e33fe4d86f
If disconnect() is called for a logical disconnect, no more IO must be done after disconnect() returns, or the old and new drivers may conflict. This patch avoids this by using the flag and lock introduced by the earlier patch for the mos7720 driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
825 lines
25 KiB
C
825 lines
25 KiB
C
/*
|
|
USB Driver for GSM modems
|
|
|
|
Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
|
|
|
|
This driver is free software; you can redistribute it and/or modify
|
|
it under the terms of Version 2 of the GNU General Public License as
|
|
published by the Free Software Foundation.
|
|
|
|
Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
|
|
|
|
History: see the git log.
|
|
|
|
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
|
|
|
|
This driver exists because the "normal" serial driver doesn't work too well
|
|
with GSM modems. Issues:
|
|
- data loss -- one single Receive URB is not nearly enough
|
|
- nonstandard flow (Option devices) control
|
|
- controlling the baud rate doesn't make sense
|
|
|
|
This driver is named "option" because the most common device it's
|
|
used for is a PC-Card (with an internal OHCI-USB interface, behind
|
|
which the GSM interface sits), made by Option Inc.
|
|
|
|
Some of the "one port" devices actually exhibit multiple USB instances
|
|
on the USB bus. This is not a bug, these ports are used for different
|
|
device features.
|
|
*/
|
|
|
|
#define DRIVER_VERSION "v0.7.1"
|
|
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
|
|
#define DRIVER_DESC "USB Driver for GSM modems"
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/serial.h>
|
|
|
|
/* Function prototypes */
|
|
static int option_open(struct usb_serial_port *port, struct file *filp);
|
|
static void option_close(struct usb_serial_port *port, struct file *filp);
|
|
static int option_startup(struct usb_serial *serial);
|
|
static void option_shutdown(struct usb_serial *serial);
|
|
static void option_rx_throttle(struct usb_serial_port *port);
|
|
static void option_rx_unthrottle(struct usb_serial_port *port);
|
|
static int option_write_room(struct usb_serial_port *port);
|
|
|
|
static void option_instat_callback(struct urb *urb);
|
|
|
|
static int option_write(struct usb_serial_port *port,
|
|
const unsigned char *buf, int count);
|
|
|
|
static int option_chars_in_buffer(struct usb_serial_port *port);
|
|
static int option_ioctl(struct usb_serial_port *port, struct file *file,
|
|
unsigned int cmd, unsigned long arg);
|
|
static void option_set_termios(struct usb_serial_port *port,
|
|
struct ktermios *old);
|
|
static void option_break_ctl(struct usb_serial_port *port, int break_state);
|
|
static int option_tiocmget(struct usb_serial_port *port, struct file *file);
|
|
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
|
|
unsigned int set, unsigned int clear);
|
|
static int option_send_setup(struct usb_serial_port *port);
|
|
|
|
/* Vendor and product IDs */
|
|
#define OPTION_VENDOR_ID 0x0AF0
|
|
#define OPTION_PRODUCT_COLT 0x5000
|
|
#define OPTION_PRODUCT_RICOLA 0x6000
|
|
#define OPTION_PRODUCT_RICOLA_LIGHT 0x6100
|
|
#define OPTION_PRODUCT_RICOLA_QUAD 0x6200
|
|
#define OPTION_PRODUCT_RICOLA_QUAD_LIGHT 0x6300
|
|
#define OPTION_PRODUCT_RICOLA_NDIS 0x6050
|
|
#define OPTION_PRODUCT_RICOLA_NDIS_LIGHT 0x6150
|
|
#define OPTION_PRODUCT_RICOLA_NDIS_QUAD 0x6250
|
|
#define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT 0x6350
|
|
#define OPTION_PRODUCT_COBRA 0x6500
|
|
#define OPTION_PRODUCT_COBRA_BUS 0x6501
|
|
#define OPTION_PRODUCT_VIPER 0x6600
|
|
#define OPTION_PRODUCT_VIPER_BUS 0x6601
|
|
#define OPTION_PRODUCT_GT_MAX_READY 0x6701
|
|
#define OPTION_PRODUCT_GT_MAX 0x6711
|
|
#define OPTION_PRODUCT_FUJI_MODEM_LIGHT 0x6721
|
|
#define OPTION_PRODUCT_FUJI_MODEM_GT 0x6741
|
|
#define OPTION_PRODUCT_FUJI_MODEM_EX 0x6761
|
|
#define OPTION_PRODUCT_FUJI_NETWORK_LIGHT 0x6731
|
|
#define OPTION_PRODUCT_FUJI_NETWORK_GT 0x6751
|
|
#define OPTION_PRODUCT_FUJI_NETWORK_EX 0x6771
|
|
#define OPTION_PRODUCT_KOI_MODEM 0x6800
|
|
#define OPTION_PRODUCT_KOI_NETWORK 0x6811
|
|
#define OPTION_PRODUCT_SCORPION_MODEM 0x6901
|
|
#define OPTION_PRODUCT_SCORPION_NETWORK 0x6911
|
|
#define OPTION_PRODUCT_ETNA_MODEM 0x7001
|
|
#define OPTION_PRODUCT_ETNA_NETWORK 0x7011
|
|
#define OPTION_PRODUCT_ETNA_MODEM_LITE 0x7021
|
|
#define OPTION_PRODUCT_ETNA_MODEM_GT 0x7041
|
|
#define OPTION_PRODUCT_ETNA_MODEM_EX 0x7061
|
|
#define OPTION_PRODUCT_ETNA_NETWORK_LITE 0x7031
|
|
#define OPTION_PRODUCT_ETNA_NETWORK_GT 0x7051
|
|
#define OPTION_PRODUCT_ETNA_NETWORK_EX 0x7071
|
|
#define OPTION_PRODUCT_ETNA_KOI_MODEM 0x7100
|
|
#define OPTION_PRODUCT_ETNA_KOI_NETWORK 0x7111
|
|
|
|
#define HUAWEI_VENDOR_ID 0x12D1
|
|
#define HUAWEI_PRODUCT_E600 0x1001
|
|
#define HUAWEI_PRODUCT_E220 0x1003
|
|
#define HUAWEI_PRODUCT_E220BIS 0x1004
|
|
|
|
#define NOVATELWIRELESS_VENDOR_ID 0x1410
|
|
#define DELL_VENDOR_ID 0x413C
|
|
|
|
#define ANYDATA_VENDOR_ID 0x16d5
|
|
#define ANYDATA_PRODUCT_ADU_E100A 0x6501
|
|
#define ANYDATA_PRODUCT_ADU_500A 0x6502
|
|
|
|
#define BANDRICH_VENDOR_ID 0x1A8D
|
|
#define BANDRICH_PRODUCT_C100_1 0x1002
|
|
#define BANDRICH_PRODUCT_C100_2 0x1003
|
|
|
|
static struct usb_device_id option_ids[] = {
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_NETWORK) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_NETWORK) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_LITE) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
|
|
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
|
|
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1130) }, /* Novatel Merlin S720 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1400) }, /* Novatel U730 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1410) }, /* Novatel U740 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1420) }, /* Novatel EU870 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2100) }, /* Novatel EV620 CDMA/EV-DO */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
|
|
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
|
|
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
|
|
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
|
|
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, option_ids);
|
|
|
|
static struct usb_driver option_driver = {
|
|
.name = "option",
|
|
.probe = usb_serial_probe,
|
|
.disconnect = usb_serial_disconnect,
|
|
.id_table = option_ids,
|
|
.no_dynamic_id = 1,
|
|
};
|
|
|
|
/* The card has three separate interfaces, which the serial driver
|
|
* recognizes separately, thus num_port=1.
|
|
*/
|
|
|
|
static struct usb_serial_driver option_1port_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "option1",
|
|
},
|
|
.description = "GSM modem (1-port)",
|
|
.usb_driver = &option_driver,
|
|
.id_table = option_ids,
|
|
.num_interrupt_in = NUM_DONT_CARE,
|
|
.num_bulk_in = NUM_DONT_CARE,
|
|
.num_bulk_out = NUM_DONT_CARE,
|
|
.num_ports = 1,
|
|
.open = option_open,
|
|
.close = option_close,
|
|
.write = option_write,
|
|
.write_room = option_write_room,
|
|
.chars_in_buffer = option_chars_in_buffer,
|
|
.throttle = option_rx_throttle,
|
|
.unthrottle = option_rx_unthrottle,
|
|
.ioctl = option_ioctl,
|
|
.set_termios = option_set_termios,
|
|
.break_ctl = option_break_ctl,
|
|
.tiocmget = option_tiocmget,
|
|
.tiocmset = option_tiocmset,
|
|
.attach = option_startup,
|
|
.shutdown = option_shutdown,
|
|
.read_int_callback = option_instat_callback,
|
|
};
|
|
|
|
#ifdef CONFIG_USB_DEBUG
|
|
static int debug;
|
|
#else
|
|
#define debug 0
|
|
#endif
|
|
|
|
/* per port private data */
|
|
|
|
#define N_IN_URB 4
|
|
#define N_OUT_URB 1
|
|
#define IN_BUFLEN 4096
|
|
#define OUT_BUFLEN 128
|
|
|
|
struct option_port_private {
|
|
/* Input endpoints and buffer for this port */
|
|
struct urb *in_urbs[N_IN_URB];
|
|
char in_buffer[N_IN_URB][IN_BUFLEN];
|
|
/* Output endpoints and buffer for this port */
|
|
struct urb *out_urbs[N_OUT_URB];
|
|
char out_buffer[N_OUT_URB][OUT_BUFLEN];
|
|
unsigned long out_busy; /* Bit vector of URBs in use */
|
|
|
|
/* Settings for the port */
|
|
int rts_state; /* Handshaking pins (outputs) */
|
|
int dtr_state;
|
|
int cts_state; /* Handshaking pins (inputs) */
|
|
int dsr_state;
|
|
int dcd_state;
|
|
int ri_state;
|
|
|
|
unsigned long tx_start_time[N_OUT_URB];
|
|
};
|
|
|
|
/* Functions used by new usb-serial code. */
|
|
static int __init option_init(void)
|
|
{
|
|
int retval;
|
|
retval = usb_serial_register(&option_1port_device);
|
|
if (retval)
|
|
goto failed_1port_device_register;
|
|
retval = usb_register(&option_driver);
|
|
if (retval)
|
|
goto failed_driver_register;
|
|
|
|
info(DRIVER_DESC ": " DRIVER_VERSION);
|
|
|
|
return 0;
|
|
|
|
failed_driver_register:
|
|
usb_serial_deregister (&option_1port_device);
|
|
failed_1port_device_register:
|
|
return retval;
|
|
}
|
|
|
|
static void __exit option_exit(void)
|
|
{
|
|
usb_deregister (&option_driver);
|
|
usb_serial_deregister (&option_1port_device);
|
|
}
|
|
|
|
module_init(option_init);
|
|
module_exit(option_exit);
|
|
|
|
static void option_rx_throttle(struct usb_serial_port *port)
|
|
{
|
|
dbg("%s", __FUNCTION__);
|
|
}
|
|
|
|
static void option_rx_unthrottle(struct usb_serial_port *port)
|
|
{
|
|
dbg("%s", __FUNCTION__);
|
|
}
|
|
|
|
static void option_break_ctl(struct usb_serial_port *port, int break_state)
|
|
{
|
|
/* Unfortunately, I don't know how to send a break */
|
|
dbg("%s", __FUNCTION__);
|
|
}
|
|
|
|
static void option_set_termios(struct usb_serial_port *port,
|
|
struct ktermios *old_termios)
|
|
{
|
|
dbg("%s", __FUNCTION__);
|
|
/* Doesn't support option setting */
|
|
tty_termios_copy_hw(port->tty->termios, old_termios);
|
|
option_send_setup(port);
|
|
}
|
|
|
|
static int option_tiocmget(struct usb_serial_port *port, struct file *file)
|
|
{
|
|
unsigned int value;
|
|
struct option_port_private *portdata;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
|
|
((portdata->dtr_state) ? TIOCM_DTR : 0) |
|
|
((portdata->cts_state) ? TIOCM_CTS : 0) |
|
|
((portdata->dsr_state) ? TIOCM_DSR : 0) |
|
|
((portdata->dcd_state) ? TIOCM_CAR : 0) |
|
|
((portdata->ri_state) ? TIOCM_RNG : 0);
|
|
|
|
return value;
|
|
}
|
|
|
|
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct option_port_private *portdata;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
if (set & TIOCM_RTS)
|
|
portdata->rts_state = 1;
|
|
if (set & TIOCM_DTR)
|
|
portdata->dtr_state = 1;
|
|
|
|
if (clear & TIOCM_RTS)
|
|
portdata->rts_state = 0;
|
|
if (clear & TIOCM_DTR)
|
|
portdata->dtr_state = 0;
|
|
return option_send_setup(port);
|
|
}
|
|
|
|
static int option_ioctl(struct usb_serial_port *port, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
/* Write */
|
|
static int option_write(struct usb_serial_port *port,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
int left, todo;
|
|
struct urb *this_urb = NULL; /* spurious */
|
|
int err;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
dbg("%s: write (%d chars)", __FUNCTION__, count);
|
|
|
|
i = 0;
|
|
left = count;
|
|
for (i=0; left > 0 && i < N_OUT_URB; i++) {
|
|
todo = left;
|
|
if (todo > OUT_BUFLEN)
|
|
todo = OUT_BUFLEN;
|
|
|
|
this_urb = portdata->out_urbs[i];
|
|
if (test_and_set_bit(i, &portdata->out_busy)) {
|
|
if (time_before(jiffies,
|
|
portdata->tx_start_time[i] + 10 * HZ))
|
|
continue;
|
|
usb_unlink_urb(this_urb);
|
|
continue;
|
|
}
|
|
if (this_urb->status != 0)
|
|
dbg("usb_write %p failed (err=%d)",
|
|
this_urb, this_urb->status);
|
|
|
|
dbg("%s: endpoint %d buf %d", __FUNCTION__,
|
|
usb_pipeendpoint(this_urb->pipe), i);
|
|
|
|
/* send the data */
|
|
memcpy (this_urb->transfer_buffer, buf, todo);
|
|
this_urb->transfer_buffer_length = todo;
|
|
|
|
this_urb->dev = port->serial->dev;
|
|
err = usb_submit_urb(this_urb, GFP_ATOMIC);
|
|
if (err) {
|
|
dbg("usb_submit_urb %p (write bulk) failed "
|
|
"(%d, has %d)", this_urb,
|
|
err, this_urb->status);
|
|
clear_bit(i, &portdata->out_busy);
|
|
continue;
|
|
}
|
|
portdata->tx_start_time[i] = jiffies;
|
|
buf += todo;
|
|
left -= todo;
|
|
}
|
|
|
|
count -= left;
|
|
dbg("%s: wrote (did %d)", __FUNCTION__, count);
|
|
return count;
|
|
}
|
|
|
|
static void option_indat_callback(struct urb *urb)
|
|
{
|
|
int err;
|
|
int endpoint;
|
|
struct usb_serial_port *port;
|
|
struct tty_struct *tty;
|
|
unsigned char *data = urb->transfer_buffer;
|
|
int status = urb->status;
|
|
|
|
dbg("%s: %p", __FUNCTION__, urb);
|
|
|
|
endpoint = usb_pipeendpoint(urb->pipe);
|
|
port = (struct usb_serial_port *) urb->context;
|
|
|
|
if (status) {
|
|
dbg("%s: nonzero status: %d on endpoint %02x.",
|
|
__FUNCTION__, status, endpoint);
|
|
} else {
|
|
tty = port->tty;
|
|
if (urb->actual_length) {
|
|
tty_buffer_request_room(tty, urb->actual_length);
|
|
tty_insert_flip_string(tty, data, urb->actual_length);
|
|
tty_flip_buffer_push(tty);
|
|
} else {
|
|
dbg("%s: empty read urb received", __FUNCTION__);
|
|
}
|
|
|
|
/* Resubmit urb so we continue receiving */
|
|
if (port->open_count && status != -ESHUTDOWN) {
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err)
|
|
printk(KERN_ERR "%s: resubmit read urb failed. "
|
|
"(%d)", __FUNCTION__, err);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void option_outdat_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
|
|
port = (struct usb_serial_port *) urb->context;
|
|
|
|
usb_serial_port_softint(port);
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
for (i = 0; i < N_OUT_URB; ++i) {
|
|
if (portdata->out_urbs[i] == urb) {
|
|
smp_mb__before_clear_bit();
|
|
clear_bit(i, &portdata->out_busy);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void option_instat_callback(struct urb *urb)
|
|
{
|
|
int err;
|
|
int status = urb->status;
|
|
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
|
|
struct option_port_private *portdata = usb_get_serial_port_data(port);
|
|
struct usb_serial *serial = port->serial;
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
|
|
|
|
if (status == 0) {
|
|
struct usb_ctrlrequest *req_pkt =
|
|
(struct usb_ctrlrequest *)urb->transfer_buffer;
|
|
|
|
if (!req_pkt) {
|
|
dbg("%s: NULL req_pkt\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
if ((req_pkt->bRequestType == 0xA1) &&
|
|
(req_pkt->bRequest == 0x20)) {
|
|
int old_dcd_state;
|
|
unsigned char signals = *((unsigned char *)
|
|
urb->transfer_buffer +
|
|
sizeof(struct usb_ctrlrequest));
|
|
|
|
dbg("%s: signal x%x", __FUNCTION__, signals);
|
|
|
|
old_dcd_state = portdata->dcd_state;
|
|
portdata->cts_state = 1;
|
|
portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
|
|
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
|
|
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
|
|
|
|
if (port->tty && !C_CLOCAL(port->tty) &&
|
|
old_dcd_state && !portdata->dcd_state)
|
|
tty_hangup(port->tty);
|
|
} else {
|
|
dbg("%s: type %x req %x", __FUNCTION__,
|
|
req_pkt->bRequestType,req_pkt->bRequest);
|
|
}
|
|
} else
|
|
dbg("%s: error %d", __FUNCTION__, status);
|
|
|
|
/* Resubmit urb so we continue receiving IRQ data */
|
|
if (status != -ESHUTDOWN) {
|
|
urb->dev = serial->dev;
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err)
|
|
dbg("%s: resubmit intr urb failed. (%d)",
|
|
__FUNCTION__, err);
|
|
}
|
|
}
|
|
|
|
static int option_write_room(struct usb_serial_port *port)
|
|
{
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
int data_len = 0;
|
|
struct urb *this_urb;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
for (i=0; i < N_OUT_URB; i++) {
|
|
this_urb = portdata->out_urbs[i];
|
|
if (this_urb && !test_bit(i, &portdata->out_busy))
|
|
data_len += OUT_BUFLEN;
|
|
}
|
|
|
|
dbg("%s: %d", __FUNCTION__, data_len);
|
|
return data_len;
|
|
}
|
|
|
|
static int option_chars_in_buffer(struct usb_serial_port *port)
|
|
{
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
int data_len = 0;
|
|
struct urb *this_urb;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
for (i=0; i < N_OUT_URB; i++) {
|
|
this_urb = portdata->out_urbs[i];
|
|
if (this_urb && test_bit(i, &portdata->out_busy))
|
|
data_len += this_urb->transfer_buffer_length;
|
|
}
|
|
dbg("%s: %d", __FUNCTION__, data_len);
|
|
return data_len;
|
|
}
|
|
|
|
static int option_open(struct usb_serial_port *port, struct file *filp)
|
|
{
|
|
struct option_port_private *portdata;
|
|
struct usb_serial *serial = port->serial;
|
|
int i, err;
|
|
struct urb *urb;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
|
|
/* Set some sane defaults */
|
|
portdata->rts_state = 1;
|
|
portdata->dtr_state = 1;
|
|
|
|
/* Reset low level data toggle and start reading from endpoints */
|
|
for (i = 0; i < N_IN_URB; i++) {
|
|
urb = portdata->in_urbs[i];
|
|
if (! urb)
|
|
continue;
|
|
if (urb->dev != serial->dev) {
|
|
dbg("%s: dev %p != %p", __FUNCTION__,
|
|
urb->dev, serial->dev);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* make sure endpoint data toggle is synchronized with the
|
|
* device
|
|
*/
|
|
usb_clear_halt(urb->dev, urb->pipe);
|
|
|
|
err = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (err) {
|
|
dbg("%s: submit urb %d failed (%d) %d",
|
|
__FUNCTION__, i, err,
|
|
urb->transfer_buffer_length);
|
|
}
|
|
}
|
|
|
|
/* Reset low level data toggle on out endpoints */
|
|
for (i = 0; i < N_OUT_URB; i++) {
|
|
urb = portdata->out_urbs[i];
|
|
if (! urb)
|
|
continue;
|
|
urb->dev = serial->dev;
|
|
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe), 0); */
|
|
}
|
|
|
|
port->tty->low_latency = 1;
|
|
|
|
option_send_setup(port);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void option_close(struct usb_serial_port *port, struct file *filp)
|
|
{
|
|
int i;
|
|
struct usb_serial *serial = port->serial;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
portdata->rts_state = 0;
|
|
portdata->dtr_state = 0;
|
|
|
|
if (serial->dev) {
|
|
mutex_lock(&serial->disc_mutex);
|
|
if (!serial->disconnected)
|
|
option_send_setup(port);
|
|
mutex_unlock(&serial->disc_mutex);
|
|
|
|
/* Stop reading/writing urbs */
|
|
for (i = 0; i < N_IN_URB; i++)
|
|
usb_kill_urb(portdata->in_urbs[i]);
|
|
for (i = 0; i < N_OUT_URB; i++)
|
|
usb_kill_urb(portdata->out_urbs[i]);
|
|
}
|
|
port->tty = NULL;
|
|
}
|
|
|
|
/* Helper functions used by option_setup_urbs */
|
|
static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
|
|
int dir, void *ctx, char *buf, int len,
|
|
void (*callback)(struct urb *))
|
|
{
|
|
struct urb *urb;
|
|
|
|
if (endpoint == -1)
|
|
return NULL; /* endpoint not needed */
|
|
|
|
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
|
|
if (urb == NULL) {
|
|
dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
|
|
return NULL;
|
|
}
|
|
|
|
/* Fill URB using supplied data. */
|
|
usb_fill_bulk_urb(urb, serial->dev,
|
|
usb_sndbulkpipe(serial->dev, endpoint) | dir,
|
|
buf, len, callback, ctx);
|
|
|
|
return urb;
|
|
}
|
|
|
|
/* Setup urbs */
|
|
static void option_setup_urbs(struct usb_serial *serial)
|
|
{
|
|
int i,j;
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
|
|
for (i = 0; i < serial->num_ports; i++) {
|
|
port = serial->port[i];
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
/* Do indat endpoints first */
|
|
for (j = 0; j < N_IN_URB; ++j) {
|
|
portdata->in_urbs[j] = option_setup_urb (serial,
|
|
port->bulk_in_endpointAddress, USB_DIR_IN, port,
|
|
portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
|
|
}
|
|
|
|
/* outdat endpoints */
|
|
for (j = 0; j < N_OUT_URB; ++j) {
|
|
portdata->out_urbs[j] = option_setup_urb (serial,
|
|
port->bulk_out_endpointAddress, USB_DIR_OUT, port,
|
|
portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int option_send_setup(struct usb_serial_port *port)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
|
|
if (port->number != 0)
|
|
return 0;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
if (port->tty) {
|
|
int val = 0;
|
|
if (portdata->dtr_state)
|
|
val |= 0x01;
|
|
if (portdata->rts_state)
|
|
val |= 0x02;
|
|
|
|
return usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int option_startup(struct usb_serial *serial)
|
|
{
|
|
int i, err;
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
|
|
/* Now setup per port private data */
|
|
for (i = 0; i < serial->num_ports; i++) {
|
|
port = serial->port[i];
|
|
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
|
|
if (!portdata) {
|
|
dbg("%s: kmalloc for option_port_private (%d) failed!.",
|
|
__FUNCTION__, i);
|
|
return (1);
|
|
}
|
|
|
|
usb_set_serial_port_data(port, portdata);
|
|
|
|
if (! port->interrupt_in_urb)
|
|
continue;
|
|
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
|
|
if (err)
|
|
dbg("%s: submit irq_in urb failed %d",
|
|
__FUNCTION__, err);
|
|
}
|
|
|
|
option_setup_urbs(serial);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void option_shutdown(struct usb_serial *serial)
|
|
{
|
|
int i, j;
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __FUNCTION__);
|
|
|
|
/* Stop reading/writing urbs */
|
|
for (i = 0; i < serial->num_ports; ++i) {
|
|
port = serial->port[i];
|
|
portdata = usb_get_serial_port_data(port);
|
|
for (j = 0; j < N_IN_URB; j++)
|
|
usb_kill_urb(portdata->in_urbs[j]);
|
|
for (j = 0; j < N_OUT_URB; j++)
|
|
usb_kill_urb(portdata->out_urbs[j]);
|
|
}
|
|
|
|
/* Now free them */
|
|
for (i = 0; i < serial->num_ports; ++i) {
|
|
port = serial->port[i];
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
for (j = 0; j < N_IN_URB; j++) {
|
|
if (portdata->in_urbs[j]) {
|
|
usb_free_urb(portdata->in_urbs[j]);
|
|
portdata->in_urbs[j] = NULL;
|
|
}
|
|
}
|
|
for (j = 0; j < N_OUT_URB; j++) {
|
|
if (portdata->out_urbs[j]) {
|
|
usb_free_urb(portdata->out_urbs[j]);
|
|
portdata->out_urbs[j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Now free per port private data */
|
|
for (i = 0; i < serial->num_ports; i++) {
|
|
port = serial->port[i];
|
|
kfree(usb_get_serial_port_data(port));
|
|
}
|
|
}
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_VERSION(DRIVER_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#ifdef CONFIG_USB_DEBUG
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug messages");
|
|
#endif
|
|
|