4447d35156
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
1141 lines
31 KiB
C
1141 lines
31 KiB
C
/*
|
|
* sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
|
|
*
|
|
* Copyright 2005 Tejun Heo
|
|
*
|
|
* Based on preview driver from Silicon Image.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_sil24"
|
|
#define DRV_VERSION "0.8"
|
|
|
|
/*
|
|
* Port request block (PRB) 32 bytes
|
|
*/
|
|
struct sil24_prb {
|
|
__le16 ctrl;
|
|
__le16 prot;
|
|
__le32 rx_cnt;
|
|
u8 fis[6 * 4];
|
|
};
|
|
|
|
/*
|
|
* Scatter gather entry (SGE) 16 bytes
|
|
*/
|
|
struct sil24_sge {
|
|
__le64 addr;
|
|
__le32 cnt;
|
|
__le32 flags;
|
|
};
|
|
|
|
/*
|
|
* Port multiplier
|
|
*/
|
|
struct sil24_port_multiplier {
|
|
__le32 diag;
|
|
__le32 sactive;
|
|
};
|
|
|
|
enum {
|
|
SIL24_HOST_BAR = 0,
|
|
SIL24_PORT_BAR = 2,
|
|
|
|
/*
|
|
* Global controller registers (128 bytes @ BAR0)
|
|
*/
|
|
/* 32 bit regs */
|
|
HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
|
|
HOST_CTRL = 0x40,
|
|
HOST_IRQ_STAT = 0x44,
|
|
HOST_PHY_CFG = 0x48,
|
|
HOST_BIST_CTRL = 0x50,
|
|
HOST_BIST_PTRN = 0x54,
|
|
HOST_BIST_STAT = 0x58,
|
|
HOST_MEM_BIST_STAT = 0x5c,
|
|
HOST_FLASH_CMD = 0x70,
|
|
/* 8 bit regs */
|
|
HOST_FLASH_DATA = 0x74,
|
|
HOST_TRANSITION_DETECT = 0x75,
|
|
HOST_GPIO_CTRL = 0x76,
|
|
HOST_I2C_ADDR = 0x78, /* 32 bit */
|
|
HOST_I2C_DATA = 0x7c,
|
|
HOST_I2C_XFER_CNT = 0x7e,
|
|
HOST_I2C_CTRL = 0x7f,
|
|
|
|
/* HOST_SLOT_STAT bits */
|
|
HOST_SSTAT_ATTN = (1 << 31),
|
|
|
|
/* HOST_CTRL bits */
|
|
HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */
|
|
HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */
|
|
HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
|
|
HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
|
|
HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
|
|
HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */
|
|
|
|
/*
|
|
* Port registers
|
|
* (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
|
|
*/
|
|
PORT_REGS_SIZE = 0x2000,
|
|
|
|
PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */
|
|
PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
|
|
|
|
PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
|
|
PORT_PMP_STATUS = 0x0000, /* port device status offset */
|
|
PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */
|
|
PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */
|
|
|
|
/* 32 bit regs */
|
|
PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
|
|
PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
|
|
PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
|
|
PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
|
|
PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
|
|
PORT_ACTIVATE_UPPER_ADDR= 0x101c,
|
|
PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
|
|
PORT_CMD_ERR = 0x1024, /* command error number */
|
|
PORT_FIS_CFG = 0x1028,
|
|
PORT_FIFO_THRES = 0x102c,
|
|
/* 16 bit regs */
|
|
PORT_DECODE_ERR_CNT = 0x1040,
|
|
PORT_DECODE_ERR_THRESH = 0x1042,
|
|
PORT_CRC_ERR_CNT = 0x1044,
|
|
PORT_CRC_ERR_THRESH = 0x1046,
|
|
PORT_HSHK_ERR_CNT = 0x1048,
|
|
PORT_HSHK_ERR_THRESH = 0x104a,
|
|
/* 32 bit regs */
|
|
PORT_PHY_CFG = 0x1050,
|
|
PORT_SLOT_STAT = 0x1800,
|
|
PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
|
|
PORT_CONTEXT = 0x1e04,
|
|
PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
|
|
PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
|
|
PORT_SCONTROL = 0x1f00,
|
|
PORT_SSTATUS = 0x1f04,
|
|
PORT_SERROR = 0x1f08,
|
|
PORT_SACTIVE = 0x1f0c,
|
|
|
|
/* PORT_CTRL_STAT bits */
|
|
PORT_CS_PORT_RST = (1 << 0), /* port reset */
|
|
PORT_CS_DEV_RST = (1 << 1), /* device reset */
|
|
PORT_CS_INIT = (1 << 2), /* port initialize */
|
|
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
|
|
PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
|
|
PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */
|
|
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
|
|
PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */
|
|
PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
|
|
|
|
/* PORT_IRQ_STAT/ENABLE_SET/CLR */
|
|
/* bits[11:0] are masked */
|
|
PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
|
|
PORT_IRQ_ERROR = (1 << 1), /* command execution error */
|
|
PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
|
|
PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
|
|
PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
|
|
PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
|
|
PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */
|
|
PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */
|
|
PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */
|
|
PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */
|
|
PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
|
|
PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
|
|
|
|
DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
|
|
PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
|
|
PORT_IRQ_UNK_FIS,
|
|
|
|
/* bits[27:16] are unmasked (raw) */
|
|
PORT_IRQ_RAW_SHIFT = 16,
|
|
PORT_IRQ_MASKED_MASK = 0x7ff,
|
|
PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
|
|
|
|
/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
|
|
PORT_IRQ_STEER_SHIFT = 30,
|
|
PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
|
|
|
|
/* PORT_CMD_ERR constants */
|
|
PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
|
|
PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
|
|
PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
|
|
PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
|
|
PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
|
|
PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
|
|
PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
|
|
PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
|
|
PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
|
|
PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
|
|
PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
|
|
PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
|
|
PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
|
|
PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
|
|
PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
|
|
PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
|
|
PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
|
|
PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
|
|
PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
|
|
PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */
|
|
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
|
|
PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
|
|
|
|
/* bits of PRB control field */
|
|
PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
|
|
PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
|
|
PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
|
|
PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
|
|
PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
|
|
|
|
/* PRB protocol field */
|
|
PRB_PROT_PACKET = (1 << 0),
|
|
PRB_PROT_TCQ = (1 << 1),
|
|
PRB_PROT_NCQ = (1 << 2),
|
|
PRB_PROT_READ = (1 << 3),
|
|
PRB_PROT_WRITE = (1 << 4),
|
|
PRB_PROT_TRANSPARENT = (1 << 5),
|
|
|
|
/*
|
|
* Other constants
|
|
*/
|
|
SGE_TRM = (1 << 31), /* Last SGE in chain */
|
|
SGE_LNK = (1 << 30), /* linked list
|
|
Points to SGT, not SGE */
|
|
SGE_DRD = (1 << 29), /* discard data read (/dev/null)
|
|
data address ignored */
|
|
|
|
SIL24_MAX_CMDS = 31,
|
|
|
|
/* board id */
|
|
BID_SIL3124 = 0,
|
|
BID_SIL3132 = 1,
|
|
BID_SIL3131 = 2,
|
|
|
|
/* host flags */
|
|
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
|
|
ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
|
|
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
|
|
|
|
IRQ_STAT_4PORTS = 0xf,
|
|
};
|
|
|
|
struct sil24_ata_block {
|
|
struct sil24_prb prb;
|
|
struct sil24_sge sge[LIBATA_MAX_PRD];
|
|
};
|
|
|
|
struct sil24_atapi_block {
|
|
struct sil24_prb prb;
|
|
u8 cdb[16];
|
|
struct sil24_sge sge[LIBATA_MAX_PRD - 1];
|
|
};
|
|
|
|
union sil24_cmd_block {
|
|
struct sil24_ata_block ata;
|
|
struct sil24_atapi_block atapi;
|
|
};
|
|
|
|
static struct sil24_cerr_info {
|
|
unsigned int err_mask, action;
|
|
const char *desc;
|
|
} sil24_cerr_db[] = {
|
|
[0] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
|
|
"device error" },
|
|
[PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
|
|
"device error via D2H FIS" },
|
|
[PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
|
|
"device error via SDB FIS" },
|
|
[PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
|
|
"error in data FIS" },
|
|
[PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
|
|
"failed to transmit command FIS" },
|
|
[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"protocol mismatch" },
|
|
[PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"data directon mismatch" },
|
|
[PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"ran out of SGEs while writing" },
|
|
[PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"ran out of SGEs while reading" },
|
|
[PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"invalid data directon for ATAPI CDB" },
|
|
[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
|
|
"SGT no on qword boundary" },
|
|
[PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI target abort while fetching SGT" },
|
|
[PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI master abort while fetching SGT" },
|
|
[PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI parity error while fetching SGT" },
|
|
[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
|
|
"PRB not on qword boundary" },
|
|
[PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI target abort while fetching PRB" },
|
|
[PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI master abort while fetching PRB" },
|
|
[PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI parity error while fetching PRB" },
|
|
[PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"undefined error while transferring data" },
|
|
[PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI target abort while transferring data" },
|
|
[PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI master abort while transferring data" },
|
|
[PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI parity error while transferring data" },
|
|
[PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"FIS received while sending service FIS" },
|
|
};
|
|
|
|
/*
|
|
* ap->private_data
|
|
*
|
|
* The preview driver always returned 0 for status. We emulate it
|
|
* here from the previous interrupt.
|
|
*/
|
|
struct sil24_port_priv {
|
|
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
|
|
dma_addr_t cmd_block_dma; /* DMA base addr for them */
|
|
struct ata_taskfile tf; /* Cached taskfile registers */
|
|
};
|
|
|
|
static void sil24_dev_config(struct ata_device *dev);
|
|
static u8 sil24_check_status(struct ata_port *ap);
|
|
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
|
|
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
|
|
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void sil24_qc_prep(struct ata_queued_cmd *qc);
|
|
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
|
|
static void sil24_irq_clear(struct ata_port *ap);
|
|
static void sil24_freeze(struct ata_port *ap);
|
|
static void sil24_thaw(struct ata_port *ap);
|
|
static void sil24_error_handler(struct ata_port *ap);
|
|
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static int sil24_port_start(struct ata_port *ap);
|
|
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
#ifdef CONFIG_PM
|
|
static int sil24_pci_device_resume(struct pci_dev *pdev);
|
|
#endif
|
|
|
|
static const struct pci_device_id sil24_pci_tbl[] = {
|
|
{ PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
|
|
{ PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
|
|
{ PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
|
|
{ PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
|
|
{ PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
|
|
{ PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver sil24_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sil24_pci_tbl,
|
|
.probe = sil24_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = sil24_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static struct scsi_host_template sil24_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.change_queue_depth = ata_scsi_change_queue_depth,
|
|
.can_queue = SIL24_MAX_CMDS,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_scsi_device_suspend,
|
|
.resume = ata_scsi_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static const struct ata_port_operations sil24_ops = {
|
|
.port_disable = ata_port_disable,
|
|
|
|
.dev_config = sil24_dev_config,
|
|
|
|
.check_status = sil24_check_status,
|
|
.check_altstatus = sil24_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = sil24_tf_read,
|
|
|
|
.qc_prep = sil24_qc_prep,
|
|
.qc_issue = sil24_qc_issue,
|
|
|
|
.irq_clear = sil24_irq_clear,
|
|
.irq_on = ata_dummy_irq_on,
|
|
.irq_ack = ata_dummy_irq_ack,
|
|
|
|
.scr_read = sil24_scr_read,
|
|
.scr_write = sil24_scr_write,
|
|
|
|
.freeze = sil24_freeze,
|
|
.thaw = sil24_thaw,
|
|
.error_handler = sil24_error_handler,
|
|
.post_internal_cmd = sil24_post_internal_cmd,
|
|
|
|
.port_start = sil24_port_start,
|
|
};
|
|
|
|
/*
|
|
* Use bits 30-31 of port_flags to encode available port numbers.
|
|
* Current maxium is 4.
|
|
*/
|
|
#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
|
|
#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
|
|
|
|
static const struct ata_port_info sil24_port_info[] = {
|
|
/* sil_3124 */
|
|
{
|
|
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
|
|
SIL24_FLAG_PCIX_IRQ_WOC,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
/* sil_3132 */
|
|
{
|
|
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
/* sil_3131/sil_3531 */
|
|
{
|
|
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
};
|
|
|
|
static int sil24_tag(int tag)
|
|
{
|
|
if (unlikely(ata_tag_internal(tag)))
|
|
return 0;
|
|
return tag;
|
|
}
|
|
|
|
static void sil24_dev_config(struct ata_device *dev)
|
|
{
|
|
void __iomem *port = dev->ap->ioaddr.cmd_addr;
|
|
|
|
if (dev->cdb_len == 16)
|
|
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
|
|
else
|
|
writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
|
|
}
|
|
|
|
static inline void sil24_update_tf(struct ata_port *ap)
|
|
{
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
struct sil24_prb __iomem *prb = port;
|
|
u8 fis[6 * 4];
|
|
|
|
memcpy_fromio(fis, prb->fis, 6 * 4);
|
|
ata_tf_from_fis(fis, &pp->tf);
|
|
}
|
|
|
|
static u8 sil24_check_status(struct ata_port *ap)
|
|
{
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
return pp->tf.command;
|
|
}
|
|
|
|
static int sil24_scr_map[] = {
|
|
[SCR_CONTROL] = 0,
|
|
[SCR_STATUS] = 1,
|
|
[SCR_ERROR] = 2,
|
|
[SCR_ACTIVE] = 3,
|
|
};
|
|
|
|
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
|
|
{
|
|
void __iomem *scr_addr = ap->ioaddr.scr_addr;
|
|
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
|
|
void __iomem *addr;
|
|
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
|
|
return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
|
|
}
|
|
return 0xffffffffU;
|
|
}
|
|
|
|
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
|
|
{
|
|
void __iomem *scr_addr = ap->ioaddr.scr_addr;
|
|
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
|
|
void __iomem *addr;
|
|
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
|
|
writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
|
|
}
|
|
}
|
|
|
|
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
*tf = pp->tf;
|
|
}
|
|
|
|
static int sil24_init_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
|
|
ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_INIT, PORT_CS_INIT, 10, 100);
|
|
tmp = ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_RDY, 0, 10, 100);
|
|
|
|
if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static int sil24_softreset(struct ata_port *ap, unsigned int *class)
|
|
{
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
|
|
dma_addr_t paddr = pp->cmd_block_dma;
|
|
u32 mask, irq_stat;
|
|
const char *reason;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
if (ata_port_offline(ap)) {
|
|
DPRINTK("PHY reports no device\n");
|
|
*class = ATA_DEV_NONE;
|
|
goto out;
|
|
}
|
|
|
|
/* put the port into known state */
|
|
if (sil24_init_port(ap)) {
|
|
reason ="port not ready";
|
|
goto err;
|
|
}
|
|
|
|
/* do SRST */
|
|
prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
|
|
prb->fis[1] = 0; /* no PMP yet */
|
|
|
|
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
|
|
writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
|
|
|
|
mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
|
|
irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0,
|
|
100, ATA_TMOUT_BOOT / HZ * 1000);
|
|
|
|
writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */
|
|
irq_stat >>= PORT_IRQ_RAW_SHIFT;
|
|
|
|
if (!(irq_stat & PORT_IRQ_COMPLETE)) {
|
|
if (irq_stat & PORT_IRQ_ERROR)
|
|
reason = "SRST command error";
|
|
else
|
|
reason = "timeout";
|
|
goto err;
|
|
}
|
|
|
|
sil24_update_tf(ap);
|
|
*class = ata_dev_classify(&pp->tf);
|
|
|
|
if (*class == ATA_DEV_UNKNOWN)
|
|
*class = ATA_DEV_NONE;
|
|
|
|
out:
|
|
DPRINTK("EXIT, class=%u\n", *class);
|
|
return 0;
|
|
|
|
err:
|
|
ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
|
|
return -EIO;
|
|
}
|
|
|
|
static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
|
|
{
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
const char *reason;
|
|
int tout_msec, rc;
|
|
u32 tmp;
|
|
|
|
/* sil24 does the right thing(tm) without any protection */
|
|
sata_set_spd(ap);
|
|
|
|
tout_msec = 100;
|
|
if (ata_port_online(ap))
|
|
tout_msec = 5000;
|
|
|
|
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
|
|
tmp = ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec);
|
|
|
|
/* SStatus oscillates between zero and valid status after
|
|
* DEV_RST, debounce it.
|
|
*/
|
|
rc = sata_phy_debounce(ap, sata_deb_timing_long);
|
|
if (rc) {
|
|
reason = "PHY debouncing failed";
|
|
goto err;
|
|
}
|
|
|
|
if (tmp & PORT_CS_DEV_RST) {
|
|
if (ata_port_offline(ap))
|
|
return 0;
|
|
reason = "link not ready";
|
|
goto err;
|
|
}
|
|
|
|
/* Sil24 doesn't store signature FIS after hardreset, so we
|
|
* can't wait for BSY to clear. Some devices take a long time
|
|
* to get ready and those devices will choke if we don't wait
|
|
* for BSY clearance here. Tell libata to perform follow-up
|
|
* softreset.
|
|
*/
|
|
return -EAGAIN;
|
|
|
|
err:
|
|
ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason);
|
|
return -EIO;
|
|
}
|
|
|
|
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
|
|
struct sil24_sge *sge)
|
|
{
|
|
struct scatterlist *sg;
|
|
|
|
ata_for_each_sg(sg, qc) {
|
|
sge->addr = cpu_to_le64(sg_dma_address(sg));
|
|
sge->cnt = cpu_to_le32(sg_dma_len(sg));
|
|
if (ata_sg_is_last(sg, qc))
|
|
sge->flags = cpu_to_le32(SGE_TRM);
|
|
else
|
|
sge->flags = 0;
|
|
sge++;
|
|
}
|
|
}
|
|
|
|
static void sil24_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
union sil24_cmd_block *cb;
|
|
struct sil24_prb *prb;
|
|
struct sil24_sge *sge;
|
|
u16 ctrl = 0;
|
|
|
|
cb = &pp->cmd_block[sil24_tag(qc->tag)];
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_PIO:
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NCQ:
|
|
case ATA_PROT_NODATA:
|
|
prb = &cb->ata.prb;
|
|
sge = cb->ata.sge;
|
|
break;
|
|
|
|
case ATA_PROT_ATAPI:
|
|
case ATA_PROT_ATAPI_DMA:
|
|
case ATA_PROT_ATAPI_NODATA:
|
|
prb = &cb->atapi.prb;
|
|
sge = cb->atapi.sge;
|
|
memset(cb->atapi.cdb, 0, 32);
|
|
memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
|
|
|
|
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
|
|
if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
ctrl = PRB_CTRL_PACKET_WRITE;
|
|
else
|
|
ctrl = PRB_CTRL_PACKET_READ;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
prb = NULL; /* shut up, gcc */
|
|
sge = NULL;
|
|
BUG();
|
|
}
|
|
|
|
prb->ctrl = cpu_to_le16(ctrl);
|
|
ata_tf_to_fis(&qc->tf, prb->fis, 0);
|
|
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
sil24_fill_sg(qc, sge);
|
|
}
|
|
|
|
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
unsigned int tag = sil24_tag(qc->tag);
|
|
dma_addr_t paddr;
|
|
void __iomem *activate;
|
|
|
|
paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
|
|
activate = port + PORT_CMD_ACTIVATE + tag * 8;
|
|
|
|
writel((u32)paddr, activate);
|
|
writel((u64)paddr >> 32, activate + 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sil24_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* unused */
|
|
}
|
|
|
|
static void sil24_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
|
|
/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
|
|
* PORT_IRQ_ENABLE instead.
|
|
*/
|
|
writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
|
|
}
|
|
|
|
static void sil24_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
/* clear IRQ */
|
|
tmp = readl(port + PORT_IRQ_STAT);
|
|
writel(tmp, port + PORT_IRQ_STAT);
|
|
|
|
/* turn IRQ back on */
|
|
writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
|
|
}
|
|
|
|
static void sil24_error_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
int freeze = 0;
|
|
u32 irq_stat;
|
|
|
|
/* on error, we need to clear IRQ explicitly */
|
|
irq_stat = readl(port + PORT_IRQ_STAT);
|
|
writel(irq_stat, port + PORT_IRQ_STAT);
|
|
|
|
/* first, analyze and record host port events */
|
|
ata_ehi_clear_desc(ehi);
|
|
|
|
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
|
|
|
|
if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, ", %s",
|
|
irq_stat & PORT_IRQ_PHYRDY_CHG ?
|
|
"PHY RDY changed" : "device exchanged");
|
|
freeze = 1;
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_UNK_FIS) {
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(ehi , ", unknown FIS");
|
|
freeze = 1;
|
|
}
|
|
|
|
/* deal with command error */
|
|
if (irq_stat & PORT_IRQ_ERROR) {
|
|
struct sil24_cerr_info *ci = NULL;
|
|
unsigned int err_mask = 0, action = 0;
|
|
struct ata_queued_cmd *qc;
|
|
u32 cerr;
|
|
|
|
/* analyze CMD_ERR */
|
|
cerr = readl(port + PORT_CMD_ERR);
|
|
if (cerr < ARRAY_SIZE(sil24_cerr_db))
|
|
ci = &sil24_cerr_db[cerr];
|
|
|
|
if (ci && ci->desc) {
|
|
err_mask |= ci->err_mask;
|
|
action |= ci->action;
|
|
ata_ehi_push_desc(ehi, ", %s", ci->desc);
|
|
} else {
|
|
err_mask |= AC_ERR_OTHER;
|
|
action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(ehi, ", unknown command error %d",
|
|
cerr);
|
|
}
|
|
|
|
/* record error info */
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc) {
|
|
sil24_update_tf(ap);
|
|
qc->err_mask |= err_mask;
|
|
} else
|
|
ehi->err_mask |= err_mask;
|
|
|
|
ehi->action |= action;
|
|
}
|
|
|
|
/* freeze or abort */
|
|
if (freeze)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static void sil24_finish_qc(struct ata_queued_cmd *qc)
|
|
{
|
|
if (qc->flags & ATA_QCFLAG_RESULT_TF)
|
|
sil24_update_tf(qc->ap);
|
|
}
|
|
|
|
static inline void sil24_host_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = ap->ioaddr.cmd_addr;
|
|
u32 slot_stat, qc_active;
|
|
int rc;
|
|
|
|
slot_stat = readl(port + PORT_SLOT_STAT);
|
|
|
|
if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
|
|
sil24_error_intr(ap);
|
|
return;
|
|
}
|
|
|
|
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
|
|
writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
|
|
|
|
qc_active = slot_stat & ~HOST_SSTAT_ATTN;
|
|
rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
|
|
if (rc > 0)
|
|
return;
|
|
if (rc < 0) {
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_port_freeze(ap);
|
|
return;
|
|
}
|
|
|
|
if (ata_ratelimit())
|
|
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
|
|
"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
|
|
slot_stat, ap->active_tag, ap->sactive);
|
|
}
|
|
|
|
static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
|
|
unsigned handled = 0;
|
|
u32 status;
|
|
int i;
|
|
|
|
status = readl(host_base + HOST_IRQ_STAT);
|
|
|
|
if (status == 0xffffffff) {
|
|
printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
|
|
"PCI fault or device removal?\n");
|
|
goto out;
|
|
}
|
|
|
|
if (!(status & IRQ_STAT_4PORTS))
|
|
goto out;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < host->n_ports; i++)
|
|
if (status & (1 << i)) {
|
|
struct ata_port *ap = host->ports[i];
|
|
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
|
|
sil24_host_intr(host->ports[i]);
|
|
handled++;
|
|
} else
|
|
printk(KERN_ERR DRV_NAME
|
|
": interrupt from disabled port %d\n", i);
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void sil24_error_handler(struct ata_port *ap)
|
|
{
|
|
struct ata_eh_context *ehc = &ap->eh_context;
|
|
|
|
if (sil24_init_port(ap)) {
|
|
ata_eh_freeze_port(ap);
|
|
ehc->i.action |= ATA_EH_HARDRESET;
|
|
}
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
sil24_init_port(ap);
|
|
}
|
|
|
|
static int sil24_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct sil24_port_priv *pp;
|
|
union sil24_cmd_block *cb;
|
|
size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
|
|
dma_addr_t cb_dma;
|
|
int rc;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
pp->tf.command = ATA_DRDY;
|
|
|
|
cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
|
|
if (!cb)
|
|
return -ENOMEM;
|
|
memset(cb, 0, cb_size);
|
|
|
|
rc = ata_pad_alloc(ap, dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp->cmd_block = cb;
|
|
pp->cmd_block_dma = cb_dma;
|
|
|
|
ap->private_data = pp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sil24_init_controller(struct ata_host *host)
|
|
{
|
|
void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
|
|
void __iomem *port_base = host->iomap[SIL24_PORT_BAR];
|
|
u32 tmp;
|
|
int i;
|
|
|
|
/* GPIO off */
|
|
writel(0, host_base + HOST_FLASH_CMD);
|
|
|
|
/* clear global reset & mask interrupts during initialization */
|
|
writel(0, host_base + HOST_CTRL);
|
|
|
|
/* init ports */
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
void __iomem *port = port_base + i * PORT_REGS_SIZE;
|
|
|
|
/* Initial PHY setting */
|
|
writel(0x20c, port + PORT_PHY_CFG);
|
|
|
|
/* Clear port RST */
|
|
tmp = readl(port + PORT_CTRL_STAT);
|
|
if (tmp & PORT_CS_PORT_RST) {
|
|
writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
|
|
tmp = ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_PORT_RST,
|
|
PORT_CS_PORT_RST, 10, 100);
|
|
if (tmp & PORT_CS_PORT_RST)
|
|
dev_printk(KERN_ERR, host->dev,
|
|
"failed to clear port RST\n");
|
|
}
|
|
|
|
/* Configure IRQ WoC */
|
|
if (host->ports[0]->flags & SIL24_FLAG_PCIX_IRQ_WOC)
|
|
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
|
|
else
|
|
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
|
|
|
|
/* Zero error counters. */
|
|
writel(0x8000, port + PORT_DECODE_ERR_THRESH);
|
|
writel(0x8000, port + PORT_CRC_ERR_THRESH);
|
|
writel(0x8000, port + PORT_HSHK_ERR_THRESH);
|
|
writel(0x0000, port + PORT_DECODE_ERR_CNT);
|
|
writel(0x0000, port + PORT_CRC_ERR_CNT);
|
|
writel(0x0000, port + PORT_HSHK_ERR_CNT);
|
|
|
|
/* Always use 64bit activation */
|
|
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
|
|
|
|
/* Clear port multiplier enable and resume bits */
|
|
writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME,
|
|
port + PORT_CTRL_CLR);
|
|
}
|
|
|
|
/* Turn on interrupts */
|
|
writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
|
|
}
|
|
|
|
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version = 0;
|
|
struct ata_port_info pi = sil24_port_info[ent->driver_data];
|
|
const struct ata_port_info *ppi[] = { &pi, NULL };
|
|
void __iomem * const *iomap;
|
|
struct ata_host *host;
|
|
int i, rc;
|
|
u32 tmp;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* acquire resources */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev,
|
|
(1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
|
|
DRV_NAME);
|
|
if (rc)
|
|
return rc;
|
|
iomap = pcim_iomap_table(pdev);
|
|
|
|
/* apply workaround for completion IRQ loss on PCI-X errata */
|
|
if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
|
|
tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
|
|
if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"Applying completion IRQ loss on PCI-X "
|
|
"errata fix\n");
|
|
else
|
|
pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
|
|
}
|
|
|
|
/* allocate and fill host */
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi,
|
|
SIL24_FLAG2NPORTS(ppi[0]->flags));
|
|
if (!host)
|
|
return -ENOMEM;
|
|
host->iomap = iomap;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
void __iomem *port = iomap[SIL24_PORT_BAR] + i * PORT_REGS_SIZE;
|
|
|
|
host->ports[i]->ioaddr.cmd_addr = port;
|
|
host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
|
|
|
|
ata_std_ports(&host->ports[i]->ioaddr);
|
|
}
|
|
|
|
/* configure and activate the device */
|
|
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
if (rc) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"64-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
} else {
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
sil24_init_controller(host);
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
|
|
&sil24_sht);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int sil24_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
|
|
writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
|
|
|
|
sil24_init_controller(host);
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init sil24_init(void)
|
|
{
|
|
return pci_register_driver(&sil24_pci_driver);
|
|
}
|
|
|
|
static void __exit sil24_exit(void)
|
|
{
|
|
pci_unregister_driver(&sil24_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Tejun Heo");
|
|
MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
|
|
|
|
module_init(sil24_init);
|
|
module_exit(sil24_exit);
|