android_kernel_xiaomi_sm8350/drivers/scsi
Kay Sievers bfd129445f [SCSI] switch sdev sysfs attributes to default attributes
This removes the unused sysfs attribute overwriting logic for most of
the attributes, and plugs them into the driver core default attribute
creation.

Without this patch, at the time of the events for the SCSI LUN's, there
will be no sysfs files, because their creation is delayed until the sd
driver has spun up the disks, which might take several seconds. It is the
last WAIT_FOR_SYSFS rule in the default udev setup which can be removed
with this change.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:48:22 -04:00
..
aacraid [SCSI] aacraid: rename check_reset 2007-10-12 14:40:07 -04:00
aic7xxx [SCSI] aic7xxx: cap maxsync according to correct card limits 2007-07-31 10:44:26 -05:00
aic7xxx_old
aic94xx [SCSI] aic94xx: Add new PCI ID for ASC58300 2007-10-12 14:46:47 -04:00
arcmsr Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-15 16:51:54 -07:00
arm Remove the arm26 port 2007-07-31 15:39:39 -07:00
dpt
ibmvscsi [SCSI] srp_transport: convert to use supported_mode attribute 2007-10-12 14:47:02 -04:00
libsas [SCSI] libsas: fix build dependencies on libata 2007-07-31 10:40:48 -05:00
lpfc [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
megaraid some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
pcmcia Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-22 11:36:49 -07:00
qla2xxx [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
qla4xxx mm: Remove slab destructors from kmem_cache_create(). 2007-07-20 10:11:58 +09:00
sym53c8xx_2 [SCSI] sym53c8xx: don't claim cpqarray device 2007-07-24 18:38:46 -04:00
.gitignore
3w-9xxx.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-22 11:36:49 -07:00
3w-9xxx.h [SCSI] 3w-9xxx: add support for 9690SA 2007-07-21 08:57:40 -05:00
3w-xxxx.c [SCSI] 3w-xxxx: convert to use the data buffer accessors 2007-05-30 23:29:32 -05:00
3w-xxxx.h
53c700_d.h_shipped
53c700.c [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs 2007-07-14 19:12:43 -05:00
53c700.h [SCSI] 53c700: m68k support for the 53c700 SCSI core 2007-06-17 16:15:56 -05:00
53c700.scr
a100u2w.c [SCSI] a100u2w: Convert into Linux style 2007-06-17 16:09:29 -05:00
a100u2w.h [SCSI] a100u2w: Convert into Linux style 2007-06-17 16:09:29 -05:00
a2091.c
a2091.h
a3000.c
a3000.h
a4000t.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
advansys.c [SCSI] advansys: Use DRV_NAME 2007-10-12 14:48:19 -04:00
aha152x.c [SCSI] aha152x: use data accessors and !use_sg cleanup 2007-08-04 09:14:49 -05:00
aha152x.h [SCSI] aha152x: fix debug mode symbol conflict 2007-08-04 09:11:06 -05:00
aha1542.c
aha1542.h
aha1740.c [SCSI] aha1740: convert to use the data buffer accessors 2007-05-26 19:12:56 -05:00
aha1740.h
aic7xxx_old.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
atari_dma_emul.c
atari_NCR5380.c [SCSI] atari_NCR5380: update_timeout removal 2007-06-04 09:55:15 -05:00
atari_scsi.c
atari_scsi.h
atp870u.c
atp870u.h
blz1230.c
blz2060.c
BusLogic.c [SCSI] BusLogic: convert to use the data buffer accessors 2007-05-26 19:21:37 -05:00
BusLogic.h
bvme6000_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
ch.c
constants.c [SCSI] make scsi_decode_sense_buffer and scsi_decode_sense_extras static 2007-10-12 14:40:25 -04:00
cyberstorm.c
cyberstormII.c
dc395x.c [SCSI] dc395x: convert to use the data buffer accessors 2007-07-15 10:04:49 -05:00
dc395x.h
dec_esp.c
dmx3191d.c
dpt_i2o.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
dpti.h [SCSI] dpt_i2o: convert to SCSI hotplug model 2007-07-31 10:49:58 -05:00
dtc.c [SCSI] dtc: clean up indent damage and add printk levels 2007-10-12 14:40:29 -04:00
dtc.h
eata_generic.h
eata_pio.c
eata_pio.h
eata.c [SCSI] eata: convert to use the data buffer accessors 2007-05-26 19:13:55 -05:00
esp_scsi.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-15 16:51:54 -07:00
esp_scsi.h [SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250 2007-07-31 10:51:25 -05:00
fastlane.c
fcal.c
fcal.h
fd_mcs.c
fdomain.c [SCSI] fdomain: fix PCMCIA-related warnings 2007-05-27 12:59:28 -05:00
fdomain.h
FlashPoint.c
g_NCR5380_mmio.c
g_NCR5380.c [SCSI] NCR5380: fix NCR53C400_PSEUDO_DMA is not defined 2007-10-12 14:40:22 -04:00
g_NCR5380.h
gdth_ioctl.h
gdth_kcompat.h
gdth_proc.c
gdth_proc.h
gdth.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
gdth.h [SCSI] gdth: remove redundant PCI stuff 2007-07-31 10:36:30 -05:00
gvp11.c
gvp11.h
hosts.c [SCSI] add supported_mode and active_mode attributes to the host 2007-10-12 14:46:55 -04:00
hptiop.c [SCSI] hptiop: adding new firmware interface and more PCI device IDs 2007-10-12 14:46:40 -04:00
hptiop.h [SCSI] hptiop: adding new firmware interface and more PCI device IDs 2007-10-12 14:46:40 -04:00
ibmmca.c [SCSI] ibmmca: convert to use the data buffer accessors 2007-05-26 16:30:17 -05:00
ide-scsi.c drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzalloc 2007-08-01 23:46:45 +02:00
imm.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
imm.h
in2000.c
in2000.h
initio.c [SCSI] initio: convert to use the data buffer accessors 2007-05-26 19:13:27 -05:00
initio.h [SCSI] initio: Convert into a real Linux driver and update to modern style 2007-05-22 11:08:56 -05:00
ipr.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-15 16:51:54 -07:00
ipr.h
ips.c [SCSI] ips: warning fix 2007-10-12 14:40:14 -04:00
ips.h [SCSI] ips: remove kernel 2.4 code 2007-05-24 09:14:41 -05:00
iscsi_tcp.c [SCSI] iscsi_tcp: Turn off bounce buffers 2007-07-27 09:12:54 -04:00
iscsi_tcp.h [SCSI] iscsi_tcp: fix handling of data buffer padding 2007-06-02 15:35:10 -04:00
jazz_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
Kconfig [SCSI] fc_transport: add target driver support 2007-10-12 14:46:58 -04:00
lasi700.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
libiscsi.c [SCSI] libiscsi: fix cmd seqeunce number checking 2007-07-27 09:12:05 -04:00
libsrp.c [SCSI] tgt: convert libsrp and ibmvstgt to use srp_transport 2007-10-12 14:37:57 -04:00
mac53c94.c [SCSI] mac53c94: convert to use the data buffer accessors 2007-05-26 19:07:50 -05:00
mac53c94.h
mac_esp.c
mac_scsi.c
mac_scsi.h
Makefile [SCSI] add srp transport class 2007-10-12 14:37:35 -04:00
mca_53c9x.c
megaraid.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
megaraid.h
mesh.c [SCSI] mesh: convert to use the data buffer accessors 2007-06-07 08:49:10 -05:00
mesh.h
mvme16x_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
mvme147.c
mvme147.h
ncr53c8xx.c [SCSI] ncr53c8xx: convert to use the data buffer accessors 2007-07-15 10:03:03 -05:00
ncr53c8xx.h
NCR53c406a.c [SCSI] NCR53c406a: convert to use the data buffer accessors 2007-05-26 19:08:20 -05:00
NCR53C9x.c m68k: missing exports 2007-07-20 08:24:49 -07:00
NCR53C9x.h
NCR5380.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-15 16:51:54 -07:00
NCR5380.h [SCSI] ncr5380 warning fixes 2007-05-24 09:13:25 -05:00
NCR_D700.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
NCR_D700.h
NCR_Q720.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
NCR_Q720.h
nsp32_debug.c
nsp32_io.h
nsp32.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-15 16:51:54 -07:00
nsp32.h
oktagon_esp.c
oktagon_io.S
osst_detect.h
osst_options.h
osst.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
osst.h
pas16.c
pas16.h
pluto.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
pluto.h
ppa.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
ppa.h
ps3rom.c [SCSI] ps3rom: convert to use the data buffer accessors 2007-10-12 14:38:13 -04:00
psi240i.c
psi240i.h
psi_chip.h
ql1040_fw.h
ql1280_fw.h
ql12160_fw.h
qla1280.c
qla1280.h
qlogicfas408.c [SCSI] qlogicfas408: convert to use the data buffer accessors 2007-05-26 19:21:09 -05:00
qlogicfas408.h
qlogicfas.c
qlogicpti_asm.c
qlogicpti.c [SCSI] qlogicpti: Some cosmetic changes 2007-08-02 09:02:42 -05:00
qlogicpti.h
raid_class.c
script_asm.pl
scsi_debug.c [SCSI] Make scsi_host_template::proc_name const char * instead of char *. 2007-07-19 12:06:26 -05:00
scsi_debug.h
scsi_devinfo.c [SCSI] Add QUANTUM XP34301 to the blacklist 2007-10-12 14:39:19 -04:00
scsi_error.c [SCSI] scsi_error.c should #include "scsi_transport_api.h" 2007-10-12 14:40:18 -04:00
scsi_ioctl.c
scsi_lib_dma.c [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA 2007-07-14 19:28:10 -05:00
scsi_lib.c [SCSI] fix write buffer length in scsi_req_map_sg() 2007-10-12 14:38:17 -04:00
scsi_logging.h
scsi_module.c
scsi_netlink.c
scsi_priv.h
scsi_proc.c
scsi_sas_internal.h
scsi_scan.c [SCSI] Fix async scanning double-add problems 2007-10-12 14:38:24 -04:00
scsi_sysctl.c [SCSI] small cleanups 2007-07-18 11:16:32 -05:00
scsi_sysfs.c [SCSI] switch sdev sysfs attributes to default attributes 2007-10-12 14:48:22 -04:00
scsi_tgt_if.c [SCSI] tgt: add I_T nexus support 2007-10-12 14:37:50 -04:00
scsi_tgt_lib.c [SCSI] tgt: fix can_queue bug 2007-10-12 14:46:51 -04:00
scsi_tgt_priv.h [SCSI] tgt: add I_T nexus support 2007-10-12 14:37:50 -04:00
scsi_transport_api.h
scsi_transport_fc_internal.h [SCSI] fc_transport: add target driver support 2007-10-12 14:46:58 -04:00
scsi_transport_fc.c [SCSI] fc_transport: add target driver support 2007-10-12 14:46:58 -04:00
scsi_transport_iscsi.c [SCSI] iscsi class, iscsi_tcp, iser, qla4xxx: add netdevname sysfs attr 2007-06-02 15:38:04 -04:00
scsi_transport_sas.c [SCSI] bsg: make class backlinks 2007-07-21 08:58:23 -05:00
scsi_transport_spi.c
scsi_transport_srp_internal.h [SCSI] scsi_transport_srp: remove tgt dependencies 2007-10-12 14:38:09 -04:00
scsi_transport_srp.c [SCSI] srp_transport: convert to use supported_mode attribute 2007-10-12 14:47:02 -04:00
scsi_typedefs.h
scsi_wait_scan.c
scsi.c mm: Remove slab destructors from kmem_cache_create(). 2007-07-20 10:11:58 +09:00
scsi.h
scsicam.c
sd.c [SCSI] sd: disentangle barriers in SCSI 2007-08-04 08:37:04 -05:00
seagate.c [SCSI] seagate: make seagate_st0x_detect() static 2007-07-18 11:16:46 -05:00
sg.c [SCSI] sg: increase sglist_len of the sg_scatter_hold structure 2007-10-12 14:38:28 -04:00
sgiwd93.c
sim710.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-22 11:36:49 -07:00
sni_53c710.c [SCSI] sni_53c710: Cleanup 2007-07-14 19:12:15 -05:00
sr_ioctl.c
sr_vendor.c
sr.c [BLOCK] Get rid of request_queue_t typedef 2007-07-24 09:28:11 +02:00
sr.h
st_options.h
st.c [SCSI] st: Use mutex instead of semaphore 2007-07-31 10:44:01 -05:00
st.h [SCSI] st: Use mutex instead of semaphore 2007-07-31 10:44:01 -05:00
stex.c [SCSI] stex: use resid for xfer len information 2007-07-14 18:59:10 -05:00
sun3_NCR5380.c
sun3_scsi_vme.c
sun3_scsi.c
sun3_scsi.h
sun3x_esp.c
sun_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
sym53c416.c [SCSI] sym53c416: convert to use the data buffer accessors 2007-05-26 19:08:50 -05:00
sym53c416.h
t128.c
t128.h
tmscsim.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
tmscsim.h [SCSI] tmscsim: Further clean-up of the driver 2007-07-14 18:56:33 -05:00
u14-34f.c [SCSI] u14-34f: convert to use the data buffer accessors 2007-05-26 19:19:04 -05:00
ultrastor.c [SCSI] ultrastor: convert to use the data buffer accessors 2007-05-26 19:18:38 -05:00
ultrastor.h
wd33c93.c [SCSI] wd33c93: cleanups 2007-07-18 11:16:38 -05:00
wd33c93.h
wd7000.c [SCSI] wd7000: convert to use the data buffer accessors 2007-05-26 19:18:10 -05:00
zalon.c
zorro7xx.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00