c0b11b914d
Added support for Air2PC/AirStar 2 ATSC 3rd generation (HD5000) Signed-off-by: Taylor Jacob <rtjacob@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
560 lines
14 KiB
C
560 lines
14 KiB
C
/*
|
|
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
|
|
*
|
|
* flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
|
|
*
|
|
* see flexcop.c for copyright information.
|
|
*/
|
|
#include "flexcop.h"
|
|
|
|
#include "stv0299.h"
|
|
#include "mt352.h"
|
|
#include "nxt2002.h"
|
|
#include "bcm3510.h"
|
|
#include "stv0297.h"
|
|
#include "mt312.h"
|
|
#include "lgdt330x.h"
|
|
#include "dvb-pll.h"
|
|
|
|
/* lnb control */
|
|
|
|
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
flexcop_ibi_value v;
|
|
deb_tuner("polarity/voltage = %u\n", voltage);
|
|
|
|
v = fc->read_ibi_reg(fc, misc_204);
|
|
switch (voltage) {
|
|
case SEC_VOLTAGE_OFF:
|
|
v.misc_204.ACPI1_sig = 1;
|
|
break;
|
|
case SEC_VOLTAGE_13:
|
|
v.misc_204.ACPI1_sig = 0;
|
|
v.misc_204.LNB_L_H_sig = 0;
|
|
break;
|
|
case SEC_VOLTAGE_18:
|
|
v.misc_204.ACPI1_sig = 0;
|
|
v.misc_204.LNB_L_H_sig = 1;
|
|
break;
|
|
default:
|
|
err("unknown SEC_VOLTAGE value");
|
|
return -EINVAL;
|
|
}
|
|
return fc->write_ibi_reg(fc, misc_204, v);
|
|
}
|
|
|
|
static int flexcop_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
|
|
|
|
if (fc->fe_sleep)
|
|
return fc->fe_sleep(fe);
|
|
|
|
/* v.misc_204.ACPI3_sig = 1;
|
|
fc->write_ibi_reg(fc,misc_204,v);*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
|
|
{
|
|
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
flexcop_ibi_value v;
|
|
u16 ax;
|
|
v.raw = 0;
|
|
|
|
deb_tuner("tone = %u\n",tone);
|
|
|
|
switch (tone) {
|
|
case SEC_TONE_ON:
|
|
ax = 0x01ff;
|
|
break;
|
|
case SEC_TONE_OFF:
|
|
ax = 0;
|
|
break;
|
|
default:
|
|
err("unknown SEC_TONE value");
|
|
return -EINVAL;
|
|
}
|
|
|
|
v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
|
|
|
|
v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
|
|
v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
|
|
|
|
return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
|
|
}
|
|
|
|
static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
|
|
{
|
|
flexcop_set_tone(fe, SEC_TONE_ON);
|
|
udelay(data ? 500 : 1000);
|
|
flexcop_set_tone(fe, SEC_TONE_OFF);
|
|
udelay(data ? 1000 : 500);
|
|
}
|
|
|
|
static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
|
|
{
|
|
int i, par = 1, d;
|
|
|
|
for (i = 7; i >= 0; i--) {
|
|
d = (data >> i) & 1;
|
|
par ^= d;
|
|
flexcop_diseqc_send_bit(fe, d);
|
|
}
|
|
|
|
flexcop_diseqc_send_bit(fe, par);
|
|
}
|
|
|
|
static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
|
|
{
|
|
int i;
|
|
|
|
flexcop_set_tone(fe, SEC_TONE_OFF);
|
|
mdelay(16);
|
|
|
|
for (i = 0; i < len; i++)
|
|
flexcop_diseqc_send_byte(fe,msg[i]);
|
|
|
|
mdelay(16);
|
|
|
|
if (burst != -1) {
|
|
if (burst)
|
|
flexcop_diseqc_send_byte(fe, 0xff);
|
|
else {
|
|
flexcop_set_tone(fe, SEC_TONE_ON);
|
|
udelay(12500);
|
|
flexcop_set_tone(fe, SEC_TONE_OFF);
|
|
}
|
|
msleep(20);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
|
|
{
|
|
return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
|
|
}
|
|
|
|
static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
|
|
{
|
|
return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
|
|
}
|
|
|
|
/* dvb-s stv0299 */
|
|
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
|
|
{
|
|
u8 aclk = 0;
|
|
u8 bclk = 0;
|
|
|
|
if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
|
|
else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
|
|
else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
|
|
else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
|
|
else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
|
|
else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
|
|
|
|
stv0299_writereg (fe, 0x13, aclk);
|
|
stv0299_writereg (fe, 0x14, bclk);
|
|
stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
|
|
stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
|
|
stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
|
|
{
|
|
u8 buf[4];
|
|
u32 div;
|
|
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
|
|
|
|
div = params->frequency / 125;
|
|
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = div & 0xff;
|
|
buf[2] = 0x84; /* 0xC4 */
|
|
buf[3] = 0x08;
|
|
|
|
if (params->frequency < 1500000) buf[3] |= 0x10;
|
|
|
|
if (i2c_transfer(i2c, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static u8 samsung_tbmu24112_inittab[] = {
|
|
0x01, 0x15,
|
|
0x02, 0x30,
|
|
0x03, 0x00,
|
|
0x04, 0x7D,
|
|
0x05, 0x35,
|
|
0x06, 0x02,
|
|
0x07, 0x00,
|
|
0x08, 0xC3,
|
|
0x0C, 0x00,
|
|
0x0D, 0x81,
|
|
0x0E, 0x23,
|
|
0x0F, 0x12,
|
|
0x10, 0x7E,
|
|
0x11, 0x84,
|
|
0x12, 0xB9,
|
|
0x13, 0x88,
|
|
0x14, 0x89,
|
|
0x15, 0xC9,
|
|
0x16, 0x00,
|
|
0x17, 0x5C,
|
|
0x18, 0x00,
|
|
0x19, 0x00,
|
|
0x1A, 0x00,
|
|
0x1C, 0x00,
|
|
0x1D, 0x00,
|
|
0x1E, 0x00,
|
|
0x1F, 0x3A,
|
|
0x20, 0x2E,
|
|
0x21, 0x80,
|
|
0x22, 0xFF,
|
|
0x23, 0xC1,
|
|
0x28, 0x00,
|
|
0x29, 0x1E,
|
|
0x2A, 0x14,
|
|
0x2B, 0x0F,
|
|
0x2C, 0x09,
|
|
0x2D, 0x05,
|
|
0x31, 0x1F,
|
|
0x32, 0x19,
|
|
0x33, 0xFE,
|
|
0x34, 0x93,
|
|
0xff, 0xff,
|
|
};
|
|
|
|
static struct stv0299_config samsung_tbmu24112_config = {
|
|
.demod_address = 0x68,
|
|
.inittab = samsung_tbmu24112_inittab,
|
|
.mclk = 88000000UL,
|
|
.invert = 0,
|
|
.skip_reinit = 0,
|
|
.lock_output = STV0229_LOCKOUTPUT_LK,
|
|
.volt13_op0_op1 = STV0299_VOLT13_OP1,
|
|
.min_delay_ms = 100,
|
|
.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
|
|
.pll_set = samsung_tbmu24112_pll_set,
|
|
};
|
|
|
|
/* dvb-t mt352 */
|
|
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
|
|
{
|
|
static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
|
|
static u8 mt352_reset [] = { 0x50, 0x80 };
|
|
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
|
|
static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
|
|
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
|
|
|
|
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
|
|
udelay(2000);
|
|
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
|
|
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
|
|
|
|
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
|
|
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
|
|
{
|
|
u32 div;
|
|
unsigned char bs = 0;
|
|
|
|
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
|
|
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
|
|
|
|
if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
|
|
if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
|
|
if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
|
|
|
|
pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */
|
|
pllbuf[1] = div >> 8;
|
|
pllbuf[2] = div & 0xff;
|
|
pllbuf[3] = 0xcc;
|
|
pllbuf[4] = bs;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct mt352_config samsung_tdtc9251dh0_config = {
|
|
.demod_address = 0x0f,
|
|
.demod_init = samsung_tdtc9251dh0_demod_init,
|
|
.pll_set = samsung_tdtc9251dh0_pll_set,
|
|
};
|
|
|
|
static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
return request_firmware(fw, name, fc->dev);
|
|
}
|
|
|
|
static int lgdt3303_pll_set(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters* params)
|
|
{
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
u8 buf[4];
|
|
struct i2c_msg msg =
|
|
{ .addr = 0x61, .flags = 0, .buf = buf, .len = 4 };
|
|
int err;
|
|
|
|
dvb_pll_configure(&dvb_pll_tdvs_tua6034,buf, params->frequency, 0);
|
|
dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
__FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
|
|
if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "lgdt3303: %s error "
|
|
"(addr %02x <- %02x, err = %i)\n",
|
|
__FUNCTION__, buf[0], buf[1], err);
|
|
if (err < 0)
|
|
return err;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
buf[0] = 0x86 | 0x18;
|
|
buf[1] = 0x50;
|
|
msg.len = 2;
|
|
if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "lgdt3303: %s error "
|
|
"(addr %02x <- %02x, err = %i)\n",
|
|
__FUNCTION__, buf[0], buf[1], err);
|
|
if (err < 0)
|
|
return err;
|
|
else
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
|
|
.demod_address = 0x59,
|
|
.demod_chip = LGDT3303,
|
|
.serial_mpeg = 0x04,
|
|
.pll_set = lgdt3303_pll_set,
|
|
.clock_polarity_flip = 1,
|
|
};
|
|
|
|
static struct nxt2002_config samsung_tbmv_config = {
|
|
.demod_address = 0x0a,
|
|
.request_firmware = flexcop_fe_request_firmware,
|
|
};
|
|
|
|
static struct bcm3510_config air2pc_atsc_first_gen_config = {
|
|
.demod_address = 0x0f,
|
|
.request_firmware = flexcop_fe_request_firmware,
|
|
};
|
|
|
|
static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
|
|
{
|
|
u8 buf[4];
|
|
u32 div;
|
|
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
|
|
struct flexcop_device *fc = fe->dvb->priv;
|
|
|
|
div = (params->frequency + (125/2)) / 125;
|
|
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = (div >> 0) & 0xff;
|
|
buf[2] = 0x84 | ((div >> 10) & 0x60);
|
|
buf[3] = 0x80;
|
|
|
|
if (params->frequency < 1550000)
|
|
buf[3] |= 0x02;
|
|
|
|
if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static struct mt312_config skystar23_samsung_tbdu18132_config = {
|
|
|
|
.demod_address = 0x0e,
|
|
.pll_set = skystar23_samsung_tbdu18132_pll_set,
|
|
};
|
|
|
|
|
|
static u8 alps_tdee4_stv0297_inittab[] = {
|
|
0x80, 0x01,
|
|
0x80, 0x00,
|
|
0x81, 0x01,
|
|
0x81, 0x00,
|
|
0x00, 0x09,
|
|
0x01, 0x69,
|
|
0x03, 0x00,
|
|
0x04, 0x00,
|
|
0x07, 0x00,
|
|
0x08, 0x00,
|
|
0x20, 0x00,
|
|
0x21, 0x40,
|
|
0x22, 0x00,
|
|
0x23, 0x00,
|
|
0x24, 0x40,
|
|
0x25, 0x88,
|
|
0x30, 0xff,
|
|
0x31, 0x00,
|
|
0x32, 0xff,
|
|
0x33, 0x00,
|
|
0x34, 0x50,
|
|
0x35, 0x7f,
|
|
0x36, 0x00,
|
|
0x37, 0x20,
|
|
0x38, 0x00,
|
|
0x40, 0x1c,
|
|
0x41, 0xff,
|
|
0x42, 0x29,
|
|
0x43, 0x00,
|
|
0x44, 0xff,
|
|
0x45, 0x00,
|
|
0x46, 0x00,
|
|
0x49, 0x04,
|
|
0x4a, 0x00,
|
|
0x4b, 0xf8,
|
|
0x52, 0x30,
|
|
0x55, 0xae,
|
|
0x56, 0x47,
|
|
0x57, 0xe1,
|
|
0x58, 0x3a,
|
|
0x5a, 0x1e,
|
|
0x5b, 0x34,
|
|
0x60, 0x00,
|
|
0x63, 0x00,
|
|
0x64, 0x00,
|
|
0x65, 0x00,
|
|
0x66, 0x00,
|
|
0x67, 0x00,
|
|
0x68, 0x00,
|
|
0x69, 0x00,
|
|
0x6a, 0x02,
|
|
0x6b, 0x00,
|
|
0x70, 0xff,
|
|
0x71, 0x00,
|
|
0x72, 0x00,
|
|
0x73, 0x00,
|
|
0x74, 0x0c,
|
|
0x80, 0x00,
|
|
0x81, 0x00,
|
|
0x82, 0x00,
|
|
0x83, 0x00,
|
|
0x84, 0x04,
|
|
0x85, 0x80,
|
|
0x86, 0x24,
|
|
0x87, 0x78,
|
|
0x88, 0x10,
|
|
0x89, 0x00,
|
|
0x90, 0x01,
|
|
0x91, 0x01,
|
|
0xa0, 0x04,
|
|
0xa1, 0x00,
|
|
0xa2, 0x00,
|
|
0xb0, 0x91,
|
|
0xb1, 0x0b,
|
|
0xc0, 0x53,
|
|
0xc1, 0x70,
|
|
0xc2, 0x12,
|
|
0xd0, 0x00,
|
|
0xd1, 0x00,
|
|
0xd2, 0x00,
|
|
0xd3, 0x00,
|
|
0xd4, 0x00,
|
|
0xd5, 0x00,
|
|
0xde, 0x00,
|
|
0xdf, 0x00,
|
|
0x61, 0x49,
|
|
0x62, 0x0b,
|
|
0x53, 0x08,
|
|
0x59, 0x08,
|
|
0xff, 0xff,
|
|
};
|
|
|
|
static struct stv0297_config alps_tdee4_stv0297_config = {
|
|
.demod_address = 0x1c,
|
|
.inittab = alps_tdee4_stv0297_inittab,
|
|
// .invert = 1,
|
|
// .pll_set = alps_tdee4_stv0297_pll_set,
|
|
};
|
|
|
|
/* try to figure out the frontend, each card/box can have on of the following list */
|
|
int flexcop_frontend_init(struct flexcop_device *fc)
|
|
{
|
|
/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
|
|
if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
|
|
fc->fe->ops->set_voltage = flexcop_set_voltage;
|
|
|
|
fc->fe_sleep = fc->fe->ops->sleep;
|
|
fc->fe->ops->sleep = flexcop_sleep;
|
|
|
|
fc->dev_type = FC_SKY;
|
|
info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
|
|
} else
|
|
/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
|
|
if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
|
|
fc->dev_type = FC_AIR_DVB;
|
|
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
|
|
} else
|
|
/* try the air atsc 2nd generation (nxt2002) */
|
|
if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
|
|
fc->dev_type = FC_AIR_ATSC2;
|
|
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
|
|
} else
|
|
/* try the air atsc 3nd generation (lgdt3303) */
|
|
if ((fc->fe = lgdt330x_attach(&air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
|
|
fc->dev_type = FC_AIR_ATSC3;
|
|
info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
|
|
} else
|
|
/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
|
|
if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
|
|
fc->dev_type = FC_AIR_ATSC1;
|
|
info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
|
|
} else
|
|
/* try the cable dvb (stv0297) */
|
|
if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) {
|
|
fc->dev_type = FC_CABLE;
|
|
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
|
|
} else
|
|
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
|
|
if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
|
|
fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
|
|
fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst;
|
|
fc->fe->ops->set_tone = flexcop_set_tone;
|
|
fc->fe->ops->set_voltage = flexcop_set_voltage;
|
|
|
|
fc->fe_sleep = fc->fe->ops->sleep;
|
|
fc->fe->ops->sleep = flexcop_sleep;
|
|
|
|
fc->dev_type = FC_SKY_OLD;
|
|
info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
|
|
}
|
|
|
|
if (fc->fe == NULL) {
|
|
err("no frontend driver found for this B2C2/FlexCop adapter");
|
|
return -ENODEV;
|
|
} else {
|
|
if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
|
|
err("frontend registration failed!");
|
|
if (fc->fe->ops->release != NULL)
|
|
fc->fe->ops->release(fc->fe);
|
|
fc->fe = NULL;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
fc->init_state |= FC_STATE_FE_INIT;
|
|
return 0;
|
|
}
|
|
|
|
void flexcop_frontend_exit(struct flexcop_device *fc)
|
|
{
|
|
if (fc->init_state & FC_STATE_FE_INIT)
|
|
dvb_unregister_frontend(fc->fe);
|
|
|
|
fc->init_state &= ~FC_STATE_FE_INIT;
|
|
}
|