android_kernel_xiaomi_sm8350/include/linux/topology.h
Peter Zijlstra 182a85f8a1 sched: Disable wakeup balancing
Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't
really mind too much, SD_BALANCE_NEWIDLE picks up most of the
slack.

On a dual socket, quad core, dual thread nehalem system:

sysbench (--num_threads=16):

 SD_BALANCE_WAKE-: 13982 tx/s
 SD_BALANCE_WAKE+: 15688 tx/s

kbuild (-j16):

 SD_BALANCE_WAKE-: 47.648295846  seconds time elapsed   ( +-   0.312% )
 SD_BALANCE_WAKE+: 47.608607360  seconds time elapsed   ( +-   0.026% )

(same within noise)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 16:44:33 +02:00

233 lines
6.6 KiB
C

/*
* include/linux/topology.h
*
* Written by: Matthew Dobson, IBM Corporation
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <colpatch@us.ibm.com>
*/
#ifndef _LINUX_TOPOLOGY_H
#define _LINUX_TOPOLOGY_H
#include <linux/cpumask.h>
#include <linux/bitops.h>
#include <linux/mmzone.h>
#include <linux/smp.h>
#include <asm/topology.h>
#ifndef node_has_online_mem
#define node_has_online_mem(nid) (1)
#endif
#ifndef nr_cpus_node
#define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
#endif
#define for_each_node_with_cpus(node) \
for_each_online_node(node) \
if (nr_cpus_node(node))
int arch_update_cpu_topology(void);
/* Conform to ACPI 2.0 SLIT distance definitions */
#define LOCAL_DISTANCE 10
#define REMOTE_DISTANCE 20
#ifndef node_distance
#define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
#endif
#ifndef RECLAIM_DISTANCE
/*
* If the distance between nodes in a system is larger than RECLAIM_DISTANCE
* (in whatever arch specific measurement units returned by node_distance())
* then switch on zone reclaim on boot.
*/
#define RECLAIM_DISTANCE 20
#endif
#ifndef PENALTY_FOR_NODE_WITH_CPUS
#define PENALTY_FOR_NODE_WITH_CPUS (1)
#endif
/*
* Below are the 3 major initializers used in building sched_domains:
* SD_SIBLING_INIT, for SMT domains
* SD_CPU_INIT, for SMP domains
* SD_NODE_INIT, for NUMA domains
*
* Any architecture that cares to do any tuning to these values should do so
* by defining their own arch-specific initializer in include/asm/topology.h.
* A definition there will automagically override these default initializers
* and allow arch-specific performance tuning of sched_domains.
* (Only non-zero and non-null fields need be specified.)
*/
#ifdef CONFIG_SCHED_SMT
/* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is,
* so can't we drop this in favor of CONFIG_SCHED_SMT?
*/
#define ARCH_HAS_SCHED_WAKE_IDLE
/* Common values for SMT siblings */
#ifndef SD_SIBLING_INIT
#define SD_SIBLING_INIT (struct sched_domain) { \
.min_interval = 1, \
.max_interval = 2, \
.busy_factor = 64, \
.imbalance_pct = 110, \
\
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 1*SD_BALANCE_EXEC \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
| 1*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| 0*SD_PREFER_SIBLING \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
.smt_gain = 1178, /* 15% */ \
}
#endif
#endif /* CONFIG_SCHED_SMT */
#ifdef CONFIG_SCHED_MC
/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
#ifndef SD_MC_INIT
#define SD_MC_INIT (struct sched_domain) { \
.min_interval = 1, \
.max_interval = 4, \
.busy_factor = 64, \
.imbalance_pct = 125, \
.cache_nice_tries = 1, \
.busy_idx = 2, \
.wake_idx = 0, \
.forkexec_idx = 0, \
\
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 1*SD_BALANCE_EXEC \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
| 1*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| sd_balance_for_mc_power() \
| sd_power_saving_flags() \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
}
#endif
#endif /* CONFIG_SCHED_MC */
/* Common values for CPUs */
#ifndef SD_CPU_INIT
#define SD_CPU_INIT (struct sched_domain) { \
.min_interval = 1, \
.max_interval = 4, \
.busy_factor = 64, \
.imbalance_pct = 125, \
.cache_nice_tries = 1, \
.busy_idx = 2, \
.idle_idx = 1, \
.newidle_idx = 0, \
.wake_idx = 0, \
.forkexec_idx = 0, \
\
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 1*SD_BALANCE_EXEC \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
| 1*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| sd_balance_for_package_power() \
| sd_power_saving_flags() \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
}
#endif
/* sched_domains SD_ALLNODES_INIT for NUMA machines */
#define SD_ALLNODES_INIT (struct sched_domain) { \
.min_interval = 64, \
.max_interval = 64*num_online_cpus(), \
.busy_factor = 128, \
.imbalance_pct = 133, \
.cache_nice_tries = 1, \
.busy_idx = 3, \
.idle_idx = 3, \
.flags = 1*SD_LOAD_BALANCE \
| 1*SD_BALANCE_NEWIDLE \
| 0*SD_BALANCE_EXEC \
| 0*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 0*SD_WAKE_AFFINE \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
| 1*SD_SERIALIZE \
| 0*SD_PREFER_SIBLING \
, \
.last_balance = jiffies, \
.balance_interval = 64, \
}
#ifdef CONFIG_NUMA
#ifndef SD_NODE_INIT
#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
#endif
#endif /* CONFIG_NUMA */
#ifndef topology_physical_package_id
#define topology_physical_package_id(cpu) ((void)(cpu), -1)
#endif
#ifndef topology_core_id
#define topology_core_id(cpu) ((void)(cpu), 0)
#endif
#ifndef topology_thread_siblings
#define topology_thread_siblings(cpu) cpumask_of_cpu(cpu)
#endif
#ifndef topology_core_siblings
#define topology_core_siblings(cpu) cpumask_of_cpu(cpu)
#endif
#ifndef topology_thread_cpumask
#define topology_thread_cpumask(cpu) cpumask_of(cpu)
#endif
#ifndef topology_core_cpumask
#define topology_core_cpumask(cpu) cpumask_of(cpu)
#endif
/* Returns the number of the current Node. */
#ifndef numa_node_id
#define numa_node_id() (cpu_to_node(raw_smp_processor_id()))
#endif
#endif /* _LINUX_TOPOLOGY_H */