e72616f429
CY7C68310 chip also support cypress atacb "ATA command" pass_thru. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1808 lines
52 KiB
C
1808 lines
52 KiB
C
/* Driver for USB Mass Storage compliant devices
|
|
* Unusual Devices File
|
|
*
|
|
* $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
|
|
*
|
|
* Current development and maintenance by:
|
|
* (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
|
|
*
|
|
* Initial work by:
|
|
* (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
|
|
*
|
|
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
|
|
* information about this driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/* IMPORTANT NOTE: This file must be included in another file which does
|
|
* the following thing for it to work:
|
|
* The macro UNUSUAL_DEV() must be defined before this file is included
|
|
*/
|
|
|
|
/* If you edit this file, please try to keep it sorted first by VendorID,
|
|
* then by ProductID.
|
|
*
|
|
* If you want to add an entry for this file, be sure to include the
|
|
* following information:
|
|
* - a patch that adds the entry for your device, including your
|
|
* email address right above the entry (plus maybe a brief
|
|
* explanation of the reason for the entry),
|
|
* - a copy of /proc/bus/usb/devices with your device plugged in
|
|
* running with this patch.
|
|
* Send your submission to either Phil Dibowitz <phil@ipom.com> or
|
|
* Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
|
|
* USB development list <linux-usb@vger.kernel.org> and the USB storage list
|
|
* <usb-storage@lists.one-eyed-alien.net>
|
|
*/
|
|
|
|
/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
|
|
*/
|
|
UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
|
|
"ATMEL",
|
|
"SND1 Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE),
|
|
|
|
/* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */
|
|
UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200,
|
|
"Mitsumi",
|
|
"USB FDD",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Reported by Rodolfo Quesada <rquesada@roqz.net> */
|
|
UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003,
|
|
"VIA Technologies Inc.",
|
|
"Mitsumi multi cardreader",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
|
|
"HP",
|
|
"CD-Writer+",
|
|
US_SC_8070, US_PR_CB, NULL, 0),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_USBAT
|
|
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
|
|
"HP",
|
|
"CD-Writer+ 8200e",
|
|
US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
|
|
|
|
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
|
|
"HP",
|
|
"CD-Writer+ CD-4e",
|
|
US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
|
|
#endif
|
|
|
|
/* Reported by Grant Grundler <grundler@parisc-linux.org>
|
|
* HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
|
|
*/
|
|
UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
|
|
"HP",
|
|
"PhotoSmart R707",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
|
|
* and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
|
|
* for USB floppies that need the SINGLE_LUN enforcement.
|
|
*/
|
|
UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999,
|
|
"NEC",
|
|
"NEC USB UF000x",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
|
|
UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
|
|
"VIA Technologies Inc.",
|
|
"USB 2.0 Card Reader",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
|
|
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
|
|
* always fails and confuses drive.
|
|
*/
|
|
UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
|
|
"Buffalo",
|
|
"DUB-P40G HDD",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
|
|
UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100,
|
|
"Samsung Info. Systems America, Inc.",
|
|
"MP3 Player",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Orgad Shaneh <orgads@gmail.com> */
|
|
UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100,
|
|
"Samsung", "MP3 Player",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Christian Leber <christian@leber.de> */
|
|
UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
|
|
"TrekStor",
|
|
"i.Beat 115 2.0",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
|
|
|
|
/* Reported by Stefan Werner <dustbln@gmx.de> */
|
|
UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
|
|
"TrekStor",
|
|
"i.Beat Joy 2.0",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
|
|
UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
|
|
"GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Andrew Nayenko <relan@bk.ru> */
|
|
UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
|
|
"Nokia",
|
|
"Nokia 6288",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_MAX_SECTORS_64 ),
|
|
|
|
/* Reported by Mario Rettig <mariorettig@web.de> */
|
|
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
|
|
"Nokia",
|
|
"Nokia 3250",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by <honkkis@gmail.com> */
|
|
UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100,
|
|
"Nokia",
|
|
"E70",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Jon Hart <Jon.Hart@web.de> */
|
|
UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100,
|
|
"Nokia",
|
|
"E60",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
|
|
* Einar Th. Einarsson <einarthered@gmail.com> */
|
|
UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
|
|
"Nokia",
|
|
"N91",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Jiri Slaby <jirislaby@gmail.com> and
|
|
* Rene C. Castberg <Rene@Castberg.org> */
|
|
UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100,
|
|
"Nokia",
|
|
"N80",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
|
|
UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100,
|
|
"Nokia",
|
|
"E61",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Bardur Arantsson <bardur@scientician.net> */
|
|
UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610,
|
|
"Nokia",
|
|
"6131",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_MAX_SECTORS_64 ),
|
|
|
|
/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
|
|
UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
|
|
"Nokia",
|
|
"Nokia 6233",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_MAX_SECTORS_64 ),
|
|
|
|
/* Reported by Alex Corcoles <alex@corcoles.net> */
|
|
UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
|
|
"Nokia",
|
|
"6234",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_MAX_SECTORS_64 ),
|
|
|
|
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
|
|
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
|
|
"SMSC",
|
|
"FDC GOLD-2.30",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DPCM
|
|
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
|
|
"Microtech",
|
|
"CameraMate (DPCM_USB)",
|
|
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
|
|
#endif
|
|
|
|
/* Patch submitted by Daniel Drake <dsd@gentoo.org>
|
|
* Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
|
|
UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
|
|
"Neuros Audio",
|
|
"USB 2.0 HD 2.5",
|
|
US_SC_DEVICE, US_PR_BULK, NULL,
|
|
US_FL_NEED_OVERRIDE ),
|
|
|
|
/*
|
|
* Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
|
|
* The key does not actually break, but it returns zero sense which
|
|
* makes our SCSI stack to print confusing messages.
|
|
*/
|
|
UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
|
|
"USBest Technology", /* sold by Transcend */
|
|
"USB Mass Storage Device",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
|
|
|
|
/*
|
|
* Bohdan Linda <bohdan.linda@gmail.com>
|
|
* 1GB USB sticks MyFlash High Speed. I have restricted
|
|
* the revision to my model only
|
|
*/
|
|
UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
|
|
"USB 2.0",
|
|
"Flash Disk",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_NOT_LOCKABLE ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_KARMA
|
|
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
|
|
"Rio",
|
|
"Rio Karma",
|
|
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
|
|
#endif
|
|
|
|
/*
|
|
* This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
|
|
* Reported by Pete Zaitcev <zaitcev@redhat.com>
|
|
* This device chokes on both version of MODE SENSE which we have, so
|
|
* use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
|
|
*/
|
|
UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
|
|
"AMI",
|
|
"Virtual Floppy",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_NO_WP_DETECT),
|
|
|
|
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
|
|
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
|
|
"Kyocera",
|
|
"Finecam S3x",
|
|
US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
|
|
|
|
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
|
|
UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
|
|
"Kyocera",
|
|
"Finecam S4",
|
|
US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
|
|
|
|
/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
|
|
UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
|
|
"Kyocera",
|
|
"Finecam S5",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
|
|
|
|
/* Reported by Paul Stewart <stewart@wetlogic.net>
|
|
* This entry is needed because the device reports Sub=ff */
|
|
UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
|
|
"Hitachi",
|
|
"DVD-CAM DZ-MV100A Camcorder",
|
|
US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
|
|
|
|
/* Patch for Nikon coolpix 2000
|
|
* Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
|
|
UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
|
|
"NIKON",
|
|
"NIKON DSC E2000",
|
|
US_SC_DEVICE, US_PR_DEVICE,NULL,
|
|
US_FL_NOT_LOCKABLE ),
|
|
|
|
/* Reported by Stefan de Konink <skinkie@xs4all.nl> */
|
|
UNUSUAL_DEV( 0x04b0, 0x0401, 0x0200, 0x0200,
|
|
"NIKON",
|
|
"NIKON DSC D100",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
|
|
UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100,
|
|
"NIKON",
|
|
"NIKON DSC D50",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Andreas Bockhold <andreas@bockionline.de> */
|
|
UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100,
|
|
"NIKON",
|
|
"NIKON DSC D70",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Jamie Kitson <jamie@staberinde.fsnet.co.uk> */
|
|
UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100,
|
|
"NIKON",
|
|
"NIKON DSC D70s",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
|
|
UNUSUAL_DEV( 0x04b0, 0x040f, 0x0100, 0x0200,
|
|
"NIKON",
|
|
"NIKON DSC D200",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Emil Larsson <emil@swip.net> */
|
|
UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0110,
|
|
"NIKON",
|
|
"NIKON DSC D80",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Ortwin Glueck <odi@odi.ch> */
|
|
UNUSUAL_DEV( 0x04b0, 0x0413, 0x0110, 0x0110,
|
|
"NIKON",
|
|
"NIKON DSC D40",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Paul Check <paul@openstreet.com> */
|
|
UNUSUAL_DEV( 0x04b0, 0x0415, 0x0100, 0x0100,
|
|
"NIKON",
|
|
"NIKON DSC D2Xs",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Shan Destromp (shansan@gmail.com) */
|
|
UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100,
|
|
"NIKON",
|
|
"NIKON DSC D40X",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/* Reported by Doug Maxey (dwm@austin.ibm.com) */
|
|
UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
|
|
"IBM",
|
|
"IBM RSA2",
|
|
US_SC_DEVICE, US_PR_CB, NULL,
|
|
US_FL_MAX_SECTORS_MIN),
|
|
|
|
/* BENQ DC5330
|
|
* Reported by Manuel Fombuena <mfombuena@ya.com> and
|
|
* Frank Copeland <fjc@thingy.apana.org.au> */
|
|
UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
|
|
"Tekom Technologies, Inc",
|
|
"300_CAMERA",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
|
|
/* CY7C68300 : support atacb */
|
|
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
|
|
"Cypress",
|
|
"Cypress AT2LP",
|
|
US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
|
|
0),
|
|
|
|
/* CY7C68310 : support atacb and atacb2 */
|
|
UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
|
|
"Cypress",
|
|
"Cypress ISD-300LP",
|
|
US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
|
|
0),
|
|
#endif
|
|
|
|
/* Reported by Simon Levitt <simon@whattf.com>
|
|
* This entry needs Sub and Proto fields */
|
|
UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
|
|
"Epson",
|
|
"875DC Storage",
|
|
US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
|
|
|
|
/* Reported by Khalid Aziz <khalid@gonehiking.org>
|
|
* This entry is needed because the device reports Sub=ff */
|
|
UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
|
|
"Epson",
|
|
"785EPX Storage",
|
|
US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
|
|
|
|
/* Not sure who reported this originally but
|
|
* Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
|
|
* flag be added */
|
|
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
|
|
"Fujifilm",
|
|
"FinePix 1400Zoom",
|
|
US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
|
|
|
|
/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
|
|
* The device needs the flags only.
|
|
*/
|
|
UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
|
|
"ScanLogic",
|
|
"SL11R-IDE",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY),
|
|
|
|
/* Reported by Kriston Fincher <kriston@airmail.net>
|
|
* Patch submitted by Sean Millichamp <sean@bruenor.org>
|
|
* This is to support the Panasonic PalmCam PV-SD4090
|
|
* This entry is needed because the device reports Sub=ff
|
|
*/
|
|
UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
|
|
"Panasonic",
|
|
"LS-120 Camera",
|
|
US_SC_UFI, US_PR_DEVICE, NULL, 0),
|
|
|
|
/* From Yukihiro Nakai, via zaitcev@yahoo.com.
|
|
* This is needed for CB instead of CBI */
|
|
UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
|
|
"Sharp CE-CW05",
|
|
"CD-R/RW Drive",
|
|
US_SC_8070, US_PR_CB, NULL, 0),
|
|
|
|
/* Reported by Adriaan Penning <a.penning@luon.net> */
|
|
UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
|
|
"Panasonic",
|
|
"DMC-LCx Camera",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
|
|
|
|
/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
|
|
UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
|
|
"LEICA",
|
|
"D-LUX Camera",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
|
|
|
|
/* Most of the following entries were developed with the help of
|
|
* Shuttle/SCM directly.
|
|
*/
|
|
UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
|
|
"Matshita",
|
|
"LS-120",
|
|
US_SC_8020, US_PR_CB, NULL, 0),
|
|
|
|
UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
|
|
"Shuttle",
|
|
"eUSCSI Bridge",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
|
|
US_FL_SCM_MULT_TARG ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_SDDR09
|
|
UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
|
|
"Sandisk",
|
|
"ImageMate SDDR09",
|
|
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
|
|
0),
|
|
|
|
/* This entry is from Andries.Brouwer@cwi.nl */
|
|
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
|
|
"SCM Microsystems",
|
|
"eUSB SmartMedia / CompactFlash Adapter",
|
|
US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
|
|
0),
|
|
#endif
|
|
|
|
/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
|
|
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
|
|
"SCM Microsystems Inc.",
|
|
"eUSB MMC Adapter",
|
|
US_SC_SCSI, US_PR_CB, NULL,
|
|
US_FL_SINGLE_LUN),
|
|
|
|
/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
|
|
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
|
|
"Shuttle",
|
|
"eUSB MMC Adapter",
|
|
US_SC_SCSI, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN),
|
|
|
|
UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
|
|
"Sony",
|
|
"Hifd",
|
|
US_SC_SCSI, US_PR_CB, NULL,
|
|
US_FL_SINGLE_LUN),
|
|
|
|
UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
|
|
"Shuttle",
|
|
"eUSB ATA/ATAPI Adapter",
|
|
US_SC_8020, US_PR_CB, NULL, 0),
|
|
|
|
UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
|
|
"Shuttle",
|
|
"eUSB CompactFlash Adapter",
|
|
US_SC_8020, US_PR_CB, NULL, 0),
|
|
|
|
UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
|
|
"Shuttle",
|
|
"eUSCSI Bridge",
|
|
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
|
|
US_FL_SCM_MULT_TARG ),
|
|
|
|
UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
|
|
"Shuttle",
|
|
"eUSCSI Bridge",
|
|
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
|
|
US_FL_SCM_MULT_TARG ),
|
|
|
|
UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
|
|
"Shuttle",
|
|
"CD-RW Device",
|
|
US_SC_8020, US_PR_CB, NULL, 0),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_USBAT
|
|
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
|
|
"Shuttle/SCM",
|
|
"USBAT-02",
|
|
US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
|
|
US_FL_SINGLE_LUN),
|
|
#endif
|
|
|
|
/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
|
|
UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
|
|
"Samsung",
|
|
"YP-U3",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_MAX_SECTORS_64),
|
|
|
|
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
|
|
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and
|
|
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
|
|
*/
|
|
UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
|
|
"Kobian Mercury",
|
|
"Binocam DCB-132",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_BULK32),
|
|
|
|
/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
|
|
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
|
|
"Belkin",
|
|
"USB SCSI Adaptor",
|
|
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
|
|
US_FL_SCM_MULT_TARG ),
|
|
|
|
/* Iomega Clik! Drive
|
|
* Reported by David Chatenay <dchatenay@hotmail.com>
|
|
* The reason this is needed is not fully known.
|
|
*/
|
|
UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
|
|
"Iomega",
|
|
"USB Clik! 40",
|
|
US_SC_8070, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* Yakumo Mega Image 37
|
|
* Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
|
|
UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
|
|
"Tekom Technologies, Inc",
|
|
"300_CAMERA",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Another Yakumo camera.
|
|
* Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
|
|
UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
|
|
"Tekom Technologies, Inc",
|
|
"300_CAMERA",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
|
|
UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
|
|
"Tekom Technologies, Inc",
|
|
"300_CAMERA",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Yakumo Mega Image 47
|
|
* Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
|
|
UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
|
|
"Tekom Technologies, Inc",
|
|
"400_CAMERA",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Paul Ortyl <ortylp@3miasto.net>
|
|
* Note that it's similar to the device above, only different prodID */
|
|
UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
|
|
"Tekom Technologies, Inc",
|
|
"400_CAMERA",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
|
|
"Sony",
|
|
"DSC-S30/S70/S75/505V/F505/F707/F717/P8",
|
|
US_SC_SCSI, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
|
|
|
|
/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
|
|
* This entry is needed because the device reports Sub=ff */
|
|
UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610,
|
|
"Sony",
|
|
"DSC-T1/T5/H5",
|
|
US_SC_8070, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
|
|
/* Reported by wim@geeks.nl */
|
|
UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
|
|
"Sony",
|
|
"Memorystick NW-MS7",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_ISD200
|
|
UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
|
|
"Sony",
|
|
"Portable USB Harddrive V2",
|
|
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
|
|
0 ),
|
|
#endif
|
|
|
|
/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
|
|
UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
|
|
"Sony",
|
|
"USB Floppy Drive",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
|
|
"Sony",
|
|
"Memorystick MSAC-US1",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
|
|
UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
|
|
"Sony",
|
|
"Handycam",
|
|
US_SC_SCSI, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
|
|
UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
|
|
"Sony",
|
|
"Handycam HC-85",
|
|
US_SC_UFI, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
|
|
"Sony",
|
|
"Memorystick MSC-U01N",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Submitted by Michal Mlotek <mlotek@foobar.pl> */
|
|
UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
|
|
"Sony",
|
|
"PEG N760c Memorystick",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
|
|
"Sony",
|
|
"Memorystick MSC-U03",
|
|
US_SC_UFI, US_PR_CB, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Submitted by Nathan Babb <nathan@lexi.com> */
|
|
UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
|
|
"Sony",
|
|
"PEG Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
|
|
UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
|
|
"Sony",
|
|
"PEG Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
|
|
UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
|
|
"Sony",
|
|
"PEG Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* floppy reports multiple luns */
|
|
UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
|
|
"SAMSUNG",
|
|
"SFD-321U [FW 0C]",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
|
|
UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
|
|
"Y-E Data",
|
|
"Flashbuster-U",
|
|
US_SC_DEVICE, US_PR_CB, NULL,
|
|
US_FL_SINGLE_LUN),
|
|
|
|
UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
|
|
"Y-E Data",
|
|
"Flashbuster-U",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN),
|
|
|
|
/* Reported by Johann Cardon <johann.cardon@free.fr>
|
|
* This entry is needed only because the device reports
|
|
* bInterfaceClass = 0xff (vendor-specific)
|
|
*/
|
|
UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
|
|
"Y-E Data",
|
|
"Silicon Media R/W",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_ALAUDA
|
|
UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
|
|
"Fujifilm",
|
|
"DPC-R1 (Alauda)",
|
|
US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
|
|
#endif
|
|
|
|
/* Reported by RTE <raszilki@yandex.ru> */
|
|
UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
|
|
"JetFlash",
|
|
"TS1GJF2A/120",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_MAX_SECTORS_64 ),
|
|
|
|
/* Fabrizio Fellini <fello@libero.it> */
|
|
UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
|
|
"Fujifilm",
|
|
"Digital Camera EX-20 DSC",
|
|
US_SC_8070, US_PR_DEVICE, NULL, 0 ),
|
|
|
|
/* Reported by Andre Welter <a.r.welter@gmx.de>
|
|
* This antique device predates the release of the Bulk-only Transport
|
|
* spec, and if it gets a Get-Max-LUN then it requires the host to do a
|
|
* Clear-Halt on the bulk endpoints. The SINGLE_LUN flag will prevent
|
|
* us from sending the request.
|
|
*/
|
|
UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
|
|
"Iomega",
|
|
"ZIP 100",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Reported by <Hendryk.Pfeiffer@gmx.de> */
|
|
UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
|
|
"LaCie",
|
|
"DVD+-RW",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_GO_SLOW ),
|
|
|
|
/* Submitted by Joel Bourquard <numlock@freesurf.ch>
|
|
* Some versions of this device need the SubClass and Protocol overrides
|
|
* while others don't.
|
|
*/
|
|
UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
|
|
"In-System",
|
|
"PyroGate External CD-ROM Enclosure (FCD-523)",
|
|
US_SC_SCSI, US_PR_BULK, NULL,
|
|
US_FL_NEED_OVERRIDE ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_ISD200
|
|
UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
|
|
"In-System",
|
|
"USB/IDE Bridge (ATA/ATAPI)",
|
|
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
|
|
0 ),
|
|
|
|
UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
|
|
"In-System",
|
|
"Portable USB Harddrive V2",
|
|
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
|
|
0 ),
|
|
|
|
UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
|
|
"In-System",
|
|
"Portable USB Harddrive V2",
|
|
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
|
|
0 ),
|
|
|
|
UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
|
|
"In-System",
|
|
"USB Storage Adapter V2",
|
|
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
|
|
0 ),
|
|
#endif
|
|
|
|
/* Submitted by Sven Anderson <sven-linux@anderson.de>
|
|
* There are at least four ProductIDs used for iPods, so I added 0x1202 and
|
|
* 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
|
|
* to change with firmware updates, I changed the range to maximum for all
|
|
* iPod entries.
|
|
*/
|
|
UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
|
|
"Apple",
|
|
"iPod",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Avi Kivity <avi@argo.co.il> */
|
|
UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
|
|
"Apple",
|
|
"iPod",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
|
|
"Apple",
|
|
"iPod",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
|
|
|
|
UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
|
|
"Apple",
|
|
"iPod",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
/*
|
|
* Reported by Tyson Vinson <lornoss@gmail.com>
|
|
* This particular productId is the iPod Nano
|
|
*/
|
|
UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
|
|
"Apple",
|
|
"iPod",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
|
|
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
|
|
"Lexar",
|
|
"Jumpshot USB CF Reader",
|
|
US_SC_SCSI, US_PR_JUMPSHOT, NULL,
|
|
US_FL_NEED_OVERRIDE ),
|
|
#endif
|
|
|
|
/* Reported by Blake Matheny <bmatheny@purdue.edu> */
|
|
UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
|
|
"Lexar",
|
|
"USB CF Reader",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* The following two entries are for a Genesys USB to IDE
|
|
* converter chip, but it changes its ProductId depending
|
|
* on whether or not a disk or an optical device is enclosed
|
|
* They were originally reported by Alexander Oltu
|
|
* <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
|
|
* respectively.
|
|
*
|
|
* US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
|
|
* <phil@ipom.com> as these flags were made and hard-coded
|
|
* special-cases were pulled from scsiglue.c.
|
|
*/
|
|
UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
|
|
"Genesys Logic",
|
|
"USB to IDE Optical",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
|
|
|
|
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
|
|
"Genesys Logic",
|
|
"USB to IDE Disk",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
|
|
|
|
/* Reported by Hanno Boeck <hanno@gmx.de>
|
|
* Taken from the Lycoris Kernel */
|
|
UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
|
|
"Vivitar",
|
|
"Vivicam 35Xx",
|
|
US_SC_SCSI, US_PR_BULK, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
|
|
"TEAC",
|
|
"Floppy Drive",
|
|
US_SC_UFI, US_PR_CB, NULL, 0 ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_SDDR09
|
|
UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
|
|
"Olympus",
|
|
"Camedia MAUSB-2",
|
|
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
|
|
0),
|
|
#endif
|
|
|
|
/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
|
|
UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
|
|
"SigmaTel",
|
|
"USBMSC Audio Player",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
|
|
UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
|
|
"Prolific Technology Inc.",
|
|
"Mass Storage Device",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
|
|
|
|
/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
|
|
UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
|
|
"Prolific Technology Inc.",
|
|
"ATAPI-6 Bridge Controller",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
|
|
|
|
/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
|
|
UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
|
|
"Minolta",
|
|
"Dimage F300",
|
|
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
|
|
|
|
/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
|
|
UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
|
|
"Minolta",
|
|
"DIMAGE E223",
|
|
US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
|
|
|
|
UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
|
|
"Hagiwara",
|
|
"Flashgate",
|
|
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
|
|
|
|
/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
|
|
UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
|
|
"Thomson Multimedia Inc.",
|
|
"RCA RD1080 MP3 Player",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
|
|
* This USB MP3/AVI player device fails and disconnects if more than 128
|
|
* sectors (64kB) are read/written in a single command, and may be present
|
|
* at least in the following products:
|
|
* "Magnex Digital Video Panel DVP 1800"
|
|
* "MP4 AIGO 4GB SLOT SD"
|
|
* "Teclast TL-C260 MP3"
|
|
* "i.Meizu PMP MP3/MP4"
|
|
* "Speed MV8 MP4 Audio Player"
|
|
*/
|
|
UNUSUAL_DEV( 0x071b, 0x3203, 0x0100, 0x0100,
|
|
"RockChip",
|
|
"ROCK MP3",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_MAX_SECTORS_64),
|
|
|
|
/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
|
|
UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100,
|
|
"ATMEL",
|
|
"SND1 Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE),
|
|
|
|
/* Submitted by Roman Hodek <roman@hodek.net> */
|
|
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
|
|
"Sandisk",
|
|
"ImageMate SDDR-05a",
|
|
US_SC_SCSI, US_PR_CB, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
|
|
"SanDisk Corporation",
|
|
"ImageMate CompactFlash USB",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_USBAT
|
|
UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
|
|
"Sandisk",
|
|
"ImageMate SDDR-05b",
|
|
US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
|
|
US_FL_SINGLE_LUN ),
|
|
#endif
|
|
|
|
UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
|
|
"Sandisk",
|
|
"ImageMate SDDR-12",
|
|
US_SC_SCSI, US_PR_CB, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_SDDR09
|
|
UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
|
|
"Sandisk",
|
|
"ImageMate SDDR-09",
|
|
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
|
|
0),
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE_FREECOM
|
|
UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
|
|
"Freecom",
|
|
"USB-IDE",
|
|
US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
|
|
#endif
|
|
|
|
/* Reported by Eero Volotinen <eero@ping-viini.org> */
|
|
UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
|
|
"Freecom Technologies",
|
|
"FHD-Classic",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
|
|
"Microtech",
|
|
"USB-SCSI-DB25",
|
|
US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
|
|
US_FL_SCM_MULT_TARG ),
|
|
|
|
UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
|
|
"Microtech",
|
|
"USB-SCSI-HD50",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
|
|
US_FL_SCM_MULT_TARG ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DPCM
|
|
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
|
|
"Microtech",
|
|
"CameraMate (DPCM_USB)",
|
|
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE_ALAUDA
|
|
UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
|
|
"Olympus",
|
|
"MAUSB-10 (Alauda)",
|
|
US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DATAFAB
|
|
UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
|
|
"Datafab",
|
|
"MDCFE-B USB CF Reader",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
|
|
/*
|
|
* The following Datafab-based devices may or may not work
|
|
* using the current driver...the 0xffff is arbitrary since I
|
|
* don't know what device versions exist for these guys.
|
|
*
|
|
* The 0xa003 and 0xa004 devices in particular I'm curious about.
|
|
* I'm told they exist but so far nobody has come forward to say that
|
|
* they work with this driver. Given the success we've had getting
|
|
* other Datafab-based cards operational with this driver, I've decided
|
|
* to leave these two devices in the list.
|
|
*/
|
|
UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
|
|
"SIIG/Datafab",
|
|
"SIIG/Datafab Memory Stick+CF Reader/Writer",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
|
|
/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
|
|
UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
|
|
"Datafab/Unknown",
|
|
"MD2/MD3 Disk enclosure",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
|
|
"Datafab/Unknown",
|
|
"Datafab-based Reader",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
|
|
UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
|
|
"Datafab/Unknown",
|
|
"Datafab-based Reader",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
|
|
UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
|
|
"PNY/Datafab",
|
|
"PNY/Datafab CF+SM Reader",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
|
|
UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
|
|
"Simple Tech/Datafab",
|
|
"Simple Tech/Datafab CF+SM Reader",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE_SDDR55
|
|
/* Contributed by Peter Waechtler */
|
|
UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
|
|
"Datafab",
|
|
"MDSM-B reader",
|
|
US_SC_SCSI, US_PR_SDDR55, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DATAFAB
|
|
/* Submitted by Olaf Hering <olh@suse.de> */
|
|
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
|
|
"Datafab Systems, Inc.",
|
|
"USB to CF + SM Combo (LC1)",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
#endif
|
|
#ifdef CONFIG_USB_STORAGE_SDDR55
|
|
/* SM part - aeb <Andries.Brouwer@cwi.nl> */
|
|
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
|
|
"Datafab Systems, Inc.",
|
|
"USB to CF + SM Combo (LC1)",
|
|
US_SC_SCSI, US_PR_SDDR55, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DATAFAB
|
|
/* Reported by Felix Moeller <felix@derklecks.de>
|
|
* in Germany this is sold by Hama with the productnumber 46952
|
|
* as "DualSlot CompactFlash(TM) & MStick Drive USB"
|
|
*/
|
|
UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff,
|
|
"DataFab Systems Inc.",
|
|
"USB CF+MS",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
0 ),
|
|
|
|
#endif
|
|
|
|
/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
|
|
* Only revision 1.13 tested (same for all of the above devices,
|
|
* based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
|
|
* Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
|
|
* See also http://martin.wilck.bei.t-online.de/#kecf .
|
|
*/
|
|
UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
|
|
"Datafab",
|
|
"KECF-USB",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
|
|
* to the USB storage specification in two ways:
|
|
* - They tell us they are using transport protocol CBI. In reality they
|
|
* are using transport protocol CB.
|
|
* - They don't like the INQUIRY command. So we must handle this command
|
|
* of the SCSI layer ourselves.
|
|
* - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
|
|
* bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
|
|
* So don't remove the US_PR_CB override!
|
|
* - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
|
|
*/
|
|
UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
|
|
"Casio",
|
|
"QV DigitalCamera",
|
|
US_SC_8070, US_PR_CB, NULL,
|
|
US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
|
|
|
|
/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
|
|
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
|
|
"Samsung",
|
|
"Digimax 410",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY),
|
|
|
|
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
|
|
* Flag will support Bulk devices which use a standards-violating 32-byte
|
|
* Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
|
|
* Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
|
|
*/
|
|
|
|
UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
|
|
"Grandtech",
|
|
"DC2MEGA",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_BULK32),
|
|
|
|
/* Andrew Lunn <andrew@lunn.ch>
|
|
* PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
|
|
* on LUN 4.
|
|
* Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
|
|
*/
|
|
UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
|
|
"PanDigital",
|
|
"Photo Frame",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_NOT_LOCKABLE),
|
|
|
|
/* Submitted by Jan De Luyck <lkml@kcore.org> */
|
|
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
|
|
"CITIZEN",
|
|
"X1DE-USB",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN),
|
|
|
|
/* Submitted by Dylan Taft <d13f00l@gmail.com>
|
|
* US_FL_IGNORE_RESIDUE Needed
|
|
*/
|
|
UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
|
|
"AIPTEK",
|
|
"Aiptek USB Keychain MP3 Player",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE),
|
|
|
|
/* Entry needed for flags. Moreover, all devices with this ID use
|
|
* bulk-only transport, but _some_ falsely report Control/Bulk instead.
|
|
* One example is "Trumpion Digital Research MYMP3".
|
|
* Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
|
|
*/
|
|
UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
|
|
"Trumpion",
|
|
"t33520 USB Flash Card Controller",
|
|
US_SC_DEVICE, US_PR_BULK, NULL,
|
|
US_FL_NEED_OVERRIDE ),
|
|
|
|
/* Reported by Filippo Bardelli <filibard@libero.it>
|
|
* The device reports a subclass of RBC, which is wrong.
|
|
*/
|
|
UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
|
|
"Trumpion Microelectronics, Inc.",
|
|
"33520 USB Digital Voice Recorder",
|
|
US_SC_UFI, US_PR_DEVICE, NULL,
|
|
0),
|
|
|
|
/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
|
|
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
|
|
"Trumpion",
|
|
"MP3 player",
|
|
US_SC_RBC, US_PR_BULK, NULL,
|
|
0 ),
|
|
|
|
/* aeb */
|
|
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
|
|
"Feiya",
|
|
"5-in-1 Card Reader",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
/* This Pentax still camera is not conformant
|
|
* to the USB storage specification: -
|
|
* - It does not like the INQUIRY command. So we must handle this command
|
|
* of the SCSI layer ourselves.
|
|
* Tested on Rev. 10.00 (0x1000)
|
|
* Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
|
|
*/
|
|
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
|
|
"Pentax",
|
|
"Optio 2/3/400",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
|
|
/* Submitted by Per Winkvist <per.winkvist@uk.com> */
|
|
UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
|
|
"Pentax",
|
|
"Optio S/S4",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* These are virtual windows driver CDs, which the zd1211rw driver
|
|
* automatically converts into WLAN devices. */
|
|
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
|
|
"ZyXEL",
|
|
"G-220F USB-WLAN Install",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_DEVICE ),
|
|
|
|
UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
|
|
"SiteCom",
|
|
"WL-117 USB-WLAN Install",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_DEVICE ),
|
|
|
|
/* Reported by F. Aben <f.aben@option.com>
|
|
* This device (wrongly) has a vendor-specific device descriptor.
|
|
* The entry is needed so usb-storage can bind to it's mass-storage
|
|
* interface as an interface driver */
|
|
UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
|
|
"Option",
|
|
"GI 0401 SD-Card",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
0 ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_ISD200
|
|
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
|
|
"ATI",
|
|
"USB Cable 205",
|
|
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
|
|
0 ),
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE_DATAFAB
|
|
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
|
|
"Acomdata",
|
|
"CF",
|
|
US_SC_SCSI, US_PR_DATAFAB, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
#endif
|
|
#ifdef CONFIG_USB_STORAGE_SDDR55
|
|
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
|
|
"Acomdata",
|
|
"SM",
|
|
US_SC_SCSI, US_PR_SDDR55, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
#endif
|
|
|
|
/* Submitted by: Nick Sillik <n.sillik@temple.edu>
|
|
* Needed for OneTouch extension to usb-storage
|
|
*
|
|
*/
|
|
#ifdef CONFIG_USB_STORAGE_ONETOUCH
|
|
UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999,
|
|
"Maxtor",
|
|
"OneTouch External Harddrive",
|
|
US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
|
|
0),
|
|
UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
|
|
"Maxtor",
|
|
"OneTouch External Harddrive",
|
|
US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
|
|
0),
|
|
#endif
|
|
|
|
/*
|
|
* Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
|
|
* The device blatantly ignores LUN and returns 1 in GetMaxLUN.
|
|
*/
|
|
UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
|
|
"Unknown",
|
|
"Unknown",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_SINGLE_LUN ),
|
|
|
|
/* Submitted by Joris Struyve <joris@struyve.be> */
|
|
UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
|
|
"Medion",
|
|
"MD 7425",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY),
|
|
|
|
/*
|
|
* Entry for Jenoptik JD 5200z3
|
|
*
|
|
* email: car.busse@gmx.de
|
|
*/
|
|
UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
|
|
"Jenoptik",
|
|
"JD 5200 z3",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
|
|
|
|
/* Reported by Lubomir Blaha <tritol@trilogic.cz>
|
|
* I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
|
|
* works for me. Can anybody correct these values? (I able to test corrected
|
|
* version.)
|
|
*/
|
|
UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
|
|
"Netac",
|
|
"USB-CF-Card",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* Reported by Edward Chapman (taken from linux-usb mailing list)
|
|
Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
|
|
UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
|
|
"Netac",
|
|
"USB Flash Disk",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
|
|
/* Patch by Stephan Walter <stephan.walter@epfl.ch>
|
|
* I don't know why, but it works... */
|
|
UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
|
|
"WINWARD",
|
|
"Music Disk",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
|
|
UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
|
|
"PNP_MP3",
|
|
"PNP_MP3 PLAYER",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
|
|
UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
|
|
"Cowon Systems",
|
|
"iAUDIO M5",
|
|
US_SC_DEVICE, US_PR_BULK, NULL,
|
|
US_FL_NEED_OVERRIDE ),
|
|
|
|
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
|
|
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
|
|
"USB",
|
|
"Solid state disk",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY ),
|
|
|
|
/* Submitted by Daniel Drake <dsd@gentoo.org>
|
|
* Reported by dayul on the Gentoo Forums */
|
|
UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
|
|
"Ours Technology",
|
|
"Flash Disk",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
|
|
UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
|
|
"USB",
|
|
"Flash Disk",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Benjamin Schiller <sbenni@gmx.de>
|
|
* It is also sold by Easylite as DJ 20 */
|
|
UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103,
|
|
"Typhoon",
|
|
"My DJ 1820",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
|
|
|
|
/* Patch by Leonid Petrov mail at lpetrov.net
|
|
* Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
|
|
* http://www.qbik.ch/usb/devices/showdev.php?id=1705
|
|
* Updated to 103 device by MJ Ray mjr at phonecoop.coop
|
|
*/
|
|
UNUSUAL_DEV( 0x0f19, 0x0103, 0x0100, 0x0100,
|
|
"Oracom Co., Ltd",
|
|
"ORC-200M",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* David Kuehling <dvdkhlng@gmx.de>:
|
|
* for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI
|
|
* errors when trying to write.
|
|
*/
|
|
UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
|
|
"C-MEX",
|
|
"A-VOX",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Jeremy Katz <katzj@redhat.com>:
|
|
* The Blackberry Pearl can run in two modes; a usb-storage only mode
|
|
* and a mode that allows access via mass storage and to its database.
|
|
* The berry_charge module will set the device to dual mode and thus we
|
|
* should ignore its native mode if that module is built
|
|
*/
|
|
#ifdef CONFIG_USB_BERRY_CHARGE
|
|
UNUSUAL_DEV( 0x0fca, 0x0006, 0x0001, 0x0001,
|
|
"RIM",
|
|
"Blackberry Pearl",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_DEVICE ),
|
|
#endif
|
|
|
|
/* Reported by Michael Stattmann <michael@stattmann.com> */
|
|
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
|
|
"Sony Ericsson",
|
|
"V800-Vodafone 802",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_NO_WP_DETECT ),
|
|
|
|
/* Reported by Jan Mate <mate@fiit.stuba.sk>
|
|
* and by Soeren Sonnenburg <kernel@nn7.de> */
|
|
UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
|
|
"Sony Ericsson",
|
|
"P990i",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
|
|
UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
|
|
"Sony Ericsson",
|
|
"P1i",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
|
|
UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
|
|
"Sony Ericsson",
|
|
"M600i",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
|
|
|
|
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
|
|
* Tested on hardware version 1.10.
|
|
* Entry is needed only for the initializer function override.
|
|
* Devices with bcd > 110 seem to not need it while those
|
|
* with bcd < 110 appear to need it.
|
|
*/
|
|
UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
|
|
"Desknote",
|
|
"UCR-61S2B",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
|
|
0 ),
|
|
|
|
/* Reported by Fabio Venturi <f.venturi@tdnet.it>
|
|
* The device reports a vendor-specific bDeviceClass.
|
|
*/
|
|
UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
|
|
"Actions Semiconductor",
|
|
"Mtp device",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
0),
|
|
|
|
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
|
|
* Entry is needed for the initializer function override,
|
|
* which instructs the device to load as a modem
|
|
* device.
|
|
*/
|
|
UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999,
|
|
"Sierra Wireless",
|
|
"USB MMC Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_DEVICE),
|
|
|
|
/* Reported by Jaco Kroon <jaco@kroon.co.za>
|
|
* The usb-storage module found on the Digitech GNX4 (and supposedly other
|
|
* devices) misbehaves and causes a bunch of invalid I/O errors.
|
|
*/
|
|
UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
|
|
"Digitech HMG",
|
|
"DigiTech Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by fangxiaozhi <huananhu@huawei.com>
|
|
* This brings the HUAWEI data card devices into multi-port mode
|
|
*/
|
|
UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
|
|
"HUAWEI MOBILE",
|
|
"Mass Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
|
|
0),
|
|
|
|
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
|
|
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
|
|
"Minolta",
|
|
"Dimage Z10",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
0 ),
|
|
|
|
/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
|
|
UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
|
|
"SWISSBIT",
|
|
"Black Silver",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Francesco Foresti <frafore@tiscali.it> */
|
|
UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
|
|
"Super Top",
|
|
"IDE DEVICE",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Robert Schedel <r.schedel@yahoo.de>
|
|
* Note: this is a 'super top' device like the above 14cd/6600 device */
|
|
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
|
|
"Teac",
|
|
"HD-35PUK-B",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_RESIDUE ),
|
|
|
|
/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
|
|
* This entry is needed to bypass the ZeroCD mechanism
|
|
* and to properly load as a modem device.
|
|
*/
|
|
UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000,
|
|
"Onda ET502HS",
|
|
"USB MMC Storage",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_IGNORE_DEVICE),
|
|
|
|
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
|
|
* and Renato Perini <rperini@email.it>
|
|
*/
|
|
UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
|
|
"Motorola",
|
|
"RAZR V3x",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
|
|
|
|
/*
|
|
* Patch by Pete Zaitcev <zaitcev@redhat.com>
|
|
* Report by Mark Patton. Red Hat bz#208928.
|
|
* Added support for rev 0x0002 (Motorola ROKR W5)
|
|
* by Javier Smaldone <javier@smaldone.com.ar>
|
|
*/
|
|
UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002,
|
|
"Motorola",
|
|
"RAZR V3i/ROKR W5",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY),
|
|
|
|
/*
|
|
* Patch by Constantin Baranov <const@tltsu.ru>
|
|
* Report by Andreas Koenecke.
|
|
* Motorola ROKR Z6.
|
|
*/
|
|
UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
|
|
"Motorola",
|
|
"MSnc.",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
|
|
|
|
/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
|
|
UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
|
|
"MPIO",
|
|
"HS200",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_GO_SLOW ),
|
|
|
|
/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
|
|
UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
|
|
"INTOVA",
|
|
"Pixtreme",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_FIX_CAPACITY ),
|
|
|
|
/*
|
|
* David Härdeman <david@2gen.com>
|
|
* The key makes the SCSI stack print confusing (but harmless) messages
|
|
*/
|
|
UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100,
|
|
"Iomega",
|
|
"Micro Mini 1GB",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
|
|
|
|
#ifdef CONFIG_USB_STORAGE_SDDR55
|
|
UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
|
|
"Sandisk",
|
|
"ImageMate SDDR55",
|
|
US_SC_SCSI, US_PR_SDDR55, NULL,
|
|
US_FL_SINGLE_LUN),
|
|
#endif
|
|
|
|
/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
|
|
UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
|
|
"DataStor",
|
|
"USB4500 FW1.04",
|
|
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
|
US_FL_CAPACITY_HEURISTICS),
|
|
|
|
/* Control/Bulk transport for all SubClass values */
|
|
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
|
|
|
|
/* Control/Bulk/Interrupt transport for all SubClass values */
|
|
USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
|
|
|
|
/* Bulk-only transport for all SubClass values */
|
|
USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
|
|
USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),
|