d0760b3bc8
The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.
These changes are:
* The system peripheral I/O region we remap has increased from
0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
* The increased I/O region forces changes to entry-macro.S and
debug-macro.S due to ARM's limited immediate offset addressing
modes.
* Maximum number of GPIO banks increases to 5.
* 2 MMC controllers so the board-setup code needs to specify which
controller it wishes to use when calling at91_add_device_mmc().
Original patch from Nicolas Ferre.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
209 lines
8.3 KiB
C
209 lines
8.3 KiB
C
/*
|
|
* include/asm-arm/arch-at91/gpio.h
|
|
*
|
|
* Copyright (C) 2005 HP Labs
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
|
|
#define __ASM_ARCH_AT91RM9200_GPIO_H
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#define PIN_BASE NR_AIC_IRQS
|
|
|
|
#define MAX_GPIO_BANKS 5
|
|
|
|
/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
|
|
|
|
#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
|
|
#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
|
|
#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
|
|
#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
|
|
#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
|
|
#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
|
|
#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
|
|
#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
|
|
#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
|
|
#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
|
|
#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
|
|
#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
|
|
#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
|
|
#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
|
|
#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
|
|
#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
|
|
#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
|
|
#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
|
|
#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
|
|
#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
|
|
#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
|
|
#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
|
|
#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
|
|
#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
|
|
#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
|
|
#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
|
|
#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
|
|
#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
|
|
#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
|
|
#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
|
|
#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
|
|
#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
|
|
|
|
#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
|
|
#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
|
|
#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
|
|
#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
|
|
#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
|
|
#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
|
|
#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
|
|
#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
|
|
#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
|
|
#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
|
|
#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
|
|
#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
|
|
#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
|
|
#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
|
|
#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
|
|
#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
|
|
#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
|
|
#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
|
|
#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
|
|
#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
|
|
#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
|
|
#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
|
|
#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
|
|
#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
|
|
#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
|
|
#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
|
|
#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
|
|
#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
|
|
#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
|
|
#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
|
|
#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
|
|
#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
|
|
|
|
#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
|
|
#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
|
|
#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
|
|
#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
|
|
#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
|
|
#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
|
|
#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
|
|
#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
|
|
#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
|
|
#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
|
|
#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
|
|
#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
|
|
#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
|
|
#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
|
|
#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
|
|
#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
|
|
#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
|
|
#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
|
|
#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
|
|
#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
|
|
#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
|
|
#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
|
|
#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
|
|
#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
|
|
#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
|
|
#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
|
|
#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
|
|
#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
|
|
#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
|
|
#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
|
|
#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
|
|
#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
|
|
|
|
#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
|
|
#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
|
|
#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
|
|
#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
|
|
#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
|
|
#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
|
|
#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
|
|
#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
|
|
#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
|
|
#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
|
|
#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
|
|
#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
|
|
#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
|
|
#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
|
|
#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
|
|
#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
|
|
#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
|
|
#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
|
|
#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
|
|
#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
|
|
#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
|
|
#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
|
|
#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
|
|
#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
|
|
#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
|
|
#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
|
|
#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
|
|
#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
|
|
#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
|
|
#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
|
|
#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
|
|
#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
|
|
|
|
#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
|
|
#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
|
|
#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
|
|
#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
|
|
#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
|
|
#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
|
|
#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
|
|
#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
|
|
#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
|
|
#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
|
|
#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
|
|
#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
|
|
#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
|
|
#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
|
|
#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
|
|
#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
|
|
#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
|
|
#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
|
|
#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
|
|
#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
|
|
#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
|
|
#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
|
|
#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
|
|
#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
|
|
#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
|
|
#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
|
|
#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
|
|
#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
|
|
#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
|
|
#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
|
|
#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
|
|
#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
|
|
|
|
#ifndef __ASSEMBLY__
|
|
/* setup setup routines, called from board init or driver probe() */
|
|
extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
|
|
extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
|
|
extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
|
|
extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
|
|
extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
|
|
extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
|
|
|
|
/* callable at any time */
|
|
extern int at91_set_gpio_value(unsigned pin, int value);
|
|
extern int at91_get_gpio_value(unsigned pin);
|
|
|
|
/* callable only from core power-management code */
|
|
extern void at91_gpio_suspend(void);
|
|
extern void at91_gpio_resume(void);
|
|
#endif
|
|
|
|
#endif
|
|
|