1036 lines
29 KiB
C
1036 lines
29 KiB
C
/*
|
|
* linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
|
|
*
|
|
* Setup pointers to hardware-dependent routines.
|
|
* Copyright (C) 2000-2001 Toshiba Corporation
|
|
*
|
|
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
|
|
* terms of the GNU General Public License version 2. This program is
|
|
* licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*
|
|
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
|
|
*/
|
|
#include <linux/config.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/console.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/wbflush.h>
|
|
#include <asm/reboot.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/time.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/tx4938/rbtx4938.h>
|
|
#ifdef CONFIG_SERIAL_TXX9
|
|
#include <linux/tty.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#endif
|
|
|
|
extern void rbtx4938_time_init(void) __init;
|
|
extern char * __init prom_getcmdline(void);
|
|
static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
|
|
|
|
/* These functions are used for rebooting or halting the machine*/
|
|
extern void rbtx4938_machine_restart(char *command);
|
|
extern void rbtx4938_machine_halt(void);
|
|
extern void rbtx4938_machine_power_off(void);
|
|
|
|
/* clocks */
|
|
unsigned int txx9_master_clock;
|
|
unsigned int txx9_cpu_clock;
|
|
unsigned int txx9_gbus_clock;
|
|
|
|
unsigned long rbtx4938_ce_base[8];
|
|
unsigned long rbtx4938_ce_size[8];
|
|
int txboard_pci66_mode;
|
|
static int tx4938_pcic_trdyto; /* default: disabled */
|
|
static int tx4938_pcic_retryto; /* default: disabled */
|
|
static int tx4938_ccfg_toeon = 1;
|
|
|
|
struct tx4938_pcic_reg *pcicptrs[4] = {
|
|
tx4938_pcicptr /* default setting for TX4938 */
|
|
};
|
|
|
|
static struct {
|
|
unsigned long base;
|
|
unsigned long size;
|
|
} phys_regions[16] __initdata;
|
|
static int num_phys_regions __initdata;
|
|
|
|
#define PHYS_REGION_MINSIZE 0x10000
|
|
|
|
void rbtx4938_machine_halt(void)
|
|
{
|
|
printk(KERN_NOTICE "System Halted\n");
|
|
local_irq_disable();
|
|
|
|
while (1)
|
|
__asm__(".set\tmips3\n\t"
|
|
"wait\n\t"
|
|
".set\tmips0");
|
|
}
|
|
|
|
void rbtx4938_machine_power_off(void)
|
|
{
|
|
rbtx4938_machine_halt();
|
|
/* no return */
|
|
}
|
|
|
|
void rbtx4938_machine_restart(char *command)
|
|
{
|
|
local_irq_disable();
|
|
|
|
printk("Rebooting...");
|
|
*rbtx4938_softresetlock_ptr = 1;
|
|
*rbtx4938_sfvol_ptr = 1;
|
|
*rbtx4938_softreset_ptr = 1;
|
|
wbflush();
|
|
|
|
while(1);
|
|
}
|
|
|
|
void __init
|
|
txboard_add_phys_region(unsigned long base, unsigned long size)
|
|
{
|
|
if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
|
|
printk("phys_region overflow\n");
|
|
return;
|
|
}
|
|
phys_regions[num_phys_regions].base = base;
|
|
phys_regions[num_phys_regions].size = size;
|
|
num_phys_regions++;
|
|
}
|
|
unsigned long __init
|
|
txboard_find_free_phys_region(unsigned long begin, unsigned long end,
|
|
unsigned long size)
|
|
{
|
|
unsigned long base;
|
|
int i;
|
|
|
|
for (base = begin / size * size; base < end; base += size) {
|
|
for (i = 0; i < num_phys_regions; i++) {
|
|
if (phys_regions[i].size &&
|
|
base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
|
|
base + (size - 1) >= phys_regions[i].base)
|
|
break;
|
|
}
|
|
if (i == num_phys_regions)
|
|
return base;
|
|
}
|
|
return 0;
|
|
}
|
|
unsigned long __init
|
|
txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
|
|
unsigned long *size)
|
|
{
|
|
unsigned long sz, base;
|
|
for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
|
|
base = txboard_find_free_phys_region(begin, end, sz);
|
|
if (base) {
|
|
*size = sz;
|
|
return base;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
unsigned long __init
|
|
txboard_request_phys_region_range(unsigned long begin, unsigned long end,
|
|
unsigned long size)
|
|
{
|
|
unsigned long base;
|
|
base = txboard_find_free_phys_region(begin, end, size);
|
|
if (base)
|
|
txboard_add_phys_region(base, size);
|
|
return base;
|
|
}
|
|
unsigned long __init
|
|
txboard_request_phys_region(unsigned long size)
|
|
{
|
|
unsigned long base;
|
|
unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
|
|
base = txboard_find_free_phys_region(begin, end, size);
|
|
if (base)
|
|
txboard_add_phys_region(base, size);
|
|
return base;
|
|
}
|
|
unsigned long __init
|
|
txboard_request_phys_region_shrink(unsigned long *size)
|
|
{
|
|
unsigned long base;
|
|
unsigned long begin = 0, end = 0x20000000; /* search low 512MB */
|
|
base = txboard_find_free_phys_region_shrink(begin, end, size);
|
|
if (base)
|
|
txboard_add_phys_region(base, *size);
|
|
return base;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void __init
|
|
tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
|
|
struct pci_controller *channel,
|
|
unsigned long pci_io_base,
|
|
int extarb)
|
|
{
|
|
int i;
|
|
|
|
/* Disable All Initiator Space */
|
|
pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
|
|
TX4938_PCIC_PCICCFG_G2PMEN(1)|
|
|
TX4938_PCIC_PCICCFG_G2PMEN(2)|
|
|
TX4938_PCIC_PCICCFG_G2PIOEN);
|
|
|
|
/* GB->PCI mappings */
|
|
pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
|
|
pcicptr->g2piogbase = pci_io_base |
|
|
#ifdef __BIG_ENDIAN
|
|
TX4938_PCIC_G2PIOGBASE_ECHG
|
|
#else
|
|
TX4938_PCIC_G2PIOGBASE_BSDIS
|
|
#endif
|
|
;
|
|
pcicptr->g2piopbase = 0;
|
|
for (i = 0; i < 3; i++) {
|
|
pcicptr->g2pmmask[i] = 0;
|
|
pcicptr->g2pmgbase[i] = 0;
|
|
pcicptr->g2pmpbase[i] = 0;
|
|
}
|
|
if (channel->mem_resource->end) {
|
|
pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
|
|
pcicptr->g2pmgbase[0] = channel->mem_resource->start |
|
|
#ifdef __BIG_ENDIAN
|
|
TX4938_PCIC_G2PMnGBASE_ECHG
|
|
#else
|
|
TX4938_PCIC_G2PMnGBASE_BSDIS
|
|
#endif
|
|
;
|
|
pcicptr->g2pmpbase[0] = channel->mem_resource->start;
|
|
}
|
|
/* PCI->GB mappings (I/O 256B) */
|
|
pcicptr->p2giopbase = 0; /* 256B */
|
|
pcicptr->p2giogbase = 0;
|
|
/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
|
|
pcicptr->p2gm0plbase = 0;
|
|
pcicptr->p2gm0pubase = 0;
|
|
pcicptr->p2gmgbase[0] = 0 |
|
|
TX4938_PCIC_P2GMnGBASE_TMEMEN |
|
|
#ifdef __BIG_ENDIAN
|
|
TX4938_PCIC_P2GMnGBASE_TECHG
|
|
#else
|
|
TX4938_PCIC_P2GMnGBASE_TBSDIS
|
|
#endif
|
|
;
|
|
/* PCI->GB mappings (MEM 16MB) */
|
|
pcicptr->p2gm1plbase = 0xffffffff;
|
|
pcicptr->p2gm1pubase = 0xffffffff;
|
|
pcicptr->p2gmgbase[1] = 0;
|
|
/* PCI->GB mappings (MEM 1MB) */
|
|
pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
|
|
pcicptr->p2gmgbase[2] = 0;
|
|
|
|
pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
|
|
/* Enable Initiator Memory Space */
|
|
if (channel->mem_resource->end)
|
|
pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
|
|
/* Enable Initiator I/O Space */
|
|
if (channel->io_resource->end)
|
|
pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
|
|
/* Enable Initiator Config */
|
|
pcicptr->pciccfg |=
|
|
TX4938_PCIC_PCICCFG_ICAEN |
|
|
TX4938_PCIC_PCICCFG_TCAR;
|
|
|
|
/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
|
|
pcicptr->pcicfg1 = 0;
|
|
|
|
pcicptr->g2ptocnt &= ~0xffff;
|
|
|
|
if (tx4938_pcic_trdyto >= 0) {
|
|
pcicptr->g2ptocnt &= ~0xff;
|
|
pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
|
|
}
|
|
|
|
if (tx4938_pcic_retryto >= 0) {
|
|
pcicptr->g2ptocnt &= ~0xff00;
|
|
pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
|
|
}
|
|
|
|
/* Clear All Local Bus Status */
|
|
pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
|
|
/* Enable All Local Bus Interrupts */
|
|
pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
|
|
/* Clear All Initiator Status */
|
|
pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
|
|
/* Enable All Initiator Interrupts */
|
|
pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
|
|
/* Clear All PCI Status Error */
|
|
pcicptr->pcistatus =
|
|
(pcicptr->pcistatus & 0x0000ffff) |
|
|
(TX4938_PCIC_PCISTATUS_ALL << 16);
|
|
/* Enable All PCI Status Error Interrupts */
|
|
pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
|
|
|
|
if (!extarb) {
|
|
/* Reset Bus Arbiter */
|
|
pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
|
|
pcicptr->pbabm = 0;
|
|
/* Enable Bus Arbiter */
|
|
pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
|
|
}
|
|
|
|
/* PCIC Int => IRC IRQ16 */
|
|
pcicptr->pcicfg2 =
|
|
(pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
|
|
|
|
pcicptr->pcistatus = PCI_COMMAND_MASTER |
|
|
PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
|
|
}
|
|
|
|
int __init
|
|
tx4938_report_pciclk(void)
|
|
{
|
|
unsigned long pcode = TX4938_REV_PCODE();
|
|
int pciclk = 0;
|
|
printk("TX%lx PCIC --%s PCICLK:",
|
|
pcode,
|
|
(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
|
|
if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
|
|
|
|
switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
|
|
case TX4938_CCFG_PCIDIVMODE_4:
|
|
pciclk = txx9_cpu_clock / 4; break;
|
|
case TX4938_CCFG_PCIDIVMODE_4_5:
|
|
pciclk = txx9_cpu_clock * 2 / 9; break;
|
|
case TX4938_CCFG_PCIDIVMODE_5:
|
|
pciclk = txx9_cpu_clock / 5; break;
|
|
case TX4938_CCFG_PCIDIVMODE_5_5:
|
|
pciclk = txx9_cpu_clock * 2 / 11; break;
|
|
case TX4938_CCFG_PCIDIVMODE_8:
|
|
pciclk = txx9_cpu_clock / 8; break;
|
|
case TX4938_CCFG_PCIDIVMODE_9:
|
|
pciclk = txx9_cpu_clock / 9; break;
|
|
case TX4938_CCFG_PCIDIVMODE_10:
|
|
pciclk = txx9_cpu_clock / 10; break;
|
|
case TX4938_CCFG_PCIDIVMODE_11:
|
|
pciclk = txx9_cpu_clock / 11; break;
|
|
}
|
|
printk("Internal(%dMHz)", pciclk / 1000000);
|
|
} else {
|
|
printk("External");
|
|
pciclk = -1;
|
|
}
|
|
printk("\n");
|
|
return pciclk;
|
|
}
|
|
|
|
void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
|
|
{
|
|
pcicptrs[ch] = pcicptr;
|
|
}
|
|
|
|
struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
|
|
{
|
|
return pcicptrs[ch];
|
|
}
|
|
|
|
static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
|
|
int top_bus, int busnr, int devfn)
|
|
{
|
|
static struct pci_dev dev;
|
|
static struct pci_bus bus;
|
|
|
|
dev.sysdata = (void *)hose;
|
|
dev.devfn = devfn;
|
|
bus.number = busnr;
|
|
bus.ops = hose->pci_ops;
|
|
bus.parent = NULL;
|
|
dev.bus = &bus;
|
|
|
|
return &dev;
|
|
}
|
|
|
|
#define EARLY_PCI_OP(rw, size, type) \
|
|
static int early_##rw##_config_##size(struct pci_controller *hose, \
|
|
int top_bus, int bus, int devfn, int offset, type value) \
|
|
{ \
|
|
return pci_##rw##_config_##size( \
|
|
fake_pci_dev(hose, top_bus, bus, devfn), \
|
|
offset, value); \
|
|
}
|
|
|
|
EARLY_PCI_OP(read, word, u16 *)
|
|
|
|
int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
|
|
{
|
|
u32 pci_devfn;
|
|
unsigned short vid;
|
|
int devfn_start = 0;
|
|
int devfn_stop = 0xff;
|
|
int cap66 = -1;
|
|
u16 stat;
|
|
|
|
printk("PCI: Checking 66MHz capabilities...\n");
|
|
|
|
for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
|
|
early_read_config_word(hose, top_bus, current_bus, pci_devfn,
|
|
PCI_VENDOR_ID, &vid);
|
|
|
|
if (vid == 0xffff) continue;
|
|
|
|
/* check 66MHz capability */
|
|
if (cap66 < 0)
|
|
cap66 = 1;
|
|
if (cap66) {
|
|
early_read_config_word(hose, top_bus, current_bus, pci_devfn,
|
|
PCI_STATUS, &stat);
|
|
if (!(stat & PCI_STATUS_66MHZ)) {
|
|
printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
|
|
current_bus, pci_devfn);
|
|
cap66 = 0;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
return cap66 > 0;
|
|
}
|
|
|
|
int __init
|
|
tx4938_pciclk66_setup(void)
|
|
{
|
|
int pciclk;
|
|
|
|
/* Assert M66EN */
|
|
tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
|
|
/* Double PCICLK (if possible) */
|
|
if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
|
|
unsigned int pcidivmode =
|
|
tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
|
|
switch (pcidivmode) {
|
|
case TX4938_CCFG_PCIDIVMODE_8:
|
|
case TX4938_CCFG_PCIDIVMODE_4:
|
|
pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
|
|
pciclk = txx9_cpu_clock / 4;
|
|
break;
|
|
case TX4938_CCFG_PCIDIVMODE_9:
|
|
case TX4938_CCFG_PCIDIVMODE_4_5:
|
|
pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
|
|
pciclk = txx9_cpu_clock * 2 / 9;
|
|
break;
|
|
case TX4938_CCFG_PCIDIVMODE_10:
|
|
case TX4938_CCFG_PCIDIVMODE_5:
|
|
pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
|
|
pciclk = txx9_cpu_clock / 5;
|
|
break;
|
|
case TX4938_CCFG_PCIDIVMODE_11:
|
|
case TX4938_CCFG_PCIDIVMODE_5_5:
|
|
default:
|
|
pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
|
|
pciclk = txx9_cpu_clock * 2 / 11;
|
|
break;
|
|
}
|
|
tx4938_ccfgptr->ccfg =
|
|
(tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
|
|
| pcidivmode;
|
|
printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
|
|
(unsigned long)tx4938_ccfgptr->ccfg);
|
|
} else {
|
|
pciclk = -1;
|
|
}
|
|
return pciclk;
|
|
}
|
|
|
|
extern struct pci_controller tx4938_pci_controller[];
|
|
static int __init tx4938_pcibios_init(void)
|
|
{
|
|
unsigned long mem_base[2];
|
|
unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0,TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
|
|
unsigned long io_base[2];
|
|
unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0,TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
|
|
/* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
|
|
int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
|
|
|
|
PCIBIOS_MIN_IO = 0x00001000UL;
|
|
PCIBIOS_MIN_MEM = 0x01000000UL;
|
|
|
|
mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
|
|
io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
|
|
|
|
printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
|
|
(unsigned short)(tx4938_pcicptr->pciid >> 16),
|
|
(unsigned short)(tx4938_pcicptr->pciid & 0xffff),
|
|
(unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
|
|
extarb ? "External" : "Internal");
|
|
|
|
/* setup PCI area */
|
|
tx4938_pci_controller[0].io_resource->start = io_base[0];
|
|
tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
|
|
tx4938_pci_controller[0].mem_resource->start = mem_base[0];
|
|
tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
|
|
|
|
set_tx4938_pcicptr(0, tx4938_pcicptr);
|
|
|
|
register_pci_controller(&tx4938_pci_controller[0]);
|
|
|
|
if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
|
|
printk("TX4938_CCFG_PCI66 already configured\n");
|
|
txboard_pci66_mode = -1; /* already configured */
|
|
}
|
|
|
|
/* Reset PCI Bus */
|
|
*rbtx4938_pcireset_ptr = 0;
|
|
/* Reset PCIC */
|
|
tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
|
|
if (txboard_pci66_mode > 0)
|
|
tx4938_pciclk66_setup();
|
|
mdelay(10);
|
|
/* clear PCIC reset */
|
|
tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
|
|
*rbtx4938_pcireset_ptr = 1;
|
|
wbflush();
|
|
tx4938_report_pcic_status1(tx4938_pcicptr);
|
|
|
|
tx4938_report_pciclk();
|
|
tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
|
|
if (txboard_pci66_mode == 0 &&
|
|
txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
|
|
/* Reset PCI Bus */
|
|
*rbtx4938_pcireset_ptr = 0;
|
|
/* Reset PCIC */
|
|
tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
|
|
tx4938_pciclk66_setup();
|
|
mdelay(10);
|
|
/* clear PCIC reset */
|
|
tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
|
|
*rbtx4938_pcireset_ptr = 1;
|
|
wbflush();
|
|
/* Reinitialize PCIC */
|
|
tx4938_report_pciclk();
|
|
tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
|
|
}
|
|
|
|
mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
|
|
io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
|
|
/* Reset PCIC1 */
|
|
tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
|
|
/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
|
|
if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
|
|
tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
|
|
else
|
|
tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
|
|
mdelay(10);
|
|
/* clear PCIC1 reset */
|
|
tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
|
|
tx4938_report_pcic_status1(tx4938_pcic1ptr);
|
|
|
|
printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
|
|
(unsigned short)(tx4938_pcic1ptr->pciid >> 16),
|
|
(unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
|
|
(unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
|
|
printk("%s PCICLK:%dMHz\n",
|
|
(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
|
|
txx9_gbus_clock /
|
|
((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
|
|
1000000);
|
|
|
|
/* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
|
|
tx4938_pci_controller[1].io_resource->start =
|
|
io_base[1] - io_base[0];
|
|
tx4938_pci_controller[1].io_resource->end =
|
|
io_base[1] - io_base[0] + io_size[1] - 1;
|
|
tx4938_pci_controller[1].mem_resource->start = mem_base[1];
|
|
tx4938_pci_controller[1].mem_resource->end =
|
|
mem_base[1] + mem_size[1] - 1;
|
|
set_tx4938_pcicptr(1, tx4938_pcic1ptr);
|
|
|
|
register_pci_controller(&tx4938_pci_controller[1]);
|
|
|
|
tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
|
|
|
|
/* map ioport 0 to PCI I/O space address 0 */
|
|
set_io_port_base(KSEG1 + io_base[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(tx4938_pcibios_init);
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/* SPI support */
|
|
|
|
/* chip select for SPI devices */
|
|
#define SEEPROM1_CS 7 /* PIO7 */
|
|
#define SEEPROM2_CS 0 /* IOC */
|
|
#define SEEPROM3_CS 1 /* IOC */
|
|
#define SRTC_CS 2 /* IOC */
|
|
|
|
static int rbtx4938_spi_cs_func(int chipid, int on)
|
|
{
|
|
unsigned char bit;
|
|
switch (chipid) {
|
|
case RBTX4938_SEEPROM1_CHIPID:
|
|
if (on)
|
|
tx4938_pioptr->dout &= ~(1 << SEEPROM1_CS);
|
|
else
|
|
tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
|
|
return 0;
|
|
break;
|
|
case RBTX4938_SEEPROM2_CHIPID:
|
|
bit = (1 << SEEPROM2_CS);
|
|
break;
|
|
case RBTX4938_SEEPROM3_CHIPID:
|
|
bit = (1 << SEEPROM3_CS);
|
|
break;
|
|
case RBTX4938_SRTC_CHIPID:
|
|
bit = (1 << SRTC_CS);
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
/* bit1,2,4 are low active, bit3 is high active */
|
|
*rbtx4938_spics_ptr =
|
|
(*rbtx4938_spics_ptr & ~bit) |
|
|
((on ? (bit ^ 0x0b) : ~(bit ^ 0x0b)) & bit);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len);
|
|
|
|
int rbtx4938_get_tx4938_ethaddr(struct pci_dev *dev, unsigned char *addr)
|
|
{
|
|
struct pci_controller *channel = (struct pci_controller *)dev->bus->sysdata;
|
|
static unsigned char dat[17];
|
|
static int read_dat = 0;
|
|
int ch = 0;
|
|
|
|
if (channel != &tx4938_pci_controller[1])
|
|
return -ENODEV;
|
|
/* TX4938 PCIC1 */
|
|
switch (PCI_SLOT(dev->devfn)) {
|
|
case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
|
|
ch = 0;
|
|
break;
|
|
case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
|
|
ch = 1;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
if (!read_dat) {
|
|
unsigned char sum;
|
|
int i;
|
|
read_dat = 1;
|
|
/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
|
|
if (spi_eeprom_read(RBTX4938_SEEPROM1_CHIPID,
|
|
0, dat, sizeof(dat))) {
|
|
printk(KERN_ERR "seeprom: read error.\n");
|
|
} else {
|
|
if (strcmp(dat, "MAC") != 0)
|
|
printk(KERN_WARNING "seeprom: bad signature.\n");
|
|
for (i = 0, sum = 0; i < sizeof(dat); i++)
|
|
sum += dat[i];
|
|
if (sum)
|
|
printk(KERN_WARNING "seeprom: bad checksum.\n");
|
|
}
|
|
}
|
|
memcpy(addr, &dat[4 + 6 * ch], 6);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
extern void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on));
|
|
static void __init rbtx4938_spi_setup(void)
|
|
{
|
|
/* set SPI_SEL */
|
|
tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
|
|
/* chip selects for SPI devices */
|
|
tx4938_pioptr->dout |= (1 << SEEPROM1_CS);
|
|
tx4938_pioptr->dir |= (1 << SEEPROM1_CS);
|
|
txx9_spi_init(TX4938_SPI_REG, rbtx4938_spi_cs_func);
|
|
}
|
|
|
|
static struct resource rbtx4938_fpga_resource;
|
|
|
|
static char pcode_str[8];
|
|
static struct resource tx4938_reg_resource = {
|
|
pcode_str, TX4938_REG_BASE, TX4938_REG_BASE+TX4938_REG_SIZE, IORESOURCE_MEM
|
|
};
|
|
|
|
void __init tx4938_board_setup(void)
|
|
{
|
|
int i;
|
|
unsigned long divmode;
|
|
int cpuclk = 0;
|
|
unsigned long pcode = TX4938_REV_PCODE();
|
|
|
|
ioport_resource.start = 0x1000;
|
|
ioport_resource.end = 0xffffffff;
|
|
iomem_resource.start = 0x1000;
|
|
iomem_resource.end = 0xffffffff; /* expand to 4GB */
|
|
|
|
sprintf(pcode_str, "TX%lx", pcode);
|
|
/* SDRAMC,EBUSC are configured by PROM */
|
|
for (i = 0; i < 8; i++) {
|
|
if (!(tx4938_ebuscptr->cr[i] & 0x8))
|
|
continue; /* disabled */
|
|
rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
|
|
txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
|
|
}
|
|
|
|
/* clocks */
|
|
if (txx9_master_clock) {
|
|
/* calculate gbus_clock and cpu_clock from master_clock */
|
|
divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
|
|
switch (divmode) {
|
|
case TX4938_CCFG_DIVMODE_8:
|
|
case TX4938_CCFG_DIVMODE_10:
|
|
case TX4938_CCFG_DIVMODE_12:
|
|
case TX4938_CCFG_DIVMODE_16:
|
|
case TX4938_CCFG_DIVMODE_18:
|
|
txx9_gbus_clock = txx9_master_clock * 4; break;
|
|
default:
|
|
txx9_gbus_clock = txx9_master_clock;
|
|
}
|
|
switch (divmode) {
|
|
case TX4938_CCFG_DIVMODE_2:
|
|
case TX4938_CCFG_DIVMODE_8:
|
|
cpuclk = txx9_gbus_clock * 2; break;
|
|
case TX4938_CCFG_DIVMODE_2_5:
|
|
case TX4938_CCFG_DIVMODE_10:
|
|
cpuclk = txx9_gbus_clock * 5 / 2; break;
|
|
case TX4938_CCFG_DIVMODE_3:
|
|
case TX4938_CCFG_DIVMODE_12:
|
|
cpuclk = txx9_gbus_clock * 3; break;
|
|
case TX4938_CCFG_DIVMODE_4:
|
|
case TX4938_CCFG_DIVMODE_16:
|
|
cpuclk = txx9_gbus_clock * 4; break;
|
|
case TX4938_CCFG_DIVMODE_4_5:
|
|
case TX4938_CCFG_DIVMODE_18:
|
|
cpuclk = txx9_gbus_clock * 9 / 2; break;
|
|
}
|
|
txx9_cpu_clock = cpuclk;
|
|
} else {
|
|
if (txx9_cpu_clock == 0) {
|
|
txx9_cpu_clock = 300000000; /* 300MHz */
|
|
}
|
|
/* calculate gbus_clock and master_clock from cpu_clock */
|
|
cpuclk = txx9_cpu_clock;
|
|
divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
|
|
switch (divmode) {
|
|
case TX4938_CCFG_DIVMODE_2:
|
|
case TX4938_CCFG_DIVMODE_8:
|
|
txx9_gbus_clock = cpuclk / 2; break;
|
|
case TX4938_CCFG_DIVMODE_2_5:
|
|
case TX4938_CCFG_DIVMODE_10:
|
|
txx9_gbus_clock = cpuclk * 2 / 5; break;
|
|
case TX4938_CCFG_DIVMODE_3:
|
|
case TX4938_CCFG_DIVMODE_12:
|
|
txx9_gbus_clock = cpuclk / 3; break;
|
|
case TX4938_CCFG_DIVMODE_4:
|
|
case TX4938_CCFG_DIVMODE_16:
|
|
txx9_gbus_clock = cpuclk / 4; break;
|
|
case TX4938_CCFG_DIVMODE_4_5:
|
|
case TX4938_CCFG_DIVMODE_18:
|
|
txx9_gbus_clock = cpuclk * 2 / 9; break;
|
|
}
|
|
switch (divmode) {
|
|
case TX4938_CCFG_DIVMODE_8:
|
|
case TX4938_CCFG_DIVMODE_10:
|
|
case TX4938_CCFG_DIVMODE_12:
|
|
case TX4938_CCFG_DIVMODE_16:
|
|
case TX4938_CCFG_DIVMODE_18:
|
|
txx9_master_clock = txx9_gbus_clock / 4; break;
|
|
default:
|
|
txx9_master_clock = txx9_gbus_clock;
|
|
}
|
|
}
|
|
/* change default value to udelay/mdelay take reasonable time */
|
|
loops_per_jiffy = txx9_cpu_clock / HZ / 2;
|
|
|
|
/* CCFG */
|
|
/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
|
|
tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
|
|
/* clear PCIC1 reset */
|
|
if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
|
|
tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
|
|
|
|
/* enable Timeout BusError */
|
|
if (tx4938_ccfg_toeon)
|
|
tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
|
|
|
|
/* DMA selection */
|
|
tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
|
|
|
|
/* Use external clock for external arbiter */
|
|
if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
|
|
tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
|
|
|
|
printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
|
|
pcode_str,
|
|
cpuclk / 1000000, txx9_master_clock / 1000000,
|
|
(unsigned long)tx4938_ccfgptr->crir,
|
|
tx4938_ccfgptr->ccfg,
|
|
tx4938_ccfgptr->pcfg);
|
|
|
|
printk("%s SDRAMC --", pcode_str);
|
|
for (i = 0; i < 4; i++) {
|
|
unsigned long long cr = tx4938_sdramcptr->cr[i];
|
|
unsigned long ram_base, ram_size;
|
|
if (!((unsigned long)cr & 0x00000400))
|
|
continue; /* disabled */
|
|
ram_base = (unsigned long)(cr >> 49) << 21;
|
|
ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
|
|
if (ram_base >= 0x20000000)
|
|
continue; /* high memory (ignore) */
|
|
printk(" CR%d:%016Lx", i, cr);
|
|
txboard_add_phys_region(ram_base, ram_size);
|
|
}
|
|
printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
|
|
|
|
/* SRAM */
|
|
if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
|
|
unsigned int size = 0x800;
|
|
unsigned long base =
|
|
(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
|
|
txboard_add_phys_region(base, size);
|
|
}
|
|
|
|
/* IRC */
|
|
/* disable interrupt control */
|
|
tx4938_ircptr->cer = 0;
|
|
|
|
/* TMR */
|
|
/* disable all timers */
|
|
for (i = 0; i < TX4938_NR_TMR; i++) {
|
|
tx4938_tmrptr(i)->tcr = 0x00000020;
|
|
tx4938_tmrptr(i)->tisr = 0;
|
|
tx4938_tmrptr(i)->cpra = 0xffffffff;
|
|
tx4938_tmrptr(i)->itmr = 0;
|
|
tx4938_tmrptr(i)->ccdr = 0;
|
|
tx4938_tmrptr(i)->pgmr = 0;
|
|
}
|
|
|
|
/* enable DMA */
|
|
TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
|
|
TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN);
|
|
|
|
/* PIO */
|
|
tx4938_pioptr->maskcpu = 0;
|
|
tx4938_pioptr->maskext = 0;
|
|
|
|
/* TX4938 internal registers */
|
|
if (request_resource(&iomem_resource, &tx4938_reg_resource))
|
|
printk("request resource for internal registers failed\n");
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
|
|
{
|
|
unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
|
|
unsigned long g2pstatus = pcicptr->g2pstatus;
|
|
unsigned long pcicstatus = pcicptr->pcicstatus;
|
|
static struct {
|
|
unsigned long flag;
|
|
const char *str;
|
|
} pcistat_tbl[] = {
|
|
{ PCI_STATUS_DETECTED_PARITY, "DetectedParityError" },
|
|
{ PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" },
|
|
{ PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" },
|
|
{ PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" },
|
|
{ PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" },
|
|
{ PCI_STATUS_PARITY, "MasterParityError" },
|
|
}, g2pstat_tbl[] = {
|
|
{ TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" },
|
|
{ TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" },
|
|
}, pcicstat_tbl[] = {
|
|
{ TX4938_PCIC_PCICSTATUS_PME, "PME" },
|
|
{ TX4938_PCIC_PCICSTATUS_TLB, "TLB" },
|
|
{ TX4938_PCIC_PCICSTATUS_NIB, "NIB" },
|
|
{ TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" },
|
|
{ TX4938_PCIC_PCICSTATUS_PERR, "PERR" },
|
|
{ TX4938_PCIC_PCICSTATUS_SERR, "SERR" },
|
|
{ TX4938_PCIC_PCICSTATUS_GBE, "GBE" },
|
|
{ TX4938_PCIC_PCICSTATUS_IWB, "IWB" },
|
|
};
|
|
int i;
|
|
|
|
printk("pcistat:%04x(", pcistatus);
|
|
for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
|
|
if (pcistatus & pcistat_tbl[i].flag)
|
|
printk("%s ", pcistat_tbl[i].str);
|
|
printk("), g2pstatus:%08lx(", g2pstatus);
|
|
for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
|
|
if (g2pstatus & g2pstat_tbl[i].flag)
|
|
printk("%s ", g2pstat_tbl[i].str);
|
|
printk("), pcicstatus:%08lx(", pcicstatus);
|
|
for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
|
|
if (pcicstatus & pcicstat_tbl[i].flag)
|
|
printk("%s ", pcicstat_tbl[i].str);
|
|
printk(")\n");
|
|
}
|
|
|
|
void tx4938_report_pcic_status(void)
|
|
{
|
|
int i;
|
|
struct tx4938_pcic_reg *pcicptr;
|
|
for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
|
|
tx4938_report_pcic_status1(pcicptr);
|
|
}
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/* We use onchip r4k counter or TMR timer as our system wide timer
|
|
* interrupt running at 100HZ. */
|
|
|
|
extern void __init rtc_rx5c348_init(int chipid);
|
|
void __init rbtx4938_time_init(void)
|
|
{
|
|
rtc_rx5c348_init(RBTX4938_SRTC_CHIPID);
|
|
mips_hpt_frequency = txx9_cpu_clock / 2;
|
|
}
|
|
|
|
void __init toshiba_rbtx4938_setup(void)
|
|
{
|
|
unsigned long long pcfg;
|
|
char *argptr;
|
|
|
|
iomem_resource.end = 0xffffffff; /* 4GB */
|
|
|
|
if (txx9_master_clock == 0)
|
|
txx9_master_clock = 25000000; /* 25MHz */
|
|
tx4938_board_setup();
|
|
/* setup irq stuff */
|
|
TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000); /* irq trigger */
|
|
TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000); /* irq trigger */
|
|
/* setup serial stuff */
|
|
TX4938_WR(0xff1ff314, 0x00000000); /* h/w flow control off */
|
|
TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */
|
|
|
|
#ifndef CONFIG_PCI
|
|
set_io_port_base(RBTX4938_ETHER_BASE);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_TXX9
|
|
{
|
|
extern int early_serial_txx9_setup(struct uart_port *port);
|
|
int i;
|
|
struct uart_port req;
|
|
for(i = 0; i < 2; i++) {
|
|
memset(&req, 0, sizeof(req));
|
|
req.line = i;
|
|
req.iotype = UPIO_MEM;
|
|
req.membase = (char *)(0xff1ff300 + i * 0x100);
|
|
req.mapbase = 0xff1ff300 + i * 0x100;
|
|
req.irq = 32 + i;
|
|
req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
|
|
req.uartclk = 50000000;
|
|
early_serial_txx9_setup(&req);
|
|
}
|
|
}
|
|
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
|
|
argptr = prom_getcmdline();
|
|
if (strstr(argptr, "console=") == NULL) {
|
|
strcat(argptr, " console=ttyS0,38400");
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
|
|
printk("PIOSEL: disabling both ata and nand selection\n");
|
|
local_irq_disable();
|
|
tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
|
|
#endif
|
|
|
|
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
|
|
printk("PIOSEL: enabling nand selection\n");
|
|
tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
|
|
tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
|
|
#endif
|
|
|
|
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
|
|
printk("PIOSEL: enabling ata selection\n");
|
|
tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
|
|
tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
|
|
#endif
|
|
|
|
#ifdef CONFIG_IP_PNP
|
|
argptr = prom_getcmdline();
|
|
if (strstr(argptr, "ip=") == NULL) {
|
|
strcat(argptr, " ip=any");
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_FB
|
|
{
|
|
conswitchp = &dummy_con;
|
|
}
|
|
#endif
|
|
|
|
rbtx4938_spi_setup();
|
|
pcfg = tx4938_ccfgptr->pcfg; /* updated */
|
|
/* fixup piosel */
|
|
if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
|
|
TX4938_PCFG_ATA_SEL) {
|
|
*rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04;
|
|
}
|
|
else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
|
|
TX4938_PCFG_NDF_SEL) {
|
|
*rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08;
|
|
}
|
|
else {
|
|
*rbtx4938_piosel_ptr &= ~(0x08 | 0x04);
|
|
}
|
|
|
|
rbtx4938_fpga_resource.name = "FPGA Registers";
|
|
rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
|
|
rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
|
|
rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
|
|
printk("request resource for fpga failed\n");
|
|
|
|
/* disable all OnBoard I/O interrupts */
|
|
*rbtx4938_imask_ptr = 0;
|
|
|
|
_machine_restart = rbtx4938_machine_restart;
|
|
_machine_halt = rbtx4938_machine_halt;
|
|
_machine_power_off = rbtx4938_machine_power_off;
|
|
|
|
*rbtx4938_led_ptr = 0xff;
|
|
printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr);
|
|
printk(" DIPSW:%02x,%02x\n",
|
|
*rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr);
|
|
}
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid);
|
|
static int __init tx4938_spi_proc_setup(void)
|
|
{
|
|
struct proc_dir_entry *tx4938_spi_eeprom_dir;
|
|
|
|
tx4938_spi_eeprom_dir = proc_mkdir("spi_eeprom", 0);
|
|
|
|
if (!tx4938_spi_eeprom_dir)
|
|
return -ENOMEM;
|
|
|
|
/* don't allow user access to RBTX4938_SEEPROM1_CHIPID
|
|
* as it contains eth0 and eth1 MAC addresses
|
|
*/
|
|
spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM2_CHIPID);
|
|
spi_eeprom_proc_create(tx4938_spi_eeprom_dir, RBTX4938_SEEPROM3_CHIPID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
__initcall(tx4938_spi_proc_setup);
|
|
#endif
|