9934c8c045
Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
366 lines
8.1 KiB
C
366 lines
8.1 KiB
C
/*
|
|
* linux/drivers/mmc/card/queue.c
|
|
*
|
|
* Copyright (C) 2003 Russell King, All Rights Reserved.
|
|
* Copyright 2006-2007 Pierre Ossman
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include "queue.h"
|
|
|
|
#define MMC_QUEUE_BOUNCESZ 65536
|
|
|
|
#define MMC_QUEUE_SUSPENDED (1 << 0)
|
|
|
|
/*
|
|
* Prepare a MMC request. This just filters out odd stuff.
|
|
*/
|
|
static int mmc_prep_request(struct request_queue *q, struct request *req)
|
|
{
|
|
/*
|
|
* We only like normal block requests.
|
|
*/
|
|
if (!blk_fs_request(req)) {
|
|
blk_dump_rq_flags(req, "MMC bad request");
|
|
return BLKPREP_KILL;
|
|
}
|
|
|
|
req->cmd_flags |= REQ_DONTPREP;
|
|
|
|
return BLKPREP_OK;
|
|
}
|
|
|
|
static int mmc_queue_thread(void *d)
|
|
{
|
|
struct mmc_queue *mq = d;
|
|
struct request_queue *q = mq->queue;
|
|
|
|
current->flags |= PF_MEMALLOC;
|
|
|
|
down(&mq->thread_sem);
|
|
do {
|
|
struct request *req = NULL;
|
|
|
|
spin_lock_irq(q->queue_lock);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
if (!blk_queue_plugged(q))
|
|
req = blk_fetch_request(q);
|
|
mq->req = req;
|
|
spin_unlock_irq(q->queue_lock);
|
|
|
|
if (!req) {
|
|
if (kthread_should_stop()) {
|
|
set_current_state(TASK_RUNNING);
|
|
break;
|
|
}
|
|
up(&mq->thread_sem);
|
|
schedule();
|
|
down(&mq->thread_sem);
|
|
continue;
|
|
}
|
|
set_current_state(TASK_RUNNING);
|
|
|
|
mq->issue_fn(mq, req);
|
|
} while (1);
|
|
up(&mq->thread_sem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Generic MMC request handler. This is called for any queue on a
|
|
* particular host. When the host is not busy, we look for a request
|
|
* on any queue on this host, and attempt to issue it. This may
|
|
* not be the queue we were asked to process.
|
|
*/
|
|
static void mmc_request(struct request_queue *q)
|
|
{
|
|
struct mmc_queue *mq = q->queuedata;
|
|
struct request *req;
|
|
|
|
if (!mq) {
|
|
printk(KERN_ERR "MMC: killing requests for dead queue\n");
|
|
while ((req = blk_fetch_request(q)) != NULL)
|
|
__blk_end_request_all(req, -EIO);
|
|
return;
|
|
}
|
|
|
|
if (!mq->req)
|
|
wake_up_process(mq->thread);
|
|
}
|
|
|
|
/**
|
|
* mmc_init_queue - initialise a queue structure.
|
|
* @mq: mmc queue
|
|
* @card: mmc card to attach this queue
|
|
* @lock: queue lock
|
|
*
|
|
* Initialise a MMC card request queue.
|
|
*/
|
|
int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock)
|
|
{
|
|
struct mmc_host *host = card->host;
|
|
u64 limit = BLK_BOUNCE_HIGH;
|
|
int ret;
|
|
|
|
if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
|
|
limit = *mmc_dev(host)->dma_mask;
|
|
|
|
mq->card = card;
|
|
mq->queue = blk_init_queue(mmc_request, lock);
|
|
if (!mq->queue)
|
|
return -ENOMEM;
|
|
|
|
mq->queue->queuedata = mq;
|
|
mq->req = NULL;
|
|
|
|
blk_queue_prep_rq(mq->queue, mmc_prep_request);
|
|
blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN, NULL);
|
|
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
|
|
|
|
#ifdef CONFIG_MMC_BLOCK_BOUNCE
|
|
if (host->max_hw_segs == 1) {
|
|
unsigned int bouncesz;
|
|
|
|
bouncesz = MMC_QUEUE_BOUNCESZ;
|
|
|
|
if (bouncesz > host->max_req_size)
|
|
bouncesz = host->max_req_size;
|
|
if (bouncesz > host->max_seg_size)
|
|
bouncesz = host->max_seg_size;
|
|
if (bouncesz > (host->max_blk_count * 512))
|
|
bouncesz = host->max_blk_count * 512;
|
|
|
|
if (bouncesz > 512) {
|
|
mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
|
|
if (!mq->bounce_buf) {
|
|
printk(KERN_WARNING "%s: unable to "
|
|
"allocate bounce buffer\n",
|
|
mmc_card_name(card));
|
|
}
|
|
}
|
|
|
|
if (mq->bounce_buf) {
|
|
blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
|
|
blk_queue_max_sectors(mq->queue, bouncesz / 512);
|
|
blk_queue_max_phys_segments(mq->queue, bouncesz / 512);
|
|
blk_queue_max_hw_segments(mq->queue, bouncesz / 512);
|
|
blk_queue_max_segment_size(mq->queue, bouncesz);
|
|
|
|
mq->sg = kmalloc(sizeof(struct scatterlist),
|
|
GFP_KERNEL);
|
|
if (!mq->sg) {
|
|
ret = -ENOMEM;
|
|
goto cleanup_queue;
|
|
}
|
|
sg_init_table(mq->sg, 1);
|
|
|
|
mq->bounce_sg = kmalloc(sizeof(struct scatterlist) *
|
|
bouncesz / 512, GFP_KERNEL);
|
|
if (!mq->bounce_sg) {
|
|
ret = -ENOMEM;
|
|
goto cleanup_queue;
|
|
}
|
|
sg_init_table(mq->bounce_sg, bouncesz / 512);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (!mq->bounce_buf) {
|
|
blk_queue_bounce_limit(mq->queue, limit);
|
|
blk_queue_max_sectors(mq->queue,
|
|
min(host->max_blk_count, host->max_req_size / 512));
|
|
blk_queue_max_phys_segments(mq->queue, host->max_phys_segs);
|
|
blk_queue_max_hw_segments(mq->queue, host->max_hw_segs);
|
|
blk_queue_max_segment_size(mq->queue, host->max_seg_size);
|
|
|
|
mq->sg = kmalloc(sizeof(struct scatterlist) *
|
|
host->max_phys_segs, GFP_KERNEL);
|
|
if (!mq->sg) {
|
|
ret = -ENOMEM;
|
|
goto cleanup_queue;
|
|
}
|
|
sg_init_table(mq->sg, host->max_phys_segs);
|
|
}
|
|
|
|
init_MUTEX(&mq->thread_sem);
|
|
|
|
mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd");
|
|
if (IS_ERR(mq->thread)) {
|
|
ret = PTR_ERR(mq->thread);
|
|
goto free_bounce_sg;
|
|
}
|
|
|
|
return 0;
|
|
free_bounce_sg:
|
|
if (mq->bounce_sg)
|
|
kfree(mq->bounce_sg);
|
|
mq->bounce_sg = NULL;
|
|
cleanup_queue:
|
|
if (mq->sg)
|
|
kfree(mq->sg);
|
|
mq->sg = NULL;
|
|
if (mq->bounce_buf)
|
|
kfree(mq->bounce_buf);
|
|
mq->bounce_buf = NULL;
|
|
blk_cleanup_queue(mq->queue);
|
|
return ret;
|
|
}
|
|
|
|
void mmc_cleanup_queue(struct mmc_queue *mq)
|
|
{
|
|
struct request_queue *q = mq->queue;
|
|
unsigned long flags;
|
|
|
|
/* Mark that we should start throwing out stragglers */
|
|
spin_lock_irqsave(q->queue_lock, flags);
|
|
q->queuedata = NULL;
|
|
spin_unlock_irqrestore(q->queue_lock, flags);
|
|
|
|
/* Make sure the queue isn't suspended, as that will deadlock */
|
|
mmc_queue_resume(mq);
|
|
|
|
/* Then terminate our worker thread */
|
|
kthread_stop(mq->thread);
|
|
|
|
if (mq->bounce_sg)
|
|
kfree(mq->bounce_sg);
|
|
mq->bounce_sg = NULL;
|
|
|
|
kfree(mq->sg);
|
|
mq->sg = NULL;
|
|
|
|
if (mq->bounce_buf)
|
|
kfree(mq->bounce_buf);
|
|
mq->bounce_buf = NULL;
|
|
|
|
blk_cleanup_queue(mq->queue);
|
|
|
|
mq->card = NULL;
|
|
}
|
|
EXPORT_SYMBOL(mmc_cleanup_queue);
|
|
|
|
/**
|
|
* mmc_queue_suspend - suspend a MMC request queue
|
|
* @mq: MMC queue to suspend
|
|
*
|
|
* Stop the block request queue, and wait for our thread to
|
|
* complete any outstanding requests. This ensures that we
|
|
* won't suspend while a request is being processed.
|
|
*/
|
|
void mmc_queue_suspend(struct mmc_queue *mq)
|
|
{
|
|
struct request_queue *q = mq->queue;
|
|
unsigned long flags;
|
|
|
|
if (!(mq->flags & MMC_QUEUE_SUSPENDED)) {
|
|
mq->flags |= MMC_QUEUE_SUSPENDED;
|
|
|
|
spin_lock_irqsave(q->queue_lock, flags);
|
|
blk_stop_queue(q);
|
|
spin_unlock_irqrestore(q->queue_lock, flags);
|
|
|
|
down(&mq->thread_sem);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* mmc_queue_resume - resume a previously suspended MMC request queue
|
|
* @mq: MMC queue to resume
|
|
*/
|
|
void mmc_queue_resume(struct mmc_queue *mq)
|
|
{
|
|
struct request_queue *q = mq->queue;
|
|
unsigned long flags;
|
|
|
|
if (mq->flags & MMC_QUEUE_SUSPENDED) {
|
|
mq->flags &= ~MMC_QUEUE_SUSPENDED;
|
|
|
|
up(&mq->thread_sem);
|
|
|
|
spin_lock_irqsave(q->queue_lock, flags);
|
|
blk_start_queue(q);
|
|
spin_unlock_irqrestore(q->queue_lock, flags);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Prepare the sg list(s) to be handed of to the host driver
|
|
*/
|
|
unsigned int mmc_queue_map_sg(struct mmc_queue *mq)
|
|
{
|
|
unsigned int sg_len;
|
|
size_t buflen;
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
if (!mq->bounce_buf)
|
|
return blk_rq_map_sg(mq->queue, mq->req, mq->sg);
|
|
|
|
BUG_ON(!mq->bounce_sg);
|
|
|
|
sg_len = blk_rq_map_sg(mq->queue, mq->req, mq->bounce_sg);
|
|
|
|
mq->bounce_sg_len = sg_len;
|
|
|
|
buflen = 0;
|
|
for_each_sg(mq->bounce_sg, sg, sg_len, i)
|
|
buflen += sg->length;
|
|
|
|
sg_init_one(mq->sg, mq->bounce_buf, buflen);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* If writing, bounce the data to the buffer before the request
|
|
* is sent to the host driver
|
|
*/
|
|
void mmc_queue_bounce_pre(struct mmc_queue *mq)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!mq->bounce_buf)
|
|
return;
|
|
|
|
if (rq_data_dir(mq->req) != WRITE)
|
|
return;
|
|
|
|
local_irq_save(flags);
|
|
sg_copy_to_buffer(mq->bounce_sg, mq->bounce_sg_len,
|
|
mq->bounce_buf, mq->sg[0].length);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* If reading, bounce the data from the buffer after the request
|
|
* has been handled by the host driver
|
|
*/
|
|
void mmc_queue_bounce_post(struct mmc_queue *mq)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!mq->bounce_buf)
|
|
return;
|
|
|
|
if (rq_data_dir(mq->req) != READ)
|
|
return;
|
|
|
|
local_irq_save(flags);
|
|
sg_copy_from_buffer(mq->bounce_sg, mq->bounce_sg_len,
|
|
mq->bounce_buf, mq->sg[0].length);
|
|
local_irq_restore(flags);
|
|
}
|
|
|