..
include /mach
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
am200epd.c
[ARM] 5200/1: am200epd: use fb notifiers and gpio api
2008-08-26 17:01:14 +01:00
clock.c
clock.h
cm-x2xx-pci.c
[ARM] 5282/1: pxa: add CM-X255 support
2008-10-07 12:05:07 +01:00
cm-x2xx-pci.h
[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
2008-10-07 12:05:05 +01:00
cm-x2xx.c
[ARM] 5282/1: pxa: add CM-X255 support
2008-10-07 12:05:07 +01:00
cm-x255.c
[ARM] 5284/1: pxa: cm-x255: add NOR and NAND flash support
2008-10-07 12:08:14 +01:00
cm-x270.c
[ARM] 5306/1: pxa: fix build error on CM-X270
2008-10-15 12:34:48 +01:00
cm-x300.c
[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
2008-10-07 19:12:57 +01:00
colibri.c
[ARM] pxa/colibri: convert to use new MFP API
2008-09-26 23:43:21 +01:00
corgi_lcd.c
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig
2008-10-21 11:36:19 +08:00
corgi_pm.c
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
corgi_ssp.c
Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-21 09:42:29 +08:00
corgi.c
Merge branch 'pxa-all' into devel
2008-10-09 21:33:02 +01:00
cpufreq-pxa2xx.c
cpufreq: remove policy->governor setting in drivers initialization
2008-10-15 16:42:47 -07:00
cpufreq-pxa3xx.c
cpufreq: remove policy->governor setting in drivers initialization
2008-10-15 16:42:47 -07:00
devices.c
devices.h
[ARM] 5201/1: PXA3xx: Add support for power i2c bus
2008-09-09 16:32:51 +01:00
dma.c
e330.c
e350.c
e400.c
e740.c
e750.c
e800.c
em-x270.c
[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
2008-10-07 19:12:57 +01:00
eseries.c
eseries.h
ezx.c
generic.c
[ARM] ohci-pxa27x: use ioremap() and offset for register access
2008-10-07 19:12:58 +01:00
generic.h
[ARM] pxa: better MFP low power state support for pxa25x/pxa27x
2008-09-26 23:43:20 +01:00
gpio.c
Merge branch 'pxa-all' into devel
2008-10-09 21:33:02 +01:00
gumstix.c
[ARM] 5197/1: gumstix: conversion to MFP support and add bluetooth support
2008-08-26 17:01:27 +01:00
idp.c
[ARM] pxa/idp: remove the unnecessary idp_init_irq()
2008-09-26 23:43:21 +01:00
irq.c
[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15
2008-09-01 17:13:26 +01:00
Kconfig
Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-10-22 19:33:50 +01:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds.c
[ARM] 5251/1: remove old LED support for Trizeps4 SOM
2008-10-01 22:34:34 +01:00
leds.h
littleton.c
[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver
2008-09-23 22:04:38 +01:00
lpd270.c
[ARM] 5298/1: Drop desc_handle_irq()
2008-10-09 15:00:36 +01:00
lubbock.c
[ARM] 5298/1: Drop desc_handle_irq()
2008-10-09 15:00:36 +01:00
magician.c
[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
2008-10-07 19:12:57 +01:00
mainstone.c
[ARM] 5298/1: Drop desc_handle_irq()
2008-10-09 15:00:36 +01:00
Makefile
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig
2008-10-21 11:36:19 +08:00
Makefile.boot
mfp-pxa2xx.c
[ARM] pxa: fix incorrect initialization of mfp sysdev when not pxa2xx
2008-10-07 19:12:55 +01:00
mfp-pxa3xx.c
mioa701_bootresume.S
[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support.
2008-08-26 17:01:37 +01:00
mioa701.c
[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support.
2008-08-26 17:01:37 +01:00
mp900.c
[ARM] 5277/1: Add basic support for MobilePro 900/c
2008-10-02 22:56:05 +01:00
palmtx.c
[ARM] 5248/1: wm97xx generic battery driver
2008-10-02 22:48:34 +01:00
palmz72.c
[ARM] 5239/1: Palm Zire 72 power management support
2008-10-09 15:12:07 +01:00
pcm027.c
[ARM] pxa/pcm027: convert to use new MFP API
2008-09-26 23:43:22 +01:00
pcm990-baseboard.c
[ARM] 5298/1: Drop desc_handle_irq()
2008-10-09 15:00:36 +01:00
pm.c
[ARM] pxa: Allow platforms to override PSPR setting
2008-09-09 16:32:52 +01:00
poodle.c
[ARM] pxa: fix typo in pxa25x MFP definitions
2008-09-26 23:43:20 +01:00
pwm.c
[ARM] 5303/1: period_cycles should be greater than 1
2008-10-17 13:44:47 +01:00
pxa2xx.c
pxa3xx.c
[ARM] 5201/1: PXA3xx: Add support for power i2c bus
2008-09-09 16:32:51 +01:00
pxa25x.c
Merge branches 'pxa-core' and 'pxa-machines' into pxa-all
2008-10-07 19:08:56 +01:00
pxa27x.c
[ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
2008-10-07 19:12:58 +01:00
pxa300.c
pxa320.c
pxa930.c
reset.c
[ARM] 5300/1: fixup spitz reset during boot
2008-10-11 09:52:38 +01:00
saar.c
sharpsl_pm.c
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig
2008-10-21 11:36:19 +08:00
sharpsl.h
sleep.S
smemc.c
spitz_pm.c
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
spitz.c
[ARM] pxa/spitz: fix spi cs on spitz
2008-10-29 11:40:52 +08:00
ssp.c
[ARM] Convert asm/io.h to linux/io.h
2008-09-06 12:10:45 +01:00
standby.S
tavorevb.c
time.c
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
2008-10-11 10:09:45 -07:00
tosa-bt.c
tosa.c
tosa: add support for bl/lcd driver
2008-10-21 00:19:49 +01:00
trizeps4.c
[ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c
2008-10-18 14:24:08 +01:00
viper.c
[ARM] 5308/1: Fix Viper ISA IRQ handling
2008-10-15 13:01:36 +01:00
zylonite_pxa300.c
[ARM] pxa/zylonite: add support for USB OHCI
2008-10-07 19:12:59 +01:00
zylonite_pxa320.c
[ARM] pxa/zylonite: add support for USB OHCI
2008-10-07 19:12:59 +01:00
zylonite.c
[ARM] pxa/zylonite: add support for USB OHCI
2008-10-07 19:12:59 +01:00