d3561b7fa0
Create a paravirt.h header for all the critical operations which need to be
replaced with hypervisor calls, and include that instead of defining native
operations, when CONFIG_PARAVIRT.
This patch does the dumbest possible replacement of paravirtualized
instructions: calls through a "paravirt_ops" structure. Currently these are
function implementations of native hardware: hypervisors will override the ops
structure with their own variants.
All the pv-ops functions are declared "fastcall" so that a specific
register-based ABI is used, to make inlining assember easier.
And:
+From: Andy Whitcroft <apw@shadowen.org>
The paravirt ops introduce a 'weak' attribute onto memory_setup().
Code ordering leads to the following warnings on x86:
arch/i386/kernel/setup.c:651: warning: weak declaration of
`memory_setup' after first use results in unspecified behavior
Move memory_setup() to avoid this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
87 lines
3.1 KiB
Makefile
87 lines
3.1 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
extra-y := head.o init_task.o vmlinux.lds
|
|
|
|
obj-y := process.o signal.o entry.o traps.o irq.o \
|
|
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
|
|
pci-dma.o i386_ksyms.o i387.o bootflag.o e820.o\
|
|
quirks.o i8237.o topology.o alternative.o i8253.o tsc.o
|
|
|
|
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
|
obj-y += cpu/
|
|
obj-y += acpi/
|
|
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
|
|
obj-$(CONFIG_MCA) += mca.o
|
|
obj-$(CONFIG_X86_MSR) += msr.o
|
|
obj-$(CONFIG_X86_CPUID) += cpuid.o
|
|
obj-$(CONFIG_MICROCODE) += microcode.o
|
|
obj-$(CONFIG_APM) += apm.o
|
|
obj-$(CONFIG_X86_SMP) += smp.o smpboot.o
|
|
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
|
|
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
|
|
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
|
|
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
|
|
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o
|
|
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
|
|
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
|
|
obj-$(CONFIG_X86_NUMAQ) += numaq.o
|
|
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
obj-$(CONFIG_MODULES) += module.o
|
|
obj-y += sysenter.o vsyscall.o
|
|
obj-$(CONFIG_ACPI_SRAT) += srat.o
|
|
obj-$(CONFIG_HPET_TIMER) += time_hpet.o
|
|
obj-$(CONFIG_EFI) += efi.o efi_stub.o
|
|
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
|
|
obj-$(CONFIG_VM86) += vm86.o
|
|
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
|
obj-$(CONFIG_HPET_TIMER) += hpet.o
|
|
obj-$(CONFIG_K8_NB) += k8.o
|
|
obj-$(CONFIG_PARAVIRT) += paravirt.o
|
|
|
|
EXTRA_AFLAGS := -traditional
|
|
|
|
obj-$(CONFIG_SCx200) += scx200.o
|
|
|
|
# vsyscall.o contains the vsyscall DSO images as __initdata.
|
|
# We must build both images before we can assemble it.
|
|
# Note: kbuild does not track this dependency due to usage of .incbin
|
|
$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
|
|
targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
|
|
targets += vsyscall-note.o vsyscall.lds
|
|
|
|
# The DSO images are built using a special linker script.
|
|
quiet_cmd_syscall = SYSCALL $@
|
|
cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
|
|
-Wl,-T,$(filter-out FORCE,$^) -o $@
|
|
|
|
export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
|
|
|
|
vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
|
|
$(call ld-option, -Wl$(comma)--hash-style=sysv)
|
|
SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
|
|
SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
|
|
|
|
$(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so: \
|
|
$(obj)/vsyscall-%.so: $(src)/vsyscall.lds \
|
|
$(obj)/vsyscall-%.o $(obj)/vsyscall-note.o FORCE
|
|
$(call if_changed,syscall)
|
|
|
|
# We also create a special relocatable object that should mirror the symbol
|
|
# table and layout of the linked DSO. With ld -R we can then refer to
|
|
# these symbols in the kernel code rather than hand-coded addresses.
|
|
extra-y += vsyscall-syms.o
|
|
$(obj)/built-in.o: $(obj)/vsyscall-syms.o
|
|
$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
|
|
|
|
SYSCFLAGS_vsyscall-syms.o = -r
|
|
$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
|
|
$(obj)/vsyscall-sysenter.o $(obj)/vsyscall-note.o FORCE
|
|
$(call if_changed,syscall)
|
|
|
|
k8-y += ../../x86_64/kernel/k8.o
|
|
stacktrace-y += ../../x86_64/kernel/stacktrace.o
|
|
|