android_kernel_xiaomi_sm8350/drivers/usb/gadget/Makefile
Craig W. Nadler 25a010c8c1 USB: add Printer Gadget Driver
G_PRINTER: Adds a USB printer gadget driver for use in printer firmware.

This adds a USB printer gadget driver for use in printer firmware.
The printer gadget channels data between the USB host and a userspace
program driving the print engine. The user space program reads and
writes the device file /dev/g_printer to receive or send printer data.
It can use ioctl calls to the device file to get or set printer status.

Signed-off-by: Craig W. Nadler <craig@nadler.us>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:49 -08:00

46 lines
1.4 KiB
Makefile

#
# USB peripheral controller drivers
#
ifeq ($(CONFIG_USB_GADGET_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2280) += net2280.o
obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
obj-$(CONFIG_USB_M66592) += m66592-udc.o
#
# USB gadget drivers
#
g_zero-objs := zero.o usbstring.o config.o epautoconf.o
g_ether-objs := ether.o usbstring.o config.o epautoconf.o
g_serial-objs := serial.o usbstring.o config.o epautoconf.o
g_midi-objs := gmidi.o usbstring.o config.o epautoconf.o
gadgetfs-objs := inode.o
g_file_storage-objs := file_storage.o usbstring.o config.o \
epautoconf.o
g_printer-objs := printer.o usbstring.o config.o \
epautoconf.o
ifeq ($(CONFIG_USB_ETH_RNDIS),y)
g_ether-objs += rndis.o
endif
obj-$(CONFIG_USB_ZERO) += g_zero.o
obj-$(CONFIG_USB_ETH) += g_ether.o
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o