ac840605f3
Currently, there are two different fields in the mv643xx_eth_platform_data struct that together describe the PHY address -- one field (phy_addr) has the address of the PHY, but if that address is zero, a second field (force_phy_addr) needs to be set to distinguish the actual address zero from a zero due to not having filled in the PHY address explicitly (which should mean 'use the default PHY address'). If we are a bit smarter about the encoding of the phy_addr field, we can avoid the need for a second field -- this patch does that. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
93 lines
2.3 KiB
C
93 lines
2.3 KiB
C
/*
|
|
* arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
|
|
*
|
|
* Marvell RD-88F6192-NAS Reference Board Setup
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/orion_spi.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <mach/kirkwood.h>
|
|
#include "common.h"
|
|
|
|
#define RD88F6192_GPIO_USB_VBUS 10
|
|
|
|
static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
};
|
|
|
|
static struct mv_sata_platform_data rd88f6192_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
static const struct flash_platform_data rd88F6192_spi_slave_data = {
|
|
.type = "m25p128",
|
|
};
|
|
|
|
static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
|
|
{
|
|
.modalias = "m25p80",
|
|
.platform_data = &rd88F6192_spi_slave_data,
|
|
.irq = -1,
|
|
.max_speed_hz = 20000000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
static void __init rd88f6192_init(void)
|
|
{
|
|
/*
|
|
* Basic setup. Needs to be called early.
|
|
*/
|
|
kirkwood_init();
|
|
|
|
kirkwood_ehci_init();
|
|
kirkwood_ge00_init(&rd88f6192_ge00_data);
|
|
kirkwood_rtc_init();
|
|
kirkwood_sata_init(&rd88f6192_sata_data);
|
|
spi_register_board_info(rd88F6192_spi_slave_info,
|
|
ARRAY_SIZE(rd88F6192_spi_slave_info));
|
|
kirkwood_spi_init();
|
|
kirkwood_uart0_init();
|
|
kirkwood_xor0_init();
|
|
kirkwood_xor1_init();
|
|
}
|
|
|
|
static int __init rd88f6192_pci_init(void)
|
|
{
|
|
if (machine_is_rd88f6192_nas())
|
|
kirkwood_pcie_init();
|
|
|
|
return 0;
|
|
}
|
|
subsys_initcall(rd88f6192_pci_init);
|
|
|
|
MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
|
|
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
|
|
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = rd88f6192_init,
|
|
.map_io = kirkwood_map_io,
|
|
.init_irq = kirkwood_init_irq,
|
|
.timer = &kirkwood_timer,
|
|
MACHINE_END
|