android_kernel_xiaomi_sm8350/drivers/usb/gadget/u_ether.h
David Brownell da741b8c56 usb ethernet gadget: split CDC Ethernet function
This is a "CDC Ethernet" (ECM) function driver, extracted from the
all-in-one Ethernet gadget driver.

This is a good example of how to implement interface altsettings.
In fact it's currently the only such example in the gadget stack,
pending addition of OBEX support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:16:13 -07:00

111 lines
3.5 KiB
C

/*
* u_ether.h -- interface to USB gadget "ethernet link" utilities
*
* Copyright (C) 2003-2005,2008 David Brownell
* Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
* Copyright (C) 2008 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __U_ETHER_H
#define __U_ETHER_H
#include <linux/err.h>
#include <linux/if_ether.h>
#include <linux/usb/composite.h>
#include <linux/usb/cdc.h>
#include "gadget_chips.h"
/*
* This represents the USB side of an "ethernet" link, managed by a USB
* function which provides control and (maybe) framing. Two functions
* in different configurations could share the same ethernet link/netdev.
*
* There is currently a limitation that one instance of this function
* may be present in any given configuration.
*/
struct gether {
struct usb_function func;
/* updated by gether_{connect,disconnect} */
struct eth_dev *ioport;
/* endpoints handle full and/or high speeds */
struct usb_ep *in_ep;
struct usb_ep *out_ep;
/* descriptors match device speed at gether_connect() time */
struct usb_endpoint_descriptor *in;
struct usb_endpoint_descriptor *out;
bool is_zlp_ok;
u16 cdc_filter;
/* hooks for added framing, as needed for RNDIS and EEM.
* we currently don't support multiple frames per SKB.
*/
u32 header_len;
struct sk_buff *(*wrap)(struct sk_buff *skb);
int (*unwrap)(struct sk_buff *skb);
/* called on network open/close */
void (*open)(struct gether *);
void (*close)(struct gether *);
};
#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
|USB_CDC_PACKET_TYPE_PROMISCUOUS \
|USB_CDC_PACKET_TYPE_DIRECTED)
/* netdev setup/teardown as directed by the gadget driver */
int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]);
void gether_cleanup(void);
/* connect/disconnect is handled by individual functions */
struct net_device *gether_connect(struct gether *);
void gether_disconnect(struct gether *);
/* Some controllers can't support CDC Ethernet (ECM) ... */
static inline bool can_support_ecm(struct usb_gadget *gadget)
{
if (!gadget_supports_altsettings(gadget))
return false;
/* SA1100 can do ECM, *without* status endpoint ... but we'll
* only use it in non-ECM mode for backwards compatibility
* (and since we currently require a status endpoint)
*/
if (gadget_is_sa1100(gadget))
return false;
/* Everything else is *presumably* fine ... but this is a bit
* chancy, so be **CERTAIN** there are no hardware issues with
* your controller. Add it above if it can't handle CDC.
*/
return true;
}
/* each configuration may bind one instance of an ethernet link */
int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
#endif /* __U_ETHER_H */