android_kernel_xiaomi_sm8350/arch/ppc/platforms/4xx/ibmnp405h.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

158 lines
5.6 KiB
C

/*
* arch/ppc/platforms/4xx/ibmnp405h.h
*
* Author: Armin Kuster <akuster@mvista.com>
*
* 2002 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_IBMNP405H_H__
#define __ASM_IBMNP405H_H__
#include <linux/config.h>
/* ibm405.h at bottom of this file */
#define PPC405_PCI_CONFIG_ADDR 0xeec00000
#define PPC405_PCI_CONFIG_DATA 0xeec00004
#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
/* setbat */
#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */
#define PPC405_PCI_LOWER_MEM 0x00000000 /* hose_a->mem_space.start */
#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */
#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE
#define PPC4xx_PCI_IO_ADDR ((uint)PPC405_PCI_PHY_IO_BASE)
#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
#define PPC4xx_PCI_CFG_ADDR ((uint)PPC405_PCI_CONFIG_ADDR)
#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
#define PPC4xx_PCI_LCFG_ADDR ((uint)0xef400000)
#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
#define PPC4xx_ONB_IO_ADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
/* serial port defines */
#define RS_TABLE_SIZE 4
#define UART0_INT 0
#define UART1_INT 1
#define PCIL0_BASE 0xEF400000
#define UART0_IO_BASE 0xEF600300
#define UART1_IO_BASE 0xEF600400
#define OPB0_BASE 0xEF600600
#define EMAC0_BASE 0xEF600800
#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base:(u8 *) UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1) \
STD_UART_OP(0)
#endif
/* DCR defines */
/* ------------------------------------------------------------------------- */
#define DCRN_CHCR_BASE 0x0F1
#define DCRN_CHPSR_BASE 0x0B4
#define DCRN_CPMSR_BASE 0x0BA
#define DCRN_CPMFR_BASE 0x0B9
#define DCRN_CPMER_BASE 0x0B8
/* CPM Clocking & Power Mangement defines */
#define IBM_CPM_PCI 0x40000000 /* PCI */
#define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */
#define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */
#define IBM_CPM_EMAC0 0x00800000 /* EMAC 0 MII */
#define IBM_CPM_EMAC1 0x00100000 /* EMAC 1 MII */
#define IBM_CPM_EMMII 0 /* Shift value for MII */
#define IBM_CPM_EMRX 1 /* Shift value for recv */
#define IBM_CPM_EMTX 2 /* Shift value for MAC */
#define IBM_CPM_UIC1 0x00020000 /* Universal Interrupt Controller */
#define IBM_CPM_UIC0 0x00010000 /* Universal Interrupt Controller */
#define IBM_CPM_CPU 0x00008000 /* processor core */
#define IBM_CPM_EBC 0x00004000 /* ROM/SRAM peripheral controller */
#define IBM_CPM_SDRAM0 0x00002000 /* SDRAM memory controller */
#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO (??) */
#define IBM_CPM_HDLC 0x00000800 /* HDCL */
#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */
#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */
#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */
#define IBM_CPM_DMA 0x00000040 /* DMA controller */
#define IBM_CPM_IIC0 0x00000010 /* IIC interface */
#define IBM_CPM_UART0 0x00000002 /* serial port 0 */
#define IBM_CPM_UART1 0x00000001 /* serial port 1 */
/* this is the default setting for devices put to sleep when booting */
#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA \
| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2 \
| IBM_CPM_EMAC3 | IBM_CPM_PCI)
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
#define DCRN_DMA2_BASE 0x110
#define DCRN_DMA3_BASE 0x118
#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
#define DCRN_DMASR_BASE 0x120
#define DCRN_EBC_BASE 0x012
#define DCRN_DCP0_BASE 0x014
#define DCRN_MAL_BASE 0x180
#define DCRN_OCM0_BASE 0x018
#define DCRN_PLB0_BASE 0x084
#define DCRN_PLLMR_BASE 0x0B0
#define DCRN_POB0_BASE 0x0A0
#define DCRN_SDRAM0_BASE 0x010
#define DCRN_UIC0_BASE 0x0C0
#define DCRN_UIC1_BASE 0x0D0
#define DCRN_CPC0_EPRCSR 0x0F3
#define UIC0_UIC1NC 0x00000002
#define CHR1_CETE 0x00000004 /* CPU external timer enable */
#define UIC0 DCRN_UIC0_BASE
#define UIC1 DCRN_UIC1_BASE
#undef NR_UICS
#define NR_UICS 2
/* EMAC DCRN's FIXME: armin */
#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
#include <asm/ibm405.h>
#endif /* __ASM_IBMNP405H_H__ */
#endif /* __KERNEL__ */