Eric Miao da065a0b36 [ARM] pxa: move GPIO register definitions into <mach/gpio.h> ... This makes gpio.c fully independent of pxa-regs.h (except for the virtual address of the registers). Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>		2009-03-09 21:22:37 +08:00
..
audio.h
bitfield.h
camera.h	V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver	2008-10-12 09:36:50 -02:00
clkdev.h	[ARM] pxa: convert to clkdev and match clocks by struct device where possible	2008-11-27 12:38:23 +00:00
colibri.h
corgi.h	Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"	2008-10-21 09:42:29 +08:00
debug-macro.S
dma.h	[ARM] pxa: move DMA registers definitions into <mach/dma.h>	2009-03-09 21:22:36 +08:00
entry-macro.S	[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15	2008-09-01 17:13:26 +01:00
eseries-gpio.h	[ARM] pxa: Add multi-io support for e-series	2008-12-15 03:29:34 +00:00
eseries-irq.h
gpio.h	[ARM] pxa: move GPIO register definitions into <mach/gpio.h>	2009-03-09 21:22:37 +08:00
gumstix.h	[ARM] 5354/1: mach-pxa: add AM300 platform driver v3	2009-02-10 11:28:00 +00:00
h5000.h	[ARM] pxa: add basic support for HP iPAQ h5000	2008-12-02 14:43:50 +08:00
hardware.h	Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel	2008-12-29 18:08:11 +00:00
i2c.h	[ARM] 5278/1: i2c-pxa fast mode support	2008-10-03 15:57:06 +01:00
idp.h
io.h	[ARM] Add a common typesafe __io implementation	2008-11-30 11:45:54 +00:00
irda.h
irqs.h	[ARM] pxa: fix redefinition of NR_IRQS	2008-10-17 13:19:08 +01:00
littleton.h	[ARM] pxa/littleton: add preliminary I2C board info (da9034 + max7320)	2008-12-17 22:52:12 +08:00
lpd270.h
lubbock.h
magician.h	[ARM] pxa/magician: Enable pxa27x_udc and gpio_vbus	2009-02-02 16:48:43 +08:00
mainstone.h
memory.h	[ARM] Ensure that both MAX_DMA_ADDRESS and ISA_DMA_THRESHOLD are defined	2008-11-30 13:26:47 +00:00
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h	[ARM] pxa: add support for additional GPIOs on PXA26x	2008-12-02 14:42:37 +08:00
mfp-pxa27x.h	[ARM] pxa: add missing GPIOs definitions	2008-12-02 14:42:41 +08:00
mfp-pxa300.h
mfp-pxa320.h	[ARM] pxa: fix incorrect definitions of SSP3 on pxa320	2008-08-26 17:02:00 +01:00
mfp-pxa930.h	[ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)	2008-12-29 17:57:23 +08:00
mfp.h	[ARM] pxa: better MFP low power state support for pxa25x/pxa27x	2008-09-26 23:43:20 +01:00
mioa701.h	[ARM] pxa/MioA701: discovered new gpio definitions.	2008-12-02 14:43:48 +08:00
mmc.h
mtd-xip.h	[ARM] move asm/xip.h's mach/hardware.h include to mach/xip.h	2008-12-14 13:22:51 +00:00
ohci.h	[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers	2008-10-07 19:12:57 +01:00
palmasoc.h	ASoC: Add Palm/PXA27x unified ASoC audio driver	2008-11-05 22:11:16 +00:00
palmld.h	[ARM] pxa: PalmLD initial support	2009-01-21 15:06:34 +08:00
palmt5.h	[ARM] pxa: PalmT5 initial support	2009-01-21 15:06:34 +08:00
palmtx.h
palmz72.h	[ARM] 5239/1: Palm Zire 72 power management support	2008-10-09 15:12:07 +01:00
pcm027.h
pcm990_baseboard.h
pm.h	[ARM] pxa: Allow platforms to override PSPR setting	2008-09-09 16:32:52 +01:00
poodle.h	[ARM] pxa/poodle: prepare scoop for the generic GPIO API	2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
pxa2xx-gpio.h	[ARM] pxa: move GPIO register definitions into <mach/gpio.h>	2009-03-09 21:22:37 +08:00
pxa2xx-regs.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
pxa3xx_nand.h	[MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform data	2008-09-01 21:38:34 +01:00
pxa3xx-regs.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
pxa25x-udc.h
pxa25x.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
pxa27x_keypad.h
pxa27x-udc.h
pxa27x.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
pxa300.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
pxa320.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
pxa930_rotary.h	Input: add support for enhanced rotary controller on pxa930 and pxa935	2008-12-29 04:59:16 -08:00
pxa930_trkball.h	Input: add support for trackball on pxa930 and pxa935	2008-12-29 04:58:58 -08:00
pxa930.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
pxa-regs.h	[ARM] pxa: move GPIO register definitions into <mach/gpio.h>	2009-03-09 21:22:37 +08:00
pxafb.h	[ARM] pxafb: allow video memory size to be configurable	2008-12-29 17:59:16 +08:00
regs-ac97.h	[ARM] pxa: fix missing of __REG() definition for ac97 registers access	2009-01-19 11:39:36 +08:00
regs-lcd.h	[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices	2008-12-29 18:00:04 +08:00
regs-ssp.h	[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage	2009-03-09 21:22:36 +08:00
regs-uart.h	[ARM] pxa: move UART register definitions into dedicated regs-uart.h	2008-12-02 14:42:38 +08:00
reset.h	[ARM] fix kernel-doc syntax	2008-12-14 12:02:39 +00:00
sharpsl.h	[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl	2008-10-29 11:45:37 +08:00
spitz.h	[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h	2008-10-21 22:45:57 +08:00
ssp.h	[ARM] 5224/2: PXA SSP: Introduce register accessors	2008-09-09 16:32:52 +01:00
system.h
timex.h	[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant	2008-12-29 17:57:48 +08:00
tosa_bt.h
tosa.h	backlight: add support for Sharp SL-6000 LCD and backlight drivers	2008-10-21 00:19:49 +01:00
trizeps4.h	[ARM] 5204/1: Trizeps4 SOM update	2008-10-01 22:33:11 +01:00
udc.h
uncompress.h	[ARM] pxa: initial support for the Imote2 platform	2008-12-17 22:51:39 +08:00
viper.h	Basic support for the Arcom/Eurotech Viper SBC.	2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h	misc: replace remaining __FUNCTION__ with __func__	2008-10-20 16:17:42 -07:00