1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
277 lines
9.8 KiB
C
277 lines
9.8 KiB
C
/* $Id: aurora.h,v 1.6 2001/06/05 12:23:38 davem Exp $
|
|
* linux/drivers/sbus/char/aurora.h -- Aurora multiport driver
|
|
*
|
|
* Copyright (c) 1999 by Oliver Aldulea (oli@bv.ro)
|
|
*
|
|
* This code is based on the RISCom/8 multiport serial driver written
|
|
* by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial
|
|
* driver, written by Linus Torvalds, Theodore T'so and others.
|
|
* The Aurora multiport programming info was obtained mainly from the
|
|
* Cirrus Logic CD180 documentation (available on the web), and by
|
|
* doing heavy tests on the board. Many thanks to Eddie C. Dost for the
|
|
* help on the sbus interface.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Revision 1.0
|
|
*
|
|
* This is the first public release.
|
|
*
|
|
* This version needs a lot of feedback. This is the version that works
|
|
* with _my_ board. My board is model 1600se, revision '@(#)1600se.fth
|
|
* 1.2 3/28/95 1'. The driver might work with your board, but I do not
|
|
* guarantee it. If you have _any_ type of board, I need to know if the
|
|
* driver works or not, I need to know exactly your board parameters
|
|
* (get them with 'cd /proc/openprom/iommu/sbus/sio16/; ls *; cat *')
|
|
* Also, I need your board revision code, which is written on the board.
|
|
* Send me the output of my driver too (it outputs through klogd).
|
|
*
|
|
* If the driver does not work, you can try enabling the debug options
|
|
* to see what's wrong or what should be done.
|
|
*
|
|
* I'm sorry about the alignment of the code. It was written in a
|
|
* 128x48 environment.
|
|
*
|
|
* I must say that I do not like Aurora Technologies' policy. I asked
|
|
* them to help me do this driver faster, but they ended by something
|
|
* like "don't call us, we'll call you", and I never heard anything
|
|
* from them. They told me "knowing the way the board works, I don't
|
|
* doubt you and others on the net will make the driver."
|
|
* The truth about this board is that it has nothing intelligent on it.
|
|
* If you want to say to somebody what kind of board you have, say that
|
|
* it uses Cirrus Logic processors (CD180). The power of the board is
|
|
* in those two chips. The rest of the board is the interface to the
|
|
* sbus and to the peripherals. Still, they did something smart: they
|
|
* reversed DTR and RTS to make on-board automatic hardware flow
|
|
* control usable.
|
|
* Thanks to Aurora Technologies for wasting my time, nerves and money.
|
|
*/
|
|
|
|
#ifndef __LINUX_AURORA_H
|
|
#define __LINUX_AURORA_H
|
|
|
|
#include <linux/serial.h>
|
|
#include <linux/serialP.h>
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
/* This is the number of boards to support. I've only tested this driver with
|
|
* one board, so it might not work.
|
|
*/
|
|
#define AURORA_NBOARD 1
|
|
|
|
/* Useful ? Yes. But you can safely comment the warnings if they annoy you
|
|
* (let me say that again: the warnings in the code, not this define).
|
|
*/
|
|
#define AURORA_PARANOIA_CHECK
|
|
|
|
/* Well, after many lost nights, I found that the IRQ for this board is
|
|
* selected from four built-in values by writing some bits in the
|
|
* configuration register. This causes a little problem to occur: which
|
|
* IRQ to select ? Which one is the best for the user ? Well, I finally
|
|
* decided for the following algorithm: if the "bintr" value is not acceptable
|
|
* (not within type_1_irq[], then test the "intr" value, if that fails too,
|
|
* try each value from type_1_irq until succeded. Hope it's ok.
|
|
* You can safely reorder the irq's.
|
|
*/
|
|
#define TYPE_1_IRQS 4
|
|
unsigned char type_1_irq[TYPE_1_IRQS] = {
|
|
3, 5, 9, 13
|
|
};
|
|
/* I know something about another method of interrupt setting, but not enough.
|
|
* Also, this is for another type of board, so I first have to learn how to
|
|
* detect it.
|
|
#define TYPE_2_IRQS 3
|
|
unsigned char type_2_irq[TYPE_2_IRQS] = {
|
|
0, 0, 0 ** could anyone find these for me ? (see AURORA_ALLIRQ below) **
|
|
};
|
|
unsigned char type_2_mask[TYPE_2_IRQS] = {
|
|
32, 64, 128
|
|
};
|
|
*/
|
|
|
|
/* The following section should only be modified by those who know what
|
|
* they're doing (or don't, but want to help with some feedback). Modifying
|
|
* anything raises a _big_ probability for your system to hang, but the
|
|
* sacrifice worths. (I sacrificed my ext2fs many, many times...)
|
|
*/
|
|
|
|
/* This one tries to dump to console the name of almost every function called,
|
|
* and many other debugging info.
|
|
*/
|
|
#undef AURORA_DEBUG
|
|
|
|
/* These are the most dangerous and useful defines. They do printk() during
|
|
* the interrupt processing routine(s), so if you manage to get "flooded" by
|
|
* irq's, start thinking about the "Power off/on" button...
|
|
*/
|
|
#undef AURORA_INTNORM /* This one enables the "normal" messages, but some
|
|
* of them cause flood, so I preffered putting
|
|
* them under a define */
|
|
#undef AURORA_INT_DEBUG /* This one is really bad. */
|
|
|
|
/* Here's something helpful: after n irq's, the board will be disabled. This
|
|
* prevents irq flooding during debug (no need to think about power
|
|
* off/on anymore...)
|
|
*/
|
|
#define AURORA_FLOODPRO 10
|
|
|
|
/* This one helps finding which irq the board calls, in case of a strange/
|
|
* unsupported board. AURORA_INT_DEBUG should be enabled, because I don't
|
|
* think /proc/interrupts or any command will be available in case of an irq
|
|
* flood... "allirq" is the list of all free irq's.
|
|
*/
|
|
/*
|
|
#define AURORA_ALLIRQ 6
|
|
int allirq[AURORA_ALLIRQ]={
|
|
2,3,5,7,9,13
|
|
};
|
|
*/
|
|
|
|
/* These must not be modified. These values are assumed during the code for
|
|
* performance optimisations.
|
|
*/
|
|
#define AURORA_NCD180 2 /* two chips per board */
|
|
#define AURORA_NPORT 8 /* 8 ports per chip */
|
|
|
|
/* several utilities */
|
|
#define AURORA_BOARD(line) (((line) >> 4) & 0x01)
|
|
#define AURORA_CD180(line) (((line) >> 3) & 0x01)
|
|
#define AURORA_PORT(line) ((line) & 15)
|
|
|
|
#define AURORA_TNPORTS (AURORA_NBOARD*AURORA_NCD180*AURORA_NPORT)
|
|
|
|
/* Ticks per sec. Used for setting receiver timeout and break length */
|
|
#define AURORA_TPS 4000
|
|
|
|
#define AURORA_MAGIC 0x0A18
|
|
|
|
/* Yeah, after heavy testing I decided it must be 6.
|
|
* Sure, You can change it if needed.
|
|
*/
|
|
#define AURORA_RXFIFO 6 /* Max. receiver FIFO size (1-8) */
|
|
|
|
#define AURORA_RXTH 7
|
|
|
|
struct aurora_reg1 {
|
|
__volatile__ unsigned char r;
|
|
};
|
|
|
|
struct aurora_reg128 {
|
|
__volatile__ unsigned char r[128];
|
|
};
|
|
|
|
struct aurora_reg4 {
|
|
__volatile__ unsigned char r[4];
|
|
};
|
|
|
|
struct Aurora_board {
|
|
unsigned long flags;
|
|
struct aurora_reg1 * r0; /* This is the board configuration
|
|
* register (write-only). */
|
|
struct aurora_reg128 * r[2]; /* These are the registers for the
|
|
* two chips. */
|
|
struct aurora_reg4 * r3; /* These are used for hardware-based
|
|
* acknowledge. Software-based ack is
|
|
* not supported by CD180. */
|
|
unsigned int oscfreq; /* The on-board oscillator
|
|
* frequency, in Hz. */
|
|
unsigned char irq;
|
|
#ifdef MODULE
|
|
signed char count; /* counts the use of the board */
|
|
#endif
|
|
/* Values for the dtr_rts swapped mode. */
|
|
unsigned char DTR;
|
|
unsigned char RTS;
|
|
unsigned char MSVDTR;
|
|
unsigned char MSVRTS;
|
|
/* Values for hardware acknowledge. */
|
|
unsigned char ACK_MINT, ACK_TINT, ACK_RINT;
|
|
};
|
|
|
|
/* Board configuration register */
|
|
#define AURORA_CFG_ENABLE_IO 8
|
|
#define AURORA_CFG_ENABLE_IRQ 4
|
|
|
|
/* Board flags */
|
|
#define AURORA_BOARD_PRESENT 0x00000001
|
|
#define AURORA_BOARD_ACTIVE 0x00000002
|
|
#define AURORA_BOARD_TYPE_2 0x00000004 /* don't know how to
|
|
* detect this yet */
|
|
#define AURORA_BOARD_DTR_FLOW_OK 0x00000008
|
|
|
|
/* The story goes like this: Cirrus programmed the CD-180 chip to do automatic
|
|
* hardware flow control, and do it using CTS and DTR. CTS is ok, but, if you
|
|
* have a modem and the chip drops DTR, then the modem will drop the carrier
|
|
* (ain't that cute...). Luckily, the guys at Aurora decided to swap DTR and
|
|
* RTS, which makes the flow control usable. I hope that all the boards made
|
|
* by Aurora have these two signals swapped. If your's doesn't but you have a
|
|
* breakout box, you can try to reverse them yourself, then set the following
|
|
* flag.
|
|
*/
|
|
#undef AURORA_FORCE_DTR_FLOW
|
|
|
|
/* In fact, a few more words have to be said about hardware flow control.
|
|
* This driver handles "output" flow control through the on-board facility
|
|
* CTS Auto Enable. For the "input" flow control there are two cases when
|
|
* the flow should be controlled. The first case is when the kernel is so
|
|
* busy that it cannot process IRQ's in time; this flow control can only be
|
|
* activated by the on-board chip, and if the board has RTS and DTR swapped,
|
|
* this facility is usable. The second case is when the application is so
|
|
* busy that it cannot receive bytes from the kernel, and this flow must be
|
|
* activated by software. This second case is not yet implemented in this
|
|
* driver. Unfortunately, I estimate that the second case is the one that
|
|
* occurs the most.
|
|
*/
|
|
|
|
|
|
struct Aurora_port {
|
|
int magic;
|
|
int baud_base;
|
|
int flags;
|
|
struct tty_struct * tty;
|
|
int count;
|
|
int blocked_open;
|
|
long event;
|
|
int timeout;
|
|
int close_delay;
|
|
unsigned char * xmit_buf;
|
|
int custom_divisor;
|
|
int xmit_head;
|
|
int xmit_tail;
|
|
int xmit_cnt;
|
|
wait_queue_head_t open_wait;
|
|
wait_queue_head_t close_wait;
|
|
struct tq_struct tqueue;
|
|
struct tq_struct tqueue_hangup;
|
|
short wakeup_chars;
|
|
short break_length;
|
|
unsigned short closing_wait;
|
|
unsigned char mark_mask;
|
|
unsigned char SRER;
|
|
unsigned char MSVR;
|
|
unsigned char COR2;
|
|
#ifdef AURORA_REPORT_OVERRUN
|
|
unsigned long overrun;
|
|
#endif
|
|
#ifdef AURORA_REPORT_FIFO
|
|
unsigned long hits[10];
|
|
#endif
|
|
};
|
|
|
|
#endif
|
|
#endif /*__LINUX_AURORA_H*/
|
|
|