android_kernel_xiaomi_sm8350/arch/powerpc/include/asm/mpc52xx.h
Grant Likely bcb73f5611 powerpc/mpc5200: Document and tidy irq driver
This patch adds documentation to the mpc5200 interrupt controller
driver and cleans up some minor coding conventions.  It also moves the
contents of mpc52xx_pic.h into the driver proper (except for a small
common bit that is moved to the common mpc52xx.h) because the
information encoded there is not required by any other part of kernel
code.  Finally for code readability sake, the L2_OFFSET shift value
is removed because the code using it resolves to a noop.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:26 -07:00

315 lines
9.4 KiB
C

/*
* Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
* May need to be cleaned as the port goes on ...
*
* Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
* Copyright (C) 2003 MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#ifndef __ASM_POWERPC_MPC52xx_H__
#define __ASM_POWERPC_MPC52xx_H__
#ifndef __ASSEMBLY__
#include <asm/types.h>
#include <asm/prom.h>
#endif /* __ASSEMBLY__ */
#include <linux/suspend.h>
/* Variants of the 5200(B) */
#define MPC5200_SVR 0x80110010
#define MPC5200_SVR_MASK 0xfffffff0
#define MPC5200B_SVR 0x80110020
#define MPC5200B_SVR_MASK 0xfffffff0
/* ======================================================================== */
/* Structures mapping of some unit register set */
/* ======================================================================== */
#ifndef __ASSEMBLY__
/* Memory Mapping Control */
struct mpc52xx_mmap_ctl {
u32 mbar; /* MMAP_CTRL + 0x00 */
u32 cs0_start; /* MMAP_CTRL + 0x04 */
u32 cs0_stop; /* MMAP_CTRL + 0x08 */
u32 cs1_start; /* MMAP_CTRL + 0x0c */
u32 cs1_stop; /* MMAP_CTRL + 0x10 */
u32 cs2_start; /* MMAP_CTRL + 0x14 */
u32 cs2_stop; /* MMAP_CTRL + 0x18 */
u32 cs3_start; /* MMAP_CTRL + 0x1c */
u32 cs3_stop; /* MMAP_CTRL + 0x20 */
u32 cs4_start; /* MMAP_CTRL + 0x24 */
u32 cs4_stop; /* MMAP_CTRL + 0x28 */
u32 cs5_start; /* MMAP_CTRL + 0x2c */
u32 cs5_stop; /* MMAP_CTRL + 0x30 */
u32 sdram0; /* MMAP_CTRL + 0x34 */
u32 sdram1; /* MMAP_CTRL + 0X38 */
u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */
u32 boot_start; /* MMAP_CTRL + 0x4c */
u32 boot_stop; /* MMAP_CTRL + 0x50 */
u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */
u32 cs6_start; /* MMAP_CTRL + 0x58 */
u32 cs6_stop; /* MMAP_CTRL + 0x5c */
u32 cs7_start; /* MMAP_CTRL + 0x60 */
u32 cs7_stop; /* MMAP_CTRL + 0x64 */
};
/* SDRAM control */
struct mpc52xx_sdram {
u32 mode; /* SDRAM + 0x00 */
u32 ctrl; /* SDRAM + 0x04 */
u32 config1; /* SDRAM + 0x08 */
u32 config2; /* SDRAM + 0x0c */
};
/* SDMA */
struct mpc52xx_sdma {
u32 taskBar; /* SDMA + 0x00 */
u32 currentPointer; /* SDMA + 0x04 */
u32 endPointer; /* SDMA + 0x08 */
u32 variablePointer; /* SDMA + 0x0c */
u8 IntVect1; /* SDMA + 0x10 */
u8 IntVect2; /* SDMA + 0x11 */
u16 PtdCntrl; /* SDMA + 0x12 */
u32 IntPend; /* SDMA + 0x14 */
u32 IntMask; /* SDMA + 0x18 */
u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */
u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */
u32 cReqSelect; /* SDMA + 0x5c */
u32 task_size0; /* SDMA + 0x60 */
u32 task_size1; /* SDMA + 0x64 */
u32 MDEDebug; /* SDMA + 0x68 */
u32 ADSDebug; /* SDMA + 0x6c */
u32 Value1; /* SDMA + 0x70 */
u32 Value2; /* SDMA + 0x74 */
u32 Control; /* SDMA + 0x78 */
u32 Status; /* SDMA + 0x7c */
u32 PTDDebug; /* SDMA + 0x80 */
};
/* GPT */
struct mpc52xx_gpt {
u32 mode; /* GPTx + 0x00 */
u32 count; /* GPTx + 0x04 */
u32 pwm; /* GPTx + 0x08 */
u32 status; /* GPTx + 0X0c */
};
/* GPIO */
struct mpc52xx_gpio {
u32 port_config; /* GPIO + 0x00 */
u32 simple_gpioe; /* GPIO + 0x04 */
u32 simple_ode; /* GPIO + 0x08 */
u32 simple_ddr; /* GPIO + 0x0c */
u32 simple_dvo; /* GPIO + 0x10 */
u32 simple_ival; /* GPIO + 0x14 */
u8 outo_gpioe; /* GPIO + 0x18 */
u8 reserved1[3]; /* GPIO + 0x19 */
u8 outo_dvo; /* GPIO + 0x1c */
u8 reserved2[3]; /* GPIO + 0x1d */
u8 sint_gpioe; /* GPIO + 0x20 */
u8 reserved3[3]; /* GPIO + 0x21 */
u8 sint_ode; /* GPIO + 0x24 */
u8 reserved4[3]; /* GPIO + 0x25 */
u8 sint_ddr; /* GPIO + 0x28 */
u8 reserved5[3]; /* GPIO + 0x29 */
u8 sint_dvo; /* GPIO + 0x2c */
u8 reserved6[3]; /* GPIO + 0x2d */
u8 sint_inten; /* GPIO + 0x30 */
u8 reserved7[3]; /* GPIO + 0x31 */
u16 sint_itype; /* GPIO + 0x34 */
u16 reserved8; /* GPIO + 0x36 */
u8 gpio_control; /* GPIO + 0x38 */
u8 reserved9[3]; /* GPIO + 0x39 */
u8 sint_istat; /* GPIO + 0x3c */
u8 sint_ival; /* GPIO + 0x3d */
u8 bus_errs; /* GPIO + 0x3e */
u8 reserved10; /* GPIO + 0x3f */
};
#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4
#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
#define MPC52xx_GPIO_PCI_DIS (1<<15)
/* GPIO with WakeUp*/
struct mpc52xx_gpio_wkup {
u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
u8 reserved1[3]; /* GPIO_WKUP + 0x03 */
u8 wkup_ode; /* GPIO_WKUP + 0x04 */
u8 reserved2[3]; /* GPIO_WKUP + 0x05 */
u8 wkup_ddr; /* GPIO_WKUP + 0x08 */
u8 reserved3[3]; /* GPIO_WKUP + 0x09 */
u8 wkup_dvo; /* GPIO_WKUP + 0x0C */
u8 reserved4[3]; /* GPIO_WKUP + 0x0D */
u8 wkup_inten; /* GPIO_WKUP + 0x10 */
u8 reserved5[3]; /* GPIO_WKUP + 0x11 */
u8 wkup_iinten; /* GPIO_WKUP + 0x14 */
u8 reserved6[3]; /* GPIO_WKUP + 0x15 */
u16 wkup_itype; /* GPIO_WKUP + 0x18 */
u8 reserved7[2]; /* GPIO_WKUP + 0x1A */
u8 wkup_maste; /* GPIO_WKUP + 0x1C */
u8 reserved8[3]; /* GPIO_WKUP + 0x1D */
u8 wkup_ival; /* GPIO_WKUP + 0x20 */
u8 reserved9[3]; /* GPIO_WKUP + 0x21 */
u8 wkup_istat; /* GPIO_WKUP + 0x24 */
u8 reserved10[3]; /* GPIO_WKUP + 0x25 */
};
/* XLB Bus control */
struct mpc52xx_xlb {
u8 reserved[0x40];
u32 config; /* XLB + 0x40 */
u32 version; /* XLB + 0x44 */
u32 status; /* XLB + 0x48 */
u32 int_enable; /* XLB + 0x4c */
u32 addr_capture; /* XLB + 0x50 */
u32 bus_sig_capture; /* XLB + 0x54 */
u32 addr_timeout; /* XLB + 0x58 */
u32 data_timeout; /* XLB + 0x5c */
u32 bus_act_timeout; /* XLB + 0x60 */
u32 master_pri_enable; /* XLB + 0x64 */
u32 master_priority; /* XLB + 0x68 */
u32 base_address; /* XLB + 0x6c */
u32 snoop_window; /* XLB + 0x70 */
};
#define MPC52xx_XLB_CFG_PLDIS (1 << 31)
#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
/* Clock Distribution control */
struct mpc52xx_cdm {
u32 jtag_id; /* CDM + 0x00 reg0 read only */
u32 rstcfg; /* CDM + 0x04 reg1 read only */
u32 breadcrumb; /* CDM + 0x08 reg2 */
u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */
u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */
u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */
u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */
u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */
u8 fd_enable; /* CDM + 0x11 reg4 byte1 */
u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */
u32 clk_enables; /* CDM + 0x14 reg5 */
u8 osc_disable; /* CDM + 0x18 reg6 byte0 */
u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */
u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */
u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */
u8 reserved1; /* CDM + 0x1e reg7 byte2 */
u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */
u8 soft_reset; /* CDM + 0x20 u8 byte0 */
u8 no_ckstp; /* CDM + 0x21 u8 byte0 */
u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */
u8 pll_lock; /* CDM + 0x24 reg9 byte0 */
u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */
u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */
u8 reserved3; /* CDM + 0x27 reg9 byte3 */
u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */
u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */
u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */
u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */
u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */
u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */
u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */
u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */
};
/* Interrupt controller Register set */
struct mpc52xx_intr {
u32 per_mask; /* INTR + 0x00 */
u32 per_pri1; /* INTR + 0x04 */
u32 per_pri2; /* INTR + 0x08 */
u32 per_pri3; /* INTR + 0x0c */
u32 ctrl; /* INTR + 0x10 */
u32 main_mask; /* INTR + 0x14 */
u32 main_pri1; /* INTR + 0x18 */
u32 main_pri2; /* INTR + 0x1c */
u32 reserved1; /* INTR + 0x20 */
u32 enc_status; /* INTR + 0x24 */
u32 crit_status; /* INTR + 0x28 */
u32 main_status; /* INTR + 0x2c */
u32 per_status; /* INTR + 0x30 */
u32 reserved2; /* INTR + 0x34 */
u32 per_error; /* INTR + 0x38 */
};
#endif /* __ASSEMBLY__ */
/* ========================================================================= */
/* Prototypes for MPC52xx sysdev */
/* ========================================================================= */
#ifndef __ASSEMBLY__
/* mpc52xx_common.c */
extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
extern void mpc5200_setup_xlb_arbiter(void);
extern void mpc52xx_declare_of_platform_devices(void);
extern void mpc52xx_map_common_devices(void);
extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
extern void mpc52xx_restart(char *cmd);
/* mpc52xx_pic.c */
extern void mpc52xx_init_irq(void);
extern unsigned int mpc52xx_get_irq(void);
/* mpc52xx_pci.c */
#ifdef CONFIG_PCI
extern int __init mpc52xx_add_bridge(struct device_node *node);
extern void __init mpc52xx_setup_pci(void);
#else
static inline void mpc52xx_setup_pci(void) { }
#endif
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PM
struct mpc52xx_suspend {
void (*board_suspend_prepare)(void __iomem *mbar);
void (*board_resume_finish)(void __iomem *mbar);
};
extern struct mpc52xx_suspend mpc52xx_suspend;
extern int __init mpc52xx_pm_init(void);
extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
#ifdef CONFIG_PPC_LITE5200
extern int __init lite5200_pm_init(void);
/* lite5200 calls mpc5200 suspend functions, so here they are */
extern int mpc52xx_pm_prepare(void);
extern int mpc52xx_pm_enter(suspend_state_t);
extern void mpc52xx_pm_finish(void);
extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
#endif
#endif /* CONFIG_PM */
#endif /* __ASM_POWERPC_MPC52xx_H__ */