android_kernel_xiaomi_sm8350/drivers/mfd/mcp-sa11x0.c
Russell King 9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00

274 lines
5.6 KiB
C

/*
* linux/drivers/mfd/mcp-sa11x0.c
*
* Copyright (C) 2001-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* SA11x0 MCP (Multimedia Communications Port) driver.
*
* MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <asm/dma.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/system.h>
#include <asm/arch/mcp.h>
#include <asm/arch/assabet.h>
#include "mcp.h"
struct mcp_sa11x0 {
u32 mccr0;
u32 mccr1;
};
#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
static void
mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
{
unsigned int mccr0;
divisor /= 32;
mccr0 = Ser4MCCR0 & ~0x00007f00;
mccr0 |= divisor << 8;
Ser4MCCR0 = mccr0;
}
static void
mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
{
unsigned int mccr0;
divisor /= 32;
mccr0 = Ser4MCCR0 & ~0x0000007f;
mccr0 |= divisor;
Ser4MCCR0 = mccr0;
}
/*
* Write data to the device. The bit should be set after 3 subframe
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
* We really should try doing something more productive while we
* wait.
*/
static void
mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
{
int ret = -ETIME;
int i;
Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
for (i = 0; i < 2; i++) {
udelay(mcp->rw_timeout);
if (Ser4MCSR & MCSR_CWC) {
ret = 0;
break;
}
}
if (ret < 0)
printk(KERN_WARNING "mcp: write timed out\n");
}
/*
* Read data from the device. The bit should be set after 3 subframe
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
* We really should try doing something more productive while we
* wait.
*/
static unsigned int
mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
{
int ret = -ETIME;
int i;
Ser4MCDR2 = reg << 17 | MCDR2_Rd;
for (i = 0; i < 2; i++) {
udelay(mcp->rw_timeout);
if (Ser4MCSR & MCSR_CRC) {
ret = Ser4MCDR2 & 0xffff;
break;
}
}
if (ret < 0)
printk(KERN_WARNING "mcp: read timed out\n");
return ret;
}
static void mcp_sa11x0_enable(struct mcp *mcp)
{
Ser4MCSR = -1;
Ser4MCCR0 |= MCCR0_MCE;
}
static void mcp_sa11x0_disable(struct mcp *mcp)
{
Ser4MCCR0 &= ~MCCR0_MCE;
}
/*
* Our methods.
*/
static struct mcp_ops mcp_sa11x0 = {
.set_telecom_divisor = mcp_sa11x0_set_telecom_divisor,
.set_audio_divisor = mcp_sa11x0_set_audio_divisor,
.reg_write = mcp_sa11x0_write,
.reg_read = mcp_sa11x0_read,
.enable = mcp_sa11x0_enable,
.disable = mcp_sa11x0_disable,
};
static int mcp_sa11x0_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct mcp_plat_data *data = pdev->dev.platform_data;
struct mcp *mcp;
int ret;
if (!data)
return -ENODEV;
if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
return -EBUSY;
mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
if (!mcp) {
ret = -ENOMEM;
goto release;
}
mcp->owner = THIS_MODULE;
mcp->ops = &mcp_sa11x0;
mcp->sclk_rate = data->sclk_rate;
mcp->dma_audio_rd = DMA_Ser4MCP0Rd;
mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
dev_set_drvdata(dev, mcp);
if (machine_is_assabet()) {
ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
}
/*
* Setup the PPC unit correctly.
*/
PPDR &= ~PPC_RXD4;
PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
PSDR |= PPC_RXD4;
PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
/*
* Initialise device. Note that we initially
* set the sampling rate to minimum.
*/
Ser4MCSR = -1;
Ser4MCCR1 = data->mccr1;
Ser4MCCR0 = data->mccr0 | 0x7f7f;
/*
* Calculate the read/write timeout (us) from the bit clock
* rate. This is the period for 3 64-bit frames. Always
* round this time up.
*/
mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
mcp->sclk_rate;
ret = mcp_host_register(mcp);
if (ret == 0)
goto out;
release:
release_mem_region(0x80060000, 0x60);
dev_set_drvdata(dev, NULL);
out:
return ret;
}
static int mcp_sa11x0_remove(struct device *dev)
{
struct mcp *mcp = dev_get_drvdata(dev);
dev_set_drvdata(dev, NULL);
mcp_host_unregister(mcp);
release_mem_region(0x80060000, 0x60);
return 0;
}
static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state)
{
struct mcp *mcp = dev_get_drvdata(dev);
priv(mcp)->mccr0 = Ser4MCCR0;
priv(mcp)->mccr1 = Ser4MCCR1;
Ser4MCCR0 &= ~MCCR0_MCE;
return 0;
}
static int mcp_sa11x0_resume(struct device *dev)
{
struct mcp *mcp = dev_get_drvdata(dev);
Ser4MCCR1 = priv(mcp)->mccr1;
Ser4MCCR0 = priv(mcp)->mccr0;
return 0;
}
/*
* The driver for the SA11x0 MCP port.
*/
static struct device_driver mcp_sa11x0_driver = {
.name = "sa11x0-mcp",
.bus = &platform_bus_type,
.probe = mcp_sa11x0_probe,
.remove = mcp_sa11x0_remove,
.suspend = mcp_sa11x0_suspend,
.resume = mcp_sa11x0_resume,
};
/*
* This needs re-working
*/
static int __init mcp_sa11x0_init(void)
{
return driver_register(&mcp_sa11x0_driver);
}
static void __exit mcp_sa11x0_exit(void)
{
driver_unregister(&mcp_sa11x0_driver);
}
module_init(mcp_sa11x0_init);
module_exit(mcp_sa11x0_exit);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
MODULE_LICENSE("GPL");