82c583e3ae
Patch from Andrew Victor These headers define the registers and bits for the SPI (Serial Peripheral Interface), SSC (Synchronous Serial), TC (Timer/Counter) and UDP (USB Device) peripherals integrated in the AT91RM9200 processor. (They will probably also be usable for the AT91SAM9 series of SoC processors) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
78 lines
3.5 KiB
C
78 lines
3.5 KiB
C
/*
|
|
* include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
|
|
*
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) SAN People
|
|
*
|
|
* USB Device Port (UDP) registers.
|
|
* Based on AT91RM9200 datasheet revision E.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef AT91RM9200_UDP_H
|
|
#define AT91RM9200_UDP_H
|
|
|
|
#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */
|
|
#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */
|
|
#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */
|
|
#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */
|
|
|
|
#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */
|
|
#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */
|
|
#define AT91_UDP_CONFG (1 << 1) /* Configured */
|
|
#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */
|
|
#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */
|
|
#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */
|
|
|
|
#define AT91_UDP_FADDR 0x08 /* Function Address Register */
|
|
#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */
|
|
#define AT91_UDP_FEN (1 << 8) /* Function Enable */
|
|
|
|
#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */
|
|
#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */
|
|
#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */
|
|
|
|
#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
|
|
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
|
|
#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
|
|
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
|
|
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
|
|
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
|
|
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
|
|
#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
|
|
|
|
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
|
|
#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
|
|
|
|
#define AT91_UDP_CSR(n) (0x30 + ((n) * 4)) /* Endpoint Control/Status Registers 0-7 */
|
|
#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */
|
|
#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */
|
|
#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */
|
|
#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */
|
|
#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */
|
|
#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */
|
|
#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */
|
|
#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */
|
|
#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */
|
|
#define AT91_UDP_EPTYPE_CTRL (0 << 8)
|
|
#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8)
|
|
#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8)
|
|
#define AT91_UDP_EPTYPE_INT_OUT (3 << 8)
|
|
#define AT91_UDP_EPTYPE_ISO_IN (5 << 8)
|
|
#define AT91_UDP_EPTYPE_BULK_IN (6 << 8)
|
|
#define AT91_UDP_EPTYPE_INT_IN (7 << 8)
|
|
#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */
|
|
#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */
|
|
#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */
|
|
|
|
#define AT91_UDP_FDR(n) (0x50 + ((n) * 4)) /* Endpoint FIFO Data Registers 0-7 */
|
|
|
|
#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
|
|
#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
|
|
|
|
#endif
|