android_kernel_xiaomi_sm8350/arch/sh/kernel/setup.c
Jon Smirl 894673ee61 [PATCH] tty: Remove include of screen_info.h from tty.h
screen_info.h doesn't have anything to do with the tty layer and shouldn't be
included by tty.h.  This patches removes the include and modifies all users to
directly include screen_info.h.  struct screen_info is mainly used to
communicate with the console drivers in drivers/video/console.  Note that this
patch touches every arch and I have no way of testing it.  If there is a
mistake the worst thing that will happen is a compile error.

[akpm@osdl.org: fix arm build]
[akpm@osdl.org: fix alpha build]
Signed-off-by: Jon Smirl <jonsmir@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00

621 lines
15 KiB
C

/* $Id: setup.c,v 1.30 2003/10/13 07:21:19 lethal Exp $
*
* linux/arch/sh/kernel/setup.c
*
* Copyright (C) 1999 Niibe Yutaka
* Copyright (C) 2002, 2003 Paul Mundt
*/
/*
* This file handles the architecture-dependent parts of initialization
*/
#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/console.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/utsname.h>
#include <linux/cpu.h>
#include <linux/pfn.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/clock.h>
#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
static int kgdb_parse_options(char *options);
#endif
extern void * __rd_start, * __rd_end;
/*
* Machine setup..
*/
/*
* Initialize loops_per_jiffy as 10000000 (1000MIPS).
* This value will be used at the very early stage of serial setup.
* The bigger value means no problem.
*/
struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
struct screen_info screen_info;
#if defined(CONFIG_SH_UNKNOWN)
struct sh_machine_vector sh_mv;
#endif
/* We need this to satisfy some external references. */
struct screen_info screen_info = {
0, 25, /* orig-x, orig-y */
0, /* unused */
0, /* orig-video-page */
0, /* orig-video-mode */
80, /* orig-video-cols */
0,0,0, /* ega_ax, ega_bx, ega_cx */
25, /* orig-video-lines */
0, /* orig-video-isVGA */
16 /* orig-video-points */
};
extern void platform_setup(void);
extern char *get_system_type(void);
extern int root_mountflags;
#define MV_NAME_SIZE 32
static struct sh_machine_vector* __init get_mv_byname(const char* name);
/*
* This is set up by the setup-routine at boot-time
*/
#define PARAM ((unsigned char *)empty_zero_page)
#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
#define INITRD_START (*(unsigned long *) (PARAM+0x010))
#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
/* ... */
#define COMMAND_LINE ((char *) (PARAM+0x100))
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
static char command_line[COMMAND_LINE_SIZE] = { 0, };
struct resource standard_io_resources[] = {
{ "dma1", 0x00, 0x1f },
{ "pic1", 0x20, 0x3f },
{ "timer", 0x40, 0x5f },
{ "keyboard", 0x60, 0x6f },
{ "dma page reg", 0x80, 0x8f },
{ "pic2", 0xa0, 0xbf },
{ "dma2", 0xc0, 0xdf },
{ "fpu", 0xf0, 0xff }
};
#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
/* System RAM - interrupted by the 640kB-1M hole */
#define code_resource (ram_resources[3])
#define data_resource (ram_resources[4])
static struct resource ram_resources[] = {
{ "System RAM", 0x000000, 0x09ffff, IORESOURCE_BUSY },
{ "System RAM", 0x100000, 0x100000, IORESOURCE_BUSY },
{ "Video RAM area", 0x0a0000, 0x0bffff },
{ "Kernel code", 0x100000, 0 },
{ "Kernel data", 0, 0 }
};
unsigned long memory_start, memory_end;
static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
struct sh_machine_vector** mvp,
unsigned long *mv_io_base,
int *mv_mmio_enable)
{
char c = ' ', *to = command_line, *from = COMMAND_LINE;
int len = 0;
/* Save unparsed command line copy for /proc/cmdline */
memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
memory_end = memory_start + __MEMORY_SIZE;
for (;;) {
/*
* "mem=XXX[kKmM]" defines a size of memory.
*/
if (c == ' ' && !memcmp(from, "mem=", 4)) {
if (to != command_line)
to--;
{
unsigned long mem_size;
mem_size = memparse(from+4, &from);
memory_end = memory_start + mem_size;
}
}
if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
char* mv_end;
char* mv_comma;
int mv_len;
if (to != command_line)
to--;
from += 6;
mv_end = strchr(from, ' ');
if (mv_end == NULL)
mv_end = from + strlen(from);
mv_comma = strchr(from, ',');
if ((mv_comma != NULL) && (mv_comma < mv_end)) {
int ints[3];
get_options(mv_comma+1, ARRAY_SIZE(ints), ints);
*mv_io_base = ints[1];
*mv_mmio_enable = ints[2];
mv_len = mv_comma - from;
} else {
mv_len = mv_end - from;
}
if (mv_len > (MV_NAME_SIZE-1))
mv_len = MV_NAME_SIZE-1;
memcpy(mv_name, from, mv_len);
mv_name[mv_len] = '\0';
from = mv_end;
*mvp = get_mv_byname(mv_name);
}
c = *(from++);
if (!c)
break;
if (COMMAND_LINE_SIZE <= ++len)
break;
*(to++) = c;
}
*to = '\0';
*cmdline_p = command_line;
}
static int __init sh_mv_setup(char **cmdline_p)
{
#ifdef CONFIG_SH_UNKNOWN
extern struct sh_machine_vector mv_unknown;
#endif
struct sh_machine_vector *mv = NULL;
char mv_name[MV_NAME_SIZE] = "";
unsigned long mv_io_base = 0;
int mv_mmio_enable = 0;
parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable);
#ifdef CONFIG_SH_UNKNOWN
if (mv == NULL) {
mv = &mv_unknown;
if (*mv_name != '\0') {
printk("Warning: Unsupported machine %s, using unknown\n",
mv_name);
}
}
sh_mv = *mv;
#endif
/*
* Manually walk the vec, fill in anything that the board hasn't yet
* by hand, wrapping to the generic implementation.
*/
#define mv_set(elem) do { \
if (!sh_mv.mv_##elem) \
sh_mv.mv_##elem = generic_##elem; \
} while (0)
mv_set(inb); mv_set(inw); mv_set(inl);
mv_set(outb); mv_set(outw); mv_set(outl);
mv_set(inb_p); mv_set(inw_p); mv_set(inl_p);
mv_set(outb_p); mv_set(outw_p); mv_set(outl_p);
mv_set(insb); mv_set(insw); mv_set(insl);
mv_set(outsb); mv_set(outsw); mv_set(outsl);
mv_set(readb); mv_set(readw); mv_set(readl);
mv_set(writeb); mv_set(writew); mv_set(writel);
mv_set(ioport_map);
mv_set(ioport_unmap);
mv_set(irq_demux);
#ifdef CONFIG_SH_UNKNOWN
__set_io_port_base(mv_io_base);
#endif
return 0;
}
void __init setup_arch(char **cmdline_p)
{
unsigned long bootmap_size;
unsigned long start_pfn, max_pfn, max_low_pfn;
#ifdef CONFIG_EARLY_PRINTK
extern void enable_early_printk(void);
enable_early_printk();
#endif
#ifdef CONFIG_CMDLINE_BOOL
strcpy(COMMAND_LINE, CONFIG_CMDLINE);
#endif
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
#endif
if (!MOUNT_ROOT_RDONLY)
root_mountflags &= ~MS_RDONLY;
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) _end;
code_resource.start = (unsigned long)virt_to_phys(_text);
code_resource.end = (unsigned long)virt_to_phys(_etext)-1;
data_resource.start = (unsigned long)virt_to_phys(_etext);
data_resource.end = (unsigned long)virt_to_phys(_edata)-1;
sh_mv_setup(cmdline_p);
/*
* Find the highest page frame number we have available
*/
max_pfn = PFN_DOWN(__pa(memory_end));
/*
* Determine low and high memory ranges:
*/
max_low_pfn = max_pfn;
/*
* Partially used pages are not usable - thus
* we are rounding upwards:
*/
start_pfn = PFN_UP(__pa(_end));
/*
* Find a proper area for the bootmem bitmap. After this
* bootstrap step all allocations (until the page allocator
* is intact) must be done via bootmem_alloc().
*/
bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
__MEMORY_START>>PAGE_SHIFT,
max_low_pfn);
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
{
unsigned long curr_pfn, last_pfn, pages;
/*
* We are rounding up the start address of usable memory:
*/
curr_pfn = PFN_UP(__MEMORY_START);
/*
* ... and at the end of the usable range downwards:
*/
last_pfn = PFN_DOWN(__pa(memory_end));
if (last_pfn > max_low_pfn)
last_pfn = max_low_pfn;
pages = last_pfn - curr_pfn;
free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
PFN_PHYS(pages));
}
/*
* Reserve the kernel text and
* Reserve the bootmem bitmap. We do this in two steps (first step
* was init_bootmem()), because this catches the (definitely buggy)
* case of us accidentally initializing the bootmem allocator with
* an invalid RAM area.
*/
reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE,
(PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
* enabling clean reboots, SMP operation, laptop functions.
*/
reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);
#ifdef CONFIG_BLK_DEV_INITRD
ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
if (&__rd_start != &__rd_end) {
LOADER_TYPE = 1;
INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START;
INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start;
}
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
reserve_bootmem_node(NODE_DATA(0), INITRD_START+__MEMORY_START, INITRD_SIZE);
initrd_start =
INITRD_START ? INITRD_START + PAGE_OFFSET + __MEMORY_START : 0;
initrd_end = initrd_start + INITRD_SIZE;
} else {
printk("initrd extends beyond end of memory "
"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
INITRD_START + INITRD_SIZE,
max_low_pfn << PAGE_SHIFT);
initrd_start = 0;
}
}
#endif
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
/* Perform the machine specific initialisation */
platform_setup();
paging_init();
}
struct sh_machine_vector* __init get_mv_byname(const char* name)
{
extern int strcasecmp(const char *, const char *);
extern long __machvec_start, __machvec_end;
struct sh_machine_vector *all_vecs =
(struct sh_machine_vector *)&__machvec_start;
int i, n = ((unsigned long)&__machvec_end
- (unsigned long)&__machvec_start)/
sizeof(struct sh_machine_vector);
for (i = 0; i < n; ++i) {
struct sh_machine_vector *mv = &all_vecs[i];
if (mv == NULL)
continue;
if (strcasecmp(name, get_system_type()) == 0) {
return mv;
}
}
return NULL;
}
static struct cpu cpu[NR_CPUS];
static int __init topology_init(void)
{
int cpu_id;
for_each_possible_cpu(cpu_id)
register_cpu(&cpu[cpu_id], cpu_id);
return 0;
}
subsys_initcall(topology_init);
static const char *cpu_name[] = {
[CPU_SH7604] = "SH7604",
[CPU_SH7705] = "SH7705",
[CPU_SH7708] = "SH7708",
[CPU_SH7729] = "SH7729",
[CPU_SH7300] = "SH7300",
[CPU_SH7750] = "SH7750",
[CPU_SH7750S] = "SH7750S",
[CPU_SH7750R] = "SH7750R",
[CPU_SH7751] = "SH7751",
[CPU_SH7751R] = "SH7751R",
[CPU_SH7760] = "SH7760",
[CPU_SH73180] = "SH73180",
[CPU_ST40RA] = "ST40RA",
[CPU_ST40GX1] = "ST40GX1",
[CPU_SH4_202] = "SH4-202",
[CPU_SH4_501] = "SH4-501",
[CPU_SH7770] = "SH7770",
[CPU_SH7780] = "SH7780",
[CPU_SH7781] = "SH7781",
[CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(void)
{
return cpu_name[boot_cpu_data.type];
}
#ifdef CONFIG_PROC_FS
static const char *cpu_flags[] = {
"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", "ptea", NULL
};
static void show_cpuflags(struct seq_file *m)
{
unsigned long i;
seq_printf(m, "cpu flags\t:");
if (!cpu_data->flags) {
seq_printf(m, " %s\n", cpu_flags[0]);
return;
}
for (i = 0; cpu_flags[i]; i++)
if ((cpu_data->flags & (1 << i)))
seq_printf(m, " %s", cpu_flags[i+1]);
seq_printf(m, "\n");
}
static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_info info)
{
unsigned int cache_size;
cache_size = info.ways * info.sets * info.linesz;
seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
type, cache_size >> 10, info.ways);
}
/*
* Get CPU information for use by the procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
unsigned int cpu = smp_processor_id();
if (!cpu && cpu_online(cpu))
seq_printf(m, "machine\t\t: %s\n", get_system_type());
seq_printf(m, "processor\t: %d\n", cpu);
seq_printf(m, "cpu family\t: %s\n", system_utsname.machine);
seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype());
show_cpuflags(m);
seq_printf(m, "cache type\t: ");
/*
* Check for what type of cache we have, we support both the
* unified cache on the SH-2 and SH-3, as well as the harvard
* style cache on the SH-4.
*/
if (test_bit(SH_CACHE_COMBINED, &(boot_cpu_data.icache.flags))) {
seq_printf(m, "unified\n");
show_cacheinfo(m, "cache", boot_cpu_data.icache);
} else {
seq_printf(m, "split (harvard)\n");
show_cacheinfo(m, "icache", boot_cpu_data.icache);
show_cacheinfo(m, "dcache", boot_cpu_data.dcache);
}
seq_printf(m, "bogomips\t: %lu.%02lu\n",
boot_cpu_data.loops_per_jiffy/(500000/HZ),
(boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100);
return show_clocks(m);
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? cpu_data + *pos : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_SH_KGDB
/*
* Parse command-line kgdb options. By default KGDB is enabled,
* entered on error (or other action) using default serial info.
* The command-line option can include a serial port specification
* and an action to override default or configured behavior.
*/
struct kgdb_sermap kgdb_sci_sermap =
{ "ttySC", 5, kgdb_sci_setup, NULL };
struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap;
struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap;
void kgdb_register_sermap(struct kgdb_sermap *map)
{
struct kgdb_sermap *last;
for (last = kgdb_serlist; last->next; last = last->next)
;
last->next = map;
if (!map->namelen) {
map->namelen = strlen(map->name);
}
}
static int __init kgdb_parse_options(char *options)
{
char c;
int baud;
/* Check for port spec (or use default) */
/* Determine port type and instance */
if (!memcmp(options, "tty", 3)) {
struct kgdb_sermap *map = kgdb_serlist;
while (map && memcmp(options, map->name, map->namelen))
map = map->next;
if (!map) {
KGDB_PRINTK("unknown port spec in %s\n", options);
return -1;
}
kgdb_porttype = map;
kgdb_serial_setup = map->setup_fn;
kgdb_portnum = options[map->namelen] - '0';
options += map->namelen + 1;
options = (*options == ',') ? options+1 : options;
/* Read optional parameters (baud/parity/bits) */
baud = simple_strtoul(options, &options, 10);
if (baud != 0) {
kgdb_baud = baud;
c = toupper(*options);
if (c == 'E' || c == 'O' || c == 'N') {
kgdb_parity = c;
options++;
}
c = *options;
if (c == '7' || c == '8') {
kgdb_bits = c;
options++;
}
options = (*options == ',') ? options+1 : options;
}
}
/* Check for action specification */
if (!memcmp(options, "halt", 4)) {
kgdb_halt = 1;
options += 4;
} else if (!memcmp(options, "disabled", 8)) {
kgdb_enabled = 0;
options += 8;
}
if (*options) {
KGDB_PRINTK("ignored unknown options: %s\n", options);
return 0;
}
return 1;
}
__setup("kgdb=", kgdb_parse_options);
#endif /* CONFIG_SH_KGDB */