lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
e2c7046b2a
android_kernel_xiaomi_sm8350/target/inc/htt_isoc.h
Prakash Dhavali 7090c5fd8d qcacld-3.0: Initial snapshot of ihelium wlan driver 
qcacld-3.0: Initial snapshot of ihelium wlan driver
to match code-scanned SU Release 5.0.0.139. This is
open-source version of wlan for next Android release.

Change-Id: Icf598ca97da74f84bea607e4e902d1889806f507
2015-11-17 17:52:53 -08:00

1059 lines
39 KiB
C
Raw Blame History

/*
* Copyright (c) 2012-2014 The Linux Foundation. All rights reserved.
*
* Previously licensed under the ISC license by Qualcomm Atheros, Inc.
*
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/*
* This file was originally distributed by Qualcomm Atheros, Inc.
* under proprietary terms before Copyright ownership was assigned
* to the Linux Foundation.
*/
/**
* @file htt_isoc.h
*
* @details
* This file defines the target --> host messages that configure the
* host data-path SW with the information required for data transfers
* to and from the target.
*/
#ifndef _HTT_ISOC_H_
#define _HTT_ISOC_H_
#include <a_types.h> /* A_UINT32, A_UINT8 */
#ifdef ATHR_WIN_NWF
#pragma warning( disable:4214 ) /* bit field types other than int */
#endif
#include "htt_common.h"
/*=== definitions that apply to all messages ================================*/
typedef enum htt_isoc_t2h_msg_type {
/* 0x0 reserved for VERSION message (probably not needed) */
/* PEER_INFO - specify ID and parameters of a new peer */
HTT_ISOC_T2H_MSG_TYPE_PEER_INFO = 0x1,
/* PEER_UNMAP - deallocate the ID that refers to a peer */
HTT_ISOC_T2H_MSG_TYPE_PEER_UNMAP = 0x2,
/* ADDBA - start rx aggregation for the specified peer-TID */
HTT_ISOC_T2H_MSG_TYPE_RX_ADDBA = 0x3,
/* DELBA - stop rx aggregation for the specified peer-TID */
HTT_ISOC_T2H_MSG_TYPE_RX_DELBA = 0x4,
/* TX_COMPL_IND - over-the-air tx completion notification for a tx frame */
HTT_ISOC_T2H_MSG_TYPE_TX_COMPL_IND = 0x5,
/* SEC_IND - notification of the type of security used for a new peer */
HTT_ISOC_T2H_MSG_TYPE_SEC_IND = 0x6,
/* PEER_TX_READY - the target is ready to transmit to a new peer */
HTT_ISOC_T2H_MSG_TYPE_PEER_TX_READY = 0x7,
/* RX_ERR - notification that an rx frame was discarded due to errors */
HTT_ISOC_T2H_MSG_TYPE_RX_ERR = 0x8,
/* keep this last */
HTT_ISOC_T2H_NUM_MSGS
} htt_isoc_t2h_msg_type;
/*
* HTT ISOC target to host message type -
* stored in bits 7:0 of the first word of the message
*/
#define HTT_ISOC_T2H_MSG_TYPE_M 0xff
#define HTT_ISOC_T2H_MSG_TYPE_S 0
#define HTT_ISOC_T2H_MSG_TYPE_SET(msg_addr, msg_type) \
(*((A_UINT8 *) msg_addr) = (msg_type))
#define HTT_ISOC_T2H_MSG_TYPE_GET(msg_addr) \
(*((A_UINT8 *) msg_addr))
#ifndef INLINE
/* target FW */
#define INLINE __inline
#define HTT_ISOC_INLINE_DEF
#endif /* INLINE */
static INLINE void
htt_isoc_t2h_field_set(A_UINT32 *msg_addr32,
unsigned offset32,
unsigned mask, unsigned shift, unsigned value)
{
/* sanity check: make sure the value fits within the field */
/* cdf_assert(value << shift == (value << shift) | mask); */
msg_addr32 += offset32;
/* clear the field */
*msg_addr32 &= ~mask;
/* write the new value */
*msg_addr32 |= (value << shift);
}
#ifdef HTT_ISOC_INLINE_DEF
#undef HTT_ISOC_INLINE_DEF
#undef INLINE
#endif
#define HTT_ISOC_T2H_FIELD_GET(msg_addr32, offset32, mask, shift) \
(((*(msg_addr32 + offset32)) & mask) >> shift)
typedef enum {
/* ASSOC - "real" peer from STA-AP association */
HTT_ISOC_T2H_PEER_TYPE_ASSOC = 0x0,
/* SELF - self-peer for unicast tx to unassociated peer */
HTT_ISOC_T2H_PEER_TYPE_SELF = 0x1,
/* BSSID - reserved for FW use for BT-AMP+IBSS */
HTT_ISOC_T2H_PEER_TYPE_BSSID = 0x2,
/* BCAST - self-peer for multicast / broadcast tx */
HTT_ISOC_T2H_PEER_TYPE_BCAST = 0x3
} HTT_ISOC_T2H_PEER_TYPE_ENUM;
enum {
HTT_ISOC_NON_QOS = 0,
HTT_ISOC_QOS = 1
};
enum {
HTT_ISOC_RMF_DISABLED = 0,
HTT_ISOC_RMF_ENABLED = 1
};
enum {
HTT_ISOC_TID_MGMT = 7
};
/*=== definitions for specific messages =====================================*/
/*=== PEER_INFO message ===*/
/**
* @brief target -> host peer info message definition
*
* @details
* The following diagram shows the format of the peer info message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* |31 25|24|23 18|17|16|15 11|10|9|8|7|6| 0|
* |-----------------------------------------------------------------------|
* | mgmt DPU idx | bcast DPU idx | DPU idx | msg type |
* |-----------------------------------------------------------------------|
* | mgmt DPU sig |bcast DPU sig | DPU sig | peer ID |
* |-----------------------------------------------------------------------|
* | MAC addr 1 | MAC addr 0 | vdev ID | |R| peer type |
* |-----------------------------------------------------------------------|
* | MAC addr 5 | MAC addr 4 | MAC addr 3 | MAC addr 2 |
* |-----------------------------------------------------------------------|
*
*
* The following field definitions describe the format of the peer info
* message sent from the target to the host.
*
* WORD 0:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as peer info message
* Value: 0x1
* - DPU_IDX
* Bits 15:8
* Purpose: specify the DPU index (a.k.a. security key ID) to use for
* unicast data frames sent to this peer
* Value: key ID
* - BCAST_DPU_IDX
* Bits 23:16
* Purpose: specify the DPU index (a.k.a. security key ID) to use for
* broadcast data frames sent by this (self) peer
* Value: key ID
* - MGMT_DPU_IDX
* Bits 31:24
* Purpose: specify the DPU index (a.k.a. security key ID) to use for
* unicast management frames sent by this (self) peer
* Value: key ID
* WORD 1:
* - PEER_ID
* Bits 10:0
* Purpose: The ID that the target has allocated to refer to the peer
* - DPU_SIG
* Bits 17:11
* Purpose: specify the DPU signature (a.k.a. security key validity
* magic number) to specify for unicast data frames sent to this peer
* - BCAST_DPU_SIG
* Bits 24:18
* Purpose: specify the DPU signature (a.k.a. security key validity
* magic number) to specify for broadcast data frames sent by this
* (self) peer
* - MGMT_DPU_SIG
* Bits 31:25
* Purpose: specify the DPU signature (a.k.a. security key validity
* magic number) to specify for unicast management frames sent by this
* (self) peer
* WORD 2:
* - PEER_TYPE
* Bits 5:0
* Purpose: specify whether the peer in question is a real peer or
* one of the types of "self-peer" created for the vdev
* Value: HTT_ISOC_T2H_PEER_TYPE enum
* - RMF_ENABLED (R)
* Bit 6
* Purpose: specify whether the peer in question has enable robust
* management frames, to encrypt certain managment frames
* Value: HTT_ISOC_RMF enum
* Value: HTT_ISOC_NON_QOS or HTT_ISOC_QOS
* - VDEV_ID
* Bits 15:8
* Purpose: For a real peer, the vdev ID indicates which virtual device
* the peer is associated with. For a self-peer, the vdev ID shows
* which virtual device the self-peer represents.
* - MAC_ADDR_L16
* Bits 31:16
* Purpose: Identifies which peer the peer ID is for.
* Value: lower 2 bytes of the peer's MAC address
* For a self-peer, the peer's MAC address is the MAC address of the
* vdev the self-peer represents.
* WORD 3:
* - MAC_ADDR_U32
* Bits 31:0
* Purpose: Identifies which peer the peer ID is for.
* Value: upper 4 bytes of the peer's MAC address
* For a self-peer, the peer's MAC address is the MAC address of the
* vdev the self-peer represents.
*/
typedef struct htt_isoc_t2h_peer_info_s {
/* word 0 */
A_UINT32 msg_type : 8, /* HTT_ISOC_T2H_MSG_TYPE_PEER_INFO */
dpu_idx : 8, bcast_dpu_idx : 8, mgmt_dpu_idx : 8;
/* word 1 */
A_UINT32 peer_id : 11, dpu_sig : 7, bcast_dpu_sig : 7, mgmt_dpu_sig : 7;
/* word 2 */
A_UINT32
peer_type : 6, rmf_enabled : 1, reserved0 : 1, vdev_id : 8, mac_addr_l16 : 16;
/* word 3 */
A_UINT32 mac_addr_u32;
} htt_isoc_t2h_peer_info_t;
/* word 0 */
#define HTT_ISOC_T2H_PEER_INFO_DPU_IDX_OFFSET32 0
#define HTT_ISOC_T2H_PEER_INFO_DPU_IDX_M 0x0000ff00
#define HTT_ISOC_T2H_PEER_INFO_DPU_IDX_S 8
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_IDX_OFFSET32 0
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_IDX_M 0x00ff0000
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_IDX_S 16
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_IDX_OFFSET32 0
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_IDX_M 0xff000000
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_IDX_S 24
/* word 1 */
#define HTT_ISOC_T2H_PEER_INFO_PEER_ID_OFFSET32 1
#define HTT_ISOC_T2H_PEER_INFO_PEER_ID_M 0x000007ff
#define HTT_ISOC_T2H_PEER_INFO_PEER_ID_S 0
#define HTT_ISOC_T2H_PEER_INFO_DPU_SIG_OFFSET32 1
#define HTT_ISOC_T2H_PEER_INFO_DPU_SIG_M 0x0003f800
#define HTT_ISOC_T2H_PEER_INFO_DPU_SIG_S 11
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_SIG_OFFSET32 1
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_SIG_M 0x01fc0000
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_SIG_S 18
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_SIG_OFFSET32 1
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_SIG_M 0xfe000000
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_SIG_S 25
/* word 2 */
#define HTT_ISOC_T2H_PEER_INFO_PEER_TYPE_OFFSET32 2
#define HTT_ISOC_T2H_PEER_INFO_PEER_TYPE_M 0x0000003f
#define HTT_ISOC_T2H_PEER_INFO_PEER_TYPE_S 0
#define HTT_ISOC_T2H_PEER_INFO_RMF_ENABLED_OFFSET32 2
#define HTT_ISOC_T2H_PEER_INFO_RMF_ENABLED_M 0x00000040
#define HTT_ISOC_T2H_PEER_INFO_RMF_ENABLED_S 6
#define HTT_ISOC_T2H_PEER_INFO_VDEV_ID_OFFSET32 2
#define HTT_ISOC_T2H_PEER_INFO_VDEV_ID_M 0x0000ff00
#define HTT_ISOC_T2H_PEER_INFO_VDEV_ID_S 8
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_L16_OFFSET32 2
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_L16_M 0xffff0000
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_L16_S 16
/* word 3 */
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_U32_OFFSET32 3
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_U32_M 0xffffffff
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_U32_S 0
/* general field access macros */
#define HTT_ISOC_T2H_PEER_INFO_FIELD_SET(field, msg_addr, value) \
htt_isoc_t2h_field_set( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_PEER_INFO_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_PEER_INFO_ ## field ## _M, \
HTT_ISOC_T2H_PEER_INFO_ ## field ## _S, \
value)
#define HTT_ISOC_T2H_PEER_INFO_FIELD_GET(field, msg_addr) \
HTT_ISOC_T2H_FIELD_GET( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_PEER_INFO_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_PEER_INFO_ ## field ## _M, \
HTT_ISOC_T2H_PEER_INFO_ ## field ## _S)
/* access macros for specific fields */
#define HTT_ISOC_T2H_PEER_INFO_DPU_IDX_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(DPU_IDX, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_DPU_IDX_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(DPU_IDX, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_IDX_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(BCAST_DPU_IDX, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_IDX_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(BCAST_DPU_IDX, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_IDX_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(MGMT_DPU_IDX, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_IDX_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(MGMT_DPU_IDX, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_PEER_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(PEER_ID, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_PEER_ID_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(PEER_ID, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_DPU_SIG_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(DPU_SIG, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_DPU_SIG_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(DPU_SIG, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_SIG_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(BCAST_DPU_SIG, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_BCAST_DPU_SIG_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(BCAST_DPU_SIG, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_SIG_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(MGMT_DPU_SIG, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_MGMT_DPU_SIG_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(MGMT_DPU_SIG, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_PEER_TYPE_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(PEER_TYPE, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_PEER_TYPE_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(PEER_TYPE, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_QOS_CAPABLE_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(QOS_CAPABLE, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_QOS_CAPABLE_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(QOS_CAPABLE, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_RMF_ENABLED_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(RMF_ENABLED, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_RMF_ENABLED_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(RMF_ENABLED, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_VDEV_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(VDEV_ID, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_VDEV_ID_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(VDEV_ID, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_L16_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(MAC_ADDR_L16, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_L16_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(MAC_ADDR_L16, msg_addr)
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_U32_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_INFO_FIELD_SET(MAC_ADDR_U32, msg_addr, value)
#define HTT_ISOC_T2H_PEER_INFO_MAC_ADDR_U32_GET(msg_addr) \
HTT_ISOC_T2H_PEER_INFO_FIELD_GET(MAC_ADDR_U32, msg_addr)
/*=== PEER_UNMAP message ===*/
/**
* @brief target -> host peer unmap message definition
*
* @details
* The following diagram shows the format of the peer unmap message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* |31 19|18 8|7 0|
* |-----------------------------------------------------------------------|
* | reserved | peer ID | msg type |
* |-----------------------------------------------------------------------|
*
*
* The following field definitions describe the format of the peer info
* message sent from the target to the host.
*
* WORD 0:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as peer unmap message
* Value: 0x2
* - PEER_ID
* Bits 18:8
* Purpose: The ID that the target has allocated to refer to the peer
*/
typedef struct htt_isoc_t2h_peer_unmap_s {
/* word 0 */
A_UINT32 msg_type : 8, /* HTT_ISOC_T2H_MSG_TYPE_PEER_UNMAP */
peer_id : 11, reserved0 : 13;
} htt_isoc_t2h_peer_unmap_t;
/* word 0 */
#define HTT_ISOC_T2H_PEER_UNMAP_PEER_ID_OFFSET32 0
#define HTT_ISOC_T2H_PEER_UNMAP_PEER_ID_M 0x0007ff00
#define HTT_ISOC_T2H_PEER_UNMAP_PEER_ID_S 8
/* general field access macros */
#define HTT_ISOC_T2H_PEER_UNMAP_FIELD_SET(field, msg_addr, value) \
htt_isoc_t2h_field_set( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_PEER_UNMAP_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_PEER_UNMAP_ ## field ## _M, \
HTT_ISOC_T2H_PEER_UNMAP_ ## field ## _S, \
value)
#define HTT_ISOC_T2H_PEER_UNMAP_FIELD_GET(field, msg_addr) \
HTT_ISOC_T2H_FIELD_GET( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_PEER_UNMAP_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_PEER_UNMAP_ ## field ## _M, \
HTT_ISOC_T2H_PEER_UNMAP_ ## field ## _S)
/* access macros for specific fields */
#define HTT_ISOC_T2H_PEER_UNMAP_PEER_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_UNMAP_FIELD_SET(PEER_ID, msg_addr, value)
#define HTT_ISOC_T2H_PEER_UNMAP_PEER_ID_GET(msg_addr) \
HTT_ISOC_T2H_PEER_UNMAP_FIELD_GET(PEER_ID, msg_addr)
/*=== ADDBA message ===*/
enum {
htt_isoc_addba_success = 0,
/* TBD: use different failure values to specify failure causes? */
htt_isoc_addba_fail = 1,
};
/**
* @brief target -> host ADDBA message definition
*
* @details
* The following diagram shows the format of the rx ADDBA message sent
* from the target to the host:
*
* |31 20|19 16|15 12|11 8|7 0|
* |---------------------------------------------------------------------|
* | peer ID | TID | window size | msg type |
* |---------------------------------------------------------------------|
* | reserved |S| start seq num |
* |---------------------------------------------------------------------|
*
* The following field definitions describe the format of the ADDBA
* message sent from the target to the host.
*
* WORD 0:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an ADDBA message
* Value: 0x3
* - WIN_SIZE
* Bits 15:8
* Purpose: Specifies the length of the block ack window (max = 64).
* Value:
* block ack window length specified by the received ADDBA
* management message.
* - TID
* Bits 19:16
* Purpose: Specifies which traffic identifier the ADDBA is for.
* Value:
* TID specified by the received ADDBA management message.
* - PEER_ID
* Bits 31:20
* Purpose: Identifies which peer sent the ADDBA.
* Value:
* ID (hash value) used by the host for fast, direct lookup of
* host SW peer info, including rx reorder states.
* - START_SEQ_NUM
* Bits 11:0
* Purpose: Specifies the initial location of the block ack window
* Value: start sequence value specified by the ADDBA-request message
* - STATUS
* Bit 12
* Purpose: status of the WMI ADDBA request
* Value: 0 - SUCCESS, 1 - FAILURE
*/
typedef struct htt_isoc_t2h_addba_s {
/* word 0 */
A_UINT32 msg_type : 8, /* HTT_ISOC_T2H_MSG_TYPE_ADDBA */
win_size : 8, tid : 4, peer_id : 12;
/* word 1 */
A_UINT32 start_seq_num : 12, status : 1, reserved0 : 19;
} htt_isoc_t2h_addba_t;
/* word 0 */
#define HTT_ISOC_T2H_ADDBA_WIN_SIZE_OFFSET32 0
#define HTT_ISOC_T2H_ADDBA_WIN_SIZE_M 0x0000ff00
#define HTT_ISOC_T2H_ADDBA_WIN_SIZE_S 8
#define HTT_ISOC_T2H_ADDBA_TID_OFFSET32 0
#define HTT_ISOC_T2H_ADDBA_TID_M 0x000f0000
#define HTT_ISOC_T2H_ADDBA_TID_S 16
#define HTT_ISOC_T2H_ADDBA_PEER_ID_OFFSET32 0
#define HTT_ISOC_T2H_ADDBA_PEER_ID_M 0xfff00000
#define HTT_ISOC_T2H_ADDBA_PEER_ID_S 20
/* word 1 */
#define HTT_ISOC_T2H_ADDBA_START_SEQ_NUM_OFFSET32 1
#define HTT_ISOC_T2H_ADDBA_START_SEQ_NUM_M 0x00000fff
#define HTT_ISOC_T2H_ADDBA_START_SEQ_NUM_S 0
#define HTT_ISOC_T2H_ADDBA_STATUS_OFFSET32 1
#define HTT_ISOC_T2H_ADDBA_STATUS_M 0x00001000
#define HTT_ISOC_T2H_ADDBA_STATUS_S 12
/* general field access macros */
#define HTT_ISOC_T2H_ADDBA_FIELD_SET(field, msg_addr, value) \
htt_isoc_t2h_field_set( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_ADDBA_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_ADDBA_ ## field ## _M, \
HTT_ISOC_T2H_ADDBA_ ## field ## _S, \
value)
#define HTT_ISOC_T2H_ADDBA_FIELD_GET(field, msg_addr) \
HTT_ISOC_T2H_FIELD_GET( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_ADDBA_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_ADDBA_ ## field ## _M, \
HTT_ISOC_T2H_ADDBA_ ## field ## _S)
/* access macros for specific fields */
#define HTT_ISOC_T2H_ADDBA_WIN_SIZE_SET(msg_addr, value) \
HTT_ISOC_T2H_ADDBA_FIELD_SET(WIN_SIZE, msg_addr, value)
#define HTT_ISOC_T2H_ADDBA_WIN_SIZE_GET(msg_addr) \
HTT_ISOC_T2H_ADDBA_FIELD_GET(WIN_SIZE, msg_addr)
#define HTT_ISOC_T2H_ADDBA_TID_SET(msg_addr, value) \
HTT_ISOC_T2H_ADDBA_FIELD_SET(TID, msg_addr, value)
#define HTT_ISOC_T2H_ADDBA_TID_GET(msg_addr) \
HTT_ISOC_T2H_ADDBA_FIELD_GET(TID, msg_addr)
#define HTT_ISOC_T2H_ADDBA_PEER_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_ADDBA_FIELD_SET(PEER_ID, msg_addr, value)
#define HTT_ISOC_T2H_ADDBA_PEER_ID_GET(msg_addr) \
HTT_ISOC_T2H_ADDBA_FIELD_GET(PEER_ID, msg_addr)
#define HTT_ISOC_T2H_ADDBA_START_SEQ_NUM_SET(msg_addr, value) \
HTT_ISOC_T2H_ADDBA_FIELD_SET(START_SEQ_NUM, msg_addr, value)
#define HTT_ISOC_T2H_ADDBA_START_SEQ_NUM_GET(msg_addr) \
HTT_ISOC_T2H_ADDBA_FIELD_GET(START_SEQ_NUM, msg_addr)
#define HTT_ISOC_T2H_ADDBA_STATUS_SET(msg_addr, value) \
HTT_ISOC_T2H_ADDBA_FIELD_SET(STATUS, msg_addr, value)
#define HTT_ISOC_T2H_ADDBA_STATUS_GET(msg_addr) \
HTT_ISOC_T2H_ADDBA_FIELD_GET(STATUS, msg_addr)
/*=== DELBA message ===*/
/**
* @brief target -> host DELBA message definition
*
* @details
* The following diagram shows the format of the rx DELBA message sent
* from the target to the host:
*
* |31 20|19 16|15 12|11 8|7 0|
* |---------------------------------------------------------------------|
* | peer ID | TID | reserved |S| msg type |
* |---------------------------------------------------------------------|
*
* The following field definitions describe the format of the ADDBA
* message sent from the target to the host.
*
* WORD 0:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an DELBA message
* Value: 0x4
* - TID
* Bits 19:16
* Purpose: Specifies which traffic identifier the DELBA is for.
* Value:
* TID specified by the received DELBA management message.
* - PEER_ID
* Bits 31:20
* Purpose: Identifies which peer sent the DELBA.
* Value:
* ID (hash value) used by the host for fast, direct lookup of
* host SW peer info, including rx reorder states.
* - STATUS
* Bit 8
* Purpose: status of the WMI DELBA request
* Value: 0 - SUCCESS, 1 - FAILURE
*/
typedef struct htt_isoc_t2h_delba_s {
/* word 0 */
A_UINT32 msg_type : 8, /* HTT_ISOC_T2H_MSG_TYPE_DELBA */
status : 1, reserved0 : 7, tid : 4, peer_id : 12;
} htt_isoc_t2h_delba_t;
/* word 0 */
#define HTT_ISOC_T2H_DELBA_TID_OFFSET32 0
#define HTT_ISOC_T2H_DELBA_TID_M 0x000f0000
#define HTT_ISOC_T2H_DELBA_TID_S 16
#define HTT_ISOC_T2H_DELBA_PEER_ID_OFFSET32 0
#define HTT_ISOC_T2H_DELBA_PEER_ID_M 0xfff00000
#define HTT_ISOC_T2H_DELBA_PEER_ID_S 20
#define HTT_ISOC_T2H_DELBA_STATUS_OFFSET32 0
#define HTT_ISOC_T2H_DELBA_STATUS_M 0x00000100
#define HTT_ISOC_T2H_DELBA_STATUS_S 8
/* general field access macros */
#define HTT_ISOC_T2H_DELBA_FIELD_SET(field, msg_addr, value) \
htt_isoc_t2h_field_set( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_DELBA_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_DELBA_ ## field ## _M, \
HTT_ISOC_T2H_DELBA_ ## field ## _S, \
value)
#define HTT_ISOC_T2H_DELBA_FIELD_GET(field, msg_addr) \
HTT_ISOC_T2H_FIELD_GET( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_DELBA_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_DELBA_ ## field ## _M, \
HTT_ISOC_T2H_DELBA_ ## field ## _S)
/* access macros for specific fields */
#define HTT_ISOC_T2H_DELBA_TID_SET(msg_addr, value) \
HTT_ISOC_T2H_DELBA_FIELD_SET(TID, msg_addr, value)
#define HTT_ISOC_T2H_DELBA_TID_GET(msg_addr) \
HTT_ISOC_T2H_DELBA_FIELD_GET(TID, msg_addr)
#define HTT_ISOC_T2H_DELBA_PEER_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_DELBA_FIELD_SET(PEER_ID, msg_addr, value)
#define HTT_ISOC_T2H_DELBA_PEER_ID_GET(msg_addr) \
HTT_ISOC_T2H_DELBA_FIELD_GET(PEER_ID, msg_addr)
#define HTT_ISOC_T2H_DELBA_STATUS_SET(msg_addr, value) \
HTT_ISOC_T2H_DELBA_FIELD_SET(STATUS, msg_addr, value)
#define HTT_ISOC_T2H_DELBA_STATUS_GET(msg_addr) \
HTT_ISOC_T2H_DELBA_FIELD_GET(STATUS, msg_addr)
/*=== SEC_IND message ===*/
/**
* @brief target -> host Security indication message definition
*
* @details
* The following diagram shows the format of the SEC_IND message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* |31 25|24|23 18|17|16|15 11|10|9|8|7|6| 0|
* |-----------------------------------------------------------------------|
* | is unicast | sec type | Peer id | msg type |
* |-----------------------------------------------------------------------|
* | mic key1 |
* |-----------------------------------------------------------------------|
* | mic key2 |
* |-----------------------------------------------------------------------|
*
*
* The following field definitions describe the format of the peer info
* message sent from the target to the host.
*
* WORD 0:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as SEC_IND message
* Value: 0x6
* - PEER_ID
* Bits 15:8
* Purpose: The ID that the target has allocated to refer to the peer
* Value: Peer ID
* - SEC_TYPE
* Bits 23:16
* Purpose: specify the security encryption type
* Value: htt_sec_type
* - is unicast
* Bits 31:24
* Purpose: specify unicast/bcast
* Value: 1-unicast/0-bcast
* WORD 1:
* - MIC1
* Bits 31:0
* Purpose: Mickey1
* WORD 2:
* - MIC2
* Bits 31:0
* Purpose: Mickey2
*/
typedef struct htt_isoc_t2h_sec_ind_s {
/* word 0 */
A_UINT32 msg_type : 8, /* HTT_ISOC_T2H_MSG_TYPE_SEC_IND */
peer_id : 8, sec_type : 8, is_unicast : 8;
/* word 1 */
A_UINT32 mic_key1;
/* word 2 */
A_UINT32 mic_key2;
/* word 3 */
A_UINT32 status;
} htt_isoc_t2h_sec_ind_t;
/* word 0 */
#define HTT_ISOC_T2H_SEC_IND_PEER_ID_OFFSET32 0
#define HTT_ISOC_T2H_SEC_IND_PEER_ID_M 0x0000ff00
#define HTT_ISOC_T2H_SEC_IND_PEER_ID_S 8
#define HTT_ISOC_T2H_SEC_IND_SEC_TYPE_OFFSET32 0
#define HTT_ISOC_T2H_SEC_IND_SEC_TYPE_M 0x00ff0000
#define HTT_ISOC_T2H_SEC_IND_SEC_TYPE_S 16
#define HTT_ISOC_T2H_SEC_IND_IS_UNICAST_OFFSET32 0
#define HTT_ISOC_T2H_SEC_IND_IS_UNICAST_M 0xff000000
#define HTT_ISOC_T2H_SEC_IND_IS_UNICAST_S 24
/* word 1 */
#define HTT_ISOC_T2H_SEC_IND_MIC1_OFFSET32 1
#define HTT_ISOC_T2H_SEC_IND_MIC1_M 0xffffffff
#define HTT_ISOC_T2H_SEC_IND_MIC1_S 0
/* word 2 */
#define HTT_ISOC_T2H_SEC_IND_MIC2_OFFSET32 2
#define HTT_ISOC_T2H_SEC_IND_MIC2_M 0xffffffff
#define HTT_ISOC_T2H_SEC_IND_MIC2_S 0
/* general field access macros */
#define HTT_ISOC_T2H_SEC_IND_FIELD_SET(field, msg_addr, value) \
htt_isoc_t2h_field_set( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_SEC_IND_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_SEC_IND_ ## field ## _M, \
HTT_ISOC_T2H_SEC_IND_ ## field ## _S, \
value)
#define HTT_ISOC_T2H_SEC_IND_FIELD_GET(field, msg_addr) \
HTT_ISOC_T2H_FIELD_GET( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_SEC_IND_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_SEC_IND_ ## field ## _M, \
HTT_ISOC_T2H_SEC_IND_ ## field ## _S)
/* access macros for specific fields */
#define HTT_ISOC_T2H_SEC_IND_PEER_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_SEC_IND_FIELD_SET(PEER_ID, msg_addr, value)
#define HTT_ISOC_T2H_SEC_IND_PEER_ID_GET(msg_addr) \
HTT_ISOC_T2H_SEC_IND_FIELD_GET(PEER_ID, msg_addr)
#define HTT_ISOC_T2H_SEC_IND_SEC_TYPE_SET(msg_addr, value) \
HTT_ISOC_T2H_SEC_IND_FIELD_SET(SEC_TYPE, msg_addr, value)
#define HTT_ISOC_T2H_SEC_IND_SEC_TYPE_GET(msg_addr) \
HTT_ISOC_T2H_SEC_IND_FIELD_GET(SEC_TYPE, msg_addr)
#define HTT_ISOC_T2H_SEC_IND_IS_UNICAST_SET(msg_addr, value) \
HTT_ISOC_T2H_SEC_IND_FIELD_SET(IS_UNICAST, msg_addr, value)
#define HTT_ISOC_T2H_SEC_IND_IS_UNICAST_GET(msg_addr) \
HTT_ISOC_T2H_SEC_IND_FIELD_GET(IS_UNICAST, msg_addr)
#define HTT_ISOC_T2H_SEC_IND_MIC1_SET(msg_addr, value) \
HTT_ISOC_T2H_SEC_IND_FIELD_SET(MIC1, msg_addr, value)
#define HTT_ISOC_T2H_SEC_IND_MIC1_GET(msg_addr) \
HTT_ISOC_T2H_SEC_IND_FIELD_GET(MIC1, msg_addr)
#define HTT_ISOC_T2H_SEC_IND_MIC2_SET(msg_addr, value) \
HTT_ISOC_T2H_SEC_IND_FIELD_SET(MIC2, msg_addr, value)
#define HTT_ISOC_T2H_SEC_IND_MIC2_GET(msg_addr) \
HTT_ISOC_T2H_SEC_IND_FIELD_GET(MIC2, msg_addr)
/*=== PEER_TX_READY message ===*/
/**
* @brief target -> host peer tx ready message definition
*
* @details
* The following diagram shows the format of the peer tx ready message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* |31 19|18 8|7 0|
* |-----------------------------------------------------------------------|
* | reserved | peer ID | msg type |
* |-----------------------------------------------------------------------|
*
*
* The following field definitions describe the format of the peer info
* message sent from the target to the host.
*
* WORD 0:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as peer tx ready message
* Value: 0x7
* - PEER_ID
* Bits 18:8
* Purpose: The ID assigned to the peer by the PEER_INFO message
*/
typedef struct htt_isoc_t2h_peer_tx_ready_s {
/* word 0 */
A_UINT32 msg_type : 8, /* HTT_ISOC_T2H_MSG_TYPE_PEER_TX_READY */
peer_id : 11, reserved0 : 13;
} htt_isoc_t2h_peer_tx_ready_t;
/* word 0 */
#define HTT_ISOC_T2H_PEER_TX_READY_PEER_ID_OFFSET32 0
#define HTT_ISOC_T2H_PEER_TX_READY_PEER_ID_M 0x0007ff00
#define HTT_ISOC_T2H_PEER_TX_READY_PEER_ID_S 8
/* general field access macros */
#define HTT_ISOC_T2H_PEER_TX_READY_FIELD_SET(field, msg_addr, value) \
htt_isoc_t2h_field_set( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_PEER_TX_READY_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_PEER_TX_READY_ ## field ## _M, \
HTT_ISOC_T2H_PEER_TX_READY_ ## field ## _S, \
value)
#define HTT_ISOC_T2H_PEER_TX_READY_FIELD_GET(field, msg_addr) \
HTT_ISOC_T2H_FIELD_GET( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_PEER_TX_READY_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_PEER_TX_READY_ ## field ## _M, \
HTT_ISOC_T2H_PEER_TX_READY_ ## field ## _S)
/* access macros for specific fields */
#define HTT_ISOC_T2H_PEER_TX_READY_PEER_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_PEER_TX_READY_FIELD_SET(PEER_ID, msg_addr, value)
#define HTT_ISOC_T2H_PEER_TX_READY_PEER_ID_GET(msg_addr) \
HTT_ISOC_T2H_PEER_TX_READY_FIELD_GET(PEER_ID, msg_addr)
/*=== RX_ERR message ===*/
/**
* @brief target -> host rx error notification message definition
*
* @details
* The following diagram shows the format of the rx err message sent
* from the target to the host. This layout assumes the target operates
* as little-endian.
*
* |31 16|15 8|7|6|5|4 0|
* |---------------------------------------------------------------------|
* | peer ID | rx err type | msg type |
* |---------------------------------------------------------------------|
* | reserved | rx err count |M| r | ext TID |
* |---------------------------------------------------------------------|
* M = multicast
* r = reserved
*
* The following field definitions describe the format of the peer info
* message sent from the target to the host.
*
* WORD 0:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as an rx err message
* Value: 0x8
* - RX_ERR_TYPE
* Bits 15:8
* Purpose: specifies which type of rx error is being reported
* Value: htt_rx_ind_mpdu_status enum
* - PEER_ID
* Bits 31:16
* Purpose: specify which peer sent the frame that resulted in an error
* WORD 1:
* - EXT_TID
* Bits 4:0
* Purpose: specifies which traffic type had the rx error
* Value: 0-15 for a real TID value, 16 for non-QoS data, 31 for unknown
* - MCAST
* Bit 6
* Purpose: specify whether the rx error frame was unicast or multicast
* Value: 0 -> unicast, 1 -> multicast
* - L2_HDR_IS_80211
* Bit 7
* Purpose: specifies whether the included L2 header (if present) is in
* 802.3 or 802.11 format
* Value: 0 -> 802.3, 1 -> 802.11
* - L2_HDR_BYTES
* Bits 15:8
* Purpose: Specify the size of the L2 header in this rx error report.
* Value:
* If no L2 header is included, this field shall be 0.
* If a 802.3 + LLC/SNAP header is included, this field shall be
* 14 (ethernet header) + 8 (LLC/SNAP).
* If a 802.11 header is included, this field shall be 24 bytes for
* a basic header, or 26 bytes if a QoS control field is included,
* or 30 bytes if a 4th address is included, or 32 bytes if a 4th
* address and a QoS control field are included, etc.
* Though the L2 header included in the message needs to include
* padding up to a 4-byte boundary, this L2 header size field need
* not account for the padding following the L2 header.
* - SEC_HDR_BYTES
* Bits 23:16
* Purpose: Specify the size of the security encapsulation header in
* this rx error report.
* Value:
* If no security header is included, this field shall be 0.
* If a security header is included, this field depends on the
* security type, which can be inferred from the rx error type.
* For TKIP MIC errors, the security header could be any of:
* 8 - if IV / KeyID and Extended IV are included
* 16 - if MIC is also included
* 20 - if ICV is also included
* - RX_ERR_CNT
* Bits 31:24
* Purpose: specifies how many rx errors are reported in this message
* Value:
* Rx error reports that include a L2 header and/or security header
* will set this field to 1, to indicate that the error notification
* is for a single frame.
* Rx error reports that don't include a L2 header or security header
* can use this field to send a single message to report multiple
* erroneous rx frames.
*/
typedef struct htt_isoc_t2h_rx_err_s {
/* word 0 */
A_UINT32 msg_type : 8, /* HTT_ISOC_T2H_MSG_TYPE_RX_ERR */
rx_err_type : 8, peer_id : 16;
/* word 1 */
A_UINT32
ext_tid : 5,
reserved1 : 1,
mcast : 1,
l2_hdr_is_80211 : 1, l2_hdr_bytes : 8, sec_hdr_bytes : 8, rx_err_cnt : 8;
/* words 2 - M-1: L2 header */
/* words M - N: security header */
} htt_isoc_t2h_rx_err_t;
/* word 0 */
#define HTT_ISOC_T2H_RX_ERR_TYPE_OFFSET32 0
#define HTT_ISOC_T2H_RX_ERR_TYPE_M 0x0000ff00
#define HTT_ISOC_T2H_RX_ERR_TYPE_ID_S 8
#define HTT_ISOC_T2H_RX_ERR_PEER_ID_OFFSET32 0
#define HTT_ISOC_T2H_RX_ERR_PEER_ID_M 0xffff0000
#define HTT_ISOC_T2H_RX_ERR_PEER_ID_S 16
/* word 1 */
#define HTT_ISOC_T2H_RX_ERR_EXT_TID_OFFSET32 1
#define HTT_ISOC_T2H_RX_ERR_EXT_TID_M 0x0000001f
#define HTT_ISOC_T2H_RX_ERR_EXT_TID_ID_S 0
#define HTT_ISOC_T2H_RX_ERR_MCAST_OFFSET32 1
#define HTT_ISOC_T2H_RX_ERR_MCAST_M 0x00000040
#define HTT_ISOC_T2H_RX_ERR_MCAST_ID_S 6
#define HTT_ISOC_T2H_RX_ERR_L2_HDR_IS_80211_OFFSET32 1
#define HTT_ISOC_T2H_RX_ERR_L2_HDR_IS_80211_M 0x00000080
#define HTT_ISOC_T2H_RX_ERR_L2_HDR_IS_80211_ID_S 7
#define HTT_ISOC_T2H_RX_L2_HDR_BYTES_OFFSET32 1
#define HTT_ISOC_T2H_RX_L2_HDR_BYTES_M 0x0000ff00
#define HTT_ISOC_T2H_RX_L2_HDR_BYTES_ID_S 8
#define HTT_ISOC_T2H_RX_SEC_HDR_BYTES_OFFSET32 1
#define HTT_ISOC_T2H_RX_SEC_HDR_BYTES_M 0x00ff0000
#define HTT_ISOC_T2H_RX_SEC_HDR_BYTES_ID_S 16
#define HTT_ISOC_T2H_RX_ERR_CNT_OFFSET32 1
#define HTT_ISOC_T2H_RX_ERR_CNT_M 0xff000000
#define HTT_ISOC_T2H_RX_ERR_CNT_ID_S 24
/* general field access macros */
#define HTT_ISOC_T2H_RX_ERR_FIELD_SET(field, msg_addr, value) \
htt_isoc_t2h_field_set( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_RX_ERR_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_RX_ERR_ ## field ## _M, \
HTT_ISOC_T2H_RX_ERR_ ## field ## _S, \
value)
#define HTT_ISOC_T2H_RX_ERR_FIELD_GET(field, msg_addr) \
HTT_ISOC_T2H_FIELD_GET( \
((A_UINT32 *) msg_addr), \
HTT_ISOC_T2H_RX_ERR_ ## field ## _OFFSET32, \
HTT_ISOC_T2H_RX_ERR_ ## field ## _M, \
HTT_ISOC_T2H_RX_ERR_ ## field ## _S)
/* access macros for specific fields */
#define HTT_ISOC_T2H_RX_ERR_TYPE_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(TYPE, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_TYPE_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(TYPE, msg_addr)
#define HTT_ISOC_T2H_RX_ERR_PEER_ID_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(PEER_ID, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_PEER_ID_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(PEER_ID, msg_addr)
#define HTT_ISOC_T2H_RX_ERR_EXT_TID_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(EXT_TID, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_EXT_TID_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(EXT_TID, msg_addr)
#define HTT_ISOC_T2H_RX_ERR_MCAST_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(MCAST, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_MCAST_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(MCAST, msg_addr)
#define HTT_ISOC_T2H_RX_ERR_L2_HDR_IS_80211_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(L2_HDR_IS_80211, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_L2_HDR_IS_80211_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(L2_HDR_IS_80211, msg_addr)
#define HTT_ISOC_T2H_RX_ERR_L2_HDR_BYTES_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(L2_HDR_BYTES, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_L2_HDR_BYTES_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(L2_HDR_BYTES, msg_addr)
#define HTT_ISOC_T2H_RX_ERR_SEC_HDR_BYTES_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(SEC_HDR_BYTES, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_SEC_HDR_BYTES_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(SEC_HDR_BYTES, msg_addr)
#define HTT_ISOC_T2H_RX_ERR_CNT_SET(msg_addr, value) \
HTT_ISOC_T2H_RX_ERR_FIELD_SET(CNT, msg_addr, value)
#define HTT_ISOC_T2H_RX_ERR_CNT_GET(msg_addr) \
HTT_ISOC_T2H_RX_ERR_FIELD_GET(CNT, msg_addr)
#endif /* _HTT_ISOC_H_ */
Reference in New Issue View Git Blame Copy Permalink