android_kernel_xiaomi_sm8350/drivers/net/ucc_geth_mii.c
Kim Phillips 728de4c927 ucc_geth: migrate ucc_geth to phylib
migrate ucc_geth to use the common phylib code.

There are several side effects from doing this:

o deprecate 'interface' property specification present
  in some old device tree source files in
  favour of a split 'max-speed' and 'interface-type'
  description to appropriately match definitions
  in include/linux/phy.h.  Note that 'interface' property
  is still honoured if max-speed or interface-type
  are not present (backward compatible).
o compile-time CONFIG_UGETH_HAS_GIGA is eliminated
  in favour of probe time speed derivation logic.
o adjust_link streamlined to only operate on maccfg2
  and upsmr.r10m, instead of reapplying static initial
  values related to the interface-type.
o Addition of UEC MDIO of_platform driver requires
  platform code add 'mdio' type to id list
  prior to calling of_platform_bus_probe (separate patch).
o ucc_struct_init introduced to reduce ucc_geth_startup
  complexity.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:04 -04:00

280 lines
6.7 KiB
C

/*
* drivers/net/ucc_geth_mii.c
*
* Gianfar Ethernet Driver -- MIIM bus implementation
* Provides Bus interface for MIIM regs
*
* Author: Li Yang
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/ocp.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/fsl_devices.h>
#include <asm/of_platform.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/ucc.h>
#include "ucc_geth_mii.h"
#include "ucc_geth.h"
#define DEBUG
#ifdef DEBUG
#define vdbg(format, arg...) printk(KERN_DEBUG , format "\n" , ## arg)
#else
#define vdbg(format, arg...) do {} while(0)
#endif
#define DRV_DESC "QE UCC Ethernet Controller MII Bus"
#define DRV_NAME "fsl-uec_mdio"
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
/* configuration has to be done through the master UEC MIIM regs */
int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
/* Setting up the MII Mangement Address Register */
out_be32(&regs->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
/* Setting up the MII Mangement Control Register with the value */
out_be32(&regs->miimcon, value);
/* Wait till MII management write is complete */
while ((in_be32(&regs->miimind)) & MIIMIND_BUSY)
cpu_relax();
return 0;
}
/* Reads from register regnum in the PHY for device dev, */
/* returning the value. Clears miimcom first. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
u16 value;
/* Setting up the MII Mangement Address Register */
out_be32(&regs->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
/* Clear miimcom, perform an MII management read cycle */
out_be32(&regs->miimcom, 0);
out_be32(&regs->miimcom, MIIMCOM_READ_CYCLE);
/* Wait till MII management write is complete */
while ((in_be32(&regs->miimind)) & (MIIMIND_BUSY | MIIMIND_NOT_VALID))
cpu_relax();
/* Read MII management status */
value = in_be32(&regs->miimstat);
return value;
}
/* Reset the MIIM registers, and wait for the bus to free */
int uec_mdio_reset(struct mii_bus *bus)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
spin_lock_bh(&bus->mdio_lock);
/* Reset the management interface */
out_be32(&regs->miimcfg, MIIMCFG_RESET_MANAGEMENT);
/* Setup the MII Mgmt clock speed */
out_be32(&regs->miimcfg, MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112);
/* Wait until the bus is free */
while ((in_be32(&regs->miimind) & MIIMIND_BUSY) && timeout--)
cpu_relax();
spin_unlock_bh(&bus->mdio_lock);
if (timeout <= 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
return -EBUSY;
}
return 0;
}
static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *match)
{
struct device *device = &ofdev->dev;
struct device_node *np = ofdev->node, *tempnp = NULL;
struct device_node *child = NULL;
struct ucc_mii_mng __iomem *regs;
struct mii_bus *new_bus;
struct resource res;
int k, err = 0;
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (NULL == new_bus)
return -ENOMEM;
new_bus->name = "UCC Ethernet Controller MII Bus";
new_bus->read = &uec_mdio_read;
new_bus->write = &uec_mdio_write;
new_bus->reset = &uec_mdio_reset;
memset(&res, 0, sizeof(res));
err = of_address_to_resource(np, 0, &res);
if (err)
goto reg_map_fail;
new_bus->id = res.start;
new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
if (NULL == new_bus->irq) {
err = -ENOMEM;
goto reg_map_fail;
}
for (k = 0; k < 32; k++)
new_bus->irq[k] = PHY_POLL;
while ((child = of_get_next_child(np, child)) != NULL) {
int irq = irq_of_parse_and_map(child, 0);
if (irq != NO_IRQ) {
const u32 *id = get_property(child, "reg", NULL);
new_bus->irq[*id] = irq;
}
}
/* Set the base address */
regs = ioremap(res.start, sizeof(struct ucc_mii_mng));
if (NULL == regs) {
err = -ENOMEM;
goto ioremap_fail;
}
new_bus->priv = (void __force *)regs;
new_bus->dev = device;
dev_set_drvdata(device, new_bus);
/* Read MII management master from device tree */
while ((tempnp = of_find_compatible_node(tempnp, "network", "ucc_geth"))
!= NULL) {
struct resource tempres;
err = of_address_to_resource(tempnp, 0, &tempres);
if (err)
goto bus_register_fail;
/* if our mdio regs fall within this UCC regs range */
if ((res.start >= tempres.start) &&
(res.end <= tempres.end)) {
/* set this UCC to be the MII master */
const u32 *id = get_property(tempnp, "device-id", NULL);
if (id == NULL)
goto bus_register_fail;
ucc_set_qe_mux_mii_mng(*id - 1);
/* assign the TBI an address which won't
* conflict with the PHYs */
out_be32(&regs->utbipar, UTBIPAR_INIT_TBIPA);
break;
}
}
err = mdiobus_register(new_bus);
if (0 != err) {
printk(KERN_ERR "%s: Cannot register as MDIO bus\n",
new_bus->name);
goto bus_register_fail;
}
return 0;
bus_register_fail:
iounmap(regs);
ioremap_fail:
kfree(new_bus->irq);
reg_map_fail:
kfree(new_bus);
return err;
}
int uec_mdio_remove(struct of_device *ofdev)
{
struct device *device = &ofdev->dev;
struct mii_bus *bus = dev_get_drvdata(device);
mdiobus_unregister(bus);
dev_set_drvdata(device, NULL);
iounmap((void __iomem *)bus->priv);
bus->priv = NULL;
kfree(bus);
return 0;
}
static struct of_device_id uec_mdio_match[] = {
{
.type = "mdio",
.compatible = "ucc_geth_phy",
},
{},
};
MODULE_DEVICE_TABLE(of, uec_mdio_match);
static struct of_platform_driver uec_mdio_driver = {
.name = DRV_NAME,
.probe = uec_mdio_probe,
.remove = uec_mdio_remove,
.match_table = uec_mdio_match,
};
int __init uec_mdio_init(void)
{
return of_register_platform_driver(&uec_mdio_driver);
}
void __exit uec_mdio_exit(void)
{
of_unregister_platform_driver(&uec_mdio_driver);
}