cead4dbc03
We all inherited the same error from the original NAND board driver which got copied and changed. Fix them all at once... Signed-off-by: David Woodhouse <dwmw2@infradead.org>
502 lines
11 KiB
C
502 lines
11 KiB
C
/*
|
|
* drivers/mtd/nand/au1550nd.c
|
|
*
|
|
* Copyright (C) 2004 Embedded Edge, LLC
|
|
*
|
|
* $Id: au1550nd.c,v 1.13 2005/11/07 11:14:30 gleixner Exp $
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/version.h>
|
|
#include <asm/io.h>
|
|
|
|
/* fixme: this is ugly */
|
|
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
|
|
#include <asm/mach-au1x00/au1xxx.h>
|
|
#else
|
|
#include <asm/au1000.h>
|
|
#ifdef CONFIG_MIPS_PB1550
|
|
#include <asm/pb1550.h>
|
|
#endif
|
|
#ifdef CONFIG_MIPS_DB1550
|
|
#include <asm/db1x00.h>
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* MTD structure for NAND controller
|
|
*/
|
|
static struct mtd_info *au1550_mtd = NULL;
|
|
static void __iomem *p_nand;
|
|
static int nand_width = 1; /* default x8 */
|
|
|
|
/*
|
|
* Define partitions for flash device
|
|
*/
|
|
static const struct mtd_partition partition_info[] = {
|
|
{
|
|
.name = "NAND FS 0",
|
|
.offset = 0,
|
|
.size = 8 * 1024 * 1024},
|
|
{
|
|
.name = "NAND FS 1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL}
|
|
};
|
|
|
|
/**
|
|
* au_read_byte - read one byte from the chip
|
|
* @mtd: MTD device structure
|
|
*
|
|
* read function for 8bit buswith
|
|
*/
|
|
static u_char au_read_byte(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
u_char ret = readb(this->IO_ADDR_R);
|
|
au_sync();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* au_write_byte - write one byte to the chip
|
|
* @mtd: MTD device structure
|
|
* @byte: pointer to data byte to write
|
|
*
|
|
* write function for 8it buswith
|
|
*/
|
|
static void au_write_byte(struct mtd_info *mtd, u_char byte)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
writeb(byte, this->IO_ADDR_W);
|
|
au_sync();
|
|
}
|
|
|
|
/**
|
|
* au_read_byte16 - read one byte endianess aware from the chip
|
|
* @mtd: MTD device structure
|
|
*
|
|
* read function for 16bit buswith with
|
|
* endianess conversion
|
|
*/
|
|
static u_char au_read_byte16(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
u_char ret = (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
|
|
au_sync();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* au_write_byte16 - write one byte endianess aware to the chip
|
|
* @mtd: MTD device structure
|
|
* @byte: pointer to data byte to write
|
|
*
|
|
* write function for 16bit buswith with
|
|
* endianess conversion
|
|
*/
|
|
static void au_write_byte16(struct mtd_info *mtd, u_char byte)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
|
|
au_sync();
|
|
}
|
|
|
|
/**
|
|
* au_read_word - read one word from the chip
|
|
* @mtd: MTD device structure
|
|
*
|
|
* read function for 16bit buswith without
|
|
* endianess conversion
|
|
*/
|
|
static u16 au_read_word(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
u16 ret = readw(this->IO_ADDR_R);
|
|
au_sync();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* au_write_word - write one word to the chip
|
|
* @mtd: MTD device structure
|
|
* @word: data word to write
|
|
*
|
|
* write function for 16bit buswith without
|
|
* endianess conversion
|
|
*/
|
|
static void au_write_word(struct mtd_info *mtd, u16 word)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
writew(word, this->IO_ADDR_W);
|
|
au_sync();
|
|
}
|
|
|
|
/**
|
|
* au_write_buf - write buffer to chip
|
|
* @mtd: MTD device structure
|
|
* @buf: data buffer
|
|
* @len: number of bytes to write
|
|
*
|
|
* write function for 8bit buswith
|
|
*/
|
|
static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
writeb(buf[i], this->IO_ADDR_W);
|
|
au_sync();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* au_read_buf - read chip data into buffer
|
|
* @mtd: MTD device structure
|
|
* @buf: buffer to store date
|
|
* @len: number of bytes to read
|
|
*
|
|
* read function for 8bit buswith
|
|
*/
|
|
static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
buf[i] = readb(this->IO_ADDR_R);
|
|
au_sync();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* au_verify_buf - Verify chip data against buffer
|
|
* @mtd: MTD device structure
|
|
* @buf: buffer containing the data to compare
|
|
* @len: number of bytes to compare
|
|
*
|
|
* verify function for 8bit buswith
|
|
*/
|
|
static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (buf[i] != readb(this->IO_ADDR_R))
|
|
return -EFAULT;
|
|
au_sync();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* au_write_buf16 - write buffer to chip
|
|
* @mtd: MTD device structure
|
|
* @buf: data buffer
|
|
* @len: number of bytes to write
|
|
*
|
|
* write function for 16bit buswith
|
|
*/
|
|
static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
u16 *p = (u16 *) buf;
|
|
len >>= 1;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
writew(p[i], this->IO_ADDR_W);
|
|
au_sync();
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* au_read_buf16 - read chip data into buffer
|
|
* @mtd: MTD device structure
|
|
* @buf: buffer to store date
|
|
* @len: number of bytes to read
|
|
*
|
|
* read function for 16bit buswith
|
|
*/
|
|
static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
u16 *p = (u16 *) buf;
|
|
len >>= 1;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
p[i] = readw(this->IO_ADDR_R);
|
|
au_sync();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* au_verify_buf16 - Verify chip data against buffer
|
|
* @mtd: MTD device structure
|
|
* @buf: buffer containing the data to compare
|
|
* @len: number of bytes to compare
|
|
*
|
|
* verify function for 16bit buswith
|
|
*/
|
|
static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
|
|
{
|
|
int i;
|
|
struct nand_chip *this = mtd->priv;
|
|
u16 *p = (u16 *) buf;
|
|
len >>= 1;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (p[i] != readw(this->IO_ADDR_R))
|
|
return -EFAULT;
|
|
au_sync();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
|
|
{
|
|
register struct nand_chip *this = mtd->priv;
|
|
|
|
switch (cmd) {
|
|
|
|
case NAND_CTL_SETCLE:
|
|
this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
|
|
break;
|
|
|
|
case NAND_CTL_CLRCLE:
|
|
this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
|
|
break;
|
|
|
|
case NAND_CTL_SETALE:
|
|
this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
|
|
break;
|
|
|
|
case NAND_CTL_CLRALE:
|
|
this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
|
|
/* FIXME: Nobody knows why this is necessary,
|
|
* but it works only that way */
|
|
udelay(1);
|
|
break;
|
|
|
|
case NAND_CTL_SETNCE:
|
|
/* assert (force assert) chip enable */
|
|
au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
|
|
break;
|
|
|
|
case NAND_CTL_CLRNCE:
|
|
/* deassert chip enable */
|
|
au_writel(0, MEM_STNDCTL);
|
|
break;
|
|
}
|
|
|
|
this->IO_ADDR_R = this->IO_ADDR_W;
|
|
|
|
/* Drain the writebuffer */
|
|
au_sync();
|
|
}
|
|
|
|
int au1550_device_ready(struct mtd_info *mtd)
|
|
{
|
|
int ret = (au_readl(MEM_STSTAT) & 0x1) ? 1 : 0;
|
|
au_sync();
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Main initialization routine
|
|
*/
|
|
static int __init au1xxx_nand_init(void)
|
|
{
|
|
struct nand_chip *this;
|
|
u16 boot_swapboot = 0; /* default value */
|
|
int retval;
|
|
u32 mem_staddr;
|
|
u32 nand_phys;
|
|
|
|
/* Allocate memory for MTD device structure and private data */
|
|
au1550_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
|
|
if (!au1550_mtd) {
|
|
printk("Unable to allocate NAND MTD dev structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get pointer to private data */
|
|
this = (struct nand_chip *)(&au1550_mtd[1]);
|
|
|
|
/* Initialize structures */
|
|
memset(au1550_mtd, 0, sizeof(struct mtd_info));
|
|
memset(this, 0, sizeof(struct nand_chip));
|
|
|
|
/* Link the private data with the MTD structure */
|
|
au1550_mtd->priv = this;
|
|
au1550_mtd->owner = THIS_MODULE;
|
|
|
|
/* disable interrupts */
|
|
au_writel(au_readl(MEM_STNDCTL) & ~(1 << 8), MEM_STNDCTL);
|
|
|
|
/* disable NAND boot */
|
|
au_writel(au_readl(MEM_STNDCTL) & ~(1 << 0), MEM_STNDCTL);
|
|
|
|
#ifdef CONFIG_MIPS_PB1550
|
|
/* set gpio206 high */
|
|
au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
|
|
|
|
boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
|
|
switch (boot_swapboot) {
|
|
case 0:
|
|
case 2:
|
|
case 8:
|
|
case 0xC:
|
|
case 0xD:
|
|
/* x16 NAND Flash */
|
|
nand_width = 0;
|
|
break;
|
|
case 1:
|
|
case 9:
|
|
case 3:
|
|
case 0xE:
|
|
case 0xF:
|
|
/* x8 NAND Flash */
|
|
nand_width = 1;
|
|
break;
|
|
default:
|
|
printk("Pb1550 NAND: bad boot:swap\n");
|
|
retval = -EINVAL;
|
|
goto outmem;
|
|
}
|
|
#endif
|
|
|
|
/* Configure chip-select; normally done by boot code, e.g. YAMON */
|
|
#ifdef NAND_STCFG
|
|
if (NAND_CS == 0) {
|
|
au_writel(NAND_STCFG, MEM_STCFG0);
|
|
au_writel(NAND_STTIME, MEM_STTIME0);
|
|
au_writel(NAND_STADDR, MEM_STADDR0);
|
|
}
|
|
if (NAND_CS == 1) {
|
|
au_writel(NAND_STCFG, MEM_STCFG1);
|
|
au_writel(NAND_STTIME, MEM_STTIME1);
|
|
au_writel(NAND_STADDR, MEM_STADDR1);
|
|
}
|
|
if (NAND_CS == 2) {
|
|
au_writel(NAND_STCFG, MEM_STCFG2);
|
|
au_writel(NAND_STTIME, MEM_STTIME2);
|
|
au_writel(NAND_STADDR, MEM_STADDR2);
|
|
}
|
|
if (NAND_CS == 3) {
|
|
au_writel(NAND_STCFG, MEM_STCFG3);
|
|
au_writel(NAND_STTIME, MEM_STTIME3);
|
|
au_writel(NAND_STADDR, MEM_STADDR3);
|
|
}
|
|
#endif
|
|
|
|
/* Locate NAND chip-select in order to determine NAND phys address */
|
|
mem_staddr = 0x00000000;
|
|
if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
|
|
mem_staddr = au_readl(MEM_STADDR0);
|
|
else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
|
|
mem_staddr = au_readl(MEM_STADDR1);
|
|
else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
|
|
mem_staddr = au_readl(MEM_STADDR2);
|
|
else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
|
|
mem_staddr = au_readl(MEM_STADDR3);
|
|
|
|
if (mem_staddr == 0x00000000) {
|
|
printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
|
|
kfree(au1550_mtd);
|
|
return 1;
|
|
}
|
|
nand_phys = (mem_staddr << 4) & 0xFFFC0000;
|
|
|
|
p_nand = (void __iomem *)ioremap(nand_phys, 0x1000);
|
|
|
|
/* make controller and MTD agree */
|
|
if (NAND_CS == 0)
|
|
nand_width = au_readl(MEM_STCFG0) & (1 << 22);
|
|
if (NAND_CS == 1)
|
|
nand_width = au_readl(MEM_STCFG1) & (1 << 22);
|
|
if (NAND_CS == 2)
|
|
nand_width = au_readl(MEM_STCFG2) & (1 << 22);
|
|
if (NAND_CS == 3)
|
|
nand_width = au_readl(MEM_STCFG3) & (1 << 22);
|
|
|
|
/* Set address of hardware control function */
|
|
this->hwcontrol = au1550_hwcontrol;
|
|
this->dev_ready = au1550_device_ready;
|
|
/* 30 us command delay time */
|
|
this->chip_delay = 30;
|
|
this->eccmode = NAND_ECC_SOFT;
|
|
|
|
this->options = NAND_NO_AUTOINCR;
|
|
|
|
if (!nand_width)
|
|
this->options |= NAND_BUSWIDTH_16;
|
|
|
|
this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
|
|
this->write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
|
|
this->write_word = au_write_word;
|
|
this->read_word = au_read_word;
|
|
this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
|
|
this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
|
|
this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
|
|
|
|
/* Scan to find existence of the device */
|
|
if (nand_scan(au1550_mtd, 1)) {
|
|
retval = -ENXIO;
|
|
goto outio;
|
|
}
|
|
|
|
/* Register the partitions */
|
|
add_mtd_partitions(au1550_mtd, partition_info, ARRAY_SIZE(partition_info));
|
|
|
|
return 0;
|
|
|
|
outio:
|
|
iounmap((void *)p_nand);
|
|
|
|
outmem:
|
|
kfree(au1550_mtd);
|
|
return retval;
|
|
}
|
|
|
|
module_init(au1xxx_nand_init);
|
|
|
|
/*
|
|
* Clean up routine
|
|
*/
|
|
static void __exit au1550_cleanup(void)
|
|
{
|
|
struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
|
|
|
|
/* Release resources, unregister device */
|
|
nand_release(au1550_mtd);
|
|
|
|
/* Free the MTD device structure */
|
|
kfree(au1550_mtd);
|
|
|
|
/* Unmap */
|
|
iounmap((void *)p_nand);
|
|
}
|
|
|
|
module_exit(au1550_cleanup);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Embedded Edge, LLC");
|
|
MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board");
|