aa8f0dc6c3
Jens Axboe pointed out that the iounmap() call in libata was occurring too early, and some drivers (ahci, probably others) were using ioremap'd memory after it had been unmapped. The patch should address that problem by way of improving the libata driver API: * move ->host_stop() call after all ->port_stop() calls have occurred. * create default helper function ata_host_stop(), and move iounmap() call there. * add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark). sata_qstor appears to require the host-stop-before-port-stop ordering that existed prior to applying the attached patch.
1506 lines
40 KiB
C
1506 lines
40 KiB
C
/*
|
|
* sata_sx4.c - Promise SATA
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc.
|
|
*
|
|
* The contents of this file are subject to the Open
|
|
* Software License version 1.1 that can be found at
|
|
* http://www.opensource.org/licenses/osl-1.1.txt and is included herein
|
|
* by reference.
|
|
*
|
|
* Alternatively, the contents of this file may be used under the terms
|
|
* of the GNU General Public License version 2 (the "GPL") as distributed
|
|
* in the kernel source COPYING file, in which case the provisions of
|
|
* the GPL are applicable instead of the above. If you wish to allow
|
|
* the use of your version of this file only under the terms of the
|
|
* GPL and not to allow others to use your version of this file under
|
|
* the OSL, indicate your decision by deleting the provisions above and
|
|
* replace them with the notice and other provisions required by the GPL.
|
|
* If you do not delete the provisions above, a recipient may use your
|
|
* version of this file under either the OSL or the GPL.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <asm/io.h>
|
|
#include "sata_promise.h"
|
|
|
|
#define DRV_NAME "sata_sx4"
|
|
#define DRV_VERSION "0.7"
|
|
|
|
|
|
enum {
|
|
PDC_PRD_TBL = 0x44, /* Direct command DMA table addr */
|
|
|
|
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
|
|
PDC_HDMA_PKT_SUBMIT = 0x100, /* Host DMA packet pointer addr */
|
|
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
|
|
PDC_HDMA_CTLSTAT = 0x12C, /* Host DMA control / status */
|
|
|
|
PDC_20621_SEQCTL = 0x400,
|
|
PDC_20621_SEQMASK = 0x480,
|
|
PDC_20621_GENERAL_CTL = 0x484,
|
|
PDC_20621_PAGE_SIZE = (32 * 1024),
|
|
|
|
/* chosen, not constant, values; we design our own DIMM mem map */
|
|
PDC_20621_DIMM_WINDOW = 0x0C, /* page# for 32K DIMM window */
|
|
PDC_20621_DIMM_BASE = 0x00200000,
|
|
PDC_20621_DIMM_DATA = (64 * 1024),
|
|
PDC_DIMM_DATA_STEP = (256 * 1024),
|
|
PDC_DIMM_WINDOW_STEP = (8 * 1024),
|
|
PDC_DIMM_HOST_PRD = (6 * 1024),
|
|
PDC_DIMM_HOST_PKT = (128 * 0),
|
|
PDC_DIMM_HPKT_PRD = (128 * 1),
|
|
PDC_DIMM_ATA_PKT = (128 * 2),
|
|
PDC_DIMM_APKT_PRD = (128 * 3),
|
|
PDC_DIMM_HEADER_SZ = PDC_DIMM_APKT_PRD + 128,
|
|
PDC_PAGE_WINDOW = 0x40,
|
|
PDC_PAGE_DATA = PDC_PAGE_WINDOW +
|
|
(PDC_20621_DIMM_DATA / PDC_20621_PAGE_SIZE),
|
|
PDC_PAGE_SET = PDC_DIMM_DATA_STEP / PDC_20621_PAGE_SIZE,
|
|
|
|
PDC_CHIP0_OFS = 0xC0000, /* offset of chip #0 */
|
|
|
|
PDC_20621_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) |
|
|
(1<<23),
|
|
|
|
board_20621 = 0, /* FastTrak S150 SX4 */
|
|
|
|
PDC_RESET = (1 << 11), /* HDMA reset */
|
|
|
|
PDC_MAX_HDMA = 32,
|
|
PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1),
|
|
|
|
PDC_DIMM0_SPD_DEV_ADDRESS = 0x50,
|
|
PDC_DIMM1_SPD_DEV_ADDRESS = 0x51,
|
|
PDC_MAX_DIMM_MODULE = 0x02,
|
|
PDC_I2C_CONTROL_OFFSET = 0x48,
|
|
PDC_I2C_ADDR_DATA_OFFSET = 0x4C,
|
|
PDC_DIMM0_CONTROL_OFFSET = 0x80,
|
|
PDC_DIMM1_CONTROL_OFFSET = 0x84,
|
|
PDC_SDRAM_CONTROL_OFFSET = 0x88,
|
|
PDC_I2C_WRITE = 0x00000000,
|
|
PDC_I2C_READ = 0x00000040,
|
|
PDC_I2C_START = 0x00000080,
|
|
PDC_I2C_MASK_INT = 0x00000020,
|
|
PDC_I2C_COMPLETE = 0x00010000,
|
|
PDC_I2C_NO_ACK = 0x00100000,
|
|
PDC_DIMM_SPD_SUBADDRESS_START = 0x00,
|
|
PDC_DIMM_SPD_SUBADDRESS_END = 0x7F,
|
|
PDC_DIMM_SPD_ROW_NUM = 3,
|
|
PDC_DIMM_SPD_COLUMN_NUM = 4,
|
|
PDC_DIMM_SPD_MODULE_ROW = 5,
|
|
PDC_DIMM_SPD_TYPE = 11,
|
|
PDC_DIMM_SPD_FRESH_RATE = 12,
|
|
PDC_DIMM_SPD_BANK_NUM = 17,
|
|
PDC_DIMM_SPD_CAS_LATENCY = 18,
|
|
PDC_DIMM_SPD_ATTRIBUTE = 21,
|
|
PDC_DIMM_SPD_ROW_PRE_CHARGE = 27,
|
|
PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28,
|
|
PDC_DIMM_SPD_RAS_CAS_DELAY = 29,
|
|
PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30,
|
|
PDC_DIMM_SPD_SYSTEM_FREQ = 126,
|
|
PDC_CTL_STATUS = 0x08,
|
|
PDC_DIMM_WINDOW_CTLR = 0x0C,
|
|
PDC_TIME_CONTROL = 0x3C,
|
|
PDC_TIME_PERIOD = 0x40,
|
|
PDC_TIME_COUNTER = 0x44,
|
|
PDC_GENERAL_CTLR = 0x484,
|
|
PCI_PLL_INIT = 0x8A531824,
|
|
PCI_X_TCOUNT = 0xEE1E5CFF
|
|
};
|
|
|
|
|
|
struct pdc_port_priv {
|
|
u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512];
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
};
|
|
|
|
struct pdc_host_priv {
|
|
void *dimm_mmio;
|
|
|
|
unsigned int doing_hdma;
|
|
unsigned int hdma_prod;
|
|
unsigned int hdma_cons;
|
|
struct {
|
|
struct ata_queued_cmd *qc;
|
|
unsigned int seq;
|
|
unsigned long pkt_ofs;
|
|
} hdma[32];
|
|
};
|
|
|
|
|
|
static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
|
|
static void pdc_eng_timeout(struct ata_port *ap);
|
|
static void pdc_20621_phy_reset (struct ata_port *ap);
|
|
static int pdc_port_start(struct ata_port *ap);
|
|
static void pdc_port_stop(struct ata_port *ap);
|
|
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void pdc20621_host_stop(struct ata_host_set *host_set);
|
|
static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe);
|
|
static int pdc20621_detect_dimm(struct ata_probe_ent *pe);
|
|
static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe,
|
|
u32 device, u32 subaddr, u32 *pdata);
|
|
static int pdc20621_prog_dimm0(struct ata_probe_ent *pe);
|
|
static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe);
|
|
#ifdef ATA_VERBOSE_DEBUG
|
|
static void pdc20621_get_from_dimm(struct ata_probe_ent *pe,
|
|
void *psource, u32 offset, u32 size);
|
|
#endif
|
|
static void pdc20621_put_to_dimm(struct ata_probe_ent *pe,
|
|
void *psource, u32 offset, u32 size);
|
|
static void pdc20621_irq_clear(struct ata_port *ap);
|
|
static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
|
|
|
|
|
|
static Scsi_Host_Template pdc_sata_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.bios_param = ata_std_bios_param,
|
|
.ordered_flush = 1,
|
|
};
|
|
|
|
static struct ata_port_operations pdc_20621_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.phy_reset = pdc_20621_phy_reset,
|
|
.qc_prep = pdc20621_qc_prep,
|
|
.qc_issue = pdc20621_qc_issue_prot,
|
|
.eng_timeout = pdc_eng_timeout,
|
|
.irq_handler = pdc20621_interrupt,
|
|
.irq_clear = pdc20621_irq_clear,
|
|
.port_start = pdc_port_start,
|
|
.port_stop = pdc_port_stop,
|
|
.host_stop = pdc20621_host_stop,
|
|
};
|
|
|
|
static struct ata_port_info pdc_port_info[] = {
|
|
/* board_20621 */
|
|
{
|
|
.sht = &pdc_sata_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SRST | ATA_FLAG_MMIO,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_20621_ops,
|
|
},
|
|
|
|
};
|
|
|
|
static struct pci_device_id pdc_sata_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_PROMISE, 0x6622, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_20621 },
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
|
|
static struct pci_driver pdc_sata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pdc_sata_pci_tbl,
|
|
.probe = pdc_sata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
|
|
static void pdc20621_host_stop(struct ata_host_set *host_set)
|
|
{
|
|
struct pdc_host_priv *hpriv = host_set->private_data;
|
|
void *dimm_mmio = hpriv->dimm_mmio;
|
|
|
|
iounmap(dimm_mmio);
|
|
kfree(hpriv);
|
|
|
|
ata_host_stop(host_set);
|
|
}
|
|
|
|
static int pdc_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct pdc_port_priv *pp;
|
|
int rc;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = kmalloc(sizeof(*pp), GFP_KERNEL);
|
|
if (!pp) {
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
memset(pp, 0, sizeof(*pp));
|
|
|
|
pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
|
|
if (!pp->pkt) {
|
|
rc = -ENOMEM;
|
|
goto err_out_kfree;
|
|
}
|
|
|
|
ap->private_data = pp;
|
|
|
|
return 0;
|
|
|
|
err_out_kfree:
|
|
kfree(pp);
|
|
err_out:
|
|
ata_port_stop(ap);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void pdc_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
|
|
ap->private_data = NULL;
|
|
dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma);
|
|
kfree(pp);
|
|
ata_port_stop(ap);
|
|
}
|
|
|
|
|
|
static void pdc_20621_phy_reset (struct ata_port *ap)
|
|
{
|
|
VPRINTK("ENTER\n");
|
|
ap->cbl = ATA_CBL_SATA;
|
|
ata_port_probe(ap);
|
|
ata_bus_reset(ap);
|
|
}
|
|
|
|
static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
|
|
unsigned int portno,
|
|
unsigned int total_len)
|
|
{
|
|
u32 addr;
|
|
unsigned int dw = PDC_DIMM_APKT_PRD >> 2;
|
|
u32 *buf32 = (u32 *) buf;
|
|
|
|
/* output ATA packet S/G table */
|
|
addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA +
|
|
(PDC_DIMM_DATA_STEP * portno);
|
|
VPRINTK("ATA sg addr 0x%x, %d\n", addr, addr);
|
|
buf32[dw] = cpu_to_le32(addr);
|
|
buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT);
|
|
|
|
VPRINTK("ATA PSG @ %x == (0x%x, 0x%x)\n",
|
|
PDC_20621_DIMM_BASE +
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
PDC_DIMM_APKT_PRD,
|
|
buf32[dw], buf32[dw + 1]);
|
|
}
|
|
|
|
static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf,
|
|
unsigned int portno,
|
|
unsigned int total_len)
|
|
{
|
|
u32 addr;
|
|
unsigned int dw = PDC_DIMM_HPKT_PRD >> 2;
|
|
u32 *buf32 = (u32 *) buf;
|
|
|
|
/* output Host DMA packet S/G table */
|
|
addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA +
|
|
(PDC_DIMM_DATA_STEP * portno);
|
|
|
|
buf32[dw] = cpu_to_le32(addr);
|
|
buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT);
|
|
|
|
VPRINTK("HOST PSG @ %x == (0x%x, 0x%x)\n",
|
|
PDC_20621_DIMM_BASE +
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
PDC_DIMM_HPKT_PRD,
|
|
buf32[dw], buf32[dw + 1]);
|
|
}
|
|
|
|
static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf,
|
|
unsigned int devno, u8 *buf,
|
|
unsigned int portno)
|
|
{
|
|
unsigned int i, dw;
|
|
u32 *buf32 = (u32 *) buf;
|
|
u8 dev_reg;
|
|
|
|
unsigned int dimm_sg = PDC_20621_DIMM_BASE +
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
PDC_DIMM_APKT_PRD;
|
|
VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg);
|
|
|
|
i = PDC_DIMM_ATA_PKT;
|
|
|
|
/*
|
|
* Set up ATA packet
|
|
*/
|
|
if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE)))
|
|
buf[i++] = PDC_PKT_READ;
|
|
else if (tf->protocol == ATA_PROT_NODATA)
|
|
buf[i++] = PDC_PKT_NODATA;
|
|
else
|
|
buf[i++] = 0;
|
|
buf[i++] = 0; /* reserved */
|
|
buf[i++] = portno + 1; /* seq. id */
|
|
buf[i++] = 0xff; /* delay seq. id */
|
|
|
|
/* dimm dma S/G, and next-pkt */
|
|
dw = i >> 2;
|
|
if (tf->protocol == ATA_PROT_NODATA)
|
|
buf32[dw] = 0;
|
|
else
|
|
buf32[dw] = cpu_to_le32(dimm_sg);
|
|
buf32[dw + 1] = 0;
|
|
i += 8;
|
|
|
|
if (devno == 0)
|
|
dev_reg = ATA_DEVICE_OBS;
|
|
else
|
|
dev_reg = ATA_DEVICE_OBS | ATA_DEV1;
|
|
|
|
/* select device */
|
|
buf[i++] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE;
|
|
buf[i++] = dev_reg;
|
|
|
|
/* device control register */
|
|
buf[i++] = (1 << 5) | PDC_REG_DEVCTL;
|
|
buf[i++] = tf->ctl;
|
|
|
|
return i;
|
|
}
|
|
|
|
static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf,
|
|
unsigned int portno)
|
|
{
|
|
unsigned int dw;
|
|
u32 tmp, *buf32 = (u32 *) buf;
|
|
|
|
unsigned int host_sg = PDC_20621_DIMM_BASE +
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
PDC_DIMM_HOST_PRD;
|
|
unsigned int dimm_sg = PDC_20621_DIMM_BASE +
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
PDC_DIMM_HPKT_PRD;
|
|
VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg);
|
|
VPRINTK("host_sg == 0x%x, %d\n", host_sg, host_sg);
|
|
|
|
dw = PDC_DIMM_HOST_PKT >> 2;
|
|
|
|
/*
|
|
* Set up Host DMA packet
|
|
*/
|
|
if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE)))
|
|
tmp = PDC_PKT_READ;
|
|
else
|
|
tmp = 0;
|
|
tmp |= ((portno + 1 + 4) << 16); /* seq. id */
|
|
tmp |= (0xff << 24); /* delay seq. id */
|
|
buf32[dw + 0] = cpu_to_le32(tmp);
|
|
buf32[dw + 1] = cpu_to_le32(host_sg);
|
|
buf32[dw + 2] = cpu_to_le32(dimm_sg);
|
|
buf32[dw + 3] = 0;
|
|
|
|
VPRINTK("HOST PKT @ %x == (0x%x 0x%x 0x%x 0x%x)\n",
|
|
PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * portno) +
|
|
PDC_DIMM_HOST_PKT,
|
|
buf32[dw + 0],
|
|
buf32[dw + 1],
|
|
buf32[dw + 2],
|
|
buf32[dw + 3]);
|
|
}
|
|
|
|
static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scatterlist *sg = qc->sg;
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
void *mmio = ap->host_set->mmio_base;
|
|
struct pdc_host_priv *hpriv = ap->host_set->private_data;
|
|
void *dimm_mmio = hpriv->dimm_mmio;
|
|
unsigned int portno = ap->port_no;
|
|
unsigned int i, last, idx, total_len = 0, sgt_len;
|
|
u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
|
|
|
|
assert(qc->flags & ATA_QCFLAG_DMAMAP);
|
|
|
|
VPRINTK("ata%u: ENTER\n", ap->id);
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
/*
|
|
* Build S/G table
|
|
*/
|
|
last = qc->n_elem;
|
|
idx = 0;
|
|
for (i = 0; i < last; i++) {
|
|
buf[idx++] = cpu_to_le32(sg_dma_address(&sg[i]));
|
|
buf[idx++] = cpu_to_le32(sg_dma_len(&sg[i]));
|
|
total_len += sg[i].length;
|
|
}
|
|
buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT);
|
|
sgt_len = idx * 4;
|
|
|
|
/*
|
|
* Build ATA, host DMA packets
|
|
*/
|
|
pdc20621_host_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len);
|
|
pdc20621_host_pkt(&qc->tf, &pp->dimm_buf[0], portno);
|
|
|
|
pdc20621_ata_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len);
|
|
i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno);
|
|
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i);
|
|
else
|
|
i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
/* copy three S/G tables and two packets to DIMM MMIO window */
|
|
memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP),
|
|
&pp->dimm_buf, PDC_DIMM_HEADER_SZ);
|
|
memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP) +
|
|
PDC_DIMM_HOST_PRD,
|
|
&pp->dimm_buf[PDC_DIMM_HEADER_SZ], sgt_len);
|
|
|
|
/* force host FIFO dump */
|
|
writel(0x00000001, mmio + PDC_20621_GENERAL_CTL);
|
|
|
|
readl(dimm_mmio); /* MMIO PCI posting flush */
|
|
|
|
VPRINTK("ata pkt buf ofs %u, prd size %u, mmio copied\n", i, sgt_len);
|
|
}
|
|
|
|
static void pdc20621_nodata_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
void *mmio = ap->host_set->mmio_base;
|
|
struct pdc_host_priv *hpriv = ap->host_set->private_data;
|
|
void *dimm_mmio = hpriv->dimm_mmio;
|
|
unsigned int portno = ap->port_no;
|
|
unsigned int i;
|
|
|
|
VPRINTK("ata%u: ENTER\n", ap->id);
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno);
|
|
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i);
|
|
else
|
|
i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
/* copy three S/G tables and two packets to DIMM MMIO window */
|
|
memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP),
|
|
&pp->dimm_buf, PDC_DIMM_HEADER_SZ);
|
|
|
|
/* force host FIFO dump */
|
|
writel(0x00000001, mmio + PDC_20621_GENERAL_CTL);
|
|
|
|
readl(dimm_mmio); /* MMIO PCI posting flush */
|
|
|
|
VPRINTK("ata pkt buf ofs %u, mmio copied\n", i);
|
|
}
|
|
|
|
static void pdc20621_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
pdc20621_dma_prep(qc);
|
|
break;
|
|
case ATA_PROT_NODATA:
|
|
pdc20621_nodata_prep(qc);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __pdc20621_push_hdma(struct ata_queued_cmd *qc,
|
|
unsigned int seq,
|
|
u32 pkt_ofs)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_host_set *host_set = ap->host_set;
|
|
void *mmio = host_set->mmio_base;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */
|
|
|
|
writel(pkt_ofs, mmio + PDC_HDMA_PKT_SUBMIT);
|
|
readl(mmio + PDC_HDMA_PKT_SUBMIT); /* flush */
|
|
}
|
|
|
|
static void pdc20621_push_hdma(struct ata_queued_cmd *qc,
|
|
unsigned int seq,
|
|
u32 pkt_ofs)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_host_priv *pp = ap->host_set->private_data;
|
|
unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK;
|
|
|
|
if (!pp->doing_hdma) {
|
|
__pdc20621_push_hdma(qc, seq, pkt_ofs);
|
|
pp->doing_hdma = 1;
|
|
return;
|
|
}
|
|
|
|
pp->hdma[idx].qc = qc;
|
|
pp->hdma[idx].seq = seq;
|
|
pp->hdma[idx].pkt_ofs = pkt_ofs;
|
|
pp->hdma_prod++;
|
|
}
|
|
|
|
static void pdc20621_pop_hdma(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_host_priv *pp = ap->host_set->private_data;
|
|
unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK;
|
|
|
|
/* if nothing on queue, we're done */
|
|
if (pp->hdma_prod == pp->hdma_cons) {
|
|
pp->doing_hdma = 0;
|
|
return;
|
|
}
|
|
|
|
__pdc20621_push_hdma(pp->hdma[idx].qc, pp->hdma[idx].seq,
|
|
pp->hdma[idx].pkt_ofs);
|
|
pp->hdma_cons++;
|
|
}
|
|
|
|
#ifdef ATA_VERBOSE_DEBUG
|
|
static void pdc20621_dump_hdma(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int port_no = ap->port_no;
|
|
struct pdc_host_priv *hpriv = ap->host_set->private_data;
|
|
void *dimm_mmio = hpriv->dimm_mmio;
|
|
|
|
dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP);
|
|
dimm_mmio += PDC_DIMM_HOST_PKT;
|
|
|
|
printk(KERN_ERR "HDMA[0] == 0x%08X\n", readl(dimm_mmio));
|
|
printk(KERN_ERR "HDMA[1] == 0x%08X\n", readl(dimm_mmio + 4));
|
|
printk(KERN_ERR "HDMA[2] == 0x%08X\n", readl(dimm_mmio + 8));
|
|
printk(KERN_ERR "HDMA[3] == 0x%08X\n", readl(dimm_mmio + 12));
|
|
}
|
|
#else
|
|
static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { }
|
|
#endif /* ATA_VERBOSE_DEBUG */
|
|
|
|
static void pdc20621_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_host_set *host_set = ap->host_set;
|
|
unsigned int port_no = ap->port_no;
|
|
void *mmio = host_set->mmio_base;
|
|
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
u8 seq = (u8) (port_no + 1);
|
|
unsigned int port_ofs;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
VPRINTK("ata%u: ENTER\n", ap->id);
|
|
|
|
wmb(); /* flush PRD, pkt writes */
|
|
|
|
port_ofs = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no);
|
|
|
|
/* if writing, we (1) DMA to DIMM, then (2) do ATA command */
|
|
if (rw && qc->tf.protocol == ATA_PROT_DMA) {
|
|
seq += 4;
|
|
|
|
pdc20621_dump_hdma(qc);
|
|
pdc20621_push_hdma(qc, seq, port_ofs + PDC_DIMM_HOST_PKT);
|
|
VPRINTK("queued ofs 0x%x (%u), seq %u\n",
|
|
port_ofs + PDC_DIMM_HOST_PKT,
|
|
port_ofs + PDC_DIMM_HOST_PKT,
|
|
seq);
|
|
} else {
|
|
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */
|
|
|
|
writel(port_ofs + PDC_DIMM_ATA_PKT,
|
|
(void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
VPRINTK("submitted ofs 0x%x (%u), seq %u\n",
|
|
port_ofs + PDC_DIMM_ATA_PKT,
|
|
port_ofs + PDC_DIMM_ATA_PKT,
|
|
seq);
|
|
}
|
|
}
|
|
|
|
static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
pdc20621_packet_start(qc);
|
|
return 0;
|
|
|
|
case ATA_PROT_ATAPI_DMA:
|
|
BUG();
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
|
|
struct ata_queued_cmd *qc,
|
|
unsigned int doing_hdma,
|
|
void *mmio)
|
|
{
|
|
unsigned int port_no = ap->port_no;
|
|
unsigned int port_ofs =
|
|
PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no);
|
|
u8 status;
|
|
unsigned int handled = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if ((qc->tf.protocol == ATA_PROT_DMA) && /* read */
|
|
(!(qc->tf.flags & ATA_TFLAG_WRITE))) {
|
|
|
|
/* step two - DMA from DIMM to host */
|
|
if (doing_hdma) {
|
|
VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
/* get drive status; clear intr; complete txn */
|
|
ata_qc_complete(qc, ata_wait_idle(ap));
|
|
pdc20621_pop_hdma(qc);
|
|
}
|
|
|
|
/* step one - exec ATA command */
|
|
else {
|
|
u8 seq = (u8) (port_no + 1 + 4);
|
|
VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id,
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
|
|
/* submit hdma pkt */
|
|
pdc20621_dump_hdma(qc);
|
|
pdc20621_push_hdma(qc, seq,
|
|
port_ofs + PDC_DIMM_HOST_PKT);
|
|
}
|
|
handled = 1;
|
|
|
|
} else if (qc->tf.protocol == ATA_PROT_DMA) { /* write */
|
|
|
|
/* step one - DMA from host to DIMM */
|
|
if (doing_hdma) {
|
|
u8 seq = (u8) (port_no + 1);
|
|
VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id,
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
|
|
/* submit ata pkt */
|
|
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
readl(mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
writel(port_ofs + PDC_DIMM_ATA_PKT,
|
|
(void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
}
|
|
|
|
/* step two - execute ATA command */
|
|
else {
|
|
VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
/* get drive status; clear intr; complete txn */
|
|
ata_qc_complete(qc, ata_wait_idle(ap));
|
|
pdc20621_pop_hdma(qc);
|
|
}
|
|
handled = 1;
|
|
|
|
/* command completion, but no data xfer */
|
|
} else if (qc->tf.protocol == ATA_PROT_NODATA) {
|
|
|
|
status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
|
|
DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
|
|
ata_qc_complete(qc, status);
|
|
handled = 1;
|
|
|
|
} else {
|
|
ap->stats.idle_irq++;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void pdc20621_irq_clear(struct ata_port *ap)
|
|
{
|
|
struct ata_host_set *host_set = ap->host_set;
|
|
void *mmio = host_set->mmio_base;
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
readl(mmio + PDC_20621_SEQMASK);
|
|
}
|
|
|
|
static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
|
|
{
|
|
struct ata_host_set *host_set = dev_instance;
|
|
struct ata_port *ap;
|
|
u32 mask = 0;
|
|
unsigned int i, tmp, port_no;
|
|
unsigned int handled = 0;
|
|
void *mmio_base;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if (!host_set || !host_set->mmio_base) {
|
|
VPRINTK("QUICK EXIT\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
mmio_base = host_set->mmio_base;
|
|
|
|
/* reading should also clear interrupts */
|
|
mmio_base += PDC_CHIP0_OFS;
|
|
mask = readl(mmio_base + PDC_20621_SEQMASK);
|
|
VPRINTK("mask == 0x%x\n", mask);
|
|
|
|
if (mask == 0xffffffff) {
|
|
VPRINTK("QUICK EXIT 2\n");
|
|
return IRQ_NONE;
|
|
}
|
|
mask &= 0xffff; /* only 16 tags possible */
|
|
if (!mask) {
|
|
VPRINTK("QUICK EXIT 3\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
spin_lock(&host_set->lock);
|
|
|
|
for (i = 1; i < 9; i++) {
|
|
port_no = i - 1;
|
|
if (port_no > 3)
|
|
port_no -= 4;
|
|
if (port_no >= host_set->n_ports)
|
|
ap = NULL;
|
|
else
|
|
ap = host_set->ports[port_no];
|
|
tmp = mask & (1 << i);
|
|
VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp);
|
|
if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc && (!(qc->tf.ctl & ATA_NIEN)))
|
|
handled += pdc20621_host_intr(ap, qc, (i > 4),
|
|
mmio_base);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&host_set->lock);
|
|
|
|
VPRINTK("mask == 0x%x\n", mask);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void pdc_eng_timeout(struct ata_port *ap)
|
|
{
|
|
u8 drv_stat;
|
|
struct ata_queued_cmd *qc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (!qc) {
|
|
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
|
|
ap->id);
|
|
goto out;
|
|
}
|
|
|
|
/* hack alert! We cannot use the supplied completion
|
|
* function from inside the ->eh_strategy_handler() thread.
|
|
* libata is the only user of ->eh_strategy_handler() in
|
|
* any kernel, so the default scsi_done() assumes it is
|
|
* not being called from the SCSI EH.
|
|
*/
|
|
qc->scsidone = scsi_finish_command;
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
|
|
ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
|
|
break;
|
|
|
|
default:
|
|
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
|
|
|
|
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
|
|
ap->id, qc->tf.command, drv_stat);
|
|
|
|
ata_qc_complete(qc, drv_stat);
|
|
break;
|
|
}
|
|
|
|
out:
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_NODATA);
|
|
ata_tf_load(ap, tf);
|
|
}
|
|
|
|
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_NODATA);
|
|
ata_exec_command(ap, tf);
|
|
}
|
|
|
|
|
|
static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base)
|
|
{
|
|
port->cmd_addr = base;
|
|
port->data_addr = base;
|
|
port->feature_addr =
|
|
port->error_addr = base + 0x4;
|
|
port->nsect_addr = base + 0x8;
|
|
port->lbal_addr = base + 0xc;
|
|
port->lbam_addr = base + 0x10;
|
|
port->lbah_addr = base + 0x14;
|
|
port->device_addr = base + 0x18;
|
|
port->command_addr =
|
|
port->status_addr = base + 0x1c;
|
|
port->altstatus_addr =
|
|
port->ctl_addr = base + 0x38;
|
|
}
|
|
|
|
|
|
#ifdef ATA_VERBOSE_DEBUG
|
|
static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource,
|
|
u32 offset, u32 size)
|
|
{
|
|
u32 window_size;
|
|
u16 idx;
|
|
u8 page_mask;
|
|
long dist;
|
|
void *mmio = pe->mmio_base;
|
|
struct pdc_host_priv *hpriv = pe->private_data;
|
|
void *dimm_mmio = hpriv->dimm_mmio;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
page_mask = 0x00;
|
|
window_size = 0x2000 * 4; /* 32K byte uchar size */
|
|
idx = (u16) (offset / window_size);
|
|
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
offset -= (idx * window_size);
|
|
idx++;
|
|
dist = ((long) (window_size - (offset + size))) >= 0 ? size :
|
|
(long) (window_size - offset);
|
|
memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4),
|
|
dist);
|
|
|
|
psource += dist;
|
|
size -= dist;
|
|
for (; (long) size >= (long) window_size ;) {
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
|
memcpy_fromio((char *) psource, (char *) (dimm_mmio),
|
|
window_size / 4);
|
|
psource += window_size;
|
|
size -= window_size;
|
|
idx ++;
|
|
}
|
|
|
|
if (size) {
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
|
memcpy_fromio((char *) psource, (char *) (dimm_mmio),
|
|
size / 4);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource,
|
|
u32 offset, u32 size)
|
|
{
|
|
u32 window_size;
|
|
u16 idx;
|
|
u8 page_mask;
|
|
long dist;
|
|
void *mmio = pe->mmio_base;
|
|
struct pdc_host_priv *hpriv = pe->private_data;
|
|
void *dimm_mmio = hpriv->dimm_mmio;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
page_mask = 0x00;
|
|
window_size = 0x2000 * 4; /* 32K byte uchar size */
|
|
idx = (u16) (offset / window_size);
|
|
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
|
offset -= (idx * window_size);
|
|
idx++;
|
|
dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size :
|
|
(long) (window_size - offset);
|
|
memcpy_toio((char *) (dimm_mmio + offset / 4), (char *) psource, dist);
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
|
|
psource += dist;
|
|
size -= dist;
|
|
for (; (long) size >= (long) window_size ;) {
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
|
memcpy_toio((char *) (dimm_mmio), (char *) psource,
|
|
window_size / 4);
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
psource += window_size;
|
|
size -= window_size;
|
|
idx ++;
|
|
}
|
|
|
|
if (size) {
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
|
memcpy_toio((char *) (dimm_mmio), (char *) psource, size / 4);
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
}
|
|
}
|
|
|
|
|
|
static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device,
|
|
u32 subaddr, u32 *pdata)
|
|
{
|
|
void *mmio = pe->mmio_base;
|
|
u32 i2creg = 0;
|
|
u32 status;
|
|
u32 count =0;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
i2creg |= device << 24;
|
|
i2creg |= subaddr << 16;
|
|
|
|
/* Set the device and subaddress */
|
|
writel(i2creg, mmio + PDC_I2C_ADDR_DATA_OFFSET);
|
|
readl(mmio + PDC_I2C_ADDR_DATA_OFFSET);
|
|
|
|
/* Write Control to perform read operation, mask int */
|
|
writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT,
|
|
mmio + PDC_I2C_CONTROL_OFFSET);
|
|
|
|
for (count = 0; count <= 1000; count ++) {
|
|
status = readl(mmio + PDC_I2C_CONTROL_OFFSET);
|
|
if (status & PDC_I2C_COMPLETE) {
|
|
status = readl(mmio + PDC_I2C_ADDR_DATA_OFFSET);
|
|
break;
|
|
} else if (count == 1000)
|
|
return 0;
|
|
}
|
|
|
|
*pdata = (status >> 8) & 0x000000ff;
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int pdc20621_detect_dimm(struct ata_probe_ent *pe)
|
|
{
|
|
u32 data=0 ;
|
|
if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
|
|
PDC_DIMM_SPD_SYSTEM_FREQ, &data)) {
|
|
if (data == 100)
|
|
return 100;
|
|
} else
|
|
return 0;
|
|
|
|
if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
|
|
if(data <= 0x75)
|
|
return 133;
|
|
} else
|
|
return 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int pdc20621_prog_dimm0(struct ata_probe_ent *pe)
|
|
{
|
|
u32 spd0[50];
|
|
u32 data = 0;
|
|
int size, i;
|
|
u8 bdimmsize;
|
|
void *mmio = pe->mmio_base;
|
|
static const struct {
|
|
unsigned int reg;
|
|
unsigned int ofs;
|
|
} pdc_i2c_read_data [] = {
|
|
{ PDC_DIMM_SPD_TYPE, 11 },
|
|
{ PDC_DIMM_SPD_FRESH_RATE, 12 },
|
|
{ PDC_DIMM_SPD_COLUMN_NUM, 4 },
|
|
{ PDC_DIMM_SPD_ATTRIBUTE, 21 },
|
|
{ PDC_DIMM_SPD_ROW_NUM, 3 },
|
|
{ PDC_DIMM_SPD_BANK_NUM, 17 },
|
|
{ PDC_DIMM_SPD_MODULE_ROW, 5 },
|
|
{ PDC_DIMM_SPD_ROW_PRE_CHARGE, 27 },
|
|
{ PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 },
|
|
{ PDC_DIMM_SPD_RAS_CAS_DELAY, 29 },
|
|
{ PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 },
|
|
{ PDC_DIMM_SPD_CAS_LATENCY, 18 },
|
|
};
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++)
|
|
pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
|
|
pdc_i2c_read_data[i].reg,
|
|
&spd0[pdc_i2c_read_data[i].ofs]);
|
|
|
|
data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4);
|
|
data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
|
|
((((spd0[27] + 9) / 10) - 1) << 8) ;
|
|
data |= (((((spd0[29] > spd0[28])
|
|
? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10;
|
|
data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12;
|
|
|
|
if (spd0[18] & 0x08)
|
|
data |= ((0x03) << 14);
|
|
else if (spd0[18] & 0x04)
|
|
data |= ((0x02) << 14);
|
|
else if (spd0[18] & 0x01)
|
|
data |= ((0x01) << 14);
|
|
else
|
|
data |= (0 << 14);
|
|
|
|
/*
|
|
Calculate the size of bDIMMSize (power of 2) and
|
|
merge the DIMM size by program start/end address.
|
|
*/
|
|
|
|
bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3;
|
|
size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */
|
|
data |= (((size / 16) - 1) << 16);
|
|
data |= (0 << 23);
|
|
data |= 8;
|
|
writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET);
|
|
readl(mmio + PDC_DIMM0_CONTROL_OFFSET);
|
|
return size;
|
|
}
|
|
|
|
|
|
static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe)
|
|
{
|
|
u32 data, spd0;
|
|
int error, i;
|
|
void *mmio = pe->mmio_base;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
/*
|
|
Set To Default : DIMM Module Global Control Register (0x022259F1)
|
|
DIMM Arbitration Disable (bit 20)
|
|
DIMM Data/Control Output Driving Selection (bit12 - bit15)
|
|
Refresh Enable (bit 17)
|
|
*/
|
|
|
|
data = 0x022259F1;
|
|
writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
|
|
readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
|
|
|
|
/* Turn on for ECC */
|
|
pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
|
|
PDC_DIMM_SPD_TYPE, &spd0);
|
|
if (spd0 == 0x02) {
|
|
data |= (0x01 << 16);
|
|
writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
|
|
readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
|
|
printk(KERN_ERR "Local DIMM ECC Enabled\n");
|
|
}
|
|
|
|
/* DIMM Initialization Select/Enable (bit 18/19) */
|
|
data &= (~(1<<18));
|
|
data |= (1<<19);
|
|
writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
|
|
|
|
error = 1;
|
|
for (i = 1; i <= 10; i++) { /* polling ~5 secs */
|
|
data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
|
|
if (!(data & (1<<19))) {
|
|
error = 0;
|
|
break;
|
|
}
|
|
msleep(i*100);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
|
|
static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
|
|
{
|
|
int speed, size, length;
|
|
u32 addr,spd0,pci_status;
|
|
u32 tmp=0;
|
|
u32 time_period=0;
|
|
u32 tcount=0;
|
|
u32 ticks=0;
|
|
u32 clock=0;
|
|
u32 fparam=0;
|
|
void *mmio = pe->mmio_base;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
/* Initialize PLL based upon PCI Bus Frequency */
|
|
|
|
/* Initialize Time Period Register */
|
|
writel(0xffffffff, mmio + PDC_TIME_PERIOD);
|
|
time_period = readl(mmio + PDC_TIME_PERIOD);
|
|
VPRINTK("Time Period Register (0x40): 0x%x\n", time_period);
|
|
|
|
/* Enable timer */
|
|
writel(0x00001a0, mmio + PDC_TIME_CONTROL);
|
|
readl(mmio + PDC_TIME_CONTROL);
|
|
|
|
/* Wait 3 seconds */
|
|
msleep(3000);
|
|
|
|
/*
|
|
When timer is enabled, counter is decreased every internal
|
|
clock cycle.
|
|
*/
|
|
|
|
tcount = readl(mmio + PDC_TIME_COUNTER);
|
|
VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount);
|
|
|
|
/*
|
|
If SX4 is on PCI-X bus, after 3 seconds, the timer counter
|
|
register should be >= (0xffffffff - 3x10^8).
|
|
*/
|
|
if(tcount >= PCI_X_TCOUNT) {
|
|
ticks = (time_period - tcount);
|
|
VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks);
|
|
|
|
clock = (ticks / 300000);
|
|
VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock);
|
|
|
|
clock = (clock * 33);
|
|
VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock);
|
|
|
|
/* PLL F Param (bit 22:16) */
|
|
fparam = (1400000 / clock) - 2;
|
|
VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam);
|
|
|
|
/* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */
|
|
pci_status = (0x8a001824 | (fparam << 16));
|
|
} else
|
|
pci_status = PCI_PLL_INIT;
|
|
|
|
/* Initialize PLL. */
|
|
VPRINTK("pci_status: 0x%x\n", pci_status);
|
|
writel(pci_status, mmio + PDC_CTL_STATUS);
|
|
readl(mmio + PDC_CTL_STATUS);
|
|
|
|
/*
|
|
Read SPD of DIMM by I2C interface,
|
|
and program the DIMM Module Controller.
|
|
*/
|
|
if (!(speed = pdc20621_detect_dimm(pe))) {
|
|
printk(KERN_ERR "Detect Local DIMM Fail\n");
|
|
return 1; /* DIMM error */
|
|
}
|
|
VPRINTK("Local DIMM Speed = %d\n", speed);
|
|
|
|
/* Programming DIMM0 Module Control Register (index_CID0:80h) */
|
|
size = pdc20621_prog_dimm0(pe);
|
|
VPRINTK("Local DIMM Size = %dMB\n",size);
|
|
|
|
/* Programming DIMM Module Global Control Register (index_CID0:88h) */
|
|
if (pdc20621_prog_dimm_global(pe)) {
|
|
printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n");
|
|
return 1;
|
|
}
|
|
|
|
#ifdef ATA_VERBOSE_DEBUG
|
|
{
|
|
u8 test_parttern1[40] = {0x55,0xAA,'P','r','o','m','i','s','e',' ',
|
|
'N','o','t',' ','Y','e','t',' ','D','e','f','i','n','e','d',' ',
|
|
'1','.','1','0',
|
|
'9','8','0','3','1','6','1','2',0,0};
|
|
u8 test_parttern2[40] = {0};
|
|
|
|
pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x10040, 40);
|
|
pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x40, 40);
|
|
|
|
pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40);
|
|
pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
|
|
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
|
|
test_parttern2[1], &(test_parttern2[2]));
|
|
pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040,
|
|
40);
|
|
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
|
|
test_parttern2[1], &(test_parttern2[2]));
|
|
|
|
pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40);
|
|
pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
|
|
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
|
|
test_parttern2[1], &(test_parttern2[2]));
|
|
}
|
|
#endif
|
|
|
|
/* ECC initiliazation. */
|
|
|
|
pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
|
|
PDC_DIMM_SPD_TYPE, &spd0);
|
|
if (spd0 == 0x02) {
|
|
VPRINTK("Start ECC initialization\n");
|
|
addr = 0;
|
|
length = size * 1024 * 1024;
|
|
while (addr < length) {
|
|
pdc20621_put_to_dimm(pe, (void *) &tmp, addr,
|
|
sizeof(u32));
|
|
addr += sizeof(u32);
|
|
}
|
|
VPRINTK("Finish ECC initialization\n");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void pdc_20621_init(struct ata_probe_ent *pe)
|
|
{
|
|
u32 tmp;
|
|
void *mmio = pe->mmio_base;
|
|
|
|
/* hard-code chip #0 */
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
/*
|
|
* Select page 0x40 for our 32k DIMM window
|
|
*/
|
|
tmp = readl(mmio + PDC_20621_DIMM_WINDOW) & 0xffff0000;
|
|
tmp |= PDC_PAGE_WINDOW; /* page 40h; arbitrarily selected */
|
|
writel(tmp, mmio + PDC_20621_DIMM_WINDOW);
|
|
|
|
/*
|
|
* Reset Host DMA
|
|
*/
|
|
tmp = readl(mmio + PDC_HDMA_CTLSTAT);
|
|
tmp |= PDC_RESET;
|
|
writel(tmp, mmio + PDC_HDMA_CTLSTAT);
|
|
readl(mmio + PDC_HDMA_CTLSTAT); /* flush */
|
|
|
|
udelay(10);
|
|
|
|
tmp = readl(mmio + PDC_HDMA_CTLSTAT);
|
|
tmp &= ~PDC_RESET;
|
|
writel(tmp, mmio + PDC_HDMA_CTLSTAT);
|
|
readl(mmio + PDC_HDMA_CTLSTAT); /* flush */
|
|
}
|
|
|
|
static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
unsigned long base;
|
|
void *mmio_base, *dimm_mmio = NULL;
|
|
struct pdc_host_priv *hpriv = NULL;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
int pci_dev_busy = 0;
|
|
int rc;
|
|
|
|
if (!printed_version++)
|
|
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
|
|
|
|
/*
|
|
* If this driver happens to only be useful on Apple's K2, then
|
|
* we should check that here as it has a normal Serverworks ID
|
|
*/
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc) {
|
|
pci_dev_busy = 1;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
|
|
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
|
|
if (probe_ent == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
memset(probe_ent, 0, sizeof(*probe_ent));
|
|
probe_ent->dev = pci_dev_to_dev(pdev);
|
|
INIT_LIST_HEAD(&probe_ent->node);
|
|
|
|
mmio_base = ioremap(pci_resource_start(pdev, 3),
|
|
pci_resource_len(pdev, 3));
|
|
if (mmio_base == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_free_ent;
|
|
}
|
|
base = (unsigned long) mmio_base;
|
|
|
|
hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv) {
|
|
rc = -ENOMEM;
|
|
goto err_out_iounmap;
|
|
}
|
|
memset(hpriv, 0, sizeof(*hpriv));
|
|
|
|
dimm_mmio = ioremap(pci_resource_start(pdev, 4),
|
|
pci_resource_len(pdev, 4));
|
|
if (!dimm_mmio) {
|
|
kfree(hpriv);
|
|
rc = -ENOMEM;
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
hpriv->dimm_mmio = dimm_mmio;
|
|
|
|
probe_ent->sht = pdc_port_info[board_idx].sht;
|
|
probe_ent->host_flags = pdc_port_info[board_idx].host_flags;
|
|
probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask;
|
|
probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask;
|
|
probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask;
|
|
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
|
|
|
|
probe_ent->irq = pdev->irq;
|
|
probe_ent->irq_flags = SA_SHIRQ;
|
|
probe_ent->mmio_base = mmio_base;
|
|
|
|
probe_ent->private_data = hpriv;
|
|
base += PDC_CHIP0_OFS;
|
|
|
|
probe_ent->n_ports = 4;
|
|
pdc_sata_setup_port(&probe_ent->port[0], base + 0x200);
|
|
pdc_sata_setup_port(&probe_ent->port[1], base + 0x280);
|
|
pdc_sata_setup_port(&probe_ent->port[2], base + 0x300);
|
|
pdc_sata_setup_port(&probe_ent->port[3], base + 0x380);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* initialize adapter */
|
|
/* initialize local dimm */
|
|
if (pdc20621_dimm_init(probe_ent)) {
|
|
rc = -ENOMEM;
|
|
goto err_out_iounmap_dimm;
|
|
}
|
|
pdc_20621_init(probe_ent);
|
|
|
|
/* FIXME: check ata_device_add return value */
|
|
ata_device_add(probe_ent);
|
|
kfree(probe_ent);
|
|
|
|
return 0;
|
|
|
|
err_out_iounmap_dimm: /* only get to this label if 20621 */
|
|
kfree(hpriv);
|
|
iounmap(dimm_mmio);
|
|
err_out_iounmap:
|
|
iounmap(mmio_base);
|
|
err_out_free_ent:
|
|
kfree(probe_ent);
|
|
err_out_regions:
|
|
pci_release_regions(pdev);
|
|
err_out:
|
|
if (!pci_dev_busy)
|
|
pci_disable_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int __init pdc_sata_init(void)
|
|
{
|
|
return pci_module_init(&pdc_sata_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit pdc_sata_exit(void)
|
|
{
|
|
pci_unregister_driver(&pdc_sata_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("Promise SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(pdc_sata_init);
|
|
module_exit(pdc_sata_exit);
|