5a0e3ad6af
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
150 lines
5.2 KiB
C
150 lines
5.2 KiB
C
/*
|
|
* Blackfin Infra-red Driver
|
|
*
|
|
* Copyright 2006-2009 Analog Devices Inc.
|
|
*
|
|
* Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*
|
|
*/
|
|
|
|
#include <linux/serial.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <net/irda/irda.h>
|
|
#include <net/irda/wrapper.h>
|
|
#include <net/irda/irda_device.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/portmux.h>
|
|
|
|
#ifdef CONFIG_SIR_BFIN_DMA
|
|
struct dma_rx_buf {
|
|
char *buf;
|
|
int head;
|
|
int tail;
|
|
};
|
|
#endif
|
|
|
|
struct bfin_sir_port {
|
|
unsigned char __iomem *membase;
|
|
unsigned int irq;
|
|
unsigned int lsr;
|
|
unsigned long clk;
|
|
struct net_device *dev;
|
|
#ifdef CONFIG_SIR_BFIN_DMA
|
|
int tx_done;
|
|
struct dma_rx_buf rx_dma_buf;
|
|
struct timer_list rx_dma_timer;
|
|
int rx_dma_nrows;
|
|
#endif
|
|
unsigned int tx_dma_channel;
|
|
unsigned int rx_dma_channel;
|
|
};
|
|
|
|
struct bfin_sir_port_res {
|
|
unsigned long base_addr;
|
|
int irq;
|
|
unsigned int rx_dma_channel;
|
|
unsigned int tx_dma_channel;
|
|
};
|
|
|
|
struct bfin_sir_self {
|
|
struct bfin_sir_port *sir_port;
|
|
spinlock_t lock;
|
|
unsigned int open;
|
|
int speed;
|
|
int newspeed;
|
|
|
|
struct sk_buff *txskb;
|
|
struct sk_buff *rxskb;
|
|
struct net_device_stats stats;
|
|
struct device *dev;
|
|
struct irlap_cb *irlap;
|
|
struct qos_info qos;
|
|
|
|
iobuff_t tx_buff;
|
|
iobuff_t rx_buff;
|
|
|
|
struct work_struct work;
|
|
int mtt;
|
|
};
|
|
|
|
#define DRIVER_NAME "bfin_sir"
|
|
|
|
#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR)
|
|
#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL)
|
|
#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH)
|
|
#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR)
|
|
#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL)
|
|
|
|
#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
|
|
#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v)
|
|
#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v)
|
|
#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v)
|
|
#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
|
|
|
|
#ifdef CONFIG_BF54x
|
|
#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR)
|
|
#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET)
|
|
#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v)
|
|
#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
|
|
#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v)
|
|
#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1)
|
|
|
|
#define SIR_UART_SET_DLAB(port)
|
|
#define SIR_UART_CLEAR_DLAB(port)
|
|
|
|
#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_SET_IER(port, v)
|
|
#define SIR_UART_DISABLE_INTS(port) SIR_UART_CLEAR_IER(port, 0xF)
|
|
#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_LSR(port, TFI); SIR_UART_CLEAR_IER(port, ETBEI); } while (0)
|
|
#define SIR_UART_ENABLE_TX(port) do { SIR_UART_SET_IER(port, ETBEI); } while (0)
|
|
#define SIR_UART_STOP_RX(port) do { SIR_UART_CLEAR_IER(port, ERBFI); } while (0)
|
|
#define SIR_UART_ENABLE_RX(port) do { SIR_UART_SET_IER(port, ERBFI); } while (0)
|
|
#else
|
|
|
|
#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR)
|
|
#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER)
|
|
#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v)
|
|
|
|
#define SIR_UART_SET_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) | DLAB); } while (0)
|
|
#define SIR_UART_CLEAR_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) & ~DLAB); } while (0)
|
|
|
|
#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_PUT_IER(port, v)
|
|
#define SIR_UART_DISABLE_INTS(port) SIR_UART_PUT_IER(port, 0)
|
|
#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ETBEI); } while (0)
|
|
#define SIR_UART_ENABLE_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ETBEI); } while (0)
|
|
#define SIR_UART_STOP_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ERBFI); } while (0)
|
|
#define SIR_UART_ENABLE_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ERBFI); } while (0)
|
|
|
|
static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
|
|
{
|
|
unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
|
|
port->lsr |= (lsr & (BI|FE|PE|OE));
|
|
return lsr | port->lsr;
|
|
}
|
|
|
|
static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
|
|
{
|
|
port->lsr = 0;
|
|
bfin_read16(port->membase + OFFSET_LSR);
|
|
}
|
|
#endif
|
|
|
|
static const unsigned short per[][4] = {
|
|
/* rx pin tx pin NULL uart_number */
|
|
{P_UART0_RX, P_UART0_TX, 0, 0},
|
|
{P_UART1_RX, P_UART1_TX, 0, 1},
|
|
{P_UART2_RX, P_UART2_TX, 0, 2},
|
|
{P_UART3_RX, P_UART3_TX, 0, 3},
|
|
};
|