d2c8604121
The HPET in the ICH4M is not documented in the data sheet because it was not officially validated. While it is fine for hackers to continue to use "hpet=force" to enable the hardware that they have, it is not prudent to solicit additional "hpet=force" users on this hardware. [ Impact: remove hpet=force syslog message on old-ICH systems ] Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> LKML-Reference: <alpine.LFD.2.00.0904231918510.15843@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
496 lines
12 KiB
C
496 lines
12 KiB
C
/*
|
|
* This file contains work-arounds for x86 and x86_64 platform bugs.
|
|
*/
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/hpet.h>
|
|
|
|
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
|
|
|
|
static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
|
|
{
|
|
u8 config, rev;
|
|
u16 word;
|
|
|
|
/* BIOS may enable hardware IRQ balancing for
|
|
* E7520/E7320/E7525(revision ID 0x9 and below)
|
|
* based platforms.
|
|
* Disable SW irqbalance/affinity on those platforms.
|
|
*/
|
|
pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
|
|
if (rev > 0x9)
|
|
return;
|
|
|
|
/* enable access to config space*/
|
|
pci_read_config_byte(dev, 0xf4, &config);
|
|
pci_write_config_byte(dev, 0xf4, config|0x2);
|
|
|
|
/*
|
|
* read xTPR register. We may not have a pci_dev for device 8
|
|
* because it might be hidden until the above write.
|
|
*/
|
|
pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
|
|
|
|
if (!(word & (1 << 13))) {
|
|
dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
|
|
"disabling irq balancing and affinity\n");
|
|
noirqdebug_setup("");
|
|
#ifdef CONFIG_PROC_FS
|
|
no_irq_affinity = 1;
|
|
#endif
|
|
}
|
|
|
|
/* put back the original value for config space*/
|
|
if (!(config & 0x2))
|
|
pci_write_config_byte(dev, 0xf4, config);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH,
|
|
quirk_intel_irqbalance);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH,
|
|
quirk_intel_irqbalance);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH,
|
|
quirk_intel_irqbalance);
|
|
#endif
|
|
|
|
#if defined(CONFIG_HPET_TIMER)
|
|
unsigned long force_hpet_address;
|
|
|
|
static enum {
|
|
NONE_FORCE_HPET_RESUME,
|
|
OLD_ICH_FORCE_HPET_RESUME,
|
|
ICH_FORCE_HPET_RESUME,
|
|
VT8237_FORCE_HPET_RESUME,
|
|
NVIDIA_FORCE_HPET_RESUME,
|
|
ATI_FORCE_HPET_RESUME,
|
|
} force_hpet_resume_type;
|
|
|
|
static void __iomem *rcba_base;
|
|
|
|
static void ich_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
|
|
if (!force_hpet_address)
|
|
return;
|
|
|
|
BUG_ON(rcba_base == NULL);
|
|
|
|
/* read the Function Disable register, dword mode only */
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80)) {
|
|
/* HPET disabled in HPTC. Trying to enable */
|
|
writel(val | 0x80, rcba_base + 0x3404);
|
|
}
|
|
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80))
|
|
BUG();
|
|
else
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
|
|
return;
|
|
}
|
|
|
|
static void ich_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(rcba);
|
|
int err = 0;
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0xF0, &rcba);
|
|
rcba &= 0xFFFFC000;
|
|
if (rcba == 0) {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
|
|
"cannot force enable HPET\n");
|
|
return;
|
|
}
|
|
|
|
/* use bits 31:14, 16 kB aligned */
|
|
rcba_base = ioremap_nocache(rcba, 0x4000);
|
|
if (rcba_base == NULL) {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
|
|
"cannot force enable HPET\n");
|
|
return;
|
|
}
|
|
|
|
/* read the Function Disable register, dword mode only */
|
|
val = readl(rcba_base + 0x3404);
|
|
|
|
if (val & 0x80) {
|
|
/* HPET is enabled in HPTC. Just not reported by BIOS */
|
|
val = val & 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
iounmap(rcba_base);
|
|
return;
|
|
}
|
|
|
|
/* HPET disabled in HPTC. Trying to enable */
|
|
writel(val | 0x80, rcba_base + 0x3404);
|
|
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80)) {
|
|
err = 1;
|
|
} else {
|
|
val = val & 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
}
|
|
|
|
if (err) {
|
|
force_hpet_address = 0;
|
|
iounmap(rcba_base);
|
|
dev_printk(KERN_DEBUG, &dev->dev,
|
|
"Failed to force enable HPET\n");
|
|
} else {
|
|
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
}
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */
|
|
ich_force_enable_hpet);
|
|
|
|
static struct pci_dev *cached_dev;
|
|
|
|
static void hpet_print_force_info(void)
|
|
{
|
|
printk(KERN_INFO "HPET not enabled in BIOS. "
|
|
"You might try hpet=force boot option\n");
|
|
}
|
|
|
|
static void old_ich_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(gen_cntl);
|
|
|
|
if (!force_hpet_address || !cached_dev)
|
|
return;
|
|
|
|
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
|
|
gen_cntl &= (~(0x7 << 15));
|
|
gen_cntl |= (0x4 << 15);
|
|
|
|
pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
|
|
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val == 0x4)
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
static void old_ich_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(gen_cntl);
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0xD0, &gen_cntl);
|
|
/*
|
|
* Bit 17 is HPET enable bit.
|
|
* Bit 16:15 control the HPET base address.
|
|
*/
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val & 0x4) {
|
|
val &= 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* HPET is disabled. Trying enabling at FED00000 and check
|
|
* whether it sticks
|
|
*/
|
|
gen_cntl &= (~(0x7 << 15));
|
|
gen_cntl |= (0x4 << 15);
|
|
pci_write_config_dword(dev, 0xD0, gen_cntl);
|
|
|
|
pci_read_config_dword(dev, 0xD0, &gen_cntl);
|
|
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val & 0x4) {
|
|
/* HPET is enabled in HPTC. Just not reported by BIOS */
|
|
val &= 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
cached_dev = dev;
|
|
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
|
|
return;
|
|
}
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
|
|
}
|
|
|
|
/*
|
|
* Undocumented chipset features. Make sure that the user enforced
|
|
* this.
|
|
*/
|
|
static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
|
|
{
|
|
if (hpet_force_user)
|
|
old_ich_force_enable_hpet(dev);
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
|
|
old_ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
|
|
old_ich_force_enable_hpet);
|
|
|
|
|
|
static void vt8237_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
|
|
if (!force_hpet_address || !cached_dev)
|
|
return;
|
|
|
|
val = 0xfed00000 | 0x80;
|
|
pci_write_config_dword(cached_dev, 0x68, val);
|
|
|
|
pci_read_config_dword(cached_dev, 0x68, &val);
|
|
if (val & 0x80)
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
static void vt8237_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 uninitialized_var(val);
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
if (!hpet_force_user) {
|
|
hpet_print_force_info();
|
|
return;
|
|
}
|
|
|
|
pci_read_config_dword(dev, 0x68, &val);
|
|
/*
|
|
* Bit 7 is HPET enable bit.
|
|
* Bit 31:10 is HPET base address (contrary to what datasheet claims)
|
|
*/
|
|
if (val & 0x80) {
|
|
force_hpet_address = (val & ~0x3ff);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* HPET is disabled. Trying enabling at FED00000 and check
|
|
* whether it sticks
|
|
*/
|
|
val = 0xfed00000 | 0x80;
|
|
pci_write_config_dword(dev, 0x68, val);
|
|
|
|
pci_read_config_dword(dev, 0x68, &val);
|
|
if (val & 0x80) {
|
|
force_hpet_address = (val & ~0x3ff);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
cached_dev = dev;
|
|
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
|
|
return;
|
|
}
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
|
|
vt8237_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
|
|
vt8237_force_enable_hpet);
|
|
|
|
static void ati_force_hpet_resume(void)
|
|
{
|
|
pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
}
|
|
|
|
static u32 ati_ixp4x0_rev(struct pci_dev *dev)
|
|
{
|
|
u32 d;
|
|
u8 b;
|
|
|
|
pci_read_config_byte(dev, 0xac, &b);
|
|
b &= ~(1<<5);
|
|
pci_write_config_byte(dev, 0xac, b);
|
|
pci_read_config_dword(dev, 0x70, &d);
|
|
d |= 1<<8;
|
|
pci_write_config_dword(dev, 0x70, d);
|
|
pci_read_config_dword(dev, 0x8, &d);
|
|
d &= 0xff;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
|
|
return d;
|
|
}
|
|
|
|
static void ati_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 d, val;
|
|
u8 b;
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
if (!hpet_force_user) {
|
|
hpet_print_force_info();
|
|
return;
|
|
}
|
|
|
|
d = ati_ixp4x0_rev(dev);
|
|
if (d < 0x82)
|
|
return;
|
|
|
|
/* base address */
|
|
pci_write_config_dword(dev, 0x14, 0xfed00000);
|
|
pci_read_config_dword(dev, 0x14, &val);
|
|
|
|
/* enable interrupt */
|
|
outb(0x72, 0xcd6); b = inb(0xcd7);
|
|
b |= 0x1;
|
|
outb(0x72, 0xcd6); outb(b, 0xcd7);
|
|
outb(0x72, 0xcd6); b = inb(0xcd7);
|
|
if (!(b & 0x1))
|
|
return;
|
|
pci_read_config_dword(dev, 0x64, &d);
|
|
d |= (1<<10);
|
|
pci_write_config_dword(dev, 0x64, d);
|
|
pci_read_config_dword(dev, 0x64, &d);
|
|
if (!(d & (1<<10)))
|
|
return;
|
|
|
|
force_hpet_address = val;
|
|
force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
cached_dev = dev;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
|
|
ati_force_enable_hpet);
|
|
|
|
/*
|
|
* Undocumented chipset feature taken from LinuxBIOS.
|
|
*/
|
|
static void nvidia_force_hpet_resume(void)
|
|
{
|
|
pci_write_config_dword(cached_dev, 0x44, 0xfed00001);
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
}
|
|
|
|
static void nvidia_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 uninitialized_var(val);
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
if (!hpet_force_user) {
|
|
hpet_print_force_info();
|
|
return;
|
|
}
|
|
|
|
pci_write_config_dword(dev, 0x44, 0xfed00001);
|
|
pci_read_config_dword(dev, 0x44, &val);
|
|
force_hpet_address = val & 0xfffffffe;
|
|
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
cached_dev = dev;
|
|
return;
|
|
}
|
|
|
|
/* ISA Bridges */
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
|
|
nvidia_force_enable_hpet);
|
|
|
|
/* LPC bridges */
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367,
|
|
nvidia_force_enable_hpet);
|
|
|
|
void force_hpet_resume(void)
|
|
{
|
|
switch (force_hpet_resume_type) {
|
|
case ICH_FORCE_HPET_RESUME:
|
|
ich_force_hpet_resume();
|
|
return;
|
|
case OLD_ICH_FORCE_HPET_RESUME:
|
|
old_ich_force_hpet_resume();
|
|
return;
|
|
case VT8237_FORCE_HPET_RESUME:
|
|
vt8237_force_hpet_resume();
|
|
return;
|
|
case NVIDIA_FORCE_HPET_RESUME:
|
|
nvidia_force_hpet_resume();
|
|
return;
|
|
case ATI_FORCE_HPET_RESUME:
|
|
ati_force_hpet_resume();
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
#endif
|