android_kernel_xiaomi_sm8350/drivers/char/tpm/tpm_nsc.c
Sam Ravnborg 4821cd111d tpm: fix section mismatch warning
Fix following warning:
WARNING: vmlinux.o(.init.text+0x32804): Section mismatch in reference from the function init_nsc() to the function .devexit.text:tpm_nsc_remove()

The function tpm_nsc_remove() are used outside __exit, so remove the __exit
annotation to make sure the function is always avilable.

Note: Trying to compare this module with other users of platform_device gve me
the impression that this driver needs some work to match other users.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Kylene Hall <kjhall@us.ibm.com>
Cc: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:26 -07:00

403 lines
9.8 KiB
C

/*
* Copyright (C) 2004 IBM Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
* Dave Safford <safford@watson.ibm.com>
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
*
*/
#include <linux/platform_device.h>
#include "tpm.h"
/* National definitions */
enum tpm_nsc_addr{
TPM_NSC_IRQ = 0x07,
TPM_NSC_BASE0_HI = 0x60,
TPM_NSC_BASE0_LO = 0x61,
TPM_NSC_BASE1_HI = 0x62,
TPM_NSC_BASE1_LO = 0x63
};
enum tpm_nsc_index {
NSC_LDN_INDEX = 0x07,
NSC_SID_INDEX = 0x20,
NSC_LDC_INDEX = 0x30,
NSC_DIO_INDEX = 0x60,
NSC_CIO_INDEX = 0x62,
NSC_IRQ_INDEX = 0x70,
NSC_ITS_INDEX = 0x71
};
enum tpm_nsc_status_loc {
NSC_STATUS = 0x01,
NSC_COMMAND = 0x01,
NSC_DATA = 0x00
};
/* status bits */
enum tpm_nsc_status {
NSC_STATUS_OBF = 0x01, /* output buffer full */
NSC_STATUS_IBF = 0x02, /* input buffer full */
NSC_STATUS_F0 = 0x04, /* F0 */
NSC_STATUS_A2 = 0x08, /* A2 */
NSC_STATUS_RDY = 0x10, /* ready to receive command */
NSC_STATUS_IBR = 0x20 /* ready to receive data */
};
/* command bits */
enum tpm_nsc_cmd_mode {
NSC_COMMAND_NORMAL = 0x01, /* normal mode */
NSC_COMMAND_EOC = 0x03,
NSC_COMMAND_CANCEL = 0x22
};
/*
* Wait for a certain status to appear
*/
static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
{
unsigned long stop;
/* status immediately available check */
*data = inb(chip->vendor.base + NSC_STATUS);
if ((*data & mask) == val)
return 0;
/* wait for status */
stop = jiffies + 10 * HZ;
do {
msleep(TPM_TIMEOUT);
*data = inb(chip->vendor.base + 1);
if ((*data & mask) == val)
return 0;
}
while (time_before(jiffies, stop));
return -EBUSY;
}
static int nsc_wait_for_ready(struct tpm_chip *chip)
{
int status;
unsigned long stop;
/* status immediately available check */
status = inb(chip->vendor.base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
status = inb(chip->vendor.base + NSC_DATA);
if (status & NSC_STATUS_RDY)
return 0;
/* wait for status */
stop = jiffies + 100;
do {
msleep(TPM_TIMEOUT);
status = inb(chip->vendor.base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
status = inb(chip->vendor.base + NSC_DATA);
if (status & NSC_STATUS_RDY)
return 0;
}
while (time_before(jiffies, stop));
dev_info(chip->dev, "wait for ready failed\n");
return -EBUSY;
}
static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
{
u8 *buffer = buf;
u8 data, *p;
u32 size;
__be32 *native_size;
if (count < 6)
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
dev_err(chip->dev, "F0 timeout\n");
return -EIO;
}
if ((data =
inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
dev_err(chip->dev, "not in normal mode (0x%x)\n",
data);
return -EIO;
}
/* read the whole packet */
for (p = buffer; p < &buffer[count]; p++) {
if (wait_for_stat
(chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
dev_err(chip->dev,
"OBF timeout (while reading data)\n");
return -EIO;
}
if (data & NSC_STATUS_F0)
break;
*p = inb(chip->vendor.base + NSC_DATA);
}
if ((data & NSC_STATUS_F0) == 0 &&
(wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) {
dev_err(chip->dev, "F0 not set\n");
return -EIO;
}
if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) {
dev_err(chip->dev,
"expected end of command(0x%x)\n", data);
return -EIO;
}
native_size = (__force __be32 *) (buf + 2);
size = be32_to_cpu(*native_size);
if (count < size)
return -EIO;
return size;
}
static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
{
u8 data;
int i;
/*
* If we hit the chip with back to back commands it locks up
* and never set IBF. Hitting it with this "hammer" seems to
* fix it. Not sure why this is needed, we followed the flow
* chart in the manual to the letter.
*/
outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
if (nsc_wait_for_ready(chip) != 0)
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND);
if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
dev_err(chip->dev, "IBR timeout\n");
return -EIO;
}
for (i = 0; i < count; i++) {
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(chip->dev,
"IBF timeout (while writing data)\n");
return -EIO;
}
outb(buf[i], chip->vendor.base + NSC_DATA);
}
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND);
return count;
}
static void tpm_nsc_cancel(struct tpm_chip *chip)
{
outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
}
static u8 tpm_nsc_status(struct tpm_chip *chip)
{
return inb(chip->vendor.base + NSC_STATUS);
}
static const struct file_operations nsc_ops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.open = tpm_open,
.read = tpm_read,
.write = tpm_write,
.release = tpm_release,
};
static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
static DEVICE_ATTR(cancel, S_IWUSR|S_IWGRP, NULL, tpm_store_cancel);
static struct attribute * nsc_attrs[] = {
&dev_attr_pubek.attr,
&dev_attr_pcrs.attr,
&dev_attr_caps.attr,
&dev_attr_cancel.attr,
NULL,
};
static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs };
static const struct tpm_vendor_specific tpm_nsc = {
.recv = tpm_nsc_recv,
.send = tpm_nsc_send,
.cancel = tpm_nsc_cancel,
.status = tpm_nsc_status,
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
.req_canceled = NSC_STATUS_RDY,
.attr_group = &nsc_attr_grp,
.miscdev = { .fops = &nsc_ops, },
};
static struct platform_device *pdev = NULL;
static void tpm_nsc_remove(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
if ( chip ) {
release_region(chip->vendor.base, 2);
tpm_remove_hardware(chip->dev);
}
}
static struct device_driver nsc_drv = {
.name = "tpm_nsc",
.bus = &platform_bus_type,
.owner = THIS_MODULE,
.suspend = tpm_pm_suspend,
.resume = tpm_pm_resume,
};
static int __init init_nsc(void)
{
int rc = 0;
int lo, hi, err;
int nscAddrBase = TPM_ADDR;
struct tpm_chip *chip;
unsigned long base;
/* verify that it is a National part (SID) */
if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)|
(tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE);
if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6)
return -ENODEV;
}
err = driver_register(&nsc_drv);
if (err)
return err;
hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
base = (hi<<8) | lo;
/* enable the DPM module */
tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
if (!pdev) {
rc = -ENOMEM;
goto err_unreg_drv;
}
pdev->name = "tpm_nscl0";
pdev->id = -1;
pdev->num_resources = 0;
pdev->dev.release = tpm_nsc_remove;
pdev->dev.driver = &nsc_drv;
if ((rc = platform_device_register(pdev)) < 0)
goto err_free_dev;
if (request_region(base, 2, "tpm_nsc0") == NULL ) {
rc = -EBUSY;
goto err_unreg_dev;
}
if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) {
rc = -ENODEV;
goto err_rel_reg;
}
dev_dbg(&pdev->dev, "NSC TPM detected\n");
dev_dbg(&pdev->dev,
"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20),
tpm_read_index(nscAddrBase,0x27));
dev_dbg(&pdev->dev,
"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25),
tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28));
dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n",
(tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61));
dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n",
(tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63));
dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n",
tpm_read_index(nscAddrBase,0x70));
dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n",
tpm_read_index(nscAddrBase,0x71));
dev_dbg(&pdev->dev,
"NSC DMA channel select0 0x%x, select1 0x%x\n",
tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75));
dev_dbg(&pdev->dev,
"NSC Config "
"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1),
tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3),
tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5),
tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7),
tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9));
dev_info(&pdev->dev,
"NSC TPM revision %d\n",
tpm_read_index(nscAddrBase, 0x27) & 0x1F);
chip->vendor.base = base;
return 0;
err_rel_reg:
release_region(base, 2);
err_unreg_dev:
platform_device_unregister(pdev);
err_free_dev:
kfree(pdev);
err_unreg_drv:
driver_unregister(&nsc_drv);
return rc;
}
static void __exit cleanup_nsc(void)
{
if (pdev) {
tpm_nsc_remove(&pdev->dev);
platform_device_unregister(pdev);
kfree(pdev);
pdev = NULL;
}
driver_unregister(&nsc_drv);
}
module_init(init_nsc);
module_exit(cleanup_nsc);
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
MODULE_DESCRIPTION("TPM Driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");