android_kernel_xiaomi_sm8350/drivers/scsi/aic94xx/aic94xx_reg_def.h
Wu, Gilbert 083d1631be [SCSI] aic94xx: update for v28 firmware
These changes work compatibly with the old V17 firmware

Contribution:

   Ed Chim <ed_chim@adaptec.com>
   Gilbert Wu <gilbert_wu@adaptec.com>

Change Log:

1.    Use dword instead of qword to display the value of Connection
State register for debug purpose.

2.    There are some registers location of AIC94xx chip has been changed
according to the new V28 firmware. The patch has redefined the register
location and provided initialization.

3.    The new sequencer firmware v28 for Aic94xx SAS/SATA Linux open
source device driver can be downloaded from
http://www.adaptec.com/NR/exeres/35B611BC-9789-4B5B-82C6-85A2CCA8A46A.htm

Signed-off-by: Gilbert Wu <gilbert_wu@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-03 13:54:14 -06:00

2400 lines
72 KiB
C

/*
* Aic94xx SAS/SATA driver hardware registers defintions.
*
* Copyright (C) 2004 Adaptec, Inc. All rights reserved.
* Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* Luben Tuikov: Some register value updates to make it work with the window
* agnostic register r/w functions. Some register corrections, sizes,
* etc.
*
* This file is licensed under GPLv2.
*
* This file is part of the aic94xx driver.
*
* The aic94xx driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* The aic94xx driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the aic94xx driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* $Id: //depot/aic94xx/aic94xx_reg_def.h#27 $
*
*/
#ifndef _ADP94XX_REG_DEF_H_
#define _ADP94XX_REG_DEF_H_
/*
* Common definitions.
*/
#define CSEQ_MODE_PAGE_SIZE 0x200 /* CSEQ mode page size */
#define LmSEQ_MODE_PAGE_SIZE 0x200 /* LmSEQ mode page size */
#define LmSEQ_HOST_REG_SIZE 0x4000 /* LmSEQ Host Register size */
/********************* COM_SAS registers definition *************************/
/* The base is REG_BASE_ADDR, defined in aic94xx_reg.h.
*/
/*
* CHIM Registers, Address Range : (0x00-0xFF)
*/
#define COMBIST (REG_BASE_ADDR + 0x00)
/* bits 31:24 */
#define L7BLKRST 0x80000000
#define L6BLKRST 0x40000000
#define L5BLKRST 0x20000000
#define L4BLKRST 0x10000000
#define L3BLKRST 0x08000000
#define L2BLKRST 0x04000000
#define L1BLKRST 0x02000000
#define L0BLKRST 0x01000000
#define LmBLKRST 0xFF000000
#define LmBLKRST_COMBIST(phyid) (1 << (24 + phyid))
#define OCMBLKRST 0x00400000
#define CTXMEMBLKRST 0x00200000
#define CSEQBLKRST 0x00100000
#define EXSIBLKRST 0x00040000
#define DPIBLKRST 0x00020000
#define DFIFBLKRST 0x00010000
#define HARDRST 0x00000200
#define COMBLKRST 0x00000100
#define FRCDFPERR 0x00000080
#define FRCCIOPERR 0x00000020
#define FRCBISTERR 0x00000010
#define COMBISTEN 0x00000004
#define COMBISTDONE 0x00000002 /* ro */
#define COMBISTFAIL 0x00000001 /* ro */
#define COMSTAT (REG_BASE_ADDR + 0x04)
#define REQMBXREAD 0x00000040
#define RSPMBXAVAIL 0x00000020
#define CSBUFPERR 0x00000008
#define OVLYERR 0x00000004
#define CSERR 0x00000002
#define OVLYDMADONE 0x00000001
#define COMSTAT_MASK (REQMBXREAD | RSPMBXAVAIL | \
CSBUFPERR | OVLYERR | CSERR |\
OVLYDMADONE)
#define COMSTATEN (REG_BASE_ADDR + 0x08)
#define EN_REQMBXREAD 0x00000040
#define EN_RSPMBXAVAIL 0x00000020
#define EN_CSBUFPERR 0x00000008
#define EN_OVLYERR 0x00000004
#define EN_CSERR 0x00000002
#define EN_OVLYDONE 0x00000001
#define SCBPRO (REG_BASE_ADDR + 0x0C)
#define SCBCONS_MASK 0xFFFF0000
#define SCBPRO_MASK 0x0000FFFF
#define CHIMREQMBX (REG_BASE_ADDR + 0x10)
#define CHIMRSPMBX (REG_BASE_ADDR + 0x14)
#define CHIMINT (REG_BASE_ADDR + 0x18)
#define EXT_INT0 0x00000800
#define EXT_INT1 0x00000400
#define PORRSTDET 0x00000200
#define HARDRSTDET 0x00000100
#define DLAVAILQ 0x00000080 /* ro */
#define HOSTERR 0x00000040
#define INITERR 0x00000020
#define DEVINT 0x00000010
#define COMINT 0x00000008
#define DEVTIMER2 0x00000004
#define DEVTIMER1 0x00000002
#define DLAVAIL 0x00000001
#define CHIMINT_MASK (HOSTERR | INITERR | DEVINT | COMINT |\
DEVTIMER2 | DEVTIMER1 | DLAVAIL)
#define DEVEXCEPT_MASK (HOSTERR | INITERR | DEVINT | COMINT)
#define CHIMINTEN (REG_BASE_ADDR + 0x1C)
#define RST_EN_EXT_INT1 0x01000000
#define RST_EN_EXT_INT0 0x00800000
#define RST_EN_HOSTERR 0x00400000
#define RST_EN_INITERR 0x00200000
#define RST_EN_DEVINT 0x00100000
#define RST_EN_COMINT 0x00080000
#define RST_EN_DEVTIMER2 0x00040000
#define RST_EN_DEVTIMER1 0x00020000
#define RST_EN_DLAVAIL 0x00010000
#define SET_EN_EXT_INT1 0x00000100
#define SET_EN_EXT_INT0 0x00000080
#define SET_EN_HOSTERR 0x00000040
#define SET_EN_INITERR 0x00000020
#define SET_EN_DEVINT 0x00000010
#define SET_EN_COMINT 0x00000008
#define SET_EN_DEVTIMER2 0x00000004
#define SET_EN_DEVTIMER1 0x00000002
#define SET_EN_DLAVAIL 0x00000001
#define RST_CHIMINTEN (RST_EN_HOSTERR | RST_EN_INITERR | \
RST_EN_DEVINT | RST_EN_COMINT | \
RST_EN_DEVTIMER2 | RST_EN_DEVTIMER1 |\
RST_EN_DLAVAIL)
#define SET_CHIMINTEN (SET_EN_HOSTERR | SET_EN_INITERR |\
SET_EN_DEVINT | SET_EN_COMINT |\
SET_EN_DLAVAIL)
#define OVLYDMACTL (REG_BASE_ADDR + 0x20)
#define OVLYADR_MASK 0x07FF0000
#define OVLYLSEQ_MASK 0x0000FF00
#define OVLYCSEQ 0x00000080
#define OVLYHALTERR 0x00000040
#define PIOCMODE 0x00000020
#define RESETOVLYDMA 0x00000008 /* wo */
#define STARTOVLYDMA 0x00000004
#define STOPOVLYDMA 0x00000002 /* wo */
#define OVLYDMAACT 0x00000001 /* ro */
#define OVLYDMACNT (REG_BASE_ADDR + 0x24)
#define OVLYDOMAIN1 0x20000000 /* ro */
#define OVLYDOMAIN0 0x10000000
#define OVLYBUFADR_MASK 0x007F0000
#define OVLYDMACNT_MASK 0x00003FFF
#define OVLYDMAADR (REG_BASE_ADDR + 0x28)
#define DMAERR (REG_BASE_ADDR + 0x30)
#define OVLYERRSTAT_MASK 0x0000FF00 /* ro */
#define CSERRSTAT_MASK 0x000000FF /* ro */
#define SPIODATA (REG_BASE_ADDR + 0x34)
/* 0x38 - 0x3C are reserved */
#define T1CNTRLR (REG_BASE_ADDR + 0x40)
#define T1DONE 0x00010000 /* ro */
#define TIMER64 0x00000400
#define T1ENABLE 0x00000200
#define T1RELOAD 0x00000100
#define T1PRESCALER_MASK 0x00000003
#define T1CMPR (REG_BASE_ADDR + 0x44)
#define T1CNTR (REG_BASE_ADDR + 0x48)
#define T2CNTRLR (REG_BASE_ADDR + 0x4C)
#define T2DONE 0x00010000 /* ro */
#define T2ENABLE 0x00000200
#define T2RELOAD 0x00000100
#define T2PRESCALER_MASK 0x00000003
#define T2CMPR (REG_BASE_ADDR + 0x50)
#define T2CNTR (REG_BASE_ADDR + 0x54)
/* 0x58h - 0xFCh are reserved */
/*
* DCH_SAS Registers, Address Range : (0x800-0xFFF)
*/
#define CMDCTXBASE (REG_BASE_ADDR + 0x800)
#define DEVCTXBASE (REG_BASE_ADDR + 0x808)
#define CTXDOMAIN (REG_BASE_ADDR + 0x810)
#define DEVCTXDOMAIN1 0x00000008 /* ro */
#define DEVCTXDOMAIN0 0x00000004
#define CMDCTXDOMAIN1 0x00000002 /* ro */
#define CMDCTXDOMAIN0 0x00000001
#define DCHCTL (REG_BASE_ADDR + 0x814)
#define OCMBISTREPAIR 0x00080000
#define OCMBISTEN 0x00040000
#define OCMBISTDN 0x00020000 /* ro */
#define OCMBISTFAIL 0x00010000 /* ro */
#define DDBBISTEN 0x00004000
#define DDBBISTDN 0x00002000 /* ro */
#define DDBBISTFAIL 0x00001000 /* ro */
#define SCBBISTEN 0x00000400
#define SCBBISTDN 0x00000200 /* ro */
#define SCBBISTFAIL 0x00000100 /* ro */
#define MEMSEL_MASK 0x000000E0
#define MEMSEL_CCM_LSEQ 0x00000000
#define MEMSEL_CCM_IOP 0x00000020
#define MEMSEL_CCM_SASCTL 0x00000040
#define MEMSEL_DCM_LSEQ 0x00000060
#define MEMSEL_DCM_IOP 0x00000080
#define MEMSEL_OCM 0x000000A0
#define FRCERR 0x00000010
#define AUTORLS 0x00000001
#define DCHREVISION (REG_BASE_ADDR + 0x818)
#define DCHREVISION_MASK 0x000000FF
#define DCHSTATUS (REG_BASE_ADDR + 0x81C)
#define EN_CFIFTOERR 0x00020000
#define CFIFTOERR 0x00000200
#define CSEQINT 0x00000100 /* ro */
#define LSEQ7INT 0x00000080 /* ro */
#define LSEQ6INT 0x00000040 /* ro */
#define LSEQ5INT 0x00000020 /* ro */
#define LSEQ4INT 0x00000010 /* ro */
#define LSEQ3INT 0x00000008 /* ro */
#define LSEQ2INT 0x00000004 /* ro */
#define LSEQ1INT 0x00000002 /* ro */
#define LSEQ0INT 0x00000001 /* ro */
#define LSEQINT_MASK (LSEQ7INT | LSEQ6INT | LSEQ5INT |\
LSEQ4INT | LSEQ3INT | LSEQ2INT |\
LSEQ1INT | LSEQ0INT)
#define DCHDFIFDEBUG (REG_BASE_ADDR + 0x820)
#define ENFAIRMST 0x00FF0000
#define DISWRMST9 0x00000200
#define DISWRMST8 0x00000100
#define DISRDMST 0x000000FF
#define ATOMICSTATCTL (REG_BASE_ADDR + 0x824)
/* 8 bit wide */
#define AUTOINC 0x80
#define ATOMICERR 0x04
#define ATOMICWIN 0x02
#define ATOMICDONE 0x01
#define ALTCIOADR (REG_BASE_ADDR + 0x828)
/* 16 bit; bits 8:0 define CIO addr space of CSEQ */
#define ASCBPTR (REG_BASE_ADDR + 0x82C)
/* 16 bit wide */
#define ADDBPTR (REG_BASE_ADDR + 0x82E)
/* 16 bit wide */
#define ANEWDATA (REG_BASE_ADDR + 0x830)
/* 16 bit */
#define AOLDDATA (REG_BASE_ADDR + 0x834)
/* 16 bit */
#define CTXACCESS (REG_BASE_ADDR + 0x838)
/* 32 bit */
/* 0x83Ch - 0xFFCh are reserved */
/*
* ARP2 External Processor Registers, Address Range : (0x00-0x1F)
*/
#define ARP2CTL 0x00
#define FRCSCRPERR 0x00040000
#define FRCARP2PERR 0x00020000
#define FRCARP2ILLOPC 0x00010000
#define ENWAITTO 0x00008000
#define PERRORDIS 0x00004000
#define FAILDIS 0x00002000
#define CIOPERRDIS 0x00001000
#define BREAKEN3 0x00000800
#define BREAKEN2 0x00000400
#define BREAKEN1 0x00000200
#define BREAKEN0 0x00000100
#define EPAUSE 0x00000008
#define PAUSED 0x00000004 /* ro */
#define STEP 0x00000002
#define ARP2RESET 0x00000001 /* wo */
#define ARP2INT 0x04
#define HALTCODE_MASK 0x00FF0000 /* ro */
#define ARP2WAITTO 0x00000100
#define ARP2HALTC 0x00000080
#define ARP2ILLOPC 0x00000040
#define ARP2PERR 0x00000020
#define ARP2CIOPERR 0x00000010
#define ARP2BREAK3 0x00000008
#define ARP2BREAK2 0x00000004
#define ARP2BREAK1 0x00000002
#define ARP2BREAK0 0x00000001
#define ARP2INTEN 0x08
#define EN_ARP2WAITTO 0x00000100
#define EN_ARP2HALTC 0x00000080
#define EN_ARP2ILLOPC 0x00000040
#define EN_ARP2PERR 0x00000020
#define EN_ARP2CIOPERR 0x00000010
#define EN_ARP2BREAK3 0x00000008
#define EN_ARP2BREAK2 0x00000004
#define EN_ARP2BREAK1 0x00000002
#define EN_ARP2BREAK0 0x00000001
#define ARP2BREAKADR01 0x0C
#define BREAKADR1_MASK 0x0FFF0000
#define BREAKADR0_MASK 0x00000FFF
#define ARP2BREAKADR23 0x10
#define BREAKADR3_MASK 0x0FFF0000
#define BREAKADR2_MASK 0x00000FFF
/* 0x14h - 0x1Ch are reserved */
/*
* ARP2 Registers, Address Range : (0x00-0x1F)
* The definitions have the same address offset for CSEQ and LmSEQ
* CIO Bus Registers.
*/
#define MODEPTR 0x00
#define DSTMODE 0xF0
#define SRCMODE 0x0F
#define ALTMODE 0x01
#define ALTDMODE 0xF0
#define ALTSMODE 0x0F
#define ATOMICXCHG 0x02
#define FLAG 0x04
#define INTCODE_MASK 0xF0
#define ALTMODEV2 0x04
#define CARRY_INT 0x02
#define CARRY 0x01
#define ARP2INTCTL 0x05
#define PAUSEDIS 0x80
#define RSTINTCTL 0x40
#define POPALTMODE 0x08
#define ALTMODEV 0x04
#define INTMASK 0x02
#define IRET 0x01
#define STACK 0x06
#define FUNCTION1 0x07
#define PRGMCNT 0x08
#define ACCUM 0x0A
#define SINDEX 0x0C
#define DINDEX 0x0E
#define ALLONES 0x10
#define ALLZEROS 0x11
#define SINDIR 0x12
#define DINDIR 0x13
#define JUMLDIR 0x14
#define ARP2HALTCODE 0x15
#define CURRADDR 0x16
#define LASTADDR 0x18
#define NXTLADDR 0x1A
#define DBGPORTPTR 0x1C
#define DBGPORT 0x1D
/*
* CIO Registers.
* The definitions have the same address offset for CSEQ and LmSEQ
* CIO Bus Registers.
*/
#define MnSCBPTR 0x20
#define MnDDBPTR 0x22
#define SCRATCHPAGE 0x24
#define MnSCRATCHPAGE 0x25
#define SCRATCHPAGESV 0x26
#define MnSCRATCHPAGESV 0x27
#define MnDMAERRS 0x46
#define MnSGDMAERRS 0x47
#define MnSGBUF 0x53
#define MnSGDMASTAT 0x5b
#define MnDDMACTL 0x5c /* RAZOR.rspec.fm rev 1.5 is wrong */
#define MnDDMASTAT 0x5d /* RAZOR.rspec.fm rev 1.5 is wrong */
#define MnDDMAMODE 0x5e /* RAZOR.rspec.fm rev 1.5 is wrong */
#define MnDMAENG 0x60
#define MnPIPECTL 0x61
#define MnSGBADR 0x65
#define MnSCB_SITE 0x100
#define MnDDB_SITE 0x180
/*
* The common definitions below have the same address offset for both
* CSEQ and LmSEQ.
*/
#define BISTCTL0 0x4C
#define BISTCTL1 0x50
#define MAPPEDSCR 0x800
/*
* CSEQ Host Register, Address Range : (0x000-0xFFC)
*/
#define CSEQ_HOST_REG_BASE_ADR 0xB8001000
#define CARP2CTL (CSEQ_HOST_REG_BASE_ADR + ARP2CTL)
#define CARP2INT (CSEQ_HOST_REG_BASE_ADR + ARP2INT)
#define CARP2INTEN (CSEQ_HOST_REG_BASE_ADR + ARP2INTEN)
#define CARP2BREAKADR01 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR01)
#define CARP2BREAKADR23 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR23)
#define CBISTCTL (CSEQ_HOST_REG_BASE_ADR + BISTCTL1)
#define CSEQRAMBISTEN 0x00000040
#define CSEQRAMBISTDN 0x00000020 /* ro */
#define CSEQRAMBISTFAIL 0x00000010 /* ro */
#define CSEQSCRBISTEN 0x00000004
#define CSEQSCRBISTDN 0x00000002 /* ro */
#define CSEQSCRBISTFAIL 0x00000001 /* ro */
#define CMAPPEDSCR (CSEQ_HOST_REG_BASE_ADR + MAPPEDSCR)
/*
* CSEQ CIO Bus Registers, Address Range : (0x0000-0x1FFC)
* 16 modes, each mode is 512 bytes.
* Unless specified, the register should valid for all modes.
*/
#define CSEQ_CIO_REG_BASE_ADR REG_BASE_ADDR_CSEQCIO
#define CSEQm_CIO_REG(Mode, Reg) \
(CSEQ_CIO_REG_BASE_ADR + \
((u32) (Mode) * CSEQ_MODE_PAGE_SIZE) + (u32) (Reg))
#define CMODEPTR (CSEQ_CIO_REG_BASE_ADR + MODEPTR)
#define CALTMODE (CSEQ_CIO_REG_BASE_ADR + ALTMODE)
#define CATOMICXCHG (CSEQ_CIO_REG_BASE_ADR + ATOMICXCHG)
#define CFLAG (CSEQ_CIO_REG_BASE_ADR + FLAG)
#define CARP2INTCTL (CSEQ_CIO_REG_BASE_ADR + ARP2INTCTL)
#define CSTACK (CSEQ_CIO_REG_BASE_ADR + STACK)
#define CFUNCTION1 (CSEQ_CIO_REG_BASE_ADR + FUNCTION1)
#define CPRGMCNT (CSEQ_CIO_REG_BASE_ADR + PRGMCNT)
#define CACCUM (CSEQ_CIO_REG_BASE_ADR + ACCUM)
#define CSINDEX (CSEQ_CIO_REG_BASE_ADR + SINDEX)
#define CDINDEX (CSEQ_CIO_REG_BASE_ADR + DINDEX)
#define CALLONES (CSEQ_CIO_REG_BASE_ADR + ALLONES)
#define CALLZEROS (CSEQ_CIO_REG_BASE_ADR + ALLZEROS)
#define CSINDIR (CSEQ_CIO_REG_BASE_ADR + SINDIR)
#define CDINDIR (CSEQ_CIO_REG_BASE_ADR + DINDIR)
#define CJUMLDIR (CSEQ_CIO_REG_BASE_ADR + JUMLDIR)
#define CARP2HALTCODE (CSEQ_CIO_REG_BASE_ADR + ARP2HALTCODE)
#define CCURRADDR (CSEQ_CIO_REG_BASE_ADR + CURRADDR)
#define CLASTADDR (CSEQ_CIO_REG_BASE_ADR + LASTADDR)
#define CNXTLADDR (CSEQ_CIO_REG_BASE_ADR + NXTLADDR)
#define CDBGPORTPTR (CSEQ_CIO_REG_BASE_ADR + DBGPORTPTR)
#define CDBGPORT (CSEQ_CIO_REG_BASE_ADR + DBGPORT)
#define CSCRATCHPAGE (CSEQ_CIO_REG_BASE_ADR + SCRATCHPAGE)
#define CMnSCBPTR(Mode) CSEQm_CIO_REG(Mode, MnSCBPTR)
#define CMnDDBPTR(Mode) CSEQm_CIO_REG(Mode, MnDDBPTR)
#define CMnSCRATCHPAGE(Mode) CSEQm_CIO_REG(Mode, MnSCRATCHPAGE)
#define CLINKCON (CSEQ_CIO_REG_BASE_ADR + 0x28)
#define CCIOAACESS (CSEQ_CIO_REG_BASE_ADR + 0x2C)
/* mode 0-7 */
#define MnREQMBX 0x30
#define CMnREQMBX(Mode) CSEQm_CIO_REG(Mode, 0x30)
/* mode 8 */
#define CSEQCON CSEQm_CIO_REG(8, 0x30)
/* mode 0-7 */
#define MnRSPMBX 0x34
#define CMnRSPMBX(Mode) CSEQm_CIO_REG(Mode, 0x34)
/* mode 8 */
#define CSEQCOMCTL CSEQm_CIO_REG(8, 0x34)
/* mode 8 */
#define CSEQCOMSTAT CSEQm_CIO_REG(8, 0x35)
/* mode 8 */
#define CSEQCOMINTEN CSEQm_CIO_REG(8, 0x36)
/* mode 8 */
#define CSEQCOMDMACTL CSEQm_CIO_REG(8, 0x37)
#define CSHALTERR 0x10
#define RESETCSDMA 0x08 /* wo */
#define STARTCSDMA 0x04
#define STOPCSDMA 0x02 /* wo */
#define CSDMAACT 0x01 /* ro */
/* mode 0-7 */
#define MnINT 0x38
#define CMnINT(Mode) CSEQm_CIO_REG(Mode, 0x38)
#define CMnREQMBXE 0x02
#define CMnRSPMBXF 0x01
#define CMnINT_MASK 0x00000003
/* mode 8 */
#define CSEQREQMBX CSEQm_CIO_REG(8, 0x38)
/* mode 0-7 */
#define MnINTEN 0x3C
#define CMnINTEN(Mode) CSEQm_CIO_REG(Mode, 0x3C)
#define EN_CMnRSPMBXF 0x01
/* mode 8 */
#define CSEQRSPMBX CSEQm_CIO_REG(8, 0x3C)
/* mode 8 */
#define CSDMAADR CSEQm_CIO_REG(8, 0x40)
/* mode 8 */
#define CSDMACNT CSEQm_CIO_REG(8, 0x48)
/* mode 8 */
#define CSEQDLCTL CSEQm_CIO_REG(8, 0x4D)
#define DONELISTEND 0x10
#define DONELISTSIZE_MASK 0x0F
#define DONELISTSIZE_8ELEM 0x01
#define DONELISTSIZE_16ELEM 0x02
#define DONELISTSIZE_32ELEM 0x03
#define DONELISTSIZE_64ELEM 0x04
#define DONELISTSIZE_128ELEM 0x05
#define DONELISTSIZE_256ELEM 0x06
#define DONELISTSIZE_512ELEM 0x07
#define DONELISTSIZE_1024ELEM 0x08
#define DONELISTSIZE_2048ELEM 0x09
#define DONELISTSIZE_4096ELEM 0x0A
#define DONELISTSIZE_8192ELEM 0x0B
#define DONELISTSIZE_16384ELEM 0x0C
/* mode 8 */
#define CSEQDLOFFS CSEQm_CIO_REG(8, 0x4E)
/* mode 11 */
#define CM11INTVEC0 CSEQm_CIO_REG(11, 0x50)
/* mode 11 */
#define CM11INTVEC1 CSEQm_CIO_REG(11, 0x52)
/* mode 11 */
#define CM11INTVEC2 CSEQm_CIO_REG(11, 0x54)
#define CCONMSK (CSEQ_CIO_REG_BASE_ADR + 0x60)
#define CCONEXIST (CSEQ_CIO_REG_BASE_ADR + 0x61)
#define CCONMODE (CSEQ_CIO_REG_BASE_ADR + 0x62)
#define CTIMERCALC (CSEQ_CIO_REG_BASE_ADR + 0x64)
#define CINTDIS (CSEQ_CIO_REG_BASE_ADR + 0x68)
/* mode 8, 32x32 bits, 128 bytes of mapped buffer */
#define CSBUFFER CSEQm_CIO_REG(8, 0x80)
#define CSCRATCH (CSEQ_CIO_REG_BASE_ADR + 0x1C0)
/* mode 0-8 */
#define CMnSCRATCH(Mode) CSEQm_CIO_REG(Mode, 0x1E0)
/*
* CSEQ Mapped Instruction RAM Page, Address Range : (0x0000-0x1FFC)
*/
#define CSEQ_RAM_REG_BASE_ADR 0xB8004000
/*
* The common definitions below have the same address offset for all the Link
* sequencers.
*/
#define MODECTL 0x40
#define DBGMODE 0x44
#define CONTROL 0x48
#define LEDTIMER 0x00010000
#define LEDTIMERS_10us 0x00000000
#define LEDTIMERS_1ms 0x00000800
#define LEDTIMERS_100ms 0x00001000
#define LEDMODE_TXRX 0x00000000
#define LEDMODE_CONNECTED 0x00000200
#define LEDPOL 0x00000100
#define LSEQRAM 0x1000
/*
* LmSEQ Host Registers, Address Range : (0x0000-0x3FFC)
*/
#define LSEQ0_HOST_REG_BASE_ADR 0xB8020000
#define LSEQ1_HOST_REG_BASE_ADR 0xB8024000
#define LSEQ2_HOST_REG_BASE_ADR 0xB8028000
#define LSEQ3_HOST_REG_BASE_ADR 0xB802C000
#define LSEQ4_HOST_REG_BASE_ADR 0xB8030000
#define LSEQ5_HOST_REG_BASE_ADR 0xB8034000
#define LSEQ6_HOST_REG_BASE_ADR 0xB8038000
#define LSEQ7_HOST_REG_BASE_ADR 0xB803C000
#define LmARP2CTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2CTL)
#define LmARP2INT(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2INT)
#define LmARP2INTEN(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2INTEN)
#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
DBGMODE)
#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
CONTROL)
#define LmARP2BREAKADR01(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2BREAKADR01)
#define LmARP2BREAKADR23(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2BREAKADR23)
#define LmMODECTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
MODECTL)
#define LmAUTODISCI 0x08000000
#define LmDSBLBITLT 0x04000000
#define LmDSBLANTT 0x02000000
#define LmDSBLCRTT 0x01000000
#define LmDSBLCONT 0x00000100
#define LmPRIMODE 0x00000080
#define LmDSBLHOLD 0x00000040
#define LmDISACK 0x00000020
#define LmBLIND48 0x00000010
#define LmRCVMODE_MASK 0x0000000C
#define LmRCVMODE_PLD 0x00000000
#define LmRCVMODE_HPC 0x00000004
#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
DBGMODE)
#define LmFRCPERR 0x80000000
#define LmMEMSEL_MASK 0x30000000
#define LmFRCRBPERR 0x00000000
#define LmFRCTBPERR 0x10000000
#define LmFRCSGBPERR 0x20000000
#define LmFRCARBPERR 0x30000000
#define LmRCVIDW 0x00080000
#define LmINVDWERR 0x00040000
#define LmRCVDISP 0x00004000
#define LmDISPERR 0x00002000
#define LmDSBLDSCR 0x00000800
#define LmDSBLSCR 0x00000400
#define LmFRCNAK 0x00000200
#define LmFRCROFS 0x00000100
#define LmFRCCRC 0x00000080
#define LmFRMTYPE_MASK 0x00000070
#define LmSG_DATA 0x00000000
#define LmSG_COMMAND 0x00000010
#define LmSG_TASK 0x00000020
#define LmSG_TGTXFER 0x00000030
#define LmSG_RESPONSE 0x00000040
#define LmSG_IDENADDR 0x00000050
#define LmSG_OPENADDR 0x00000060
#define LmDISCRCGEN 0x00000008
#define LmDISCRCCHK 0x00000004
#define LmSSXMTFRM 0x00000002
#define LmSSRCVFRM 0x00000001
#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
CONTROL)
#define LmSTEPXMTFRM 0x00000002
#define LmSTEPRCVFRM 0x00000001
#define LmBISTCTL0(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
BISTCTL0)
#define ARBBISTEN 0x40000000
#define ARBBISTDN 0x20000000 /* ro */
#define ARBBISTFAIL 0x10000000 /* ro */
#define TBBISTEN 0x00000400
#define TBBISTDN 0x00000200 /* ro */
#define TBBISTFAIL 0x00000100 /* ro */
#define RBBISTEN 0x00000040
#define RBBISTDN 0x00000020 /* ro */
#define RBBISTFAIL 0x00000010 /* ro */
#define SGBISTEN 0x00000004
#define SGBISTDN 0x00000002 /* ro */
#define SGBISTFAIL 0x00000001 /* ro */
#define LmBISTCTL1(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) +\
BISTCTL1)
#define LmRAMPAGE1 0x00000200
#define LmRAMPAGE0 0x00000100
#define LmIMEMBISTEN 0x00000040
#define LmIMEMBISTDN 0x00000020 /* ro */
#define LmIMEMBISTFAIL 0x00000010 /* ro */
#define LmSCRBISTEN 0x00000004
#define LmSCRBISTDN 0x00000002 /* ro */
#define LmSCRBISTFAIL 0x00000001 /* ro */
#define LmRAMPAGE (LmRAMPAGE1 + LmRAMPAGE0)
#define LmRAMPAGE_LSHIFT 0x8
#define LmSCRATCH(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
MAPPEDSCR)
#define LmSEQRAM(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
LSEQRAM)
/*
* LmSEQ CIO Bus Register, Address Range : (0x0000-0xFFC)
* 8 modes, each mode is 512 bytes.
* Unless specified, the register should valid for all modes.
*/
#define LmSEQ_CIOBUS_REG_BASE 0x2000
#define LmSEQ_PHY_BASE(Mode, LinkNum) \
(LSEQ0_HOST_REG_BASE_ADR + \
(LmSEQ_HOST_REG_SIZE * (u32) (LinkNum)) + \
LmSEQ_CIOBUS_REG_BASE + \
((u32) (Mode) * LmSEQ_MODE_PAGE_SIZE))
#define LmSEQ_PHY_REG(Mode, LinkNum, Reg) \
(LmSEQ_PHY_BASE(Mode, LinkNum) + (u32) (Reg))
#define LmMODEPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, MODEPTR)
#define LmALTMODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALTMODE)
#define LmATOMICXCHG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ATOMICXCHG)
#define LmFLAG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FLAG)
#define LmARP2INTCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2INTCTL)
#define LmSTACK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, STACK)
#define LmFUNCTION1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FUNCTION1)
#define LmPRGMCNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, PRGMCNT)
#define LmACCUM(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ACCUM)
#define LmSINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDEX)
#define LmDINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDEX)
#define LmALLONES(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLONES)
#define LmALLZEROS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLZEROS)
#define LmSINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDIR)
#define LmDINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDIR)
#define LmJUMLDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, JUMLDIR)
#define LmARP2HALTCODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2HALTCODE)
#define LmCURRADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, CURRADDR)
#define LmLASTADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, LASTADDR)
#define LmNXTLADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, NXTLADDR)
#define LmDBGPORTPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORTPTR)
#define LmDBGPORT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORT)
#define LmSCRATCHPAGE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SCRATCHPAGE)
#define LmMnSCRATCHPAGE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, \
MnSCRATCHPAGE)
#define LmTIMERCALC(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x28)
#define LmREQMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x30)
#define LmRSPMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x34)
#define LmMnINT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x38)
#define CTXMEMSIZE 0x80000000 /* ro */
#define LmACKREQ 0x08000000
#define LmNAKREQ 0x04000000
#define LmMnXMTERR 0x02000000
#define LmM5OOBSVC 0x01000000
#define LmHWTINT 0x00800000
#define LmMnCTXDONE 0x00100000
#define LmM2REQMBXF 0x00080000
#define LmM2RSPMBXE 0x00040000
#define LmMnDMAERR 0x00020000
#define LmRCVPRIM 0x00010000
#define LmRCVERR 0x00008000
#define LmADDRRCV 0x00004000
#define LmMnHDRMISS 0x00002000
#define LmMnWAITSCB 0x00001000
#define LmMnRLSSCB 0x00000800
#define LmMnSAVECTX 0x00000400
#define LmMnFETCHSG 0x00000200
#define LmMnLOADCTX 0x00000100
#define LmMnCFGICL 0x00000080
#define LmMnCFGSATA 0x00000040
#define LmMnCFGEXPSATA 0x00000020
#define LmMnCFGCMPLT 0x00000010
#define LmMnCFGRBUF 0x00000008
#define LmMnSAVETTR 0x00000004
#define LmMnCFGRDAT 0x00000002
#define LmMnCFGHDR 0x00000001
#define LmMnINTEN(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x3C)
#define EN_LmACKREQ 0x08000000
#define EN_LmNAKREQ 0x04000000
#define EN_LmMnXMTERR 0x02000000
#define EN_LmM5OOBSVC 0x01000000
#define EN_LmHWTINT 0x00800000
#define EN_LmMnCTXDONE 0x00100000
#define EN_LmM2REQMBXF 0x00080000
#define EN_LmM2RSPMBXE 0x00040000
#define EN_LmMnDMAERR 0x00020000
#define EN_LmRCVPRIM 0x00010000
#define EN_LmRCVERR 0x00008000
#define EN_LmADDRRCV 0x00004000
#define EN_LmMnHDRMISS 0x00002000
#define EN_LmMnWAITSCB 0x00001000
#define EN_LmMnRLSSCB 0x00000800
#define EN_LmMnSAVECTX 0x00000400
#define EN_LmMnFETCHSG 0x00000200
#define EN_LmMnLOADCTX 0x00000100
#define EN_LmMnCFGICL 0x00000080
#define EN_LmMnCFGSATA 0x00000040
#define EN_LmMnCFGEXPSATA 0x00000020
#define EN_LmMnCFGCMPLT 0x00000010
#define EN_LmMnCFGRBUF 0x00000008
#define EN_LmMnSAVETTR 0x00000004
#define EN_LmMnCFGRDAT 0x00000002
#define EN_LmMnCFGHDR 0x00000001
#define LmM0INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmMnCFGRBUF | \
EN_LmMnSAVETTR | EN_LmMnCFGRDAT | \
EN_LmMnCFGHDR | EN_LmRCVERR | \
EN_LmADDRRCV | EN_LmMnHDRMISS | \
EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
EN_LmHWTINT | EN_LmMnCTXDONE | \
EN_LmRCVPRIM | EN_LmMnCFGSATA | \
EN_LmMnCFGEXPSATA | EN_LmMnDMAERR)
#define LmM1INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmADDRRCV | \
EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
EN_LmMnXMTERR | EN_LmHWTINT | \
EN_LmMnCTXDONE | EN_LmRCVPRIM | \
EN_LmRCVERR | EN_LmMnDMAERR)
#define LmM2INTEN_MASK (EN_LmADDRRCV | EN_LmHWTINT | \
EN_LmM2REQMBXF | EN_LmRCVPRIM | \
EN_LmRCVERR)
#define LmM5INTEN_MASK (EN_LmADDRRCV | EN_LmM5OOBSVC | \
EN_LmHWTINT | EN_LmRCVPRIM | \
EN_LmRCVERR)
#define LmXMTPRIMD(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x40)
#define LmXMTPRIMCS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x44)
#define LmCONSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x45)
#define LmMnDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x46)
#define LmMnSGDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x47)
#define LmM0EXPHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x48)
#define LmM1SASALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x48)
#define SAS_ALIGN_DEFAULT 0xFF
#define LmM0MSKHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x49)
#define LmM1STPALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x49)
#define STP_ALIGN_DEFAULT 0x1F
#define LmM0RCVHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4A)
#define LmM1XMTHDRP(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4A)
#define LmM0ICLADR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4B)
#define LmM1ALIGNMODE(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4B)
#define LmDISALIGN 0x20
#define LmROTSTPALIGN 0x10
#define LmSTPALIGN 0x08
#define LmROTNOTIFY 0x04
#define LmDUALALIGN 0x02
#define LmROTALIGN 0x01
#define LmM0EXPRCVNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4C)
#define LmM1XMTCNT(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4C)
#define LmMnBUFSTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x4E)
#define LmMnBUFPERR 0x01
/* mode 0-1 */
#define LmMnXFRLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x59)
#define LmMnXFRLVL_128 0x05
#define LmMnXFRLVL_256 0x04
#define LmMnXFRLVL_512 0x03
#define LmMnXFRLVL_1024 0x02
#define LmMnXFRLVL_1536 0x01
#define LmMnXFRLVL_2048 0x00
/* mode 0-1 */
#define LmMnSGDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5A)
#define LmMnRESETSG 0x04
#define LmMnSTOPSG 0x02
#define LmMnSTARTSG 0x01
/* mode 0-1 */
#define LmMnSGDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5B)
/* mode 0-1 */
#define LmMnDDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5C)
#define LmMnFLUSH 0x40 /* wo */
#define LmMnRLSRTRY 0x20 /* wo */
#define LmMnDISCARD 0x10 /* wo */
#define LmMnRESETDAT 0x08 /* wo */
#define LmMnSUSDAT 0x04 /* wo */
#define LmMnSTOPDAT 0x02 /* wo */
#define LmMnSTARTDAT 0x01 /* wo */
/* mode 0-1 */
#define LmMnDDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5D)
#define LmMnDPEMPTY 0x80
#define LmMnFLUSHING 0x40
#define LmMnDDMAREQ 0x20
#define LmMnHDMAREQ 0x10
#define LmMnDATFREE 0x08
#define LmMnDATSUS 0x04
#define LmMnDATACT 0x02
#define LmMnDATEN 0x01
/* mode 0-1 */
#define LmMnDDMAMODE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5E)
#define LmMnDMATYPE_NORMAL 0x0000
#define LmMnDMATYPE_HOST_ONLY_TX 0x0001
#define LmMnDMATYPE_DEVICE_ONLY_TX 0x0002
#define LmMnDMATYPE_INVALID 0x0003
#define LmMnDMATYPE_MASK 0x0003
#define LmMnDMAWRAP 0x0004
#define LmMnBITBUCKET 0x0008
#define LmMnDISHDR 0x0010
#define LmMnSTPCRC 0x0020
#define LmXTEST 0x0040
#define LmMnDISCRC 0x0080
#define LmMnENINTLK 0x0100
#define LmMnADDRFRM 0x0400
#define LmMnENXMTCRC 0x0800
/* mode 0-1 */
#define LmMnXFRCNT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x70)
/* mode 0-1 */
#define LmMnDPSEL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7B)
#define LmMnDPSEL_MASK 0x07
#define LmMnEOLPRE 0x40
#define LmMnEOSPRE 0x80
/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
/* Receive Mode n = 0 */
#define LmMnHRADDR 0x00
#define LmMnHBYTECNT 0x01
#define LmMnHREWIND 0x02
#define LmMnDWADDR 0x03
#define LmMnDSPACECNT 0x04
#define LmMnDFRMSIZE 0x05
/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
/* Transmit Mode n = 1 */
#define LmMnHWADDR 0x00
#define LmMnHSPACECNT 0x01
/* #define LmMnHREWIND 0x02 */
#define LmMnDRADDR 0x03
#define LmMnDBYTECNT 0x04
/* #define LmMnDFRMSIZE 0x05 */
/* mode 0-1 */
#define LmMnDPACC(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x78)
#define LmMnDPACC_MASK 0x00FFFFFF
/* mode 0-1 */
#define LmMnHOLDLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7D)
#define LmPRMSTAT0(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x80)
#define LmPRMSTAT0BYTE0 0x80
#define LmPRMSTAT0BYTE1 0x81
#define LmPRMSTAT0BYTE2 0x82
#define LmPRMSTAT0BYTE3 0x83
#define LmFRAMERCVD 0x80000000
#define LmXFRRDYRCVD 0x40000000
#define LmUNKNOWNP 0x20000000
#define LmBREAK 0x10000000
#define LmDONE 0x08000000
#define LmOPENACPT 0x04000000
#define LmOPENRJCT 0x02000000
#define LmOPENRTRY 0x01000000
#define LmCLOSERV1 0x00800000
#define LmCLOSERV0 0x00400000
#define LmCLOSENORM 0x00200000
#define LmCLOSECLAF 0x00100000
#define LmNOTIFYRV2 0x00080000
#define LmNOTIFYRV1 0x00040000
#define LmNOTIFYRV0 0x00020000
#define LmNOTIFYSPIN 0x00010000
#define LmBROADRV4 0x00008000
#define LmBROADRV3 0x00004000
#define LmBROADRV2 0x00002000
#define LmBROADRV1 0x00001000
#define LmBROADSES 0x00000800
#define LmBROADRVCH1 0x00000400
#define LmBROADRVCH0 0x00000200
#define LmBROADCH 0x00000100
#define LmAIPRVWP 0x00000080
#define LmAIPWP 0x00000040
#define LmAIPWD 0x00000020
#define LmAIPWC 0x00000010
#define LmAIPRV2 0x00000008
#define LmAIPRV1 0x00000004
#define LmAIPRV0 0x00000002
#define LmAIPNRML 0x00000001
#define LmBROADCAST_MASK (LmBROADCH | LmBROADRVCH0 | \
LmBROADRVCH1)
#define LmPRMSTAT1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x84)
#define LmPRMSTAT1BYTE0 0x84
#define LmPRMSTAT1BYTE1 0x85
#define LmPRMSTAT1BYTE2 0x86
#define LmPRMSTAT1BYTE3 0x87
#define LmFRMRCVDSTAT 0x80000000
#define LmBREAK_DET 0x04000000
#define LmCLOSE_DET 0x02000000
#define LmDONE_DET 0x01000000
#define LmXRDY 0x00040000
#define LmSYNCSRST 0x00020000
#define LmSYNC 0x00010000
#define LmXHOLD 0x00008000
#define LmRRDY 0x00004000
#define LmHOLD 0x00002000
#define LmROK 0x00001000
#define LmRIP 0x00000800
#define LmCRBLK 0x00000400
#define LmACK 0x00000200
#define LmNAK 0x00000100
#define LmHARDRST 0x00000080
#define LmERROR 0x00000040
#define LmRERR 0x00000020
#define LmPMREQP 0x00000010
#define LmPMREQS 0x00000008
#define LmPMACK 0x00000004
#define LmPMNAK 0x00000002
#define LmDMAT 0x00000001
/* mode 1 */
#define LmMnSATAFS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7E)
#define LmMnXMTSIZE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x93)
/* mode 0 */
#define LmMnFRMERR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xB0)
#define LmACRCERR 0x00000800
#define LmPHYOVRN 0x00000400
#define LmOBOVRN 0x00000200
#define LmMnZERODATA 0x00000100
#define LmSATAINTLK 0x00000080
#define LmMnCRCERR 0x00000020
#define LmRRDYOVRN 0x00000010
#define LmMISSSOAF 0x00000008
#define LmMISSSOF 0x00000004
#define LmMISSEOAF 0x00000002
#define LmMISSEOF 0x00000001
#define LmFRMERREN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xB4)
#define EN_LmACRCERR 0x00000800
#define EN_LmPHYOVRN 0x00000400
#define EN_LmOBOVRN 0x00000200
#define EN_LmMnZERODATA 0x00000100
#define EN_LmSATAINTLK 0x00000080
#define EN_LmFRMBAD 0x00000040
#define EN_LmMnCRCERR 0x00000020
#define EN_LmRRDYOVRN 0x00000010
#define EN_LmMISSSOAF 0x00000008
#define EN_LmMISSSOF 0x00000004
#define EN_LmMISSEOAF 0x00000002
#define EN_LmMISSEOF 0x00000001
#define LmFRMERREN_MASK (EN_LmSATAINTLK | EN_LmMnCRCERR | \
EN_LmRRDYOVRN | EN_LmMISSSOF | \
EN_LmMISSEOAF | EN_LmMISSEOF | \
EN_LmACRCERR | LmPHYOVRN | \
EN_LmOBOVRN | EN_LmMnZERODATA)
#define LmHWTSTATEN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC5)
#define EN_LmDONETO 0x80
#define EN_LmINVDISP 0x40
#define EN_LmINVDW 0x20
#define EN_LmDWSEVENT 0x08
#define EN_LmCRTTTO 0x04
#define EN_LmANTTTO 0x02
#define EN_LmBITLTTO 0x01
#define LmHWTSTATEN_MASK (EN_LmINVDISP | EN_LmINVDW | \
EN_LmDWSEVENT | EN_LmCRTTTO | \
EN_LmANTTTO | EN_LmDONETO | \
EN_LmBITLTTO)
#define LmHWTSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC7)
#define LmDONETO 0x80
#define LmINVDISP 0x40
#define LmINVDW 0x20
#define LmDWSEVENT 0x08
#define LmCRTTTO 0x04
#define LmANTTTO 0x02
#define LmBITLTTO 0x01
#define LmMnDATABUFADR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xC8)
#define LmDATABUFADR_MASK 0x0FFF
#define LmMnDATABUF(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xCA)
#define LmPRIMSTAT0EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE0)
#define EN_LmUNKNOWNP 0x20000000
#define EN_LmBREAK 0x10000000
#define EN_LmDONE 0x08000000
#define EN_LmOPENACPT 0x04000000
#define EN_LmOPENRJCT 0x02000000
#define EN_LmOPENRTRY 0x01000000
#define EN_LmCLOSERV1 0x00800000
#define EN_LmCLOSERV0 0x00400000
#define EN_LmCLOSENORM 0x00200000
#define EN_LmCLOSECLAF 0x00100000
#define EN_LmNOTIFYRV2 0x00080000
#define EN_LmNOTIFYRV1 0x00040000
#define EN_LmNOTIFYRV0 0x00020000
#define EN_LmNOTIFYSPIN 0x00010000
#define EN_LmBROADRV4 0x00008000
#define EN_LmBROADRV3 0x00004000
#define EN_LmBROADRV2 0x00002000
#define EN_LmBROADRV1 0x00001000
#define EN_LmBROADRV0 0x00000800
#define EN_LmBROADRVCH1 0x00000400
#define EN_LmBROADRVCH0 0x00000200
#define EN_LmBROADCH 0x00000100
#define EN_LmAIPRVWP 0x00000080
#define EN_LmAIPWP 0x00000040
#define EN_LmAIPWD 0x00000020
#define EN_LmAIPWC 0x00000010
#define EN_LmAIPRV2 0x00000008
#define EN_LmAIPRV1 0x00000004
#define EN_LmAIPRV0 0x00000002
#define EN_LmAIPNRML 0x00000001
#define LmPRIMSTAT0EN_MASK (EN_LmBREAK | \
EN_LmDONE | EN_LmOPENACPT | \
EN_LmOPENRJCT | EN_LmOPENRTRY | \
EN_LmCLOSERV1 | EN_LmCLOSERV0 | \
EN_LmCLOSENORM | EN_LmCLOSECLAF | \
EN_LmBROADRV4 | EN_LmBROADRV3 | \
EN_LmBROADRV2 | EN_LmBROADRV1 | \
EN_LmBROADRV0 | EN_LmBROADRVCH1 | \
EN_LmBROADRVCH0 | EN_LmBROADCH | \
EN_LmAIPRVWP | EN_LmAIPWP | \
EN_LmAIPWD | EN_LmAIPWC | \
EN_LmAIPRV2 | EN_LmAIPRV1 | \
EN_LmAIPRV0 | EN_LmAIPNRML)
#define LmPRIMSTAT1EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE4)
#define EN_LmXRDY 0x00040000
#define EN_LmSYNCSRST 0x00020000
#define EN_LmSYNC 0x00010000
#define EN_LmXHOLD 0x00008000
#define EN_LmRRDY 0x00004000
#define EN_LmHOLD 0x00002000
#define EN_LmROK 0x00001000
#define EN_LmRIP 0x00000800
#define EN_LmCRBLK 0x00000400
#define EN_LmACK 0x00000200
#define EN_LmNAK 0x00000100
#define EN_LmHARDRST 0x00000080
#define EN_LmERROR 0x00000040
#define EN_LmRERR 0x00000020
#define EN_LmPMREQP 0x00000010
#define EN_LmPMREQS 0x00000008
#define EN_LmPMACK 0x00000004
#define EN_LmPMNAK 0x00000002
#define EN_LmDMAT 0x00000001
#define LmPRIMSTAT1EN_MASK (EN_LmHARDRST | \
EN_LmSYNCSRST | \
EN_LmPMREQP | EN_LmPMREQS | \
EN_LmPMACK | EN_LmPMNAK)
#define LmSMSTATE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE8)
#define LmSMSTATEBRK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xEC)
#define LmSMDBGCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xF0)
/*
* LmSEQ CIO Bus Mode 3 Register.
* Mode 3: Configuration and Setup, IOP Context SCB.
*/
#define LmM3SATATIMER(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x48)
#define LmM3INTVEC0(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x90)
#define LmM3INTVEC1(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x92)
#define LmM3INTVEC2(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x94)
#define LmM3INTVEC3(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x96)
#define LmM3INTVEC4(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x98)
#define LmM3INTVEC5(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9A)
#define LmM3INTVEC6(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9C)
#define LmM3INTVEC7(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9E)
#define LmM3INTVEC8(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA4)
#define LmM3INTVEC9(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA6)
#define LmM3INTVEC10(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB0)
#define LmM3FRMGAP(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB4)
#define LmBITL_TIMER(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA2)
#define LmWWN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA8)
/*
* LmSEQ CIO Bus Mode 5 Registers.
* Mode 5: Phy/OOB Control and Status.
*/
#define LmSEQ_OOB_REG(phy_id, reg) LmSEQ_PHY_REG(5, (phy_id), (reg))
#define OOB_BFLTR 0x100
#define BFLTR_THR_MASK 0xF0
#define BFLTR_TC_MASK 0x0F
#define OOB_INIT_MIN 0x102
#define OOB_INIT_MAX 0x104
#define OOB_INIT_NEG 0x106
#define OOB_SAS_MIN 0x108
#define OOB_SAS_MAX 0x10A
#define OOB_SAS_NEG 0x10C
#define OOB_WAKE_MIN 0x10E
#define OOB_WAKE_MAX 0x110
#define OOB_WAKE_NEG 0x112
#define OOB_IDLE_MAX 0x114
#define OOB_BURST_MAX 0x116
#define OOB_DATA_KBITS 0x126
#define OOB_ALIGN_0_DATA 0x12C
#define OOB_ALIGN_1_DATA 0x130
#define D10_2_DATA_k 0x00
#define SYNC_DATA_k 0x02
#define ALIGN_1_DATA_k 0x04
#define ALIGN_0_DATA_k 0x08
#define BURST_DATA_k 0x10
#define OOB_PHY_RESET_COUNT 0x13C
#define OOB_SIG_GEN 0x140
#define START_OOB 0x80
#define START_DWS 0x40
#define ALIGN_CNT3 0x30
#define ALIGN_CNT2 0x20
#define ALIGN_CNT1 0x10
#define ALIGN_CNT4 0x00
#define STOP_DWS 0x08
#define SEND_COMSAS 0x04
#define SEND_COMINIT 0x02
#define SEND_COMWAKE 0x01
#define OOB_XMIT 0x141
#define TX_ENABLE 0x80
#define XMIT_OOB_BURST 0x10
#define XMIT_D10_2 0x08
#define XMIT_SYNC 0x04
#define XMIT_ALIGN_1 0x02
#define XMIT_ALIGN_0 0x01
#define FUNCTION_MASK 0x142
#define SAS_MODE_DIS 0x80
#define SATA_MODE_DIS 0x40
#define SPINUP_HOLD_DIS 0x20
#define HOT_PLUG_DIS 0x10
#define SATA_PS_DIS 0x08
#define FUNCTION_MASK_DEFAULT (SPINUP_HOLD_DIS | SATA_PS_DIS)
#define OOB_MODE 0x143
#define SAS_MODE 0x80
#define SATA_MODE 0x40
#define SLOW_CLK 0x20
#define FORCE_XMIT_15 0x08
#define PHY_SPEED_60 0x04
#define PHY_SPEED_30 0x02
#define PHY_SPEED_15 0x01
#define CURRENT_STATUS 0x144
#define CURRENT_OOB_DONE 0x80
#define CURRENT_LOSS_OF_SIGNAL 0x40
#define CURRENT_SPINUP_HOLD 0x20
#define CURRENT_HOT_PLUG_CNCT 0x10
#define CURRENT_GTO_TIMEOUT 0x08
#define CURRENT_OOB_TIMEOUT 0x04
#define CURRENT_DEVICE_PRESENT 0x02
#define CURRENT_OOB_ERROR 0x01
#define CURRENT_OOB1_ERROR (CURRENT_HOT_PLUG_CNCT | \
CURRENT_GTO_TIMEOUT)
#define CURRENT_OOB2_ERROR (CURRENT_HOT_PLUG_CNCT | \
CURRENT_OOB_ERROR)
#define DEVICE_ADDED_W_CNT (CURRENT_OOB_DONE | \
CURRENT_HOT_PLUG_CNCT | \
CURRENT_DEVICE_PRESENT)
#define DEVICE_ADDED_WO_CNT (CURRENT_OOB_DONE | \
CURRENT_DEVICE_PRESENT)
#define DEVICE_REMOVED CURRENT_LOSS_OF_SIGNAL
#define CURRENT_PHY_MASK (CURRENT_OOB_DONE | \
CURRENT_LOSS_OF_SIGNAL | \
CURRENT_SPINUP_HOLD | \
CURRENT_HOT_PLUG_CNCT | \
CURRENT_GTO_TIMEOUT | \
CURRENT_DEVICE_PRESENT | \
CURRENT_OOB_ERROR )
#define CURRENT_ERR_MASK (CURRENT_LOSS_OF_SIGNAL | \
CURRENT_GTO_TIMEOUT | \
CURRENT_OOB_TIMEOUT | \
CURRENT_OOB_ERROR )
#define SPEED_MASK 0x145
#define SATA_SPEED_30_DIS 0x10
#define SATA_SPEED_15_DIS 0x08
#define SAS_SPEED_60_DIS 0x04
#define SAS_SPEED_30_DIS 0x02
#define SAS_SPEED_15_DIS 0x01
#define SAS_SPEED_MASK_DEFAULT 0x00
#define OOB_TIMER_ENABLE 0x14D
#define HOT_PLUG_EN 0x80
#define RCD_EN 0x40
#define COMTIMER_EN 0x20
#define SNTT_EN 0x10
#define SNLT_EN 0x04
#define SNWT_EN 0x02
#define ALIGN_EN 0x01
#define OOB_STATUS 0x14E
#define OOB_DONE 0x80
#define LOSS_OF_SIGNAL 0x40 /* ro */
#define SPINUP_HOLD 0x20
#define HOT_PLUG_CNCT 0x10 /* ro */
#define GTO_TIMEOUT 0x08 /* ro */
#define OOB_TIMEOUT 0x04 /* ro */
#define DEVICE_PRESENT 0x02 /* ro */
#define OOB_ERROR 0x01 /* ro */
#define OOB_STATUS_ERROR_MASK (LOSS_OF_SIGNAL | GTO_TIMEOUT | \
OOB_TIMEOUT | OOB_ERROR)
#define OOB_STATUS_CLEAR 0x14F
#define OOB_DONE_CLR 0x80
#define LOSS_OF_SIGNAL_CLR 0x40
#define SPINUP_HOLD_CLR 0x20
#define HOT_PLUG_CNCT_CLR 0x10
#define GTO_TIMEOUT_CLR 0x08
#define OOB_TIMEOUT_CLR 0x04
#define OOB_ERROR_CLR 0x01
#define HOT_PLUG_DELAY 0x150
/* In 5 ms units. 20 = 100 ms. */
#define HOTPLUG_DELAY_TIMEOUT 20
#define INT_ENABLE_2 0x15A
#define OOB_DONE_EN 0x80
#define LOSS_OF_SIGNAL_EN 0x40
#define SPINUP_HOLD_EN 0x20
#define HOT_PLUG_CNCT_EN 0x10
#define GTO_TIMEOUT_EN 0x08
#define OOB_TIMEOUT_EN 0x04
#define DEVICE_PRESENT_EN 0x02
#define OOB_ERROR_EN 0x01
#define PHY_CONTROL_0 0x160
#define PHY_LOWPWREN_TX 0x80
#define PHY_LOWPWREN_RX 0x40
#define SPARE_REG_160_B5 0x20
#define OFFSET_CANCEL_RX 0x10
/* bits 3:2 */
#define PHY_RXCOMCENTER_60V 0x00
#define PHY_RXCOMCENTER_70V 0x04
#define PHY_RXCOMCENTER_80V 0x08
#define PHY_RXCOMCENTER_90V 0x0C
#define PHY_RXCOMCENTER_MASK 0x0C
#define PHY_RESET 0x02
#define SAS_DEFAULT_SEL 0x01
#define PHY_CONTROL_1 0x161
/* bits 2:0 */
#define SATA_PHY_DETLEVEL_50mv 0x00
#define SATA_PHY_DETLEVEL_75mv 0x01
#define SATA_PHY_DETLEVEL_100mv 0x02
#define SATA_PHY_DETLEVEL_125mv 0x03
#define SATA_PHY_DETLEVEL_150mv 0x04
#define SATA_PHY_DETLEVEL_175mv 0x05
#define SATA_PHY_DETLEVEL_200mv 0x06
#define SATA_PHY_DETLEVEL_225mv 0x07
#define SATA_PHY_DETLEVEL_MASK 0x07
/* bits 5:3 */
#define SAS_PHY_DETLEVEL_50mv 0x00
#define SAS_PHY_DETLEVEL_75mv 0x08
#define SAS_PHY_DETLEVEL_100mv 0x10
#define SAS_PHY_DETLEVEL_125mv 0x11
#define SAS_PHY_DETLEVEL_150mv 0x20
#define SAS_PHY_DETLEVEL_175mv 0x21
#define SAS_PHY_DETLEVEL_200mv 0x30
#define SAS_PHY_DETLEVEL_225mv 0x31
#define SAS_PHY_DETLEVEL_MASK 0x38
#define PHY_CONTROL_2 0x162
/* bits 7:5 */
#define SATA_PHY_DRV_400mv 0x00
#define SATA_PHY_DRV_450mv 0x20
#define SATA_PHY_DRV_500mv 0x40
#define SATA_PHY_DRV_550mv 0x60
#define SATA_PHY_DRV_600mv 0x80
#define SATA_PHY_DRV_650mv 0xA0
#define SATA_PHY_DRV_725mv 0xC0
#define SATA_PHY_DRV_800mv 0xE0
#define SATA_PHY_DRV_MASK 0xE0
/* bits 4:3 */
#define SATA_PREEMP_0 0x00
#define SATA_PREEMP_1 0x08
#define SATA_PREEMP_2 0x10
#define SATA_PREEMP_3 0x18
#define SATA_PREEMP_MASK 0x18
#define SATA_CMSH1P5 0x04
/* bits 1:0 */
#define SATA_SLEW_0 0x00
#define SATA_SLEW_1 0x01
#define SATA_SLEW_2 0x02
#define SATA_SLEW_3 0x03
#define SATA_SLEW_MASK 0x03
#define PHY_CONTROL_3 0x163
/* bits 7:5 */
#define SAS_PHY_DRV_400mv 0x00
#define SAS_PHY_DRV_450mv 0x20
#define SAS_PHY_DRV_500mv 0x40
#define SAS_PHY_DRV_550mv 0x60
#define SAS_PHY_DRV_600mv 0x80
#define SAS_PHY_DRV_650mv 0xA0
#define SAS_PHY_DRV_725mv 0xC0
#define SAS_PHY_DRV_800mv 0xE0
#define SAS_PHY_DRV_MASK 0xE0
/* bits 4:3 */
#define SAS_PREEMP_0 0x00
#define SAS_PREEMP_1 0x08
#define SAS_PREEMP_2 0x10
#define SAS_PREEMP_3 0x18
#define SAS_PREEMP_MASK 0x18
#define SAS_CMSH1P5 0x04
/* bits 1:0 */
#define SAS_SLEW_0 0x00
#define SAS_SLEW_1 0x01
#define SAS_SLEW_2 0x02
#define SAS_SLEW_3 0x03
#define SAS_SLEW_MASK 0x03
#define PHY_CONTROL_4 0x168
#define PHY_DONE_CAL_TX 0x80
#define PHY_DONE_CAL_RX 0x40
#define RX_TERM_LOAD_DIS 0x20
#define TX_TERM_LOAD_DIS 0x10
#define AUTO_TERM_CAL_DIS 0x08
#define PHY_SIGDET_FLTR_EN 0x04
#define OSC_FREQ 0x02
#define PHY_START_CAL 0x01
/*
* HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
*/
#define PCIX_REG_BASE_ADR 0xB8040000
#define PCIC_VENDOR_ID 0x00
#define PCIC_DEVICE_ID 0x02
#define PCIC_COMMAND 0x04
#define INT_DIS 0x0400
#define FBB_EN 0x0200 /* ro */
#define SERR_EN 0x0100
#define STEP_EN 0x0080 /* ro */
#define PERR_EN 0x0040
#define VGA_EN 0x0020 /* ro */
#define MWI_EN 0x0010
#define SPC_EN 0x0008
#define MST_EN 0x0004
#define MEM_EN 0x0002
#define IO_EN 0x0001
#define PCIC_STATUS 0x06
#define PERR_DET 0x8000
#define SERR_GEN 0x4000
#define MABT_DET 0x2000
#define TABT_DET 0x1000
#define TABT_GEN 0x0800
#define DPERR_DET 0x0100
#define CAP_LIST 0x0010
#define INT_STAT 0x0008
#define PCIC_DEVREV_ID 0x08
#define PCIC_CLASS_CODE 0x09
#define PCIC_CACHELINE_SIZE 0x0C
#define PCIC_MBAR0 0x10
#define PCIC_MBAR0_OFFSET 0
#define PCIC_MBAR1 0x18
#define PCIC_MBAR1_OFFSET 2
#define PCIC_IOBAR 0x20
#define PCIC_IOBAR_OFFSET 4
#define PCIC_SUBVENDOR_ID 0x2C
#define PCIC_SUBSYTEM_ID 0x2E
#define PCIX_STATUS 0x44
#define RCV_SCE 0x20000000
#define UNEXP_SC 0x00080000
#define SC_DISCARD 0x00040000
#define ECC_CTRL_STAT 0x48
#define UNCOR_ECCERR 0x00000008
#define PCIC_PM_CSR 0x5C
#define PWR_STATE_D0 0
#define PWR_STATE_D1 1 /* not supported */
#define PWR_STATE_D2 2 /* not supported */
#define PWR_STATE_D3 3
#define PCIC_BASE1 0x6C /* internal use only */
#define BASE1_RSVD 0xFFFFFFF8
#define PCIC_BASEA 0x70 /* internal use only */
#define BASEA_RSVD 0xFFFFFFC0
#define BASEA_START 0
#define PCIC_BASEB 0x74 /* internal use only */
#define BASEB_RSVD 0xFFFFFF80
#define BASEB_IOMAP_MASK 0x7F
#define BASEB_START 0x80
#define PCIC_BASEC 0x78 /* internal use only */
#define BASEC_RSVD 0xFFFFFFFC
#define BASEC_MASK 0x03
#define BASEC_START 0x58
#define PCIC_MBAR_KEY 0x7C /* internal use only */
#define MBAR_KEY_MASK 0xFFFFFFFF
#define PCIC_HSTPCIX_CNTRL 0xA0
#define REWIND_DIS 0x0800
#define SC_TMR_DIS 0x04000000
#define PCIC_MBAR0_MASK 0xA8
#define PCIC_MBAR0_SIZE_MASK 0x1FFFE000
#define PCIC_MBAR0_SIZE_SHIFT 13
#define PCIC_MBAR0_SIZE(val) \
(((val) & PCIC_MBAR0_SIZE_MASK) >> PCIC_MBAR0_SIZE_SHIFT)
#define PCIC_FLASH_MBAR 0xB8
#define PCIC_INTRPT_STAT 0xD4
#define PCIC_TP_CTRL 0xFC
/*
* EXSI Registers, Addresss Range: (0x00-0xFC)
*/
#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI
#define EXSICNFGR (EXSI_REG_BASE_ADR + 0x00)
#define OCMINITIALIZED 0x80000000
#define ASIEN 0x00400000
#define HCMODE 0x00200000
#define PCIDEF 0x00100000
#define COMSTOCK 0x00080000
#define SEEPROMEND 0x00040000
#define MSTTIMEN 0x00020000
#define XREGEX 0x00000200
#define NVRAMW 0x00000100
#define NVRAMEX 0x00000080
#define SRAMW 0x00000040
#define SRAMEX 0x00000020
#define FLASHW 0x00000010
#define FLASHEX 0x00000008
#define SEEPROMCFG 0x00000004
#define SEEPROMTYP 0x00000002
#define SEEPROMEX 0x00000001
#define EXSICNTRLR (EXSI_REG_BASE_ADR + 0x04)
#define MODINT_EN 0x00000001
#define PMSTATR (EXSI_REG_BASE_ADR + 0x10)
#define FLASHRST 0x00000002
#define FLASHRDY 0x00000001
#define FLCNFGR (EXSI_REG_BASE_ADR + 0x14)
#define FLWEH_MASK 0x30000000
#define FLWESU_MASK 0x0C000000
#define FLWEPW_MASK 0x03F00000
#define FLOEH_MASK 0x000C0000
#define FLOESU_MASK 0x00030000
#define FLOEPW_MASK 0x0000FC00
#define FLCSH_MASK 0x00000300
#define FLCSSU_MASK 0x000000C0
#define FLCSPW_MASK 0x0000003F
#define SRCNFGR (EXSI_REG_BASE_ADR + 0x18)
#define SRWEH_MASK 0x30000000
#define SRWESU_MASK 0x0C000000
#define SRWEPW_MASK 0x03F00000
#define SROEH_MASK 0x000C0000
#define SROESU_MASK 0x00030000
#define SROEPW_MASK 0x0000FC00
#define SRCSH_MASK 0x00000300
#define SRCSSU_MASK 0x000000C0
#define SRCSPW_MASK 0x0000003F
#define NVCNFGR (EXSI_REG_BASE_ADR + 0x1C)
#define NVWEH_MASK 0x30000000
#define NVWESU_MASK 0x0C000000
#define NVWEPW_MASK 0x03F00000
#define NVOEH_MASK 0x000C0000
#define NVOESU_MASK 0x00030000
#define NVOEPW_MASK 0x0000FC00
#define NVCSH_MASK 0x00000300
#define NVCSSU_MASK 0x000000C0
#define NVCSPW_MASK 0x0000003F
#define XRCNFGR (EXSI_REG_BASE_ADR + 0x20)
#define XRWEH_MASK 0x30000000
#define XRWESU_MASK 0x0C000000
#define XRWEPW_MASK 0x03F00000
#define XROEH_MASK 0x000C0000
#define XROESU_MASK 0x00030000
#define XROEPW_MASK 0x0000FC00
#define XRCSH_MASK 0x00000300
#define XRCSSU_MASK 0x000000C0
#define XRCSPW_MASK 0x0000003F
#define XREGADDR (EXSI_REG_BASE_ADR + 0x24)
#define XRADDRINCEN 0x80000000
#define XREGADD_MASK 0x007FFFFF
#define XREGDATAR (EXSI_REG_BASE_ADR + 0x28)
#define XREGDATA_MASK 0x0000FFFF
#define GPIOOER (EXSI_REG_BASE_ADR + 0x40)
#define GPIOODENR (EXSI_REG_BASE_ADR + 0x44)
#define GPIOINVR (EXSI_REG_BASE_ADR + 0x48)
#define GPIODATAOR (EXSI_REG_BASE_ADR + 0x4C)
#define GPIODATAIR (EXSI_REG_BASE_ADR + 0x50)
#define GPIOCNFGR (EXSI_REG_BASE_ADR + 0x54)
#define GPIO_EXTSRC 0x00000001
#define SCNTRLR (EXSI_REG_BASE_ADR + 0xA0)
#define SXFERDONE 0x00000100
#define SXFERCNT_MASK 0x000000E0
#define SCMDTYP_MASK 0x0000001C
#define SXFERSTART 0x00000002
#define SXFEREN 0x00000001
#define SRATER (EXSI_REG_BASE_ADR + 0xA4)
#define SADDRR (EXSI_REG_BASE_ADR + 0xA8)
#define SADDR_MASK 0x0000FFFF
#define SDATAOR (EXSI_REG_BASE_ADR + 0xAC)
#define SDATAOR0 (EXSI_REG_BASE_ADR + 0xAC)
#define SDATAOR1 (EXSI_REG_BASE_ADR + 0xAD)
#define SDATAOR2 (EXSI_REG_BASE_ADR + 0xAE)
#define SDATAOR3 (EXSI_REG_BASE_ADR + 0xAF)
#define SDATAIR (EXSI_REG_BASE_ADR + 0xB0)
#define SDATAIR0 (EXSI_REG_BASE_ADR + 0xB0)
#define SDATAIR1 (EXSI_REG_BASE_ADR + 0xB1)
#define SDATAIR2 (EXSI_REG_BASE_ADR + 0xB2)
#define SDATAIR3 (EXSI_REG_BASE_ADR + 0xB3)
#define ASISTAT0R (EXSI_REG_BASE_ADR + 0xD0)
#define ASIFMTERR 0x00000400
#define ASISEECHKERR 0x00000200
#define ASIERR 0x00000100
#define ASISTAT1R (EXSI_REG_BASE_ADR + 0xD4)
#define CHECKSUM_MASK 0x0000FFFF
#define ASIERRADDR (EXSI_REG_BASE_ADR + 0xD8)
#define ASIERRDATAR (EXSI_REG_BASE_ADR + 0xDC)
#define ASIERRSTATR (EXSI_REG_BASE_ADR + 0xE0)
#define CPI2ASIBYTECNT_MASK 0x00070000
#define CPI2ASIBYTEEN_MASK 0x0000F000
#define CPI2ASITARGERR_MASK 0x00000F00
#define CPI2ASITARGMID_MASK 0x000000F0
#define CPI2ASIMSTERR_MASK 0x0000000F
/*
* XSRAM, External SRAM (DWord and any BE pattern accessible)
*/
#define XSRAM_REG_BASE_ADDR 0xB8100000
#define XSRAM_SIZE 0x100000
/*
* NVRAM Registers, Address Range: (0x00000 - 0x3FFFF).
*/
#define NVRAM_REG_BASE_ADR 0xBF800000
#define NVRAM_MAX_BASE_ADR 0x003FFFFF
/* OCM base address */
#define OCM_BASE_ADDR 0xA0000000
#define OCM_MAX_SIZE 0x20000
/*
* Sequencers (Central and Link) Scratch RAM page definitions.
*/
/*
* The Central Management Sequencer (CSEQ) Scratch Memory is a 1024
* byte memory. It is dword accessible and has byte parity
* protection. The CSEQ accesses it in 32 byte windows, either as mode
* dependent or mode independent memory. Each mode has 96 bytes,
* (three 32 byte pages 0-2, not contiguous), leaving 128 bytes of
* Mode Independent memory (four 32 byte pages 3-7). Note that mode
* dependent scratch memory, Mode 8, page 0-3 overlaps mode
* independent scratch memory, pages 0-3.
* - 896 bytes of mode dependent scratch, 96 bytes per Modes 0-7, and
* 128 bytes in mode 8,
* - 259 bytes of mode independent scratch, common to modes 0-15.
*
* Sequencer scratch RAM is 1024 bytes. This scratch memory is
* divided into mode dependent and mode independent scratch with this
* memory further subdivided into pages of size 32 bytes. There are 5
* pages (160 bytes) of mode independent scratch and 3 pages of
* dependent scratch memory for modes 0-7 (768 bytes). Mode 8 pages
* 0-2 dependent scratch overlap with pages 0-2 of mode independent
* scratch memory.
*
* The host accesses this scratch in a different manner from the
* central sequencer. The sequencer has to use CSEQ registers CSCRPAGE
* and CMnSCRPAGE to access the scratch memory. A flat mapping of the
* scratch memory is available for software convenience and to prevent
* corruption while the sequencer is running. This memory is mapped
* onto addresses 800h - BFFh, total of 400h bytes.
*
* These addresses are mapped as follows:
*
* 800h-83Fh Mode Dependent Scratch Mode 0 Pages 0-1
* 840h-87Fh Mode Dependent Scratch Mode 1 Pages 0-1
* 880h-8BFh Mode Dependent Scratch Mode 2 Pages 0-1
* 8C0h-8FFh Mode Dependent Scratch Mode 3 Pages 0-1
* 900h-93Fh Mode Dependent Scratch Mode 4 Pages 0-1
* 940h-97Fh Mode Dependent Scratch Mode 5 Pages 0-1
* 980h-9BFh Mode Dependent Scratch Mode 6 Pages 0-1
* 9C0h-9FFh Mode Dependent Scratch Mode 7 Pages 0-1
* A00h-A5Fh Mode Dependent Scratch Mode 8 Pages 0-2
* Mode Independent Scratch Pages 0-2
* A60h-A7Fh Mode Dependent Scratch Mode 8 Page 3
* Mode Independent Scratch Page 3
* A80h-AFFh Mode Independent Scratch Pages 4-7
* B00h-B1Fh Mode Dependent Scratch Mode 0 Page 2
* B20h-B3Fh Mode Dependent Scratch Mode 1 Page 2
* B40h-B5Fh Mode Dependent Scratch Mode 2 Page 2
* B60h-B7Fh Mode Dependent Scratch Mode 3 Page 2
* B80h-B9Fh Mode Dependent Scratch Mode 4 Page 2
* BA0h-BBFh Mode Dependent Scratch Mode 5 Page 2
* BC0h-BDFh Mode Dependent Scratch Mode 6 Page 2
* BE0h-BFFh Mode Dependent Scratch Mode 7 Page 2
*/
/* General macros */
#define CSEQ_PAGE_SIZE 32 /* Scratch page size (in bytes) */
/* All macros start with offsets from base + 0x800 (CMAPPEDSCR).
* Mode dependent scratch page 0, mode 0.
* For modes 1-7 you have to do arithmetic. */
#define CSEQ_LRM_SAVE_SINDEX (CMAPPEDSCR + 0x0000)
#define CSEQ_LRM_SAVE_SCBPTR (CMAPPEDSCR + 0x0002)
#define CSEQ_Q_LINK_HEAD (CMAPPEDSCR + 0x0004)
#define CSEQ_Q_LINK_TAIL (CMAPPEDSCR + 0x0006)
#define CSEQ_LRM_SAVE_SCRPAGE (CMAPPEDSCR + 0x0008)
/* Mode dependent scratch page 0 mode 8 macros. */
#define CSEQ_RET_ADDR (CMAPPEDSCR + 0x0200)
#define CSEQ_RET_SCBPTR (CMAPPEDSCR + 0x0202)
#define CSEQ_SAVE_SCBPTR (CMAPPEDSCR + 0x0204)
#define CSEQ_EMPTY_TRANS_CTX (CMAPPEDSCR + 0x0206)
#define CSEQ_RESP_LEN (CMAPPEDSCR + 0x0208)
#define CSEQ_TMF_SCBPTR (CMAPPEDSCR + 0x020A)
#define CSEQ_GLOBAL_PREV_SCB (CMAPPEDSCR + 0x020C)
#define CSEQ_GLOBAL_HEAD (CMAPPEDSCR + 0x020E)
#define CSEQ_CLEAR_LU_HEAD (CMAPPEDSCR + 0x0210)
#define CSEQ_TMF_OPCODE (CMAPPEDSCR + 0x0212)
#define CSEQ_SCRATCH_FLAGS (CMAPPEDSCR + 0x0213)
#define CSEQ_HSB_SITE (CMAPPEDSCR + 0x021A)
#define CSEQ_FIRST_INV_SCB_SITE (CMAPPEDSCR + 0x021C)
#define CSEQ_FIRST_INV_DDB_SITE (CMAPPEDSCR + 0x021E)
/* Mode dependent scratch page 1 mode 8 macros. */
#define CSEQ_LUN_TO_CLEAR (CMAPPEDSCR + 0x0220)
#define CSEQ_LUN_TO_CHECK (CMAPPEDSCR + 0x0228)
/* Mode dependent scratch page 2 mode 8 macros */
#define CSEQ_HQ_NEW_POINTER (CMAPPEDSCR + 0x0240)
#define CSEQ_HQ_DONE_BASE (CMAPPEDSCR + 0x0248)
#define CSEQ_HQ_DONE_POINTER (CMAPPEDSCR + 0x0250)
#define CSEQ_HQ_DONE_PASS (CMAPPEDSCR + 0x0254)
/* Mode independent scratch page 4 macros. */
#define CSEQ_Q_EXE_HEAD (CMAPPEDSCR + 0x0280)
#define CSEQ_Q_EXE_TAIL (CMAPPEDSCR + 0x0282)
#define CSEQ_Q_DONE_HEAD (CMAPPEDSCR + 0x0284)
#define CSEQ_Q_DONE_TAIL (CMAPPEDSCR + 0x0286)
#define CSEQ_Q_SEND_HEAD (CMAPPEDSCR + 0x0288)
#define CSEQ_Q_SEND_TAIL (CMAPPEDSCR + 0x028A)
#define CSEQ_Q_DMA2CHIM_HEAD (CMAPPEDSCR + 0x028C)
#define CSEQ_Q_DMA2CHIM_TAIL (CMAPPEDSCR + 0x028E)
#define CSEQ_Q_COPY_HEAD (CMAPPEDSCR + 0x0290)
#define CSEQ_Q_COPY_TAIL (CMAPPEDSCR + 0x0292)
#define CSEQ_REG0 (CMAPPEDSCR + 0x0294)
#define CSEQ_REG1 (CMAPPEDSCR + 0x0296)
#define CSEQ_REG2 (CMAPPEDSCR + 0x0298)
#define CSEQ_LINK_CTL_Q_MAP (CMAPPEDSCR + 0x029C)
#define CSEQ_MAX_CSEQ_MODE (CMAPPEDSCR + 0x029D)
#define CSEQ_FREE_LIST_HACK_COUNT (CMAPPEDSCR + 0x029E)
/* Mode independent scratch page 5 macros. */
#define CSEQ_EST_NEXUS_REQ_QUEUE (CMAPPEDSCR + 0x02A0)
#define CSEQ_EST_NEXUS_REQ_COUNT (CMAPPEDSCR + 0x02A8)
#define CSEQ_Q_EST_NEXUS_HEAD (CMAPPEDSCR + 0x02B0)
#define CSEQ_Q_EST_NEXUS_TAIL (CMAPPEDSCR + 0x02B2)
#define CSEQ_NEED_EST_NEXUS_SCB (CMAPPEDSCR + 0x02B4)
#define CSEQ_EST_NEXUS_REQ_HEAD (CMAPPEDSCR + 0x02B6)
#define CSEQ_EST_NEXUS_REQ_TAIL (CMAPPEDSCR + 0x02B7)
#define CSEQ_EST_NEXUS_SCB_OFFSET (CMAPPEDSCR + 0x02B8)
/* Mode independent scratch page 6 macros. */
#define CSEQ_INT_ROUT_RET_ADDR0 (CMAPPEDSCR + 0x02C0)
#define CSEQ_INT_ROUT_RET_ADDR1 (CMAPPEDSCR + 0x02C2)
#define CSEQ_INT_ROUT_SCBPTR (CMAPPEDSCR + 0x02C4)
#define CSEQ_INT_ROUT_MODE (CMAPPEDSCR + 0x02C6)
#define CSEQ_ISR_SCRATCH_FLAGS (CMAPPEDSCR + 0x02C7)
#define CSEQ_ISR_SAVE_SINDEX (CMAPPEDSCR + 0x02C8)
#define CSEQ_ISR_SAVE_DINDEX (CMAPPEDSCR + 0x02CA)
#define CSEQ_Q_MONIRTT_HEAD (CMAPPEDSCR + 0x02D0)
#define CSEQ_Q_MONIRTT_TAIL (CMAPPEDSCR + 0x02D2)
#define CSEQ_FREE_SCB_MASK (CMAPPEDSCR + 0x02D5)
#define CSEQ_BUILTIN_FREE_SCB_HEAD (CMAPPEDSCR + 0x02D6)
#define CSEQ_BUILTIN_FREE_SCB_TAIL (CMAPPEDSCR + 0x02D8)
#define CSEQ_EXTENDED_FREE_SCB_HEAD (CMAPPEDSCR + 0x02DA)
#define CSEQ_EXTENDED_FREE_SCB_TAIL (CMAPPEDSCR + 0x02DC)
/* Mode independent scratch page 7 macros. */
#define CSEQ_EMPTY_REQ_QUEUE (CMAPPEDSCR + 0x02E0)
#define CSEQ_EMPTY_REQ_COUNT (CMAPPEDSCR + 0x02E8)
#define CSEQ_Q_EMPTY_HEAD (CMAPPEDSCR + 0x02F0)
#define CSEQ_Q_EMPTY_TAIL (CMAPPEDSCR + 0x02F2)
#define CSEQ_NEED_EMPTY_SCB (CMAPPEDSCR + 0x02F4)
#define CSEQ_EMPTY_REQ_HEAD (CMAPPEDSCR + 0x02F6)
#define CSEQ_EMPTY_REQ_TAIL (CMAPPEDSCR + 0x02F7)
#define CSEQ_EMPTY_SCB_OFFSET (CMAPPEDSCR + 0x02F8)
#define CSEQ_PRIMITIVE_DATA (CMAPPEDSCR + 0x02FA)
#define CSEQ_TIMEOUT_CONST (CMAPPEDSCR + 0x02FC)
/***************************************************************************
* Link m Sequencer scratch RAM is 512 bytes.
* This scratch memory is divided into mode dependent and mode
* independent scratch with this memory further subdivided into
* pages of size 32 bytes. There are 4 pages (128 bytes) of
* mode independent scratch and 4 pages of dependent scratch
* memory for modes 0-2 (384 bytes).
*
* The host accesses this scratch in a different manner from the
* link sequencer. The sequencer has to use LSEQ registers
* LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
* mapping of the scratch memory is avaliable for software
* convenience and to prevent corruption while the sequencer is
* running. This memory is mapped onto addresses 800h - 9FFh.
*
* These addresses are mapped as follows:
*
* 800h-85Fh Mode Dependent Scratch Mode 0 Pages 0-2
* 860h-87Fh Mode Dependent Scratch Mode 0 Page 3
* Mode Dependent Scratch Mode 5 Page 0
* 880h-8DFh Mode Dependent Scratch Mode 1 Pages 0-2
* 8E0h-8FFh Mode Dependent Scratch Mode 1 Page 3
* Mode Dependent Scratch Mode 5 Page 1
* 900h-95Fh Mode Dependent Scratch Mode 2 Pages 0-2
* 960h-97Fh Mode Dependent Scratch Mode 2 Page 3
* Mode Dependent Scratch Mode 5 Page 2
* 980h-9DFh Mode Independent Scratch Pages 0-3
* 9E0h-9FFh Mode Independent Scratch Page 3
* Mode Dependent Scratch Mode 5 Page 3
*
****************************************************************************/
/* General macros */
#define LSEQ_MODE_SCRATCH_SIZE 0x80 /* Size of scratch RAM per mode */
#define LSEQ_PAGE_SIZE 0x20 /* Scratch page size (in bytes) */
#define LSEQ_MODE5_PAGE0_OFFSET 0x60
/* Common mode dependent scratch page 0 macros for modes 0,1,2, and 5 */
/* Indexed using LSEQ_MODE_SCRATCH_SIZE * mode, for modes 0,1,2. */
#define LmSEQ_RET_ADDR(LinkNum) (LmSCRATCH(LinkNum) + 0x0000)
#define LmSEQ_REG0_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0002)
#define LmSEQ_MODE_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0004)
/* Mode flag macros (byte 0) */
#define SAS_SAVECTX_OCCURRED 0x80
#define SAS_OOBSVC_OCCURRED 0x40
#define SAS_OOB_DEVICE_PRESENT 0x20
#define SAS_CFGHDR_OCCURRED 0x10
#define SAS_RCV_INTS_ARE_DISABLED 0x08
#define SAS_OOB_HOT_PLUG_CNCT 0x04
#define SAS_AWAIT_OPEN_CONNECTION 0x02
#define SAS_CFGCMPLT_OCCURRED 0x01
/* Mode flag macros (byte 1) */
#define SAS_RLSSCB_OCCURRED 0x80
#define SAS_FORCED_HEADER_MISS 0x40
#define LmSEQ_RET_ADDR2(LinkNum) (LmSCRATCH(LinkNum) + 0x0006)
#define LmSEQ_RET_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0008)
#define LmSEQ_OPCODE_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000B)
#define LmSEQ_DATA_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000C)
/* Mode dependent scratch page 0 macros for mode 0 (non-common) */
/* Absolute offsets */
#define LmSEQ_FIRST_INV_DDB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x000E)
#define LmSEQ_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0010)
#define LmSEQ_RESP_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x0012)
#define LmSEQ_FIRST_INV_SCB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x0014)
#define LmSEQ_INTEN_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0016)
#define LmSEQ_LINK_RST_FRM_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x001A)
#define LmSEQ_LINK_RST_PROTOCOL(LinkNum) (LmSCRATCH(LinkNum) + 0x001B)
#define LmSEQ_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x001C)
#define LmSEQ_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x001D)
#define LmSEQ_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x001E)
/* Mode dependent scratch page 0 macros for mode 1 (non-common) */
/* Absolute offsets */
#define LmSEQ_Q_XMIT_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x008E)
#define LmSEQ_M1_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0090)
#define LmSEQ_INI_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0092)
#define LmSEQ_FAILED_OPEN_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009A)
#define LmSEQ_XMIT_REQUEST_TYPE(LinkNum) (LmSCRATCH(LinkNum) + 0x009B)
#define LmSEQ_M1_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009C)
#define LmSEQ_M1_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x009D)
#define LmSEQ_M1_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x009E)
/* Mode dependent scratch page 0 macros for mode 2 (non-common) */
#define LmSEQ_PORT_COUNTER(LinkNum) (LmSCRATCH(LinkNum) + 0x010E)
#define LmSEQ_PM_TABLE_PTR(LinkNum) (LmSCRATCH(LinkNum) + 0x0110)
#define LmSEQ_SATA_INTERLOCK_TMR_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0112)
#define LmSEQ_IP_BITL(LinkNum) (LmSCRATCH(LinkNum) + 0x0114)
#define LmSEQ_COPY_SMP_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0116)
#define LmSEQ_P0M2_OFFS1AH(LinkNum) (LmSCRATCH(LinkNum) + 0x011A)
/* Mode dependent scratch page 0 macros for modes 4/5 (non-common) */
/* Absolute offsets */
#define LmSEQ_SAVED_OOB_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x006E)
#define LmSEQ_SAVED_OOB_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x006F)
#define LmSEQ_Q_LINK_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0070)
#define LmSEQ_LINK_RST_ERR(LinkNum) (LmSCRATCH(LinkNum) + 0x0072)
#define LmSEQ_SAVED_OOB_SIGNALS(LinkNum) (LmSCRATCH(LinkNum) + 0x0073)
#define LmSEQ_SAS_RESET_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0074)
#define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0075)
#define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum) (LmSCRATCH(LinkNum) + 0x0076)
#define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x0078)
#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007A)
#define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x007C)
#define LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E)
/* Mode dependent scratch page 1, mode 0 and mode 1 */
#define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x0020)
#define LmSEQ_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0030)
#define LmSEQ_M1_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x00A0)
#define LmSEQ_M1_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x00B0)
/* Mode dependent scratch page 1 macros for mode 2 */
/* Absolute offsets */
#define LmSEQ_INVALID_DWORD_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0120)
#define LmSEQ_DISPARITY_ERROR_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0124)
#define LmSEQ_LOSS_OF_SYNC_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0128)
/* Mode dependent scratch page 1 macros for mode 4/5 */
#define LmSEQ_FRAME_TYPE_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E0)
#define LmSEQ_HASHED_DEST_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E1)
#define LmSEQ_HASHED_SRC_ADDR_MASK_PRINT(LinkNum) (LmSCRATCH(LinkNum) + 0x00E4)
#define LmSEQ_HASHED_SRC_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E5)
#define LmSEQ_NUM_FILL_BYTES_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00EB)
#define LmSEQ_TAG_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00F0)
#define LmSEQ_TARGET_PORT_XFER_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x00F2)
#define LmSEQ_DATA_OFFSET(LinkNum) (LmSCRATCH(LinkNum) + 0x00F4)
/* Mode dependent scratch page 2 macros for mode 0 */
/* Absolute offsets */
#define LmSEQ_SMP_RCV_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0040)
#define LmSEQ_DEVICE_BITS(LinkNum) (LmSCRATCH(LinkNum) + 0x005B)
#define LmSEQ_SDB_DDB(LinkNum) (LmSCRATCH(LinkNum) + 0x005C)
#define LmSEQ_SDB_NUM_TAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x005E)
#define LmSEQ_SDB_CURR_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x005F)
/* Mode dependent scratch page 2 macros for mode 1 */
/* Absolute offsets */
/* byte 0 bits 1-0 are domain select. */
#define LmSEQ_TX_ID_ADDR_FRAME(LinkNum) (LmSCRATCH(LinkNum) + 0x00C0)
#define LmSEQ_OPEN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00C8)
#define LmSEQ_SRST_AS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00CC)
#define LmSEQ_LAST_LOADED_SG_EL(LinkNum) (LmSCRATCH(LinkNum) + 0x00D4)
/* Mode dependent scratch page 2 macros for mode 2 */
/* Absolute offsets */
#define LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0140)
#define LmSEQ_CLOSE_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0144)
#define LmSEQ_BREAK_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0148)
#define LmSEQ_DWS_RESET_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x014C)
#define LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(LinkNum) \
(LmSCRATCH(LinkNum) + 0x0150)
#define LmSEQ_MCTL_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0154)
/* Mode dependent scratch page 2 macros for mode 5 */
#define LmSEQ_COMINIT_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0160)
#define LmSEQ_RCV_ID_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0164)
#define LmSEQ_RCV_FIS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0168)
#define LmSEQ_DEV_PRES_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x016C)
/* Mode dependent scratch page 3 macros for modes 0 and 1 */
/* None defined */
/* Mode dependent scratch page 3 macros for modes 2 and 5 */
/* None defined */
/* Mode Independent Scratch page 0 macros. */
#define LmSEQ_Q_TGTXFR_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0180)
#define LmSEQ_Q_TGTXFR_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x0182)
#define LmSEQ_LINK_NUMBER(LinkNum) (LmSCRATCH(LinkNum) + 0x0186)
#define LmSEQ_SCRATCH_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0187)
/*
* Currently only bit 0, SAS_DWSAQD, is used.
*/
#define SAS_DWSAQD 0x01 /*
* DWSSTATUS: DWSAQD
* bit las read in ISR.
*/
#define LmSEQ_CONNECTION_STATE(LinkNum) (LmSCRATCH(LinkNum) + 0x0188)
/* Connection states (byte 0) */
#define SAS_WE_OPENED_CS 0x01
#define SAS_DEVICE_OPENED_CS 0x02
#define SAS_WE_SENT_DONE_CS 0x04
#define SAS_DEVICE_SENT_DONE_CS 0x08
#define SAS_WE_SENT_CLOSE_CS 0x10
#define SAS_DEVICE_SENT_CLOSE_CS 0x20
#define SAS_WE_SENT_BREAK_CS 0x40
#define SAS_DEVICE_SENT_BREAK_CS 0x80
/* Connection states (byte 1) */
#define SAS_OPN_TIMEOUT_OR_OPN_RJCT_CS 0x01
#define SAS_AIP_RECEIVED_CS 0x02
#define SAS_CREDIT_TIMEOUT_OCCURRED_CS 0x04
#define SAS_ACKNAK_TIMEOUT_OCCURRED_CS 0x08
#define SAS_SMPRSP_TIMEOUT_OCCURRED_CS 0x10
#define SAS_DONE_TIMEOUT_OCCURRED_CS 0x20
/* Connection states (byte 2) */
#define SAS_SMP_RESPONSE_RECEIVED_CS 0x01
#define SAS_INTLK_TIMEOUT_OCCURRED_CS 0x02
#define SAS_DEVICE_SENT_DMAT_CS 0x04
#define SAS_DEVICE_SENT_SYNCSRST_CS 0x08
#define SAS_CLEARING_AFFILIATION_CS 0x20
#define SAS_RXTASK_ACTIVE_CS 0x40
#define SAS_TXTASK_ACTIVE_CS 0x80
/* Connection states (byte 3) */
#define SAS_PHY_LOSS_OF_SIGNAL_CS 0x01
#define SAS_DWS_TIMER_EXPIRED_CS 0x02
#define SAS_LINK_RESET_NOT_COMPLETE_CS 0x04
#define SAS_PHY_DISABLED_CS 0x08
#define SAS_LINK_CTL_TASK_ACTIVE_CS 0x10
#define SAS_PHY_EVENT_TASK_ACTIVE_CS 0x20
#define SAS_DEVICE_SENT_ID_FRAME_CS 0x40
#define SAS_DEVICE_SENT_REG_FIS_CS 0x40
#define SAS_DEVICE_SENT_HARD_RESET_CS 0x80
#define SAS_PHY_IS_DOWN_FLAGS (SAS_PHY_LOSS_OF_SIGNAL_CS|\
SAS_DWS_TIMER_EXPIRED_CS |\
SAS_LINK_RESET_NOT_COMPLETE_CS|\
SAS_PHY_DISABLED_CS)
#define SAS_LINK_CTL_PHY_EVENT_FLAGS (SAS_LINK_CTL_TASK_ACTIVE_CS |\
SAS_PHY_EVENT_TASK_ACTIVE_CS |\
SAS_DEVICE_SENT_ID_FRAME_CS |\
SAS_DEVICE_SENT_HARD_RESET_CS)
#define LmSEQ_CONCTL(LinkNum) (LmSCRATCH(LinkNum) + 0x018C)
#define LmSEQ_CONSTAT(LinkNum) (LmSCRATCH(LinkNum) + 0x018E)
#define LmSEQ_CONNECTION_MODES(LinkNum) (LmSCRATCH(LinkNum) + 0x018F)
#define LmSEQ_REG1_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0192)
#define LmSEQ_REG2_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0194)
#define LmSEQ_REG3_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0196)
#define LmSEQ_REG0_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0198)
/* Mode independent scratch page 1 macros. */
#define LmSEQ_EST_NEXUS_SCBPTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A0)
#define LmSEQ_EST_NEXUS_SCBPTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A2)
#define LmSEQ_EST_NEXUS_SCBPTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01A4)
#define LmSEQ_EST_NEXUS_SCBPTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01A6)
#define LmSEQ_EST_NEXUS_SCB_OPCODE0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A8)
#define LmSEQ_EST_NEXUS_SCB_OPCODE1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A9)
#define LmSEQ_EST_NEXUS_SCB_OPCODE2(LinkNum) (LmSCRATCH(LinkNum) + 0x01AA)
#define LmSEQ_EST_NEXUS_SCB_OPCODE3(LinkNum) (LmSCRATCH(LinkNum) + 0x01AB)
#define LmSEQ_EST_NEXUS_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01AC)
#define LmSEQ_EST_NEXUS_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AD)
#define LmSEQ_EST_NEXUS_BUF_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AE)
#define LmSEQ_TIMEOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01B8)
#define LmSEQ_ISR_SAVE_SINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BC)
#define LmSEQ_ISR_SAVE_DINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BE)
/* Mode independent scratch page 2 macros. */
#define LmSEQ_EMPTY_SCB_PTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C0)
#define LmSEQ_EMPTY_SCB_PTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C2)
#define LmSEQ_EMPTY_SCB_PTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01C4)
#define LmSEQ_EMPTY_SCB_PTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01C6)
#define LmSEQ_EMPTY_SCB_OPCD0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C8)
#define LmSEQ_EMPTY_SCB_OPCD1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C9)
#define LmSEQ_EMPTY_SCB_OPCD2(LinkNum) (LmSCRATCH(LinkNum) + 0x01CA)
#define LmSEQ_EMPTY_SCB_OPCD3(LinkNum) (LmSCRATCH(LinkNum) + 0x01CB)
#define LmSEQ_EMPTY_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01CC)
#define LmSEQ_EMPTY_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CD)
#define LmSEQ_EMPTY_BUFS_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CE)
#define LmSEQ_ATA_SCR_REGS(LinkNum) (LmSCRATCH(LinkNum) + 0x01D4)
/* Mode independent scratch page 3 macros. */
#define LmSEQ_DEV_PRES_TMR_TOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01E0)
#define LmSEQ_SATA_INTERLOCK_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E4)
#define LmSEQ_STP_SHUTDOWN_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E8)
#define LmSEQ_SRST_ASSERT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01EC)
#define LmSEQ_RCV_FIS_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F0)
#define LmSEQ_ONE_MILLISEC_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F4)
#define LmSEQ_TEN_MS_COMINIT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F8)
#define LmSEQ_SMP_RCV_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01FC)
#endif