android_kernel_xiaomi_sm8350/drivers/ieee1394/sbp2.h
Stefan Richter ca0c745399 ieee1394: sbp2: clean up sbp2_ namespace
Prepend sbp2*_ to anything globally defined in sbp2.c except for some
macros.  Strip sbp2_ from names of struct members.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 22:51:53 +01:00

355 lines
10 KiB
C

/*
* sbp2.h - Defines and prototypes for sbp2.c
*
* Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
* jamesg@filanet.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef SBP2_H
#define SBP2_H
#define SBP2_DEVICE_NAME "sbp2"
/*
* SBP-2 specific definitions
*/
#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0
#define ORB_DIRECTION_READ_FROM_MEDIA 0x1
#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
#define ORB_SET_NULL_PTR(v) (((v) & 0x1) << 31)
#define ORB_SET_NOTIFY(v) (((v) & 0x1) << 31)
#define ORB_SET_RQ_FMT(v) (((v) & 0x3) << 29)
#define ORB_SET_NODE_ID(v) (((v) & 0xffff) << 16)
#define ORB_SET_STATUS_FIFO_HI(v, id) ((v) >> 32 | ORB_SET_NODE_ID(id))
#define ORB_SET_STATUS_FIFO_LO(v) ((v) & 0xffffffff)
#define ORB_SET_DATA_SIZE(v) ((v) & 0xffff)
#define ORB_SET_PAGE_SIZE(v) (((v) & 0x7) << 16)
#define ORB_SET_PAGE_TABLE_PRESENT(v) (((v) & 0x1) << 19)
#define ORB_SET_MAX_PAYLOAD(v) (((v) & 0xf) << 20)
#define ORB_SET_SPEED(v) (((v) & 0x7) << 24)
#define ORB_SET_DIRECTION(v) (((v) & 0x1) << 27)
struct sbp2_command_orb {
u32 next_ORB_hi;
u32 next_ORB_lo;
u32 data_descriptor_hi;
u32 data_descriptor_lo;
u32 misc;
u8 cdb[12];
} __attribute__((packed));
#define SBP2_LOGIN_REQUEST 0x0
#define SBP2_QUERY_LOGINS_REQUEST 0x1
#define SBP2_RECONNECT_REQUEST 0x3
#define SBP2_SET_PASSWORD_REQUEST 0x4
#define SBP2_LOGOUT_REQUEST 0x7
#define SBP2_ABORT_TASK_REQUEST 0xb
#define SBP2_ABORT_TASK_SET 0xc
#define SBP2_LOGICAL_UNIT_RESET 0xe
#define SBP2_TARGET_RESET_REQUEST 0xf
#define ORB_SET_LUN(v) ((v) & 0xffff)
#define ORB_SET_FUNCTION(v) (((v) & 0xf) << 16)
#define ORB_SET_RECONNECT(v) (((v) & 0xf) << 20)
#define ORB_SET_EXCLUSIVE(v) (((v) & 0x1) << 28)
#define ORB_SET_LOGIN_RESP_LENGTH(v) ((v) & 0xffff)
#define ORB_SET_PASSWD_LENGTH(v) (((v) & 0xffff) << 16)
struct sbp2_login_orb {
u32 password_hi;
u32 password_lo;
u32 login_response_hi;
u32 login_response_lo;
u32 lun_misc;
u32 passwd_resp_lengths;
u32 status_fifo_hi;
u32 status_fifo_lo;
} __attribute__((packed));
#define RESPONSE_GET_LOGIN_ID(v) ((v) & 0xffff)
#define RESPONSE_GET_LENGTH(v) (((v) >> 16) & 0xffff)
#define RESPONSE_GET_RECONNECT_HOLD(v) ((v) & 0xffff)
struct sbp2_login_response {
u32 length_login_ID;
u32 command_block_agent_hi;
u32 command_block_agent_lo;
u32 reconnect_hold;
} __attribute__((packed));
#define ORB_SET_LOGIN_ID(v) ((v) & 0xffff)
#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
struct sbp2_query_logins_orb {
u32 reserved1;
u32 reserved2;
u32 query_response_hi;
u32 query_response_lo;
u32 lun_misc;
u32 reserved_resp_length;
u32 status_fifo_hi;
u32 status_fifo_lo;
} __attribute__((packed));
#define RESPONSE_GET_MAX_LOGINS(v) ((v) & 0xffff)
#define RESPONSE_GET_ACTIVE_LOGINS(v) ((RESPONSE_GET_LENGTH((v)) - 4) / 12)
struct sbp2_query_logins_response {
u32 length_max_logins;
u32 misc_IDs;
u32 initiator_misc_hi;
u32 initiator_misc_lo;
} __attribute__((packed));
struct sbp2_reconnect_orb {
u32 reserved1;
u32 reserved2;
u32 reserved3;
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_fifo_hi;
u32 status_fifo_lo;
} __attribute__((packed));
struct sbp2_logout_orb {
u32 reserved1;
u32 reserved2;
u32 reserved3;
u32 reserved4;
u32 login_ID_misc;
u32 reserved5;
u32 status_fifo_hi;
u32 status_fifo_lo;
} __attribute__((packed));
#define PAGE_TABLE_SET_SEGMENT_BASE_HI(v) ((v) & 0xffff)
#define PAGE_TABLE_SET_SEGMENT_LENGTH(v) (((v) & 0xffff) << 16)
struct sbp2_unrestricted_page_table {
u32 length_segment_base_hi;
u32 segment_base_lo;
} __attribute__((packed));
#define RESP_STATUS_REQUEST_COMPLETE 0x0
#define RESP_STATUS_TRANSPORT_FAILURE 0x1
#define RESP_STATUS_ILLEGAL_REQUEST 0x2
#define RESP_STATUS_VENDOR_DEPENDENT 0x3
#define SBP2_STATUS_NO_ADDITIONAL_INFO 0x0
#define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED 0x1
#define SBP2_STATUS_SPEED_NOT_SUPPORTED 0x2
#define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED 0x3
#define SBP2_STATUS_ACCESS_DENIED 0x4
#define SBP2_STATUS_LU_NOT_SUPPORTED 0x5
#define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL 0x6
#define SBP2_STATUS_RESOURCES_UNAVAILABLE 0x8
#define SBP2_STATUS_FUNCTION_REJECTED 0x9
#define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED 0xa
#define SBP2_STATUS_DUMMY_ORB_COMPLETED 0xb
#define SBP2_STATUS_REQUEST_ABORTED 0xc
#define SBP2_STATUS_UNSPECIFIED_ERROR 0xff
#define SFMT_CURRENT_ERROR 0x0
#define SFMT_DEFERRED_ERROR 0x1
#define SFMT_VENDOR_DEPENDENT_STATUS 0x3
#define STATUS_GET_SRC(v) (((v) >> 30) & 0x3)
#define STATUS_GET_RESP(v) (((v) >> 28) & 0x3)
#define STATUS_GET_LEN(v) (((v) >> 24) & 0x7)
#define STATUS_GET_SBP_STATUS(v) (((v) >> 16) & 0xff)
#define STATUS_GET_ORB_OFFSET_HI(v) ((v) & 0x0000ffff)
#define STATUS_TEST_DEAD(v) ((v) & 0x08000000)
/* test 'resp' | 'dead' | 'sbp2_status' */
#define STATUS_TEST_RDS(v) ((v) & 0x38ff0000)
struct sbp2_status_block {
u32 ORB_offset_hi_misc;
u32 ORB_offset_lo;
u8 command_set_dependent[24];
} __attribute__((packed));
/*
* SBP2 related configuration ROM definitions
*/
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
#define SBP2_CSR_OFFSET_KEY 0x54
#define SBP2_UNIT_SPEC_ID_KEY 0x12
#define SBP2_UNIT_SW_VERSION_KEY 0x13
#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38
#define SBP2_COMMAND_SET_KEY 0x39
#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a
#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14
#define SBP2_FIRMWARE_REVISION_KEY 0x3c
#define SBP2_AGENT_STATE_OFFSET 0x00ULL
#define SBP2_AGENT_RESET_OFFSET 0x04ULL
#define SBP2_ORB_POINTER_OFFSET 0x08ULL
#define SBP2_DOORBELL_OFFSET 0x10ULL
#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL
#define SBP2_UNSOLICITED_STATUS_VALUE 0xf
#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL
/* biggest possible value for Single Phase Retry count is 0xf */
#define SBP2_BUSY_TIMEOUT_VALUE 0xf
#define SBP2_AGENT_RESET_DATA 0xf
#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
#define SBP2_SW_VERSION_ENTRY 0x00010483
/*
* SCSI specific definitions
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
#define SBP2_MAX_SECTORS 255
/* There is no real limitation of the queue depth (i.e. length of the linked
* list of command ORBs) at the target. The chosen depth is merely an
* implementation detail of the sbp2 driver. */
#define SBP2_MAX_CMDS 8
#define SBP2_SCSI_STATUS_GOOD 0x0
#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2
#define SBP2_SCSI_STATUS_CONDITION_MET 0x4
#define SBP2_SCSI_STATUS_BUSY 0x8
#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18
#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22
#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
/*
* Representations of commands and devices
*/
enum sbp2_dma_types {
CMD_DMA_NONE,
CMD_DMA_PAGE,
CMD_DMA_SINGLE
};
/* Per SCSI command */
struct sbp2_command_info {
struct list_head list;
struct sbp2_command_orb command_orb ____cacheline_aligned;
dma_addr_t command_orb_dma ____cacheline_aligned;
struct scsi_cmnd *Current_SCpnt;
void (*Current_done)(struct scsi_cmnd *);
/* Also need s/g structure for each sbp2 command */
struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned;
dma_addr_t sge_dma ____cacheline_aligned;
void *sge_buffer;
dma_addr_t cmd_dma;
enum sbp2_dma_types dma_type;
unsigned long dma_size;
int dma_dir;
};
/* Per FireWire host */
struct sbp2_fwhost_info {
struct hpsb_host *host;
struct list_head scsi_ids;
};
/* Per logical unit */
struct scsi_id_instance_data {
/* Operation request blocks */
struct sbp2_command_orb *last_orb;
dma_addr_t last_orb_dma;
struct sbp2_login_orb *login_orb;
dma_addr_t login_orb_dma;
struct sbp2_login_response *login_response;
dma_addr_t login_response_dma;
struct sbp2_query_logins_orb *query_logins_orb;
dma_addr_t query_logins_orb_dma;
struct sbp2_query_logins_response *query_logins_response;
dma_addr_t query_logins_response_dma;
struct sbp2_reconnect_orb *reconnect_orb;
dma_addr_t reconnect_orb_dma;
struct sbp2_logout_orb *logout_orb;
dma_addr_t logout_orb_dma;
struct sbp2_status_block status_block;
/* How to talk to the unit */
u64 management_agent_addr;
u64 command_block_agent_addr;
u32 speed_code;
u32 max_payload_size;
/* Pulled from the device's unit directory */
u32 command_set_spec_id;
u32 command_set;
u32 unit_characteristics;
u32 firmware_revision;
u16 lun;
/* Address for the unit to write status blocks to */
u64 status_fifo_addr;
/* Waitqueue flag for logins, reconnects, logouts, query logins */
int access_complete:1;
/* Pool of command ORBs for this logical unit */
spinlock_t cmd_orb_lock;
struct list_head cmd_orb_inuse;
struct list_head cmd_orb_completed;
/* Backlink to FireWire host; list of units attached to the host */
struct sbp2_fwhost_info *hi;
struct list_head scsi_list;
/* IEEE 1394 core's device representations */
struct node_entry *ne;
struct unit_directory *ud;
/* SCSI core's device representations */
struct scsi_device *sdev;
struct Scsi_Host *scsi_host;
/* Device specific workarounds/brokeness */
unsigned workarounds;
/* Connection state */
atomic_t state;
/* For deferred requests to the fetch agent */
struct work_struct protocol_work;
};
/* For use in scsi_id_instance_data.state */
enum sbp2lu_state_types {
SBP2LU_STATE_RUNNING, /* all normal */
SBP2LU_STATE_IN_RESET, /* between bus reset and reconnect */
SBP2LU_STATE_IN_SHUTDOWN /* when sbp2_remove was called */
};
/* For use in scsi_id_instance_data.workarounds and in the corresponding
* module load parameter */
#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
#define SBP2_WORKAROUND_INQUIRY_36 0x2
#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
#define SBP2_WORKAROUND_OVERRIDE 0x100
#endif /* SBP2_H */