android_kernel_xiaomi_sm8350/arch/x86/boot/video-vesa.c
H. Peter Anvin e6e1ace990 x86 setup: sizeof() is unsigned, unbreak comparisons
We use signed values for limit checking since the values can go
negative under certain circumstances.  However, sizeof() is unsigned
and forces the comparison to be unsigned, so move the comparison into
the heap_free() macros so we can ensure it is a signed comparison.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-25 20:20:06 -07:00

293 lines
6.9 KiB
C

/* -*- linux-c -*- ------------------------------------------------------- *
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
*
* ----------------------------------------------------------------------- */
/*
* arch/i386/boot/video-vesa.c
*
* VESA text modes
*/
#include "boot.h"
#include "video.h"
#include "vesa.h"
/* VESA information */
static struct vesa_general_info vginfo;
static struct vesa_mode_info vminfo;
__videocard video_vesa;
static void vesa_store_mode_params_graphics(void);
static int vesa_probe(void)
{
#if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
u16 ax, cx, di;
u16 mode;
addr_t mode_ptr;
struct mode_info *mi;
int nmodes = 0;
video_vesa.modes = GET_HEAP(struct mode_info, 0);
vginfo.signature = VBE2_MAGIC;
ax = 0x4f00;
di = (size_t)&vginfo;
asm(INT10
: "+a" (ax), "+D" (di), "=m" (vginfo)
: : "ebx", "ecx", "edx", "esi");
if (ax != 0x004f ||
vginfo.signature != VESA_MAGIC ||
vginfo.version < 0x0102)
return 0; /* Not present */
#endif /* CONFIG_VIDEO_VESA || CONFIG_FIRMWARE_EDID */
#ifdef CONFIG_VIDEO_VESA
set_fs(vginfo.video_mode_ptr.seg);
mode_ptr = vginfo.video_mode_ptr.off;
while ((mode = rdfs16(mode_ptr)) != 0xffff) {
mode_ptr += 2;
if (!heap_free(sizeof(struct mode_info)))
break; /* Heap full, can't save mode info */
if (mode & ~0x1ff)
continue;
memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
ax = 0x4f01;
cx = mode;
di = (size_t)&vminfo;
asm(INT10
: "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
: : "ebx", "edx", "esi");
if (ax != 0x004f)
continue;
if ((vminfo.mode_attr & 0x15) == 0x05) {
/* Text Mode, TTY BIOS supported,
supported by hardware */
mi = GET_HEAP(struct mode_info, 1);
mi->mode = mode + VIDEO_FIRST_VESA;
mi->x = vminfo.h_res;
mi->y = vminfo.v_res;
nmodes++;
} else if ((vminfo.mode_attr & 0x99) == 0x99) {
#ifdef CONFIG_FB
/* Graphics mode, color, linear frame buffer
supported -- register the mode but hide from
the menu. Only do this if framebuffer is
configured, however, otherwise the user will
be left without a screen. */
mi = GET_HEAP(struct mode_info, 1);
mi->mode = mode + VIDEO_FIRST_VESA;
mi->x = mi->y = 0;
nmodes++;
#endif
}
}
return nmodes;
#else
return 0;
#endif /* CONFIG_VIDEO_VESA */
}
static int vesa_set_mode(struct mode_info *mode)
{
u16 ax, bx, cx, di;
int is_graphic;
u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA;
memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
ax = 0x4f01;
cx = vesa_mode;
di = (size_t)&vminfo;
asm(INT10
: "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
: : "ebx", "edx", "esi");
if (ax != 0x004f)
return -1;
if ((vminfo.mode_attr & 0x15) == 0x05) {
/* It's a supported text mode */
is_graphic = 0;
} else if ((vminfo.mode_attr & 0x99) == 0x99) {
/* It's a graphics mode with linear frame buffer */
is_graphic = 1;
vesa_mode |= 0x4000; /* Request linear frame buffer */
} else {
return -1; /* Invalid mode */
}
ax = 0x4f02;
bx = vesa_mode;
di = 0;
asm volatile(INT10
: "+a" (ax), "+b" (bx), "+D" (di)
: : "ecx", "edx", "esi");
if (ax != 0x004f)
return -1;
graphic_mode = is_graphic;
if (!is_graphic) {
/* Text mode */
force_x = mode->x;
force_y = mode->y;
do_restore = 1;
} else {
/* Graphics mode */
vesa_store_mode_params_graphics();
}
return 0;
}
/* Switch DAC to 8-bit mode */
static void vesa_dac_set_8bits(void)
{
u8 dac_size = 6;
/* If possible, switch the DAC to 8-bit mode */
if (vginfo.capabilities & 1) {
u16 ax, bx;
ax = 0x4f08;
bx = 0x0800;
asm volatile(INT10
: "+a" (ax), "+b" (bx)
: : "ecx", "edx", "esi", "edi");
if (ax == 0x004f)
dac_size = bx >> 8;
}
/* Set the color sizes to the DAC size, and offsets to 0 */
boot_params.screen_info.red_size = dac_size;
boot_params.screen_info.green_size = dac_size;
boot_params.screen_info.blue_size = dac_size;
boot_params.screen_info.rsvd_size = dac_size;
boot_params.screen_info.red_pos = 0;
boot_params.screen_info.green_pos = 0;
boot_params.screen_info.blue_pos = 0;
boot_params.screen_info.rsvd_pos = 0;
}
/* Save the VESA protected mode info */
static void vesa_store_pm_info(void)
{
u16 ax, bx, di, es;
ax = 0x4f0a;
bx = di = 0;
asm("pushw %%es; "INT10"; movw %%es,%0; popw %%es"
: "=d" (es), "+a" (ax), "+b" (bx), "+D" (di)
: : "ecx", "esi");
if (ax != 0x004f)
return;
boot_params.screen_info.vesapm_seg = es;
boot_params.screen_info.vesapm_off = di;
}
/*
* Save video mode parameters for graphics mode
*/
static void vesa_store_mode_params_graphics(void)
{
/* Tell the kernel we're in VESA graphics mode */
boot_params.screen_info.orig_video_isVGA = 0x23;
/* Mode parameters */
boot_params.screen_info.vesa_attributes = vminfo.mode_attr;
boot_params.screen_info.lfb_linelength = vminfo.logical_scan;
boot_params.screen_info.lfb_width = vminfo.h_res;
boot_params.screen_info.lfb_height = vminfo.v_res;
boot_params.screen_info.lfb_depth = vminfo.bpp;
boot_params.screen_info.pages = vminfo.image_planes;
boot_params.screen_info.lfb_base = vminfo.lfb_ptr;
memcpy(&boot_params.screen_info.red_size,
&vminfo.rmask, 8);
/* General parameters */
boot_params.screen_info.lfb_size = vginfo.total_memory;
if (vminfo.bpp <= 8)
vesa_dac_set_8bits();
vesa_store_pm_info();
}
/*
* Save EDID information for the kernel; this is invoked, separately,
* after mode-setting.
*/
void vesa_store_edid(void)
{
#ifdef CONFIG_FIRMWARE_EDID
u16 ax, bx, cx, dx, di;
/* Apparently used as a nonsense token... */
memset(&boot_params.edid_info, 0x13, sizeof boot_params.edid_info);
if (vginfo.version < 0x0200)
return; /* EDID requires VBE 2.0+ */
ax = 0x4f15; /* VBE DDC */
bx = 0x0000; /* Report DDC capabilities */
cx = 0; /* Controller 0 */
di = 0; /* ES:DI must be 0 by spec */
/* Note: The VBE DDC spec is different from the main VESA spec;
we genuinely have to assume all registers are destroyed here. */
asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
: "+a" (ax), "+b" (bx)
: "c" (cx), "D" (di)
: "esi");
if (ax != 0x004f)
return; /* No EDID */
/* BH = time in seconds to transfer EDD information */
/* BL = DDC level supported */
ax = 0x4f15; /* VBE DDC */
bx = 0x0001; /* Read EDID */
cx = 0; /* Controller 0 */
dx = 0; /* EDID block number */
di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
asm(INT10
: "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info)
: "c" (cx), "D" (di)
: "esi");
#endif /* CONFIG_FIRMWARE_EDID */
}
__videocard video_vesa =
{
.card_name = "VESA",
.probe = vesa_probe,
.set_mode = vesa_set_mode,
.xmode_first = VIDEO_FIRST_VESA,
.xmode_n = 0x200,
};