQ(void)
|
|
{
|
|
int result;
|
|
unsigned cpu;
|
|
struct irq_host *host;
|
|
|
|
host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &ps3_host_ops,
|
|
PS3_INVALID_OUTLET);
|
|
irq_set_default_host(host);
|
|
irq_set_virq_count(PS3_PLUG_MAX + 1);
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
|
|
|
|
lv1_get_logical_ppe_id(&pd->ppe_id);
|
|
pd->thread_id = get_hard_smp_processor_id(cpu);
|
|
spin_lock_init(&pd->bmp.lock);
|
|
|
|
pr_debug("%s:%d: ppe_id %lu, thread_id %lu, bmp %lxh\n",
|
|
__func__, __LINE__, pd->ppe_id, pd->thread_id,
|
|
ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
|
|
|
|
result = lv1_configure_irq_state_bitmap(pd->ppe_id,
|
|
pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
|
|
|
|
if (result)
|
|
pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:"
|
|
" %s\n", __func__, __LINE__,
|
|
ps3_result(result));
|
|
}
|
|
|
|
ppc_md.get_irq = ps3_get_irq;
|
|
}
|
|
|
|
void ps3_shutdown_IRQ(int cpu)
|
|
{
|
|
int result;
|
|
u64 ppe_id;
|
|
u64 thread_id = get_hard_smp_processor_id(cpu);
|
|
|
|
lv1_get_logical_ppe_id(&ppe_id);
|
|
result = lv1_configure_irq_state_bitmap(ppe_id, thread_id, 0);
|
|
|
|
DBG("%s:%d: lv1_configure_irq_state_bitmap (%lu:%lu/%d) %s\n", __func__,
|
|
__LINE__, ppe_id, thread_id, cpu, ps3_result(result));
|
|
}
|