51c62982a3
Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:
<mach/pxa25x.h> - for pxa25x based platforms
<mach/pxa27x.h> - for pxa27x based platforms
<mach/pxa300.h> - for pxa300 based platforms
<mach/pxa320.h> - for pxa320 based platforms
<mach/pxa930.h> - for pxa930 based platforms
NOTE:
1. one header one board file, they are not compatible (i.e. they have
conflicting definitions which won't compile if included together).
2. Unless strictly necessary, the following header files are considered
to be SoC files use _only_, and is not recommended to be included in
board code:
<mach/hardware.h>
<mach/pxa-regs.h>
<mach/pxa2xx-regs.h>
<mach/pxa3xx-regs.h>
<mach/mfp.h>
<mach/mfp-pxa2xx.h>
<mach/mfp-pxa25x.h>
<mach/mfp-pxa27x.h>
<mach/mfp-pxa3xx.h>
<mach/mfp-pxa300.h>
<mach/mfp-pxa320.h>
<mach/mfp-pxa930.h>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
216 lines
5.4 KiB
C
216 lines
5.4 KiB
C
/*
|
|
* Hardware definitions for the Toshiba eseries PDAs
|
|
*
|
|
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
|
|
*
|
|
* This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/mfd/tc6393xb.h>
|
|
|
|
#include <video/w100fb.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <mach/pxa25x.h>
|
|
#include <mach/eseries-gpio.h>
|
|
#include <mach/udc.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#include "generic.h"
|
|
#include "eseries.h"
|
|
#include "clock.h"
|
|
|
|
/* ------------------------ e800 LCD definitions ------------------------- */
|
|
|
|
static struct w100_gen_regs e800_lcd_regs = {
|
|
.lcd_format = 0x00008003,
|
|
.lcdd_cntl1 = 0x02a00000,
|
|
.lcdd_cntl2 = 0x0003ffff,
|
|
.genlcd_cntl1 = 0x000ff2a3,
|
|
.genlcd_cntl2 = 0x000002a3,
|
|
.genlcd_cntl3 = 0x000102aa,
|
|
};
|
|
|
|
static struct w100_mode e800_lcd_mode[2] = {
|
|
[0] = {
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.left_margin = 52,
|
|
.right_margin = 148,
|
|
.upper_margin = 2,
|
|
.lower_margin = 6,
|
|
.crtc_ss = 0x80350034,
|
|
.crtc_ls = 0x802b0026,
|
|
.crtc_gs = 0x80160016,
|
|
.crtc_vpos_gs = 0x00020003,
|
|
.crtc_rev = 0x0040001d,
|
|
.crtc_dclk = 0xe0000000,
|
|
.crtc_gclk = 0x82a50049,
|
|
.crtc_goe = 0x80ee001c,
|
|
.crtc_ps1_active = 0x00000000,
|
|
.pll_freq = 128,
|
|
.pixclk_divider = 4,
|
|
.pixclk_divider_rotated = 6,
|
|
.pixclk_src = CLK_SRC_PLL,
|
|
.sysclk_divider = 0,
|
|
.sysclk_src = CLK_SRC_PLL,
|
|
},
|
|
[1] = {
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.left_margin = 15,
|
|
.right_margin = 88,
|
|
.upper_margin = 0,
|
|
.lower_margin = 7,
|
|
.crtc_ss = 0xd010000f,
|
|
.crtc_ls = 0x80070003,
|
|
.crtc_gs = 0x80000000,
|
|
.crtc_vpos_gs = 0x01460147,
|
|
.crtc_rev = 0x00400003,
|
|
.crtc_dclk = 0xa1700030,
|
|
.crtc_gclk = 0x814b0008,
|
|
.crtc_goe = 0x80cc0015,
|
|
.crtc_ps1_active = 0x00000000,
|
|
.pll_freq = 100,
|
|
.pixclk_divider = 6, /* Wince uses 14 which gives a */
|
|
.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
|
|
.pixclk_src = CLK_SRC_PLL,
|
|
.sysclk_divider = 0,
|
|
.sysclk_src = CLK_SRC_PLL,
|
|
}
|
|
};
|
|
|
|
|
|
static struct w100_gpio_regs e800_w100_gpio_info = {
|
|
.init_data1 = 0xc13fc019,
|
|
.gpio_dir1 = 0x3e40df7f,
|
|
.gpio_oe1 = 0x003c3000,
|
|
.init_data2 = 0x00000000,
|
|
.gpio_dir2 = 0x00000000,
|
|
.gpio_oe2 = 0x00000000,
|
|
};
|
|
|
|
static struct w100_mem_info e800_w100_mem_info = {
|
|
.ext_cntl = 0x09640011,
|
|
.sdram_mode_reg = 0x00600021,
|
|
.ext_timing_cntl = 0x10001545,
|
|
.io_cntl = 0x7ddd7333,
|
|
.size = 0x1fffff,
|
|
};
|
|
|
|
static void e800_tg_change(struct w100fb_par *par)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
|
|
if (par->mode->xres == 480)
|
|
tmp |= 0x100;
|
|
else
|
|
tmp &= ~0x100;
|
|
w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
|
|
}
|
|
|
|
static struct w100_tg_info e800_tg_info = {
|
|
.change = e800_tg_change,
|
|
};
|
|
|
|
static struct w100fb_mach_info e800_fb_info = {
|
|
.modelist = e800_lcd_mode,
|
|
.num_modes = 2,
|
|
.regs = &e800_lcd_regs,
|
|
.gpio = &e800_w100_gpio_info,
|
|
.mem = &e800_w100_mem_info,
|
|
.tg = &e800_tg_info,
|
|
.xtal_freq = 16000000,
|
|
};
|
|
|
|
static struct resource e800_fb_resources[] = {
|
|
[0] = {
|
|
.start = 0x0c000000,
|
|
.end = 0x0cffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device e800_fb_device = {
|
|
.name = "w100fb",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &e800_fb_info,
|
|
},
|
|
.num_resources = ARRAY_SIZE(e800_fb_resources),
|
|
.resource = e800_fb_resources,
|
|
};
|
|
|
|
/* --------------------------- UDC definitions --------------------------- */
|
|
|
|
static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
|
|
.gpio_vbus = GPIO_E800_USB_DISC,
|
|
.gpio_pullup = GPIO_E800_USB_PULLUP,
|
|
.gpio_pullup_inverted = 1
|
|
};
|
|
|
|
/* ----------------- e800 tc6393xb parameters ------------------ */
|
|
|
|
static struct tc6393xb_platform_data e800_tc6393xb_info = {
|
|
.irq_base = IRQ_BOARD_START,
|
|
.scr_pll2cr = 0x0cc1,
|
|
.scr_gper = 0,
|
|
.gpio_base = -1,
|
|
.suspend = &eseries_tmio_suspend,
|
|
.resume = &eseries_tmio_resume,
|
|
.enable = &eseries_tmio_enable,
|
|
.disable = &eseries_tmio_disable,
|
|
};
|
|
|
|
static struct platform_device e800_tc6393xb_device = {
|
|
.name = "tc6393xb",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &e800_tc6393xb_info,
|
|
},
|
|
.num_resources = 2,
|
|
.resource = eseries_tmio_resources,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&e800_fb_device,
|
|
&e800_tc6393xb_device,
|
|
};
|
|
|
|
static void __init e800_init(void)
|
|
{
|
|
clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev,
|
|
"GPIO11_CLK", NULL),
|
|
eseries_get_tmio_gpios();
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
pxa_set_udc_info(&e800_udc_mach_info);
|
|
}
|
|
|
|
MACHINE_START(E800, "Toshiba e800")
|
|
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.boot_params = 0xa0000100,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa25x_init_irq,
|
|
.fixup = eseries_fixup,
|
|
.init_machine = e800_init,
|
|
.timer = &pxa_timer,
|
|
MACHINE_END
|
|
|