42961ee8fc
Updating DDB0 inside aic94xx driver itself caused SMP command timeout. I hit this SMP timeout problem twice but I am not able to reproduce it since then. Here is a fix that retries an SMP command. Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
1866 lines
46 KiB
C
1866 lines
46 KiB
C
/*
|
|
* Serial Attached SCSI (SAS) Expander discovery and configuration
|
|
*
|
|
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
|
|
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
|
|
*
|
|
* This file is licensed under GPLv2.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include "sas_internal.h"
|
|
|
|
#include <scsi/scsi_transport.h>
|
|
#include <scsi/scsi_transport_sas.h>
|
|
#include "../scsi_sas_internal.h"
|
|
|
|
static int sas_discover_expander(struct domain_device *dev);
|
|
static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
|
|
static int sas_configure_phy(struct domain_device *dev, int phy_id,
|
|
u8 *sas_addr, int include);
|
|
static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr);
|
|
|
|
#if 0
|
|
/* FIXME: smp needs to migrate into the sas class */
|
|
static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t);
|
|
static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t);
|
|
#endif
|
|
|
|
/* ---------- SMP task management ---------- */
|
|
|
|
static void smp_task_timedout(unsigned long _task)
|
|
{
|
|
struct sas_task *task = (void *) _task;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&task->task_state_lock, flags);
|
|
if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
|
|
task->task_state_flags |= SAS_TASK_STATE_ABORTED;
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
|
|
complete(&task->completion);
|
|
}
|
|
|
|
static void smp_task_done(struct sas_task *task)
|
|
{
|
|
if (!del_timer(&task->timer))
|
|
return;
|
|
complete(&task->completion);
|
|
}
|
|
|
|
/* Give it some long enough timeout. In seconds. */
|
|
#define SMP_TIMEOUT 10
|
|
|
|
static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
|
|
void *resp, int resp_size)
|
|
{
|
|
int res, retry;
|
|
struct sas_task *task = NULL;
|
|
struct sas_internal *i =
|
|
to_sas_internal(dev->port->ha->core.shost->transportt);
|
|
|
|
for (retry = 0; retry < 3; retry++) {
|
|
task = sas_alloc_task(GFP_KERNEL);
|
|
if (!task)
|
|
return -ENOMEM;
|
|
|
|
task->dev = dev;
|
|
task->task_proto = dev->tproto;
|
|
sg_init_one(&task->smp_task.smp_req, req, req_size);
|
|
sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
|
|
|
|
task->task_done = smp_task_done;
|
|
|
|
task->timer.data = (unsigned long) task;
|
|
task->timer.function = smp_task_timedout;
|
|
task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
|
|
add_timer(&task->timer);
|
|
|
|
res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
|
|
|
|
if (res) {
|
|
del_timer(&task->timer);
|
|
SAS_DPRINTK("executing SMP task failed:%d\n", res);
|
|
goto ex_err;
|
|
}
|
|
|
|
wait_for_completion(&task->completion);
|
|
res = -ETASK;
|
|
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
|
|
SAS_DPRINTK("smp task timed out or aborted\n");
|
|
i->dft->lldd_abort_task(task);
|
|
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
|
|
SAS_DPRINTK("SMP task aborted and not done\n");
|
|
goto ex_err;
|
|
}
|
|
}
|
|
if (task->task_status.resp == SAS_TASK_COMPLETE &&
|
|
task->task_status.stat == SAM_GOOD) {
|
|
res = 0;
|
|
break;
|
|
} else {
|
|
SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
|
|
"status 0x%x\n", __FUNCTION__,
|
|
SAS_ADDR(dev->sas_addr),
|
|
task->task_status.resp,
|
|
task->task_status.stat);
|
|
sas_free_task(task);
|
|
task = NULL;
|
|
}
|
|
}
|
|
ex_err:
|
|
BUG_ON(retry == 3 && task != NULL);
|
|
if (task != NULL) {
|
|
sas_free_task(task);
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/* ---------- Allocations ---------- */
|
|
|
|
static inline void *alloc_smp_req(int size)
|
|
{
|
|
u8 *p = kzalloc(size, GFP_KERNEL);
|
|
if (p)
|
|
p[0] = SMP_REQUEST;
|
|
return p;
|
|
}
|
|
|
|
static inline void *alloc_smp_resp(int size)
|
|
{
|
|
return kzalloc(size, GFP_KERNEL);
|
|
}
|
|
|
|
/* ---------- Expander configuration ---------- */
|
|
|
|
static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
|
|
void *disc_resp)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct ex_phy *phy = &ex->ex_phy[phy_id];
|
|
struct smp_resp *resp = disc_resp;
|
|
struct discover_resp *dr = &resp->disc;
|
|
struct sas_rphy *rphy = dev->rphy;
|
|
int rediscover = (phy->phy != NULL);
|
|
|
|
if (!rediscover) {
|
|
phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
|
|
|
|
/* FIXME: error_handling */
|
|
BUG_ON(!phy->phy);
|
|
}
|
|
|
|
switch (resp->result) {
|
|
case SMP_RESP_PHY_VACANT:
|
|
phy->phy_state = PHY_VACANT;
|
|
return;
|
|
default:
|
|
phy->phy_state = PHY_NOT_PRESENT;
|
|
return;
|
|
case SMP_RESP_FUNC_ACC:
|
|
phy->phy_state = PHY_EMPTY; /* do not know yet */
|
|
break;
|
|
}
|
|
|
|
phy->phy_id = phy_id;
|
|
phy->attached_dev_type = dr->attached_dev_type;
|
|
phy->linkrate = dr->linkrate;
|
|
phy->attached_sata_host = dr->attached_sata_host;
|
|
phy->attached_sata_dev = dr->attached_sata_dev;
|
|
phy->attached_sata_ps = dr->attached_sata_ps;
|
|
phy->attached_iproto = dr->iproto << 1;
|
|
phy->attached_tproto = dr->tproto << 1;
|
|
memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
|
|
phy->attached_phy_id = dr->attached_phy_id;
|
|
phy->phy_change_count = dr->change_count;
|
|
phy->routing_attr = dr->routing_attr;
|
|
phy->virtual = dr->virtual;
|
|
phy->last_da_index = -1;
|
|
|
|
phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
|
|
phy->phy->identify.target_port_protocols = phy->attached_tproto;
|
|
phy->phy->identify.phy_identifier = phy_id;
|
|
phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
|
|
phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
|
|
phy->phy->minimum_linkrate = dr->pmin_linkrate;
|
|
phy->phy->maximum_linkrate = dr->pmax_linkrate;
|
|
phy->phy->negotiated_linkrate = phy->linkrate;
|
|
|
|
if (!rediscover)
|
|
sas_phy_add(phy->phy);
|
|
|
|
SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
|
|
SAS_ADDR(dev->sas_addr), phy->phy_id,
|
|
phy->routing_attr == TABLE_ROUTING ? 'T' :
|
|
phy->routing_attr == DIRECT_ROUTING ? 'D' :
|
|
phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
|
|
SAS_ADDR(phy->attached_sas_addr));
|
|
|
|
return;
|
|
}
|
|
|
|
#define DISCOVER_REQ_SIZE 16
|
|
#define DISCOVER_RESP_SIZE 56
|
|
|
|
static int sas_ex_phy_discover(struct domain_device *dev, int single)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int res = 0;
|
|
u8 *disc_req;
|
|
u8 *disc_resp;
|
|
|
|
disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
|
|
if (!disc_req)
|
|
return -ENOMEM;
|
|
|
|
disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE);
|
|
if (!disc_resp) {
|
|
kfree(disc_req);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
disc_req[1] = SMP_DISCOVER;
|
|
|
|
if (0 <= single && single < ex->num_phys) {
|
|
disc_req[9] = single;
|
|
res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
|
|
disc_resp, DISCOVER_RESP_SIZE);
|
|
if (res)
|
|
goto out_err;
|
|
sas_set_ex_phy(dev, single, disc_resp);
|
|
} else {
|
|
int i;
|
|
|
|
for (i = 0; i < ex->num_phys; i++) {
|
|
disc_req[9] = i;
|
|
res = smp_execute_task(dev, disc_req,
|
|
DISCOVER_REQ_SIZE, disc_resp,
|
|
DISCOVER_RESP_SIZE);
|
|
if (res)
|
|
goto out_err;
|
|
sas_set_ex_phy(dev, i, disc_resp);
|
|
}
|
|
}
|
|
out_err:
|
|
kfree(disc_resp);
|
|
kfree(disc_req);
|
|
return res;
|
|
}
|
|
|
|
static int sas_expander_discover(struct domain_device *dev)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int res = -ENOMEM;
|
|
|
|
ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL);
|
|
if (!ex->ex_phy)
|
|
return -ENOMEM;
|
|
|
|
res = sas_ex_phy_discover(dev, -1);
|
|
if (res)
|
|
goto out_err;
|
|
|
|
return 0;
|
|
out_err:
|
|
kfree(ex->ex_phy);
|
|
ex->ex_phy = NULL;
|
|
return res;
|
|
}
|
|
|
|
#define MAX_EXPANDER_PHYS 128
|
|
|
|
static void ex_assign_report_general(struct domain_device *dev,
|
|
struct smp_resp *resp)
|
|
{
|
|
struct report_general_resp *rg = &resp->rg;
|
|
|
|
dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
|
|
dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
|
|
dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
|
|
dev->ex_dev.conf_route_table = rg->conf_route_table;
|
|
dev->ex_dev.configuring = rg->configuring;
|
|
memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
|
|
}
|
|
|
|
#define RG_REQ_SIZE 8
|
|
#define RG_RESP_SIZE 32
|
|
|
|
static int sas_ex_general(struct domain_device *dev)
|
|
{
|
|
u8 *rg_req;
|
|
struct smp_resp *rg_resp;
|
|
int res;
|
|
int i;
|
|
|
|
rg_req = alloc_smp_req(RG_REQ_SIZE);
|
|
if (!rg_req)
|
|
return -ENOMEM;
|
|
|
|
rg_resp = alloc_smp_resp(RG_RESP_SIZE);
|
|
if (!rg_resp) {
|
|
kfree(rg_req);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rg_req[1] = SMP_REPORT_GENERAL;
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
|
|
RG_RESP_SIZE);
|
|
|
|
if (res) {
|
|
SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
|
|
SAS_ADDR(dev->sas_addr), res);
|
|
goto out;
|
|
} else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
|
|
SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
|
|
SAS_ADDR(dev->sas_addr), rg_resp->result);
|
|
res = rg_resp->result;
|
|
goto out;
|
|
}
|
|
|
|
ex_assign_report_general(dev, rg_resp);
|
|
|
|
if (dev->ex_dev.configuring) {
|
|
SAS_DPRINTK("RG: ex %llx self-configuring...\n",
|
|
SAS_ADDR(dev->sas_addr));
|
|
schedule_timeout_interruptible(5*HZ);
|
|
} else
|
|
break;
|
|
}
|
|
out:
|
|
kfree(rg_req);
|
|
kfree(rg_resp);
|
|
return res;
|
|
}
|
|
|
|
static void ex_assign_manuf_info(struct domain_device *dev, void
|
|
*_mi_resp)
|
|
{
|
|
u8 *mi_resp = _mi_resp;
|
|
struct sas_rphy *rphy = dev->rphy;
|
|
struct sas_expander_device *edev = rphy_to_expander_device(rphy);
|
|
|
|
memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
|
|
memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
|
|
memcpy(edev->product_rev, mi_resp + 36,
|
|
SAS_EXPANDER_PRODUCT_REV_LEN);
|
|
|
|
if (mi_resp[8] & 1) {
|
|
memcpy(edev->component_vendor_id, mi_resp + 40,
|
|
SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
|
|
edev->component_id = mi_resp[48] << 8 | mi_resp[49];
|
|
edev->component_revision_id = mi_resp[50];
|
|
}
|
|
}
|
|
|
|
#define MI_REQ_SIZE 8
|
|
#define MI_RESP_SIZE 64
|
|
|
|
static int sas_ex_manuf_info(struct domain_device *dev)
|
|
{
|
|
u8 *mi_req;
|
|
u8 *mi_resp;
|
|
int res;
|
|
|
|
mi_req = alloc_smp_req(MI_REQ_SIZE);
|
|
if (!mi_req)
|
|
return -ENOMEM;
|
|
|
|
mi_resp = alloc_smp_resp(MI_RESP_SIZE);
|
|
if (!mi_resp) {
|
|
kfree(mi_req);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mi_req[1] = SMP_REPORT_MANUF_INFO;
|
|
|
|
res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
|
|
if (res) {
|
|
SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
|
|
SAS_ADDR(dev->sas_addr), res);
|
|
goto out;
|
|
} else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
|
|
SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
|
|
SAS_ADDR(dev->sas_addr), mi_resp[2]);
|
|
goto out;
|
|
}
|
|
|
|
ex_assign_manuf_info(dev, mi_resp);
|
|
out:
|
|
kfree(mi_req);
|
|
kfree(mi_resp);
|
|
return res;
|
|
}
|
|
|
|
#define PC_REQ_SIZE 44
|
|
#define PC_RESP_SIZE 8
|
|
|
|
int sas_smp_phy_control(struct domain_device *dev, int phy_id,
|
|
enum phy_func phy_func,
|
|
struct sas_phy_linkrates *rates)
|
|
{
|
|
u8 *pc_req;
|
|
u8 *pc_resp;
|
|
int res;
|
|
|
|
pc_req = alloc_smp_req(PC_REQ_SIZE);
|
|
if (!pc_req)
|
|
return -ENOMEM;
|
|
|
|
pc_resp = alloc_smp_resp(PC_RESP_SIZE);
|
|
if (!pc_resp) {
|
|
kfree(pc_req);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pc_req[1] = SMP_PHY_CONTROL;
|
|
pc_req[9] = phy_id;
|
|
pc_req[10]= phy_func;
|
|
if (rates) {
|
|
pc_req[32] = rates->minimum_linkrate << 4;
|
|
pc_req[33] = rates->maximum_linkrate << 4;
|
|
}
|
|
|
|
res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
|
|
|
|
kfree(pc_resp);
|
|
kfree(pc_req);
|
|
return res;
|
|
}
|
|
|
|
static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct ex_phy *phy = &ex->ex_phy[phy_id];
|
|
|
|
sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
|
|
phy->linkrate = SAS_PHY_DISABLED;
|
|
}
|
|
|
|
static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int i;
|
|
|
|
for (i = 0; i < ex->num_phys; i++) {
|
|
struct ex_phy *phy = &ex->ex_phy[i];
|
|
|
|
if (phy->phy_state == PHY_VACANT ||
|
|
phy->phy_state == PHY_NOT_PRESENT)
|
|
continue;
|
|
|
|
if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
|
|
sas_ex_disable_phy(dev, i);
|
|
}
|
|
}
|
|
|
|
static int sas_dev_present_in_domain(struct asd_sas_port *port,
|
|
u8 *sas_addr)
|
|
{
|
|
struct domain_device *dev;
|
|
|
|
if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
|
|
return 1;
|
|
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
|
|
if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define RPEL_REQ_SIZE 16
|
|
#define RPEL_RESP_SIZE 32
|
|
int sas_smp_get_phy_events(struct sas_phy *phy)
|
|
{
|
|
int res;
|
|
struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
|
|
struct domain_device *dev = sas_find_dev_by_rphy(rphy);
|
|
u8 *req = alloc_smp_req(RPEL_REQ_SIZE);
|
|
u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL);
|
|
|
|
if (!resp)
|
|
return -ENOMEM;
|
|
|
|
req[1] = SMP_REPORT_PHY_ERR_LOG;
|
|
req[9] = phy->number;
|
|
|
|
res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
|
|
resp, RPEL_RESP_SIZE);
|
|
|
|
if (!res)
|
|
goto out;
|
|
|
|
phy->invalid_dword_count = scsi_to_u32(&resp[12]);
|
|
phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
|
|
phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
|
|
phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
|
|
|
|
out:
|
|
kfree(resp);
|
|
return res;
|
|
|
|
}
|
|
|
|
#define RPS_REQ_SIZE 16
|
|
#define RPS_RESP_SIZE 60
|
|
|
|
static int sas_get_report_phy_sata(struct domain_device *dev,
|
|
int phy_id,
|
|
struct smp_resp *rps_resp)
|
|
{
|
|
int res;
|
|
u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
|
|
|
|
if (!rps_req)
|
|
return -ENOMEM;
|
|
|
|
rps_req[1] = SMP_REPORT_PHY_SATA;
|
|
rps_req[9] = phy_id;
|
|
|
|
res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
|
|
rps_resp, RPS_RESP_SIZE);
|
|
|
|
kfree(rps_req);
|
|
return 0;
|
|
}
|
|
|
|
static void sas_ex_get_linkrate(struct domain_device *parent,
|
|
struct domain_device *child,
|
|
struct ex_phy *parent_phy)
|
|
{
|
|
struct expander_device *parent_ex = &parent->ex_dev;
|
|
struct sas_port *port;
|
|
int i;
|
|
|
|
child->pathways = 0;
|
|
|
|
port = parent_phy->port;
|
|
|
|
for (i = 0; i < parent_ex->num_phys; i++) {
|
|
struct ex_phy *phy = &parent_ex->ex_phy[i];
|
|
|
|
if (phy->phy_state == PHY_VACANT ||
|
|
phy->phy_state == PHY_NOT_PRESENT)
|
|
continue;
|
|
|
|
if (SAS_ADDR(phy->attached_sas_addr) ==
|
|
SAS_ADDR(child->sas_addr)) {
|
|
|
|
child->min_linkrate = min(parent->min_linkrate,
|
|
phy->linkrate);
|
|
child->max_linkrate = max(parent->max_linkrate,
|
|
phy->linkrate);
|
|
child->pathways++;
|
|
sas_port_add_phy(port, phy->phy);
|
|
}
|
|
}
|
|
child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
|
|
child->pathways = min(child->pathways, parent->pathways);
|
|
}
|
|
|
|
static struct domain_device *sas_ex_discover_end_dev(
|
|
struct domain_device *parent, int phy_id)
|
|
{
|
|
struct expander_device *parent_ex = &parent->ex_dev;
|
|
struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
|
|
struct domain_device *child = NULL;
|
|
struct sas_rphy *rphy;
|
|
int res;
|
|
|
|
if (phy->attached_sata_host || phy->attached_sata_ps)
|
|
return NULL;
|
|
|
|
child = kzalloc(sizeof(*child), GFP_KERNEL);
|
|
if (!child)
|
|
return NULL;
|
|
|
|
child->parent = parent;
|
|
child->port = parent->port;
|
|
child->iproto = phy->attached_iproto;
|
|
memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
|
|
sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
|
|
phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
|
|
BUG_ON(!phy->port);
|
|
/* FIXME: better error handling*/
|
|
BUG_ON(sas_port_add(phy->port) != 0);
|
|
sas_ex_get_linkrate(parent, child, phy);
|
|
|
|
if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) {
|
|
child->dev_type = SATA_DEV;
|
|
if (phy->attached_tproto & SAS_PROTO_STP)
|
|
child->tproto = phy->attached_tproto;
|
|
if (phy->attached_sata_dev)
|
|
child->tproto |= SATA_DEV;
|
|
res = sas_get_report_phy_sata(parent, phy_id,
|
|
&child->sata_dev.rps_resp);
|
|
if (res) {
|
|
SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
|
|
"0x%x\n", SAS_ADDR(parent->sas_addr),
|
|
phy_id, res);
|
|
kfree(child);
|
|
return NULL;
|
|
}
|
|
memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
|
|
sizeof(struct dev_to_host_fis));
|
|
sas_init_dev(child);
|
|
res = sas_discover_sata(child);
|
|
if (res) {
|
|
SAS_DPRINTK("sas_discover_sata() for device %16llx at "
|
|
"%016llx:0x%x returned 0x%x\n",
|
|
SAS_ADDR(child->sas_addr),
|
|
SAS_ADDR(parent->sas_addr), phy_id, res);
|
|
kfree(child);
|
|
return NULL;
|
|
}
|
|
} else if (phy->attached_tproto & SAS_PROTO_SSP) {
|
|
child->dev_type = SAS_END_DEV;
|
|
rphy = sas_end_device_alloc(phy->port);
|
|
/* FIXME: error handling */
|
|
BUG_ON(!rphy);
|
|
child->tproto = phy->attached_tproto;
|
|
sas_init_dev(child);
|
|
|
|
child->rphy = rphy;
|
|
sas_fill_in_rphy(child, rphy);
|
|
|
|
spin_lock(&parent->port->dev_list_lock);
|
|
list_add_tail(&child->dev_list_node, &parent->port->dev_list);
|
|
spin_unlock(&parent->port->dev_list_lock);
|
|
|
|
res = sas_discover_end_dev(child);
|
|
if (res) {
|
|
SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
|
|
"at %016llx:0x%x returned 0x%x\n",
|
|
SAS_ADDR(child->sas_addr),
|
|
SAS_ADDR(parent->sas_addr), phy_id, res);
|
|
/* FIXME: this kfrees list elements without removing them */
|
|
//kfree(child);
|
|
return NULL;
|
|
}
|
|
} else {
|
|
SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
|
|
phy->attached_tproto, SAS_ADDR(parent->sas_addr),
|
|
phy_id);
|
|
}
|
|
|
|
list_add_tail(&child->siblings, &parent_ex->children);
|
|
return child;
|
|
}
|
|
|
|
static struct domain_device *sas_ex_discover_expander(
|
|
struct domain_device *parent, int phy_id)
|
|
{
|
|
struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
|
|
struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
|
|
struct domain_device *child = NULL;
|
|
struct sas_rphy *rphy;
|
|
struct sas_expander_device *edev;
|
|
struct asd_sas_port *port;
|
|
int res;
|
|
|
|
if (phy->routing_attr == DIRECT_ROUTING) {
|
|
SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
|
|
"allowed\n",
|
|
SAS_ADDR(parent->sas_addr), phy_id,
|
|
SAS_ADDR(phy->attached_sas_addr),
|
|
phy->attached_phy_id);
|
|
return NULL;
|
|
}
|
|
child = kzalloc(sizeof(*child), GFP_KERNEL);
|
|
if (!child)
|
|
return NULL;
|
|
|
|
phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
|
|
/* FIXME: better error handling */
|
|
BUG_ON(sas_port_add(phy->port) != 0);
|
|
|
|
|
|
switch (phy->attached_dev_type) {
|
|
case EDGE_DEV:
|
|
rphy = sas_expander_alloc(phy->port,
|
|
SAS_EDGE_EXPANDER_DEVICE);
|
|
break;
|
|
case FANOUT_DEV:
|
|
rphy = sas_expander_alloc(phy->port,
|
|
SAS_FANOUT_EXPANDER_DEVICE);
|
|
break;
|
|
default:
|
|
rphy = NULL; /* shut gcc up */
|
|
BUG();
|
|
}
|
|
port = parent->port;
|
|
child->rphy = rphy;
|
|
edev = rphy_to_expander_device(rphy);
|
|
child->dev_type = phy->attached_dev_type;
|
|
child->parent = parent;
|
|
child->port = port;
|
|
child->iproto = phy->attached_iproto;
|
|
child->tproto = phy->attached_tproto;
|
|
memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
|
|
sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
|
|
sas_ex_get_linkrate(parent, child, phy);
|
|
edev->level = parent_ex->level + 1;
|
|
parent->port->disc.max_level = max(parent->port->disc.max_level,
|
|
edev->level);
|
|
sas_init_dev(child);
|
|
sas_fill_in_rphy(child, rphy);
|
|
sas_rphy_add(rphy);
|
|
|
|
spin_lock(&parent->port->dev_list_lock);
|
|
list_add_tail(&child->dev_list_node, &parent->port->dev_list);
|
|
spin_unlock(&parent->port->dev_list_lock);
|
|
|
|
res = sas_discover_expander(child);
|
|
if (res) {
|
|
kfree(child);
|
|
return NULL;
|
|
}
|
|
list_add_tail(&child->siblings, &parent->ex_dev.children);
|
|
return child;
|
|
}
|
|
|
|
static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
|
|
struct domain_device *child = NULL;
|
|
int res = 0;
|
|
|
|
/* Phy state */
|
|
if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
|
|
if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
|
|
res = sas_ex_phy_discover(dev, phy_id);
|
|
if (res)
|
|
return res;
|
|
}
|
|
|
|
/* Parent and domain coherency */
|
|
if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
|
|
SAS_ADDR(dev->port->sas_addr))) {
|
|
sas_add_parent_port(dev, phy_id);
|
|
return 0;
|
|
}
|
|
if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
|
|
SAS_ADDR(dev->parent->sas_addr))) {
|
|
sas_add_parent_port(dev, phy_id);
|
|
if (ex_phy->routing_attr == TABLE_ROUTING)
|
|
sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
|
|
return 0;
|
|
}
|
|
|
|
if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
|
|
sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
|
|
|
|
if (ex_phy->attached_dev_type == NO_DEVICE) {
|
|
if (ex_phy->routing_attr == DIRECT_ROUTING) {
|
|
memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
|
|
sas_configure_routing(dev, ex_phy->attached_sas_addr);
|
|
}
|
|
return 0;
|
|
} else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
|
|
return 0;
|
|
|
|
if (ex_phy->attached_dev_type != SAS_END_DEV &&
|
|
ex_phy->attached_dev_type != FANOUT_DEV &&
|
|
ex_phy->attached_dev_type != EDGE_DEV) {
|
|
SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
|
|
"phy 0x%x\n", ex_phy->attached_dev_type,
|
|
SAS_ADDR(dev->sas_addr),
|
|
phy_id);
|
|
return 0;
|
|
}
|
|
|
|
res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
|
|
if (res) {
|
|
SAS_DPRINTK("configure routing for dev %016llx "
|
|
"reported 0x%x. Forgotten\n",
|
|
SAS_ADDR(ex_phy->attached_sas_addr), res);
|
|
sas_disable_routing(dev, ex_phy->attached_sas_addr);
|
|
return res;
|
|
}
|
|
|
|
switch (ex_phy->attached_dev_type) {
|
|
case SAS_END_DEV:
|
|
child = sas_ex_discover_end_dev(dev, phy_id);
|
|
break;
|
|
case FANOUT_DEV:
|
|
if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
|
|
SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
|
|
"attached to ex %016llx phy 0x%x\n",
|
|
SAS_ADDR(ex_phy->attached_sas_addr),
|
|
ex_phy->attached_phy_id,
|
|
SAS_ADDR(dev->sas_addr),
|
|
phy_id);
|
|
sas_ex_disable_phy(dev, phy_id);
|
|
break;
|
|
} else
|
|
memcpy(dev->port->disc.fanout_sas_addr,
|
|
ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
|
|
/* fallthrough */
|
|
case EDGE_DEV:
|
|
child = sas_ex_discover_expander(dev, phy_id);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (child) {
|
|
int i;
|
|
|
|
for (i = 0; i < ex->num_phys; i++) {
|
|
if (ex->ex_phy[i].phy_state == PHY_VACANT ||
|
|
ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
|
|
continue;
|
|
|
|
if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
|
|
SAS_ADDR(child->sas_addr))
|
|
ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
|
|
}
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int i;
|
|
|
|
for (i = 0; i < ex->num_phys; i++) {
|
|
struct ex_phy *phy = &ex->ex_phy[i];
|
|
|
|
if (phy->phy_state == PHY_VACANT ||
|
|
phy->phy_state == PHY_NOT_PRESENT)
|
|
continue;
|
|
|
|
if ((phy->attached_dev_type == EDGE_DEV ||
|
|
phy->attached_dev_type == FANOUT_DEV) &&
|
|
phy->routing_attr == SUBTRACTIVE_ROUTING) {
|
|
|
|
memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
|
|
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sas_check_level_subtractive_boundary(struct domain_device *dev)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct domain_device *child;
|
|
u8 sub_addr[8] = {0, };
|
|
|
|
list_for_each_entry(child, &ex->children, siblings) {
|
|
if (child->dev_type != EDGE_DEV &&
|
|
child->dev_type != FANOUT_DEV)
|
|
continue;
|
|
if (sub_addr[0] == 0) {
|
|
sas_find_sub_addr(child, sub_addr);
|
|
continue;
|
|
} else {
|
|
u8 s2[8];
|
|
|
|
if (sas_find_sub_addr(child, s2) &&
|
|
(SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
|
|
|
|
SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
|
|
"diverges from subtractive "
|
|
"boundary %016llx\n",
|
|
SAS_ADDR(dev->sas_addr),
|
|
SAS_ADDR(child->sas_addr),
|
|
SAS_ADDR(s2),
|
|
SAS_ADDR(sub_addr));
|
|
|
|
sas_ex_disable_port(child, s2);
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
/**
|
|
* sas_ex_discover_devices -- discover devices attached to this expander
|
|
* dev: pointer to the expander domain device
|
|
* single: if you want to do a single phy, else set to -1;
|
|
*
|
|
* Configure this expander for use with its devices and register the
|
|
* devices of this expander.
|
|
*/
|
|
static int sas_ex_discover_devices(struct domain_device *dev, int single)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int i = 0, end = ex->num_phys;
|
|
int res = 0;
|
|
|
|
if (0 <= single && single < end) {
|
|
i = single;
|
|
end = i+1;
|
|
}
|
|
|
|
for ( ; i < end; i++) {
|
|
struct ex_phy *ex_phy = &ex->ex_phy[i];
|
|
|
|
if (ex_phy->phy_state == PHY_VACANT ||
|
|
ex_phy->phy_state == PHY_NOT_PRESENT ||
|
|
ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
|
|
continue;
|
|
|
|
switch (ex_phy->linkrate) {
|
|
case SAS_PHY_DISABLED:
|
|
case SAS_PHY_RESET_PROBLEM:
|
|
case SAS_SATA_PORT_SELECTOR:
|
|
continue;
|
|
default:
|
|
res = sas_ex_discover_dev(dev, i);
|
|
if (res)
|
|
break;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (!res)
|
|
sas_check_level_subtractive_boundary(dev);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int i;
|
|
u8 *sub_sas_addr = NULL;
|
|
|
|
if (dev->dev_type != EDGE_DEV)
|
|
return 0;
|
|
|
|
for (i = 0; i < ex->num_phys; i++) {
|
|
struct ex_phy *phy = &ex->ex_phy[i];
|
|
|
|
if (phy->phy_state == PHY_VACANT ||
|
|
phy->phy_state == PHY_NOT_PRESENT)
|
|
continue;
|
|
|
|
if ((phy->attached_dev_type == FANOUT_DEV ||
|
|
phy->attached_dev_type == EDGE_DEV) &&
|
|
phy->routing_attr == SUBTRACTIVE_ROUTING) {
|
|
|
|
if (!sub_sas_addr)
|
|
sub_sas_addr = &phy->attached_sas_addr[0];
|
|
else if (SAS_ADDR(sub_sas_addr) !=
|
|
SAS_ADDR(phy->attached_sas_addr)) {
|
|
|
|
SAS_DPRINTK("ex %016llx phy 0x%x "
|
|
"diverges(%016llx) on subtractive "
|
|
"boundary(%016llx). Disabled\n",
|
|
SAS_ADDR(dev->sas_addr), i,
|
|
SAS_ADDR(phy->attached_sas_addr),
|
|
SAS_ADDR(sub_sas_addr));
|
|
sas_ex_disable_phy(dev, i);
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void sas_print_parent_topology_bug(struct domain_device *child,
|
|
struct ex_phy *parent_phy,
|
|
struct ex_phy *child_phy)
|
|
{
|
|
static const char ra_char[] = {
|
|
[DIRECT_ROUTING] = 'D',
|
|
[SUBTRACTIVE_ROUTING] = 'S',
|
|
[TABLE_ROUTING] = 'T',
|
|
};
|
|
static const char *ex_type[] = {
|
|
[EDGE_DEV] = "edge",
|
|
[FANOUT_DEV] = "fanout",
|
|
};
|
|
struct domain_device *parent = child->parent;
|
|
|
|
sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
|
|
"has %c:%c routing link!\n",
|
|
|
|
ex_type[parent->dev_type],
|
|
SAS_ADDR(parent->sas_addr),
|
|
parent_phy->phy_id,
|
|
|
|
ex_type[child->dev_type],
|
|
SAS_ADDR(child->sas_addr),
|
|
child_phy->phy_id,
|
|
|
|
ra_char[parent_phy->routing_attr],
|
|
ra_char[child_phy->routing_attr]);
|
|
}
|
|
|
|
static int sas_check_eeds(struct domain_device *child,
|
|
struct ex_phy *parent_phy,
|
|
struct ex_phy *child_phy)
|
|
{
|
|
int res = 0;
|
|
struct domain_device *parent = child->parent;
|
|
|
|
if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
|
|
res = -ENODEV;
|
|
SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
|
|
"phy S:0x%x, while there is a fanout ex %016llx\n",
|
|
SAS_ADDR(parent->sas_addr),
|
|
parent_phy->phy_id,
|
|
SAS_ADDR(child->sas_addr),
|
|
child_phy->phy_id,
|
|
SAS_ADDR(parent->port->disc.fanout_sas_addr));
|
|
} else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
|
|
memcpy(parent->port->disc.eeds_a, parent->sas_addr,
|
|
SAS_ADDR_SIZE);
|
|
memcpy(parent->port->disc.eeds_b, child->sas_addr,
|
|
SAS_ADDR_SIZE);
|
|
} else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
|
|
SAS_ADDR(parent->sas_addr)) ||
|
|
(SAS_ADDR(parent->port->disc.eeds_a) ==
|
|
SAS_ADDR(child->sas_addr)))
|
|
&&
|
|
((SAS_ADDR(parent->port->disc.eeds_b) ==
|
|
SAS_ADDR(parent->sas_addr)) ||
|
|
(SAS_ADDR(parent->port->disc.eeds_b) ==
|
|
SAS_ADDR(child->sas_addr))))
|
|
;
|
|
else {
|
|
res = -ENODEV;
|
|
SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
|
|
"phy 0x%x link forms a third EEDS!\n",
|
|
SAS_ADDR(parent->sas_addr),
|
|
parent_phy->phy_id,
|
|
SAS_ADDR(child->sas_addr),
|
|
child_phy->phy_id);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
/* Here we spill over 80 columns. It is intentional.
|
|
*/
|
|
static int sas_check_parent_topology(struct domain_device *child)
|
|
{
|
|
struct expander_device *child_ex = &child->ex_dev;
|
|
struct expander_device *parent_ex;
|
|
int i;
|
|
int res = 0;
|
|
|
|
if (!child->parent)
|
|
return 0;
|
|
|
|
if (child->parent->dev_type != EDGE_DEV &&
|
|
child->parent->dev_type != FANOUT_DEV)
|
|
return 0;
|
|
|
|
parent_ex = &child->parent->ex_dev;
|
|
|
|
for (i = 0; i < parent_ex->num_phys; i++) {
|
|
struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
|
|
struct ex_phy *child_phy;
|
|
|
|
if (parent_phy->phy_state == PHY_VACANT ||
|
|
parent_phy->phy_state == PHY_NOT_PRESENT)
|
|
continue;
|
|
|
|
if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
|
|
continue;
|
|
|
|
child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
|
|
|
|
switch (child->parent->dev_type) {
|
|
case EDGE_DEV:
|
|
if (child->dev_type == FANOUT_DEV) {
|
|
if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
|
|
child_phy->routing_attr != TABLE_ROUTING) {
|
|
sas_print_parent_topology_bug(child, parent_phy, child_phy);
|
|
res = -ENODEV;
|
|
}
|
|
} else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
|
|
if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
|
|
res = sas_check_eeds(child, parent_phy, child_phy);
|
|
} else if (child_phy->routing_attr != TABLE_ROUTING) {
|
|
sas_print_parent_topology_bug(child, parent_phy, child_phy);
|
|
res = -ENODEV;
|
|
}
|
|
} else if (parent_phy->routing_attr == TABLE_ROUTING &&
|
|
child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
|
|
sas_print_parent_topology_bug(child, parent_phy, child_phy);
|
|
res = -ENODEV;
|
|
}
|
|
break;
|
|
case FANOUT_DEV:
|
|
if (parent_phy->routing_attr != TABLE_ROUTING ||
|
|
child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
|
|
sas_print_parent_topology_bug(child, parent_phy, child_phy);
|
|
res = -ENODEV;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
#define RRI_REQ_SIZE 16
|
|
#define RRI_RESP_SIZE 44
|
|
|
|
static int sas_configure_present(struct domain_device *dev, int phy_id,
|
|
u8 *sas_addr, int *index, int *present)
|
|
{
|
|
int i, res = 0;
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct ex_phy *phy = &ex->ex_phy[phy_id];
|
|
u8 *rri_req;
|
|
u8 *rri_resp;
|
|
|
|
*present = 0;
|
|
*index = 0;
|
|
|
|
rri_req = alloc_smp_req(RRI_REQ_SIZE);
|
|
if (!rri_req)
|
|
return -ENOMEM;
|
|
|
|
rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
|
|
if (!rri_resp) {
|
|
kfree(rri_req);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rri_req[1] = SMP_REPORT_ROUTE_INFO;
|
|
rri_req[9] = phy_id;
|
|
|
|
for (i = 0; i < ex->max_route_indexes ; i++) {
|
|
*(__be16 *)(rri_req+6) = cpu_to_be16(i);
|
|
res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
|
|
RRI_RESP_SIZE);
|
|
if (res)
|
|
goto out;
|
|
res = rri_resp[2];
|
|
if (res == SMP_RESP_NO_INDEX) {
|
|
SAS_DPRINTK("overflow of indexes: dev %016llx "
|
|
"phy 0x%x index 0x%x\n",
|
|
SAS_ADDR(dev->sas_addr), phy_id, i);
|
|
goto out;
|
|
} else if (res != SMP_RESP_FUNC_ACC) {
|
|
SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
|
|
"result 0x%x\n", __FUNCTION__,
|
|
SAS_ADDR(dev->sas_addr), phy_id, i, res);
|
|
goto out;
|
|
}
|
|
if (SAS_ADDR(sas_addr) != 0) {
|
|
if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
|
|
*index = i;
|
|
if ((rri_resp[12] & 0x80) == 0x80)
|
|
*present = 0;
|
|
else
|
|
*present = 1;
|
|
goto out;
|
|
} else if (SAS_ADDR(rri_resp+16) == 0) {
|
|
*index = i;
|
|
*present = 0;
|
|
goto out;
|
|
}
|
|
} else if (SAS_ADDR(rri_resp+16) == 0 &&
|
|
phy->last_da_index < i) {
|
|
phy->last_da_index = i;
|
|
*index = i;
|
|
*present = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
res = -1;
|
|
out:
|
|
kfree(rri_req);
|
|
kfree(rri_resp);
|
|
return res;
|
|
}
|
|
|
|
#define CRI_REQ_SIZE 44
|
|
#define CRI_RESP_SIZE 8
|
|
|
|
static int sas_configure_set(struct domain_device *dev, int phy_id,
|
|
u8 *sas_addr, int index, int include)
|
|
{
|
|
int res;
|
|
u8 *cri_req;
|
|
u8 *cri_resp;
|
|
|
|
cri_req = alloc_smp_req(CRI_REQ_SIZE);
|
|
if (!cri_req)
|
|
return -ENOMEM;
|
|
|
|
cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
|
|
if (!cri_resp) {
|
|
kfree(cri_req);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
cri_req[1] = SMP_CONF_ROUTE_INFO;
|
|
*(__be16 *)(cri_req+6) = cpu_to_be16(index);
|
|
cri_req[9] = phy_id;
|
|
if (SAS_ADDR(sas_addr) == 0 || !include)
|
|
cri_req[12] |= 0x80;
|
|
memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
|
|
|
|
res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
|
|
CRI_RESP_SIZE);
|
|
if (res)
|
|
goto out;
|
|
res = cri_resp[2];
|
|
if (res == SMP_RESP_NO_INDEX) {
|
|
SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
|
|
"index 0x%x\n",
|
|
SAS_ADDR(dev->sas_addr), phy_id, index);
|
|
}
|
|
out:
|
|
kfree(cri_req);
|
|
kfree(cri_resp);
|
|
return res;
|
|
}
|
|
|
|
static int sas_configure_phy(struct domain_device *dev, int phy_id,
|
|
u8 *sas_addr, int include)
|
|
{
|
|
int index;
|
|
int present;
|
|
int res;
|
|
|
|
res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
|
|
if (res)
|
|
return res;
|
|
if (include ^ present)
|
|
return sas_configure_set(dev, phy_id, sas_addr, index,include);
|
|
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* sas_configure_parent -- configure routing table of parent
|
|
* parent: parent expander
|
|
* child: child expander
|
|
* sas_addr: SAS port identifier of device directly attached to child
|
|
*/
|
|
static int sas_configure_parent(struct domain_device *parent,
|
|
struct domain_device *child,
|
|
u8 *sas_addr, int include)
|
|
{
|
|
struct expander_device *ex_parent = &parent->ex_dev;
|
|
int res = 0;
|
|
int i;
|
|
|
|
if (parent->parent) {
|
|
res = sas_configure_parent(parent->parent, parent, sas_addr,
|
|
include);
|
|
if (res)
|
|
return res;
|
|
}
|
|
|
|
if (ex_parent->conf_route_table == 0) {
|
|
SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
|
|
SAS_ADDR(parent->sas_addr));
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < ex_parent->num_phys; i++) {
|
|
struct ex_phy *phy = &ex_parent->ex_phy[i];
|
|
|
|
if ((phy->routing_attr == TABLE_ROUTING) &&
|
|
(SAS_ADDR(phy->attached_sas_addr) ==
|
|
SAS_ADDR(child->sas_addr))) {
|
|
res = sas_configure_phy(parent, i, sas_addr, include);
|
|
if (res)
|
|
return res;
|
|
}
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* sas_configure_routing -- configure routing
|
|
* dev: expander device
|
|
* sas_addr: port identifier of device directly attached to the expander device
|
|
*/
|
|
static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
|
|
{
|
|
if (dev->parent)
|
|
return sas_configure_parent(dev->parent, dev, sas_addr, 1);
|
|
return 0;
|
|
}
|
|
|
|
static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr)
|
|
{
|
|
if (dev->parent)
|
|
return sas_configure_parent(dev->parent, dev, sas_addr, 0);
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
#define SMP_BIN_ATTR_NAME "smp_portal"
|
|
|
|
static void sas_ex_smp_hook(struct domain_device *dev)
|
|
{
|
|
struct expander_device *ex_dev = &dev->ex_dev;
|
|
struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr;
|
|
|
|
memset(bin_attr, 0, sizeof(*bin_attr));
|
|
|
|
bin_attr->attr.name = SMP_BIN_ATTR_NAME;
|
|
bin_attr->attr.owner = THIS_MODULE;
|
|
bin_attr->attr.mode = 0600;
|
|
|
|
bin_attr->size = 0;
|
|
bin_attr->private = NULL;
|
|
bin_attr->read = smp_portal_read;
|
|
bin_attr->write= smp_portal_write;
|
|
bin_attr->mmap = NULL;
|
|
|
|
ex_dev->smp_portal_pid = -1;
|
|
init_MUTEX(&ex_dev->smp_sema);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* sas_discover_expander -- expander discovery
|
|
* @ex: pointer to expander domain device
|
|
*
|
|
* See comment in sas_discover_sata().
|
|
*/
|
|
static int sas_discover_expander(struct domain_device *dev)
|
|
{
|
|
int res;
|
|
|
|
res = sas_notify_lldd_dev_found(dev);
|
|
if (res)
|
|
return res;
|
|
|
|
res = sas_ex_general(dev);
|
|
if (res)
|
|
goto out_err;
|
|
res = sas_ex_manuf_info(dev);
|
|
if (res)
|
|
goto out_err;
|
|
|
|
res = sas_expander_discover(dev);
|
|
if (res) {
|
|
SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
|
|
SAS_ADDR(dev->sas_addr), res);
|
|
goto out_err;
|
|
}
|
|
|
|
sas_check_ex_subtractive_boundary(dev);
|
|
res = sas_check_parent_topology(dev);
|
|
if (res)
|
|
goto out_err;
|
|
return 0;
|
|
out_err:
|
|
sas_notify_lldd_dev_gone(dev);
|
|
return res;
|
|
}
|
|
|
|
static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
|
|
{
|
|
int res = 0;
|
|
struct domain_device *dev;
|
|
|
|
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
|
|
if (dev->dev_type == EDGE_DEV ||
|
|
dev->dev_type == FANOUT_DEV) {
|
|
struct sas_expander_device *ex =
|
|
rphy_to_expander_device(dev->rphy);
|
|
|
|
if (level == ex->level)
|
|
res = sas_ex_discover_devices(dev, -1);
|
|
else if (level > 0)
|
|
res = sas_ex_discover_devices(port->port_dev, -1);
|
|
|
|
}
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static int sas_ex_bfs_disc(struct asd_sas_port *port)
|
|
{
|
|
int res;
|
|
int level;
|
|
|
|
do {
|
|
level = port->disc.max_level;
|
|
res = sas_ex_level_discovery(port, level);
|
|
mb();
|
|
} while (level < port->disc.max_level);
|
|
|
|
return res;
|
|
}
|
|
|
|
int sas_discover_root_expander(struct domain_device *dev)
|
|
{
|
|
int res;
|
|
struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
|
|
|
|
sas_rphy_add(dev->rphy);
|
|
|
|
ex->level = dev->port->disc.max_level; /* 0 */
|
|
res = sas_discover_expander(dev);
|
|
if (!res)
|
|
sas_ex_bfs_disc(dev->port);
|
|
|
|
return res;
|
|
}
|
|
|
|
/* ---------- Domain revalidation ---------- */
|
|
|
|
static int sas_get_phy_discover(struct domain_device *dev,
|
|
int phy_id, struct smp_resp *disc_resp)
|
|
{
|
|
int res;
|
|
u8 *disc_req;
|
|
|
|
disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
|
|
if (!disc_req)
|
|
return -ENOMEM;
|
|
|
|
disc_req[1] = SMP_DISCOVER;
|
|
disc_req[9] = phy_id;
|
|
|
|
res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
|
|
disc_resp, DISCOVER_RESP_SIZE);
|
|
if (res)
|
|
goto out;
|
|
else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
|
|
res = disc_resp->result;
|
|
goto out;
|
|
}
|
|
out:
|
|
kfree(disc_req);
|
|
return res;
|
|
}
|
|
|
|
static int sas_get_phy_change_count(struct domain_device *dev,
|
|
int phy_id, int *pcc)
|
|
{
|
|
int res;
|
|
struct smp_resp *disc_resp;
|
|
|
|
disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
|
|
if (!disc_resp)
|
|
return -ENOMEM;
|
|
|
|
res = sas_get_phy_discover(dev, phy_id, disc_resp);
|
|
if (!res)
|
|
*pcc = disc_resp->disc.change_count;
|
|
|
|
kfree(disc_resp);
|
|
return res;
|
|
}
|
|
|
|
static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
|
|
int phy_id, u8 *attached_sas_addr)
|
|
{
|
|
int res;
|
|
struct smp_resp *disc_resp;
|
|
struct discover_resp *dr;
|
|
|
|
disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
|
|
if (!disc_resp)
|
|
return -ENOMEM;
|
|
dr = &disc_resp->disc;
|
|
|
|
res = sas_get_phy_discover(dev, phy_id, disc_resp);
|
|
if (!res) {
|
|
memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8);
|
|
if (dr->attached_dev_type == 0)
|
|
memset(attached_sas_addr, 0, 8);
|
|
}
|
|
kfree(disc_resp);
|
|
return res;
|
|
}
|
|
|
|
static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
|
|
int from_phy)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int res = 0;
|
|
int i;
|
|
|
|
for (i = from_phy; i < ex->num_phys; i++) {
|
|
int phy_change_count = 0;
|
|
|
|
res = sas_get_phy_change_count(dev, i, &phy_change_count);
|
|
if (res)
|
|
goto out;
|
|
else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
|
|
ex->ex_phy[i].phy_change_count = phy_change_count;
|
|
*phy_id = i;
|
|
return 0;
|
|
}
|
|
}
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
|
|
{
|
|
int res;
|
|
u8 *rg_req;
|
|
struct smp_resp *rg_resp;
|
|
|
|
rg_req = alloc_smp_req(RG_REQ_SIZE);
|
|
if (!rg_req)
|
|
return -ENOMEM;
|
|
|
|
rg_resp = alloc_smp_resp(RG_RESP_SIZE);
|
|
if (!rg_resp) {
|
|
kfree(rg_req);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rg_req[1] = SMP_REPORT_GENERAL;
|
|
|
|
res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
|
|
RG_RESP_SIZE);
|
|
if (res)
|
|
goto out;
|
|
if (rg_resp->result != SMP_RESP_FUNC_ACC) {
|
|
res = rg_resp->result;
|
|
goto out;
|
|
}
|
|
|
|
*ecc = be16_to_cpu(rg_resp->rg.change_count);
|
|
out:
|
|
kfree(rg_resp);
|
|
kfree(rg_req);
|
|
return res;
|
|
}
|
|
|
|
static int sas_find_bcast_dev(struct domain_device *dev,
|
|
struct domain_device **src_dev)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int ex_change_count = -1;
|
|
int res;
|
|
|
|
res = sas_get_ex_change_count(dev, &ex_change_count);
|
|
if (res)
|
|
goto out;
|
|
if (ex_change_count != -1 &&
|
|
ex_change_count != ex->ex_change_count) {
|
|
*src_dev = dev;
|
|
ex->ex_change_count = ex_change_count;
|
|
} else {
|
|
struct domain_device *ch;
|
|
|
|
list_for_each_entry(ch, &ex->children, siblings) {
|
|
if (ch->dev_type == EDGE_DEV ||
|
|
ch->dev_type == FANOUT_DEV) {
|
|
res = sas_find_bcast_dev(ch, src_dev);
|
|
if (src_dev)
|
|
return res;
|
|
}
|
|
}
|
|
}
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static void sas_unregister_ex_tree(struct domain_device *dev)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct domain_device *child, *n;
|
|
|
|
list_for_each_entry_safe(child, n, &ex->children, siblings) {
|
|
if (child->dev_type == EDGE_DEV ||
|
|
child->dev_type == FANOUT_DEV)
|
|
sas_unregister_ex_tree(child);
|
|
else
|
|
sas_unregister_dev(child);
|
|
}
|
|
sas_unregister_dev(dev);
|
|
}
|
|
|
|
static void sas_unregister_devs_sas_addr(struct domain_device *parent,
|
|
int phy_id)
|
|
{
|
|
struct expander_device *ex_dev = &parent->ex_dev;
|
|
struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
|
|
struct domain_device *child, *n;
|
|
|
|
list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
|
|
if (SAS_ADDR(child->sas_addr) ==
|
|
SAS_ADDR(phy->attached_sas_addr)) {
|
|
if (child->dev_type == EDGE_DEV ||
|
|
child->dev_type == FANOUT_DEV)
|
|
sas_unregister_ex_tree(child);
|
|
else
|
|
sas_unregister_dev(child);
|
|
break;
|
|
}
|
|
}
|
|
sas_disable_routing(parent, phy->attached_sas_addr);
|
|
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
|
|
sas_port_delete_phy(phy->port, phy->phy);
|
|
if (phy->port->num_phys == 0)
|
|
sas_port_delete(phy->port);
|
|
phy->port = NULL;
|
|
}
|
|
|
|
static int sas_discover_bfs_by_root_level(struct domain_device *root,
|
|
const int level)
|
|
{
|
|
struct expander_device *ex_root = &root->ex_dev;
|
|
struct domain_device *child;
|
|
int res = 0;
|
|
|
|
list_for_each_entry(child, &ex_root->children, siblings) {
|
|
if (child->dev_type == EDGE_DEV ||
|
|
child->dev_type == FANOUT_DEV) {
|
|
struct sas_expander_device *ex =
|
|
rphy_to_expander_device(child->rphy);
|
|
|
|
if (level > ex->level)
|
|
res = sas_discover_bfs_by_root_level(child,
|
|
level);
|
|
else if (level == ex->level)
|
|
res = sas_ex_discover_devices(child, -1);
|
|
}
|
|
}
|
|
return res;
|
|
}
|
|
|
|
static int sas_discover_bfs_by_root(struct domain_device *dev)
|
|
{
|
|
int res;
|
|
struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
|
|
int level = ex->level+1;
|
|
|
|
res = sas_ex_discover_devices(dev, -1);
|
|
if (res)
|
|
goto out;
|
|
do {
|
|
res = sas_discover_bfs_by_root_level(dev, level);
|
|
mb();
|
|
level += 1;
|
|
} while (level <= dev->port->disc.max_level);
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static int sas_discover_new(struct domain_device *dev, int phy_id)
|
|
{
|
|
struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
|
|
struct domain_device *child;
|
|
int res;
|
|
|
|
SAS_DPRINTK("ex %016llx phy%d new device attached\n",
|
|
SAS_ADDR(dev->sas_addr), phy_id);
|
|
res = sas_ex_phy_discover(dev, phy_id);
|
|
if (res)
|
|
goto out;
|
|
res = sas_ex_discover_devices(dev, phy_id);
|
|
if (res)
|
|
goto out;
|
|
list_for_each_entry(child, &dev->ex_dev.children, siblings) {
|
|
if (SAS_ADDR(child->sas_addr) ==
|
|
SAS_ADDR(ex_phy->attached_sas_addr)) {
|
|
if (child->dev_type == EDGE_DEV ||
|
|
child->dev_type == FANOUT_DEV)
|
|
res = sas_discover_bfs_by_root(child);
|
|
break;
|
|
}
|
|
}
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct ex_phy *phy = &ex->ex_phy[phy_id];
|
|
u8 attached_sas_addr[8];
|
|
int res;
|
|
|
|
res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr);
|
|
switch (res) {
|
|
case SMP_RESP_NO_PHY:
|
|
phy->phy_state = PHY_NOT_PRESENT;
|
|
sas_unregister_devs_sas_addr(dev, phy_id);
|
|
goto out; break;
|
|
case SMP_RESP_PHY_VACANT:
|
|
phy->phy_state = PHY_VACANT;
|
|
sas_unregister_devs_sas_addr(dev, phy_id);
|
|
goto out; break;
|
|
case SMP_RESP_FUNC_ACC:
|
|
break;
|
|
}
|
|
|
|
if (SAS_ADDR(attached_sas_addr) == 0) {
|
|
phy->phy_state = PHY_EMPTY;
|
|
sas_unregister_devs_sas_addr(dev, phy_id);
|
|
} else if (SAS_ADDR(attached_sas_addr) ==
|
|
SAS_ADDR(phy->attached_sas_addr)) {
|
|
SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
|
|
SAS_ADDR(dev->sas_addr), phy_id);
|
|
sas_ex_phy_discover(dev, phy_id);
|
|
} else
|
|
res = sas_discover_new(dev, phy_id);
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
static int sas_rediscover(struct domain_device *dev, const int phy_id)
|
|
{
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
|
|
int res = 0;
|
|
int i;
|
|
|
|
SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
|
|
SAS_ADDR(dev->sas_addr), phy_id);
|
|
|
|
if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
|
|
for (i = 0; i < ex->num_phys; i++) {
|
|
struct ex_phy *phy = &ex->ex_phy[i];
|
|
|
|
if (i == phy_id)
|
|
continue;
|
|
if (SAS_ADDR(phy->attached_sas_addr) ==
|
|
SAS_ADDR(changed_phy->attached_sas_addr)) {
|
|
SAS_DPRINTK("phy%d part of wide port with "
|
|
"phy%d\n", phy_id, i);
|
|
goto out;
|
|
}
|
|
}
|
|
res = sas_rediscover_dev(dev, phy_id);
|
|
} else
|
|
res = sas_discover_new(dev, phy_id);
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* sas_revalidate_domain -- revalidate the domain
|
|
* @port: port to the domain of interest
|
|
*
|
|
* NOTE: this process _must_ quit (return) as soon as any connection
|
|
* errors are encountered. Connection recovery is done elsewhere.
|
|
* Discover process only interrogates devices in order to discover the
|
|
* domain.
|
|
*/
|
|
int sas_ex_revalidate_domain(struct domain_device *port_dev)
|
|
{
|
|
int res;
|
|
struct domain_device *dev = NULL;
|
|
|
|
res = sas_find_bcast_dev(port_dev, &dev);
|
|
if (res)
|
|
goto out;
|
|
if (dev) {
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
int i = 0, phy_id;
|
|
|
|
do {
|
|
phy_id = -1;
|
|
res = sas_find_bcast_phy(dev, &phy_id, i);
|
|
if (phy_id == -1)
|
|
break;
|
|
res = sas_rediscover(dev, phy_id);
|
|
i = phy_id + 1;
|
|
} while (i < ex->num_phys);
|
|
}
|
|
out:
|
|
return res;
|
|
}
|
|
|
|
#if 0
|
|
/* ---------- SMP portal ---------- */
|
|
|
|
static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
|
|
size_t size)
|
|
{
|
|
struct domain_device *dev = to_dom_device(kobj);
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
|
|
if (offs != 0)
|
|
return -EFBIG;
|
|
else if (size == 0)
|
|
return 0;
|
|
|
|
down_interruptible(&ex->smp_sema);
|
|
if (ex->smp_req)
|
|
kfree(ex->smp_req);
|
|
ex->smp_req = kzalloc(size, GFP_USER);
|
|
if (!ex->smp_req) {
|
|
up(&ex->smp_sema);
|
|
return -ENOMEM;
|
|
}
|
|
memcpy(ex->smp_req, buf, size);
|
|
ex->smp_req_size = size;
|
|
ex->smp_portal_pid = current->pid;
|
|
up(&ex->smp_sema);
|
|
|
|
return size;
|
|
}
|
|
|
|
static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs,
|
|
size_t size)
|
|
{
|
|
struct domain_device *dev = to_dom_device(kobj);
|
|
struct expander_device *ex = &dev->ex_dev;
|
|
u8 *smp_resp;
|
|
int res = -EINVAL;
|
|
|
|
/* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact
|
|
* it should be 0.
|
|
*/
|
|
|
|
down_interruptible(&ex->smp_sema);
|
|
if (!ex->smp_req || ex->smp_portal_pid != current->pid)
|
|
goto out;
|
|
|
|
res = 0;
|
|
if (size == 0)
|
|
goto out;
|
|
|
|
res = -ENOMEM;
|
|
smp_resp = alloc_smp_resp(size);
|
|
if (!smp_resp)
|
|
goto out;
|
|
res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size,
|
|
smp_resp, size);
|
|
if (!res) {
|
|
memcpy(buf, smp_resp, size);
|
|
res = size;
|
|
}
|
|
|
|
kfree(smp_resp);
|
|
out:
|
|
kfree(ex->smp_req);
|
|
ex->smp_req = NULL;
|
|
ex->smp_req_size = 0;
|
|
ex->smp_portal_pid = -1;
|
|
up(&ex->smp_sema);
|
|
return res;
|
|
}
|
|
#endif
|