..
hdd_config.h
qcacld-3.0: Do not assert on reinit failure
2019-10-29 10:58:37 -07:00
hdd_dp_cfg.h
qcacld-3.0: Fix CFG_RX_MODE_DEFAULT redefined error
2019-10-15 05:16:12 -07:00
qc_sap_ioctl.h
qcacld-3.0: Move sta_info from array based to hash based
2019-10-15 00:48:54 -07:00
wlan_hdd_apf.h
qcacld-3.0: Remove WLAN_WAIT_TIME_APF_GET_CAPS
2019-01-07 08:46:41 -08:00
wlan_hdd_assoc.h
qcacld-3.0: Update HDD for using channel frequency for STA connection
2019-10-26 03:05:44 -07:00
wlan_hdd_bcn_recv.h
qcacld-3.0: Handle BEACON_REPORTING_DO_NOT_RESUME vendor attribute
2019-06-18 07:51:15 -07:00
wlan_hdd_cfg.h
qcacld-3.0: Add operating frequency in hdd_config
2019-09-20 23:36:02 -07:00
wlan_hdd_conc_ut.h
wlan_hdd_data_stall_detection.h
wlan_hdd_debugfs_coex.h
qcacld-3.0: Add support to improve coex logging
2019-03-29 00:47:53 -07:00
wlan_hdd_debugfs_csr.h
qcacld-3.0: Fix markings
2019-02-22 21:23:30 -08:00
wlan_hdd_debugfs_llstat.h
qcacld-3.0: Increase ll_stats driver buffer size
2018-08-02 20:36:03 -07:00
wlan_hdd_debugfs.h
qcacld-3.0: Add debugfs framework support for CSR
2018-09-06 08:54:31 -07:00
wlan_hdd_driver_ops.h
qcacld-3.0: Wait for PM freeze when turning wifi on
2019-09-04 22:23:52 -07:00
wlan_hdd_ether.h
wlan_hdd_ftm.h
wlan_hdd_fw_state.h
qcacld-3.0: Support firmware state check through cfg80211 vendor cmd
2019-03-01 09:23:49 -08:00
wlan_hdd_he.h
qcacld-3.0: Cleanup He cap INI items
2019-01-14 17:32:29 -08:00
wlan_hdd_host_offload.h
qcacld-3.0: Replace multiple IPv4/v6 address len macros with QDF macro
2019-04-16 19:57:47 -07:00
wlan_hdd_includes.h
wlan_hdd_ipa.h
qcacld-3.0: abstract Linux identifiers from IPA component
2019-05-31 02:29:49 -07:00
wlan_hdd_lro.h
qcacld-3.0: Remove obsolete hdd_lro_init() stub
2018-12-06 23:09:57 -08:00
wlan_hdd_main.h
qcacld-3.0: Add 6GHz support for VENDOR_SUBCMD_ACS_POLICY
2019-11-15 02:27:15 -08:00
wlan_hdd_misc.h
qcacld-3.0: add build flag DYNAMIC_SINGLE_CHIP
2019-04-30 22:27:24 -07:00
wlan_hdd_mpta_helper.h
qcacld-3.0: Add MPTA helper support
2019-03-15 07:46:59 -07:00
wlan_hdd_nan.h
qcacld-3.0: Remove unused wlan_hdd_cfg80211_nan_*() stubs
2019-03-07 22:22:42 -08:00
wlan_hdd_napi.h
wlan_hdd_oemdata.h
qcacld-3.0: Convert legacy chan ID usage to chan freq
2019-11-12 02:35:14 -08:00
wlan_hdd_p2p.h
qcacld-3.0: Process rx_mgmt_pkt based on frequency
2019-10-18 02:55:17 -07:00
wlan_hdd_packet_filter_api.h
qcacld-3.0: Use vdev_id in wlan_hdd_set_filter()
2019-02-27 09:55:42 -08:00
wlan_hdd_packet_filter_rules.h
wlan_hdd_power.h
qcacld-3.0: Fix compiler error on UP target
2018-11-06 21:07:41 -08:00
wlan_hdd_regulatory.h
qcacld-3.0: Ignore regulatory offload indication from FW
2019-10-12 19:03:35 -07:00
wlan_hdd_softap_tx_rx.h
qcacld-3.0: Move sta_info from array based to hash based
2019-10-15 00:48:54 -07:00
wlan_hdd_spectralscan.h
qcacld-3.0: Set rx chainmask before start spectral scan
2019-09-14 21:25:56 -07:00
wlan_hdd_sysfs.h
qcacld-3.0: Add Host Driver support for Beacon reception stats
2018-12-11 12:27:05 -08:00
wlan_hdd_tdls.h
qcacld-3.0: Cleanup sta_index in TDLS structures and APIs
2019-10-22 09:05:33 -07:00
wlan_hdd_trace.h
qcacld-3.0: Add mtrace logging for P2P module
2018-09-11 12:01:40 -07:00
wlan_hdd_tsf.h
qcacld-3.0: Add support for gpio based strobe to capture tsf
2019-08-21 00:06:01 -07:00
wlan_hdd_twt.h
qcacld-3.0: Re-enable TWT before host TWT trigger mode
2019-10-09 16:16:43 -07:00
wlan_hdd_tx_rx.h
qcacld-3.0: Add support to flush rx packets for a vdev
2019-11-01 00:17:18 -07:00
wlan_hdd_wext.h
qcacld-3.0: Add support to configure HE SGI for SAP
2019-09-25 04:58:53 -07:00
wlan_hdd_wmm.h
qcacld-3.0: Rename HDD identifier wmmPrevTrafficCnt
2019-03-13 09:31:53 -07:00
wlan_hdd_wowl.h
e83ac29a70