2ef3783608
Update myri10ge driver version number to 1.4.3-1.369. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
4047 lines
111 KiB
C
4047 lines
111 KiB
C
/*************************************************************************
|
|
* myri10ge.c: Myricom Myri-10G Ethernet driver.
|
|
*
|
|
* Copyright (C) 2005 - 2007 Myricom, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of Myricom, Inc. nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*
|
|
* If the eeprom on your board is not recent enough, you will need to get a
|
|
* newer firmware image at:
|
|
* http://www.myri.com/scs/download-Myri10GE.html
|
|
*
|
|
* Contact Information:
|
|
* <help@myri.com>
|
|
* Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
|
|
*************************************************************************/
|
|
|
|
#include <linux/tcp.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/string.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/inet_lro.h>
|
|
#include <linux/dca.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/inet.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/io.h>
|
|
#include <linux/log2.h>
|
|
#include <net/checksum.h>
|
|
#include <net/ip.h>
|
|
#include <net/tcp.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#ifdef CONFIG_MTRR
|
|
#include <asm/mtrr.h>
|
|
#endif
|
|
|
|
#include "myri10ge_mcp.h"
|
|
#include "myri10ge_mcp_gen_header.h"
|
|
|
|
#define MYRI10GE_VERSION_STR "1.4.3-1.369"
|
|
|
|
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
|
|
MODULE_AUTHOR("Maintainer: help@myri.com");
|
|
MODULE_VERSION(MYRI10GE_VERSION_STR);
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
#define MYRI10GE_MAX_ETHER_MTU 9014
|
|
|
|
#define MYRI10GE_ETH_STOPPED 0
|
|
#define MYRI10GE_ETH_STOPPING 1
|
|
#define MYRI10GE_ETH_STARTING 2
|
|
#define MYRI10GE_ETH_RUNNING 3
|
|
#define MYRI10GE_ETH_OPEN_FAILED 4
|
|
|
|
#define MYRI10GE_EEPROM_STRINGS_SIZE 256
|
|
#define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
|
|
#define MYRI10GE_MAX_LRO_DESCRIPTORS 8
|
|
#define MYRI10GE_LRO_MAX_PKTS 64
|
|
|
|
#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
|
|
#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
|
|
|
|
#define MYRI10GE_ALLOC_ORDER 0
|
|
#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
|
|
#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
|
|
|
|
#define MYRI10GE_MAX_SLICES 32
|
|
|
|
struct myri10ge_rx_buffer_state {
|
|
struct page *page;
|
|
int page_offset;
|
|
DECLARE_PCI_UNMAP_ADDR(bus)
|
|
DECLARE_PCI_UNMAP_LEN(len)
|
|
};
|
|
|
|
struct myri10ge_tx_buffer_state {
|
|
struct sk_buff *skb;
|
|
int last;
|
|
DECLARE_PCI_UNMAP_ADDR(bus)
|
|
DECLARE_PCI_UNMAP_LEN(len)
|
|
};
|
|
|
|
struct myri10ge_cmd {
|
|
u32 data0;
|
|
u32 data1;
|
|
u32 data2;
|
|
};
|
|
|
|
struct myri10ge_rx_buf {
|
|
struct mcp_kreq_ether_recv __iomem *lanai; /* lanai ptr for recv ring */
|
|
struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
|
|
struct myri10ge_rx_buffer_state *info;
|
|
struct page *page;
|
|
dma_addr_t bus;
|
|
int page_offset;
|
|
int cnt;
|
|
int fill_cnt;
|
|
int alloc_fail;
|
|
int mask; /* number of rx slots -1 */
|
|
int watchdog_needed;
|
|
};
|
|
|
|
struct myri10ge_tx_buf {
|
|
struct mcp_kreq_ether_send __iomem *lanai; /* lanai ptr for sendq */
|
|
__be32 __iomem *send_go; /* "go" doorbell ptr */
|
|
__be32 __iomem *send_stop; /* "stop" doorbell ptr */
|
|
struct mcp_kreq_ether_send *req_list; /* host shadow of sendq */
|
|
char *req_bytes;
|
|
struct myri10ge_tx_buffer_state *info;
|
|
int mask; /* number of transmit slots -1 */
|
|
int req ____cacheline_aligned; /* transmit slots submitted */
|
|
int pkt_start; /* packets started */
|
|
int stop_queue;
|
|
int linearized;
|
|
int done ____cacheline_aligned; /* transmit slots completed */
|
|
int pkt_done; /* packets completed */
|
|
int wake_queue;
|
|
int queue_active;
|
|
};
|
|
|
|
struct myri10ge_rx_done {
|
|
struct mcp_slot *entry;
|
|
dma_addr_t bus;
|
|
int cnt;
|
|
int idx;
|
|
struct net_lro_mgr lro_mgr;
|
|
struct net_lro_desc lro_desc[MYRI10GE_MAX_LRO_DESCRIPTORS];
|
|
};
|
|
|
|
struct myri10ge_slice_netstats {
|
|
unsigned long rx_packets;
|
|
unsigned long tx_packets;
|
|
unsigned long rx_bytes;
|
|
unsigned long tx_bytes;
|
|
unsigned long rx_dropped;
|
|
unsigned long tx_dropped;
|
|
};
|
|
|
|
struct myri10ge_slice_state {
|
|
struct myri10ge_tx_buf tx; /* transmit ring */
|
|
struct myri10ge_rx_buf rx_small;
|
|
struct myri10ge_rx_buf rx_big;
|
|
struct myri10ge_rx_done rx_done;
|
|
struct net_device *dev;
|
|
struct napi_struct napi;
|
|
struct myri10ge_priv *mgp;
|
|
struct myri10ge_slice_netstats stats;
|
|
__be32 __iomem *irq_claim;
|
|
struct mcp_irq_data *fw_stats;
|
|
dma_addr_t fw_stats_bus;
|
|
int watchdog_tx_done;
|
|
int watchdog_tx_req;
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
int cached_dca_tag;
|
|
int cpu;
|
|
__be32 __iomem *dca_tag;
|
|
#endif
|
|
char irq_desc[32];
|
|
};
|
|
|
|
struct myri10ge_priv {
|
|
struct myri10ge_slice_state *ss;
|
|
int tx_boundary; /* boundary transmits cannot cross */
|
|
int num_slices;
|
|
int running; /* running? */
|
|
int csum_flag; /* rx_csums? */
|
|
int small_bytes;
|
|
int big_bytes;
|
|
int max_intr_slots;
|
|
struct net_device *dev;
|
|
struct net_device_stats stats;
|
|
spinlock_t stats_lock;
|
|
u8 __iomem *sram;
|
|
int sram_size;
|
|
unsigned long board_span;
|
|
unsigned long iomem_base;
|
|
__be32 __iomem *irq_deassert;
|
|
char *mac_addr_string;
|
|
struct mcp_cmd_response *cmd;
|
|
dma_addr_t cmd_bus;
|
|
struct pci_dev *pdev;
|
|
int msi_enabled;
|
|
int msix_enabled;
|
|
struct msix_entry *msix_vectors;
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
int dca_enabled;
|
|
#endif
|
|
u32 link_state;
|
|
unsigned int rdma_tags_available;
|
|
int intr_coal_delay;
|
|
__be32 __iomem *intr_coal_delay_ptr;
|
|
int mtrr;
|
|
int wc_enabled;
|
|
int down_cnt;
|
|
wait_queue_head_t down_wq;
|
|
struct work_struct watchdog_work;
|
|
struct timer_list watchdog_timer;
|
|
int watchdog_resets;
|
|
int watchdog_pause;
|
|
int pause;
|
|
char *fw_name;
|
|
char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
|
|
char *product_code_string;
|
|
char fw_version[128];
|
|
int fw_ver_major;
|
|
int fw_ver_minor;
|
|
int fw_ver_tiny;
|
|
int adopted_rx_filter_bug;
|
|
u8 mac_addr[6]; /* eeprom mac address */
|
|
unsigned long serial_number;
|
|
int vendor_specific_offset;
|
|
int fw_multicast_support;
|
|
unsigned long features;
|
|
u32 max_tso6;
|
|
u32 read_dma;
|
|
u32 write_dma;
|
|
u32 read_write_dma;
|
|
u32 link_changes;
|
|
u32 msg_enable;
|
|
};
|
|
|
|
static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
|
|
static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
|
|
static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
|
|
static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
|
|
|
|
static char *myri10ge_fw_name = NULL;
|
|
module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
|
|
|
|
static int myri10ge_ecrc_enable = 1;
|
|
module_param(myri10ge_ecrc_enable, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
|
|
|
|
static int myri10ge_small_bytes = -1; /* -1 == auto */
|
|
module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
|
|
|
|
static int myri10ge_msi = 1; /* enable msi by default */
|
|
module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
|
|
|
|
static int myri10ge_intr_coal_delay = 75;
|
|
module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
|
|
|
|
static int myri10ge_flow_control = 1;
|
|
module_param(myri10ge_flow_control, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
|
|
|
|
static int myri10ge_deassert_wait = 1;
|
|
module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(myri10ge_deassert_wait,
|
|
"Wait when deasserting legacy interrupts");
|
|
|
|
static int myri10ge_force_firmware = 0;
|
|
module_param(myri10ge_force_firmware, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_force_firmware,
|
|
"Force firmware to assume aligned completions");
|
|
|
|
static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
|
|
module_param(myri10ge_initial_mtu, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
|
|
|
|
static int myri10ge_napi_weight = 64;
|
|
module_param(myri10ge_napi_weight, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
|
|
|
|
static int myri10ge_watchdog_timeout = 1;
|
|
module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
|
|
|
|
static int myri10ge_max_irq_loops = 1048576;
|
|
module_param(myri10ge_max_irq_loops, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_max_irq_loops,
|
|
"Set stuck legacy IRQ detection threshold");
|
|
|
|
#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
|
|
|
|
static int myri10ge_debug = -1; /* defaults above */
|
|
module_param(myri10ge_debug, int, 0);
|
|
MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
|
|
|
|
static int myri10ge_lro = 1;
|
|
module_param(myri10ge_lro, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload");
|
|
|
|
static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
|
|
module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_lro_max_pkts,
|
|
"Number of LRO packets to be aggregated");
|
|
|
|
static int myri10ge_fill_thresh = 256;
|
|
module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
|
|
|
|
static int myri10ge_reset_recover = 1;
|
|
|
|
static int myri10ge_max_slices = 1;
|
|
module_param(myri10ge_max_slices, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
|
|
|
|
static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
|
|
module_param(myri10ge_rss_hash, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
|
|
|
|
static int myri10ge_dca = 1;
|
|
module_param(myri10ge_dca, int, S_IRUGO);
|
|
MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
|
|
|
|
#define MYRI10GE_FW_OFFSET 1024*1024
|
|
#define MYRI10GE_HIGHPART_TO_U32(X) \
|
|
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
|
|
#define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
|
|
|
|
#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
|
|
|
|
static void myri10ge_set_multicast_list(struct net_device *dev);
|
|
static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev);
|
|
|
|
static inline void put_be32(__be32 val, __be32 __iomem * p)
|
|
{
|
|
__raw_writel((__force __u32) val, (__force void __iomem *)p);
|
|
}
|
|
|
|
static int
|
|
myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
|
|
struct myri10ge_cmd *data, int atomic)
|
|
{
|
|
struct mcp_cmd *buf;
|
|
char buf_bytes[sizeof(*buf) + 8];
|
|
struct mcp_cmd_response *response = mgp->cmd;
|
|
char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
|
|
u32 dma_low, dma_high, result, value;
|
|
int sleep_total = 0;
|
|
|
|
/* ensure buf is aligned to 8 bytes */
|
|
buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
|
|
|
|
buf->data0 = htonl(data->data0);
|
|
buf->data1 = htonl(data->data1);
|
|
buf->data2 = htonl(data->data2);
|
|
buf->cmd = htonl(cmd);
|
|
dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
|
|
dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
|
|
|
|
buf->response_addr.low = htonl(dma_low);
|
|
buf->response_addr.high = htonl(dma_high);
|
|
response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
|
|
mb();
|
|
myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
|
|
|
|
/* wait up to 15ms. Longest command is the DMA benchmark,
|
|
* which is capped at 5ms, but runs from a timeout handler
|
|
* that runs every 7.8ms. So a 15ms timeout leaves us with
|
|
* a 2.2ms margin
|
|
*/
|
|
if (atomic) {
|
|
/* if atomic is set, do not sleep,
|
|
* and try to get the completion quickly
|
|
* (1ms will be enough for those commands) */
|
|
for (sleep_total = 0;
|
|
sleep_total < 1000
|
|
&& response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
|
|
sleep_total += 10) {
|
|
udelay(10);
|
|
mb();
|
|
}
|
|
} else {
|
|
/* use msleep for most command */
|
|
for (sleep_total = 0;
|
|
sleep_total < 15
|
|
&& response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
|
|
sleep_total++)
|
|
msleep(1);
|
|
}
|
|
|
|
result = ntohl(response->result);
|
|
value = ntohl(response->data);
|
|
if (result != MYRI10GE_NO_RESPONSE_RESULT) {
|
|
if (result == 0) {
|
|
data->data0 = value;
|
|
return 0;
|
|
} else if (result == MXGEFW_CMD_UNKNOWN) {
|
|
return -ENOSYS;
|
|
} else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
|
|
return -E2BIG;
|
|
} else if (result == MXGEFW_CMD_ERROR_RANGE &&
|
|
cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
|
|
(data->
|
|
data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
|
|
0) {
|
|
return -ERANGE;
|
|
} else {
|
|
dev_err(&mgp->pdev->dev,
|
|
"command %d failed, result = %d\n",
|
|
cmd, result);
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
|
|
cmd, result);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* The eeprom strings on the lanaiX have the format
|
|
* SN=x\0
|
|
* MAC=x:x:x:x:x:x\0
|
|
* PT:ddd mmm xx xx:xx:xx xx\0
|
|
* PV:ddd mmm xx xx:xx:xx xx\0
|
|
*/
|
|
static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
|
|
{
|
|
char *ptr, *limit;
|
|
int i;
|
|
|
|
ptr = mgp->eeprom_strings;
|
|
limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
|
|
|
|
while (*ptr != '\0' && ptr < limit) {
|
|
if (memcmp(ptr, "MAC=", 4) == 0) {
|
|
ptr += 4;
|
|
mgp->mac_addr_string = ptr;
|
|
for (i = 0; i < 6; i++) {
|
|
if ((ptr + 2) > limit)
|
|
goto abort;
|
|
mgp->mac_addr[i] =
|
|
simple_strtoul(ptr, &ptr, 16);
|
|
ptr += 1;
|
|
}
|
|
}
|
|
if (memcmp(ptr, "PC=", 3) == 0) {
|
|
ptr += 3;
|
|
mgp->product_code_string = ptr;
|
|
}
|
|
if (memcmp((const void *)ptr, "SN=", 3) == 0) {
|
|
ptr += 3;
|
|
mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
|
|
}
|
|
while (ptr < limit && *ptr++) ;
|
|
}
|
|
|
|
return 0;
|
|
|
|
abort:
|
|
dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/*
|
|
* Enable or disable periodic RDMAs from the host to make certain
|
|
* chipsets resend dropped PCIe messages
|
|
*/
|
|
|
|
static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
|
|
{
|
|
char __iomem *submit;
|
|
__be32 buf[16] __attribute__ ((__aligned__(8)));
|
|
u32 dma_low, dma_high;
|
|
int i;
|
|
|
|
/* clear confirmation addr */
|
|
mgp->cmd->data = 0;
|
|
mb();
|
|
|
|
/* send a rdma command to the PCIe engine, and wait for the
|
|
* response in the confirmation address. The firmware should
|
|
* write a -1 there to indicate it is alive and well
|
|
*/
|
|
dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
|
|
dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
|
|
|
|
buf[0] = htonl(dma_high); /* confirm addr MSW */
|
|
buf[1] = htonl(dma_low); /* confirm addr LSW */
|
|
buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
|
|
buf[3] = htonl(dma_high); /* dummy addr MSW */
|
|
buf[4] = htonl(dma_low); /* dummy addr LSW */
|
|
buf[5] = htonl(enable); /* enable? */
|
|
|
|
submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
|
|
|
|
myri10ge_pio_copy(submit, &buf, sizeof(buf));
|
|
for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
|
|
msleep(1);
|
|
if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
|
|
dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
|
|
(enable ? "enable" : "disable"));
|
|
}
|
|
|
|
static int
|
|
myri10ge_validate_firmware(struct myri10ge_priv *mgp,
|
|
struct mcp_gen_header *hdr)
|
|
{
|
|
struct device *dev = &mgp->pdev->dev;
|
|
|
|
/* check firmware type */
|
|
if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
|
|
dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* save firmware version for ethtool */
|
|
strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
|
|
|
|
sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
|
|
&mgp->fw_ver_minor, &mgp->fw_ver_tiny);
|
|
|
|
if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR
|
|
&& mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
|
|
dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
|
|
dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
|
|
MXGEFW_VERSION_MINOR);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
|
|
{
|
|
unsigned crc, reread_crc;
|
|
const struct firmware *fw;
|
|
struct device *dev = &mgp->pdev->dev;
|
|
unsigned char *fw_readback;
|
|
struct mcp_gen_header *hdr;
|
|
size_t hdr_offset;
|
|
int status;
|
|
unsigned i;
|
|
|
|
if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
|
|
dev_err(dev, "Unable to load %s firmware image via hotplug\n",
|
|
mgp->fw_name);
|
|
status = -EINVAL;
|
|
goto abort_with_nothing;
|
|
}
|
|
|
|
/* check size */
|
|
|
|
if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
|
|
fw->size < MCP_HEADER_PTR_OFFSET + 4) {
|
|
dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
|
|
status = -EINVAL;
|
|
goto abort_with_fw;
|
|
}
|
|
|
|
/* check id */
|
|
hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
|
|
dev_err(dev, "Bad firmware file\n");
|
|
status = -EINVAL;
|
|
goto abort_with_fw;
|
|
}
|
|
hdr = (void *)(fw->data + hdr_offset);
|
|
|
|
status = myri10ge_validate_firmware(mgp, hdr);
|
|
if (status != 0)
|
|
goto abort_with_fw;
|
|
|
|
crc = crc32(~0, fw->data, fw->size);
|
|
for (i = 0; i < fw->size; i += 256) {
|
|
myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
|
|
fw->data + i,
|
|
min(256U, (unsigned)(fw->size - i)));
|
|
mb();
|
|
readb(mgp->sram);
|
|
}
|
|
fw_readback = vmalloc(fw->size);
|
|
if (!fw_readback) {
|
|
status = -ENOMEM;
|
|
goto abort_with_fw;
|
|
}
|
|
/* corruption checking is good for parity recovery and buggy chipset */
|
|
memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
|
|
reread_crc = crc32(~0, fw_readback, fw->size);
|
|
vfree(fw_readback);
|
|
if (crc != reread_crc) {
|
|
dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
|
|
(unsigned)fw->size, reread_crc, crc);
|
|
status = -EIO;
|
|
goto abort_with_fw;
|
|
}
|
|
*size = (u32) fw->size;
|
|
|
|
abort_with_fw:
|
|
release_firmware(fw);
|
|
|
|
abort_with_nothing:
|
|
return status;
|
|
}
|
|
|
|
static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
|
|
{
|
|
struct mcp_gen_header *hdr;
|
|
struct device *dev = &mgp->pdev->dev;
|
|
const size_t bytes = sizeof(struct mcp_gen_header);
|
|
size_t hdr_offset;
|
|
int status;
|
|
|
|
/* find running firmware header */
|
|
hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
|
|
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
|
|
dev_err(dev, "Running firmware has bad header offset (%d)\n",
|
|
(int)hdr_offset);
|
|
return -EIO;
|
|
}
|
|
|
|
/* copy header of running firmware from SRAM to host memory to
|
|
* validate firmware */
|
|
hdr = kmalloc(bytes, GFP_KERNEL);
|
|
if (hdr == NULL) {
|
|
dev_err(dev, "could not malloc firmware hdr\n");
|
|
return -ENOMEM;
|
|
}
|
|
memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
|
|
status = myri10ge_validate_firmware(mgp, hdr);
|
|
kfree(hdr);
|
|
|
|
/* check to see if adopted firmware has bug where adopting
|
|
* it will cause broadcasts to be filtered unless the NIC
|
|
* is kept in ALLMULTI mode */
|
|
if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
|
|
mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
|
|
mgp->adopted_rx_filter_bug = 1;
|
|
dev_warn(dev, "Adopting fw %d.%d.%d: "
|
|
"working around rx filter bug\n",
|
|
mgp->fw_ver_major, mgp->fw_ver_minor,
|
|
mgp->fw_ver_tiny);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
int status;
|
|
|
|
/* probe for IPv6 TSO support */
|
|
mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
|
|
&cmd, 0);
|
|
if (status == 0) {
|
|
mgp->max_tso6 = cmd.data0;
|
|
mgp->features |= NETIF_F_TSO6;
|
|
}
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev,
|
|
"failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
|
|
{
|
|
char __iomem *submit;
|
|
__be32 buf[16] __attribute__ ((__aligned__(8)));
|
|
u32 dma_low, dma_high, size;
|
|
int status, i;
|
|
|
|
size = 0;
|
|
status = myri10ge_load_hotplug_firmware(mgp, &size);
|
|
if (status) {
|
|
if (!adopt)
|
|
return status;
|
|
dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
|
|
|
|
/* Do not attempt to adopt firmware if there
|
|
* was a bad crc */
|
|
if (status == -EIO)
|
|
return status;
|
|
|
|
status = myri10ge_adopt_running_firmware(mgp);
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev,
|
|
"failed to adopt running firmware\n");
|
|
return status;
|
|
}
|
|
dev_info(&mgp->pdev->dev,
|
|
"Successfully adopted running firmware\n");
|
|
if (mgp->tx_boundary == 4096) {
|
|
dev_warn(&mgp->pdev->dev,
|
|
"Using firmware currently running on NIC"
|
|
". For optimal\n");
|
|
dev_warn(&mgp->pdev->dev,
|
|
"performance consider loading optimized "
|
|
"firmware\n");
|
|
dev_warn(&mgp->pdev->dev, "via hotplug\n");
|
|
}
|
|
|
|
mgp->fw_name = "adopted";
|
|
mgp->tx_boundary = 2048;
|
|
myri10ge_dummy_rdma(mgp, 1);
|
|
status = myri10ge_get_firmware_capabilities(mgp);
|
|
return status;
|
|
}
|
|
|
|
/* clear confirmation addr */
|
|
mgp->cmd->data = 0;
|
|
mb();
|
|
|
|
/* send a reload command to the bootstrap MCP, and wait for the
|
|
* response in the confirmation address. The firmware should
|
|
* write a -1 there to indicate it is alive and well
|
|
*/
|
|
dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
|
|
dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
|
|
|
|
buf[0] = htonl(dma_high); /* confirm addr MSW */
|
|
buf[1] = htonl(dma_low); /* confirm addr LSW */
|
|
buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
|
|
|
|
/* FIX: All newest firmware should un-protect the bottom of
|
|
* the sram before handoff. However, the very first interfaces
|
|
* do not. Therefore the handoff copy must skip the first 8 bytes
|
|
*/
|
|
buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
|
|
buf[4] = htonl(size - 8); /* length of code */
|
|
buf[5] = htonl(8); /* where to copy to */
|
|
buf[6] = htonl(0); /* where to jump to */
|
|
|
|
submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
|
|
|
|
myri10ge_pio_copy(submit, &buf, sizeof(buf));
|
|
mb();
|
|
msleep(1);
|
|
mb();
|
|
i = 0;
|
|
while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
|
|
msleep(1 << i);
|
|
i++;
|
|
}
|
|
if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
|
|
dev_err(&mgp->pdev->dev, "handoff failed\n");
|
|
return -ENXIO;
|
|
}
|
|
myri10ge_dummy_rdma(mgp, 1);
|
|
status = myri10ge_get_firmware_capabilities(mgp);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
int status;
|
|
|
|
cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
|
|
| (addr[2] << 8) | addr[3]);
|
|
|
|
cmd.data1 = ((addr[4] << 8) | (addr[5]));
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
|
|
return status;
|
|
}
|
|
|
|
static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
int status, ctl;
|
|
|
|
ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
|
|
status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
|
|
|
|
if (status) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: Failed to set flow control mode\n",
|
|
mgp->dev->name);
|
|
return status;
|
|
}
|
|
mgp->pause = pause;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
int status, ctl;
|
|
|
|
ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
|
|
status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
|
|
if (status)
|
|
printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
|
|
mgp->dev->name);
|
|
}
|
|
|
|
static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
int status;
|
|
u32 len;
|
|
struct page *dmatest_page;
|
|
dma_addr_t dmatest_bus;
|
|
char *test = " ";
|
|
|
|
dmatest_page = alloc_page(GFP_KERNEL);
|
|
if (!dmatest_page)
|
|
return -ENOMEM;
|
|
dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
/* Run a small DMA test.
|
|
* The magic multipliers to the length tell the firmware
|
|
* to do DMA read, write, or read+write tests. The
|
|
* results are returned in cmd.data0. The upper 16
|
|
* bits or the return is the number of transfers completed.
|
|
* The lower 16 bits is the time in 0.5us ticks that the
|
|
* transfers took to complete.
|
|
*/
|
|
|
|
len = mgp->tx_boundary;
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
|
|
cmd.data2 = len * 0x10000;
|
|
status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
|
|
if (status != 0) {
|
|
test = "read";
|
|
goto abort;
|
|
}
|
|
mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
|
|
cmd.data2 = len * 0x1;
|
|
status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
|
|
if (status != 0) {
|
|
test = "write";
|
|
goto abort;
|
|
}
|
|
mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
|
|
cmd.data2 = len * 0x10001;
|
|
status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
|
|
if (status != 0) {
|
|
test = "read/write";
|
|
goto abort;
|
|
}
|
|
mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
|
|
(cmd.data0 & 0xffff);
|
|
|
|
abort:
|
|
pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
|
|
put_page(dmatest_page);
|
|
|
|
if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
|
|
dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
|
|
test, status);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int myri10ge_reset(struct myri10ge_priv *mgp)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
struct myri10ge_slice_state *ss;
|
|
int i, status;
|
|
size_t bytes;
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
unsigned long dca_tag_off;
|
|
#endif
|
|
|
|
/* try to send a reset command to the card to see if it
|
|
* is alive */
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev, "failed reset\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
(void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
|
|
/*
|
|
* Use non-ndis mcp_slot (eg, 4 bytes total,
|
|
* no toeplitz hash value returned. Older firmware will
|
|
* not understand this command, but will use the correct
|
|
* sized mcp_slot, so we ignore error returns
|
|
*/
|
|
cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
|
|
(void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
|
|
|
|
/* Now exchange information about interrupts */
|
|
|
|
bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
|
|
cmd.data0 = (u32) bytes;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
|
|
|
|
/*
|
|
* Even though we already know how many slices are supported
|
|
* via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
|
|
* has magic side effects, and must be called after a reset.
|
|
* It must be called prior to calling any RSS related cmds,
|
|
* including assigning an interrupt queue for anything but
|
|
* slice 0. It must also be called *after*
|
|
* MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
|
|
* the firmware to compute offsets.
|
|
*/
|
|
|
|
if (mgp->num_slices > 1) {
|
|
|
|
/* ask the maximum number of slices it supports */
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
|
|
&cmd, 0);
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev,
|
|
"failed to get number of slices\n");
|
|
}
|
|
|
|
/*
|
|
* MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
|
|
* to setting up the interrupt queue DMA
|
|
*/
|
|
|
|
cmd.data0 = mgp->num_slices;
|
|
cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
|
|
if (mgp->dev->real_num_tx_queues > 1)
|
|
cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
|
|
&cmd, 0);
|
|
|
|
/* Firmware older than 1.4.32 only supports multiple
|
|
* RX queues, so if we get an error, first retry using a
|
|
* single TX queue before giving up */
|
|
if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
|
|
mgp->dev->real_num_tx_queues = 1;
|
|
cmd.data0 = mgp->num_slices;
|
|
cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
|
|
status = myri10ge_send_cmd(mgp,
|
|
MXGEFW_CMD_ENABLE_RSS_QUEUES,
|
|
&cmd, 0);
|
|
}
|
|
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev,
|
|
"failed to set number of slices\n");
|
|
|
|
return status;
|
|
}
|
|
}
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
ss = &mgp->ss[i];
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
|
|
cmd.data2 = i;
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
|
|
&cmd, 0);
|
|
};
|
|
|
|
status |=
|
|
myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
ss = &mgp->ss[i];
|
|
ss->irq_claim =
|
|
(__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
|
|
}
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
|
|
&cmd, 0);
|
|
mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
|
|
|
|
status |= myri10ge_send_cmd
|
|
(mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
|
|
mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
|
|
return status;
|
|
}
|
|
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
|
|
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
|
|
dca_tag_off = cmd.data0;
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
ss = &mgp->ss[i];
|
|
if (status == 0) {
|
|
ss->dca_tag = (__iomem __be32 *)
|
|
(mgp->sram + dca_tag_off + 4 * i);
|
|
} else {
|
|
ss->dca_tag = NULL;
|
|
}
|
|
}
|
|
#endif /* CONFIG_DCA */
|
|
|
|
/* reset mcp/driver shared state back to 0 */
|
|
|
|
mgp->link_changes = 0;
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
ss = &mgp->ss[i];
|
|
|
|
memset(ss->rx_done.entry, 0, bytes);
|
|
ss->tx.req = 0;
|
|
ss->tx.done = 0;
|
|
ss->tx.pkt_start = 0;
|
|
ss->tx.pkt_done = 0;
|
|
ss->rx_big.cnt = 0;
|
|
ss->rx_small.cnt = 0;
|
|
ss->rx_done.idx = 0;
|
|
ss->rx_done.cnt = 0;
|
|
ss->tx.wake_queue = 0;
|
|
ss->tx.stop_queue = 0;
|
|
}
|
|
|
|
status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
|
|
myri10ge_change_pause(mgp, mgp->pause);
|
|
myri10ge_set_multicast_list(mgp->dev);
|
|
return status;
|
|
}
|
|
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
static void
|
|
myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
|
|
{
|
|
ss->cpu = cpu;
|
|
ss->cached_dca_tag = tag;
|
|
put_be32(htonl(tag), ss->dca_tag);
|
|
}
|
|
|
|
static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
|
|
{
|
|
int cpu = get_cpu();
|
|
int tag;
|
|
|
|
if (cpu != ss->cpu) {
|
|
tag = dca_get_tag(cpu);
|
|
if (ss->cached_dca_tag != tag)
|
|
myri10ge_write_dca(ss, cpu, tag);
|
|
}
|
|
put_cpu();
|
|
}
|
|
|
|
static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
|
|
{
|
|
int err, i;
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
|
|
if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
|
|
return;
|
|
if (!myri10ge_dca) {
|
|
dev_err(&pdev->dev, "dca disabled by administrator\n");
|
|
return;
|
|
}
|
|
err = dca_add_requester(&pdev->dev);
|
|
if (err) {
|
|
if (err != -ENODEV)
|
|
dev_err(&pdev->dev,
|
|
"dca_add_requester() failed, err=%d\n", err);
|
|
return;
|
|
}
|
|
mgp->dca_enabled = 1;
|
|
for (i = 0; i < mgp->num_slices; i++)
|
|
myri10ge_write_dca(&mgp->ss[i], -1, 0);
|
|
}
|
|
|
|
static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
|
|
{
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
int err;
|
|
|
|
if (!mgp->dca_enabled)
|
|
return;
|
|
mgp->dca_enabled = 0;
|
|
err = dca_remove_requester(&pdev->dev);
|
|
}
|
|
|
|
static int myri10ge_notify_dca_device(struct device *dev, void *data)
|
|
{
|
|
struct myri10ge_priv *mgp;
|
|
unsigned long event;
|
|
|
|
mgp = dev_get_drvdata(dev);
|
|
event = *(unsigned long *)data;
|
|
|
|
if (event == DCA_PROVIDER_ADD)
|
|
myri10ge_setup_dca(mgp);
|
|
else if (event == DCA_PROVIDER_REMOVE)
|
|
myri10ge_teardown_dca(mgp);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_DCA */
|
|
|
|
static inline void
|
|
myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
|
|
struct mcp_kreq_ether_recv *src)
|
|
{
|
|
__be32 low;
|
|
|
|
low = src->addr_low;
|
|
src->addr_low = htonl(DMA_32BIT_MASK);
|
|
myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
|
|
mb();
|
|
myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
|
|
mb();
|
|
src->addr_low = low;
|
|
put_be32(low, &dst->addr_low);
|
|
mb();
|
|
}
|
|
|
|
static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
|
|
{
|
|
struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
|
|
|
|
if ((skb->protocol == htons(ETH_P_8021Q)) &&
|
|
(vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
|
|
vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
|
|
skb->csum = hw_csum;
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
|
|
struct skb_frag_struct *rx_frags, int len, int hlen)
|
|
{
|
|
struct skb_frag_struct *skb_frags;
|
|
|
|
skb->len = skb->data_len = len;
|
|
skb->truesize = len + sizeof(struct sk_buff);
|
|
/* attach the page(s) */
|
|
|
|
skb_frags = skb_shinfo(skb)->frags;
|
|
while (len > 0) {
|
|
memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
|
|
len -= rx_frags->size;
|
|
skb_frags++;
|
|
rx_frags++;
|
|
skb_shinfo(skb)->nr_frags++;
|
|
}
|
|
|
|
/* pskb_may_pull is not available in irq context, but
|
|
* skb_pull() (for ether_pad and eth_type_trans()) requires
|
|
* the beginning of the packet in skb_headlen(), move it
|
|
* manually */
|
|
skb_copy_to_linear_data(skb, va, hlen);
|
|
skb_shinfo(skb)->frags[0].page_offset += hlen;
|
|
skb_shinfo(skb)->frags[0].size -= hlen;
|
|
skb->data_len -= hlen;
|
|
skb->tail += hlen;
|
|
skb_pull(skb, MXGEFW_PAD);
|
|
}
|
|
|
|
static void
|
|
myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
|
|
int bytes, int watchdog)
|
|
{
|
|
struct page *page;
|
|
int idx;
|
|
|
|
if (unlikely(rx->watchdog_needed && !watchdog))
|
|
return;
|
|
|
|
/* try to refill entire ring */
|
|
while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
|
|
idx = rx->fill_cnt & rx->mask;
|
|
if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
|
|
/* we can use part of previous page */
|
|
get_page(rx->page);
|
|
} else {
|
|
/* we need a new page */
|
|
page =
|
|
alloc_pages(GFP_ATOMIC | __GFP_COMP,
|
|
MYRI10GE_ALLOC_ORDER);
|
|
if (unlikely(page == NULL)) {
|
|
if (rx->fill_cnt - rx->cnt < 16)
|
|
rx->watchdog_needed = 1;
|
|
return;
|
|
}
|
|
rx->page = page;
|
|
rx->page_offset = 0;
|
|
rx->bus = pci_map_page(mgp->pdev, page, 0,
|
|
MYRI10GE_ALLOC_SIZE,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
rx->info[idx].page = rx->page;
|
|
rx->info[idx].page_offset = rx->page_offset;
|
|
/* note that this is the address of the start of the
|
|
* page */
|
|
pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
|
|
rx->shadow[idx].addr_low =
|
|
htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
|
|
rx->shadow[idx].addr_high =
|
|
htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
|
|
|
|
/* start next packet on a cacheline boundary */
|
|
rx->page_offset += SKB_DATA_ALIGN(bytes);
|
|
|
|
#if MYRI10GE_ALLOC_SIZE > 4096
|
|
/* don't cross a 4KB boundary */
|
|
if ((rx->page_offset >> 12) !=
|
|
((rx->page_offset + bytes - 1) >> 12))
|
|
rx->page_offset = (rx->page_offset + 4096) & ~4095;
|
|
#endif
|
|
rx->fill_cnt++;
|
|
|
|
/* copy 8 descriptors to the firmware at a time */
|
|
if ((idx & 7) == 7) {
|
|
myri10ge_submit_8rx(&rx->lanai[idx - 7],
|
|
&rx->shadow[idx - 7]);
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
myri10ge_unmap_rx_page(struct pci_dev *pdev,
|
|
struct myri10ge_rx_buffer_state *info, int bytes)
|
|
{
|
|
/* unmap the recvd page if we're the only or last user of it */
|
|
if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
|
|
(info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
|
|
pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
|
|
& ~(MYRI10GE_ALLOC_SIZE - 1)),
|
|
MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
|
|
}
|
|
}
|
|
|
|
#define MYRI10GE_HLEN 64 /* The number of bytes to copy from a
|
|
* page into an skb */
|
|
|
|
static inline int
|
|
myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
|
|
int bytes, int len, __wsum csum)
|
|
{
|
|
struct myri10ge_priv *mgp = ss->mgp;
|
|
struct sk_buff *skb;
|
|
struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
|
|
int i, idx, hlen, remainder;
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
struct net_device *dev = mgp->dev;
|
|
u8 *va;
|
|
|
|
len += MXGEFW_PAD;
|
|
idx = rx->cnt & rx->mask;
|
|
va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
|
|
prefetch(va);
|
|
/* Fill skb_frag_struct(s) with data from our receive */
|
|
for (i = 0, remainder = len; remainder > 0; i++) {
|
|
myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
|
|
rx_frags[i].page = rx->info[idx].page;
|
|
rx_frags[i].page_offset = rx->info[idx].page_offset;
|
|
if (remainder < MYRI10GE_ALLOC_SIZE)
|
|
rx_frags[i].size = remainder;
|
|
else
|
|
rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
|
|
rx->cnt++;
|
|
idx = rx->cnt & rx->mask;
|
|
remainder -= MYRI10GE_ALLOC_SIZE;
|
|
}
|
|
|
|
if (mgp->csum_flag && myri10ge_lro) {
|
|
rx_frags[0].page_offset += MXGEFW_PAD;
|
|
rx_frags[0].size -= MXGEFW_PAD;
|
|
len -= MXGEFW_PAD;
|
|
lro_receive_frags(&ss->rx_done.lro_mgr, rx_frags,
|
|
/* opaque, will come back in get_frag_header */
|
|
len, len,
|
|
(void *)(__force unsigned long)csum, csum);
|
|
|
|
return 1;
|
|
}
|
|
|
|
hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
|
|
|
|
/* allocate an skb to attach the page(s) to. This is done
|
|
* after trying LRO, so as to avoid skb allocation overheads */
|
|
|
|
skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
|
|
if (unlikely(skb == NULL)) {
|
|
mgp->stats.rx_dropped++;
|
|
do {
|
|
i--;
|
|
put_page(rx_frags[i].page);
|
|
} while (i != 0);
|
|
return 0;
|
|
}
|
|
|
|
/* Attach the pages to the skb, and trim off any padding */
|
|
myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
|
|
if (skb_shinfo(skb)->frags[0].size <= 0) {
|
|
put_page(skb_shinfo(skb)->frags[0].page);
|
|
skb_shinfo(skb)->nr_frags = 0;
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
if (mgp->csum_flag) {
|
|
if ((skb->protocol == htons(ETH_P_IP)) ||
|
|
(skb->protocol == htons(ETH_P_IPV6))) {
|
|
skb->csum = csum;
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
} else
|
|
myri10ge_vlan_ip_csum(skb, csum);
|
|
}
|
|
netif_receive_skb(skb);
|
|
dev->last_rx = jiffies;
|
|
return 1;
|
|
}
|
|
|
|
static inline void
|
|
myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
|
|
{
|
|
struct pci_dev *pdev = ss->mgp->pdev;
|
|
struct myri10ge_tx_buf *tx = &ss->tx;
|
|
struct netdev_queue *dev_queue;
|
|
struct sk_buff *skb;
|
|
int idx, len;
|
|
|
|
while (tx->pkt_done != mcp_index) {
|
|
idx = tx->done & tx->mask;
|
|
skb = tx->info[idx].skb;
|
|
|
|
/* Mark as free */
|
|
tx->info[idx].skb = NULL;
|
|
if (tx->info[idx].last) {
|
|
tx->pkt_done++;
|
|
tx->info[idx].last = 0;
|
|
}
|
|
tx->done++;
|
|
len = pci_unmap_len(&tx->info[idx], len);
|
|
pci_unmap_len_set(&tx->info[idx], len, 0);
|
|
if (skb) {
|
|
ss->stats.tx_bytes += skb->len;
|
|
ss->stats.tx_packets++;
|
|
dev_kfree_skb_irq(skb);
|
|
if (len)
|
|
pci_unmap_single(pdev,
|
|
pci_unmap_addr(&tx->info[idx],
|
|
bus), len,
|
|
PCI_DMA_TODEVICE);
|
|
} else {
|
|
if (len)
|
|
pci_unmap_page(pdev,
|
|
pci_unmap_addr(&tx->info[idx],
|
|
bus), len,
|
|
PCI_DMA_TODEVICE);
|
|
}
|
|
}
|
|
|
|
dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
|
|
/*
|
|
* Make a minimal effort to prevent the NIC from polling an
|
|
* idle tx queue. If we can't get the lock we leave the queue
|
|
* active. In this case, either a thread was about to start
|
|
* using the queue anyway, or we lost a race and the NIC will
|
|
* waste some of its resources polling an inactive queue for a
|
|
* while.
|
|
*/
|
|
|
|
if ((ss->mgp->dev->real_num_tx_queues > 1) &&
|
|
__netif_tx_trylock(dev_queue)) {
|
|
if (tx->req == tx->done) {
|
|
tx->queue_active = 0;
|
|
put_be32(htonl(1), tx->send_stop);
|
|
}
|
|
__netif_tx_unlock(dev_queue);
|
|
}
|
|
|
|
/* start the queue if we've stopped it */
|
|
if (netif_tx_queue_stopped(dev_queue)
|
|
&& tx->req - tx->done < (tx->mask >> 1)) {
|
|
tx->wake_queue++;
|
|
netif_tx_wake_queue(dev_queue);
|
|
}
|
|
}
|
|
|
|
static inline int
|
|
myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
|
|
{
|
|
struct myri10ge_rx_done *rx_done = &ss->rx_done;
|
|
struct myri10ge_priv *mgp = ss->mgp;
|
|
unsigned long rx_bytes = 0;
|
|
unsigned long rx_packets = 0;
|
|
unsigned long rx_ok;
|
|
|
|
int idx = rx_done->idx;
|
|
int cnt = rx_done->cnt;
|
|
int work_done = 0;
|
|
u16 length;
|
|
__wsum checksum;
|
|
|
|
while (rx_done->entry[idx].length != 0 && work_done < budget) {
|
|
length = ntohs(rx_done->entry[idx].length);
|
|
rx_done->entry[idx].length = 0;
|
|
checksum = csum_unfold(rx_done->entry[idx].checksum);
|
|
if (length <= mgp->small_bytes)
|
|
rx_ok = myri10ge_rx_done(ss, &ss->rx_small,
|
|
mgp->small_bytes,
|
|
length, checksum);
|
|
else
|
|
rx_ok = myri10ge_rx_done(ss, &ss->rx_big,
|
|
mgp->big_bytes,
|
|
length, checksum);
|
|
rx_packets += rx_ok;
|
|
rx_bytes += rx_ok * (unsigned long)length;
|
|
cnt++;
|
|
idx = cnt & (mgp->max_intr_slots - 1);
|
|
work_done++;
|
|
}
|
|
rx_done->idx = idx;
|
|
rx_done->cnt = cnt;
|
|
ss->stats.rx_packets += rx_packets;
|
|
ss->stats.rx_bytes += rx_bytes;
|
|
|
|
if (myri10ge_lro)
|
|
lro_flush_all(&rx_done->lro_mgr);
|
|
|
|
/* restock receive rings if needed */
|
|
if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
|
|
myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
|
|
mgp->small_bytes + MXGEFW_PAD, 0);
|
|
if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
|
|
myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
|
|
{
|
|
struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
|
|
|
|
if (unlikely(stats->stats_updated)) {
|
|
unsigned link_up = ntohl(stats->link_up);
|
|
if (mgp->link_state != link_up) {
|
|
mgp->link_state = link_up;
|
|
|
|
if (mgp->link_state == MXGEFW_LINK_UP) {
|
|
if (netif_msg_link(mgp))
|
|
printk(KERN_INFO
|
|
"myri10ge: %s: link up\n",
|
|
mgp->dev->name);
|
|
netif_carrier_on(mgp->dev);
|
|
mgp->link_changes++;
|
|
} else {
|
|
if (netif_msg_link(mgp))
|
|
printk(KERN_INFO
|
|
"myri10ge: %s: link %s\n",
|
|
mgp->dev->name,
|
|
(link_up == MXGEFW_LINK_MYRINET ?
|
|
"mismatch (Myrinet detected)" :
|
|
"down"));
|
|
netif_carrier_off(mgp->dev);
|
|
mgp->link_changes++;
|
|
}
|
|
}
|
|
if (mgp->rdma_tags_available !=
|
|
ntohl(stats->rdma_tags_available)) {
|
|
mgp->rdma_tags_available =
|
|
ntohl(stats->rdma_tags_available);
|
|
printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
|
|
"%d tags left\n", mgp->dev->name,
|
|
mgp->rdma_tags_available);
|
|
}
|
|
mgp->down_cnt += stats->link_down;
|
|
if (stats->link_down)
|
|
wake_up(&mgp->down_wq);
|
|
}
|
|
}
|
|
|
|
static int myri10ge_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct myri10ge_slice_state *ss =
|
|
container_of(napi, struct myri10ge_slice_state, napi);
|
|
struct net_device *netdev = ss->mgp->dev;
|
|
int work_done;
|
|
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
if (ss->mgp->dca_enabled)
|
|
myri10ge_update_dca(ss);
|
|
#endif
|
|
|
|
/* process as many rx events as NAPI will allow */
|
|
work_done = myri10ge_clean_rx_done(ss, budget);
|
|
|
|
if (work_done < budget) {
|
|
netif_rx_complete(netdev, napi);
|
|
put_be32(htonl(3), ss->irq_claim);
|
|
}
|
|
return work_done;
|
|
}
|
|
|
|
static irqreturn_t myri10ge_intr(int irq, void *arg)
|
|
{
|
|
struct myri10ge_slice_state *ss = arg;
|
|
struct myri10ge_priv *mgp = ss->mgp;
|
|
struct mcp_irq_data *stats = ss->fw_stats;
|
|
struct myri10ge_tx_buf *tx = &ss->tx;
|
|
u32 send_done_count;
|
|
int i;
|
|
|
|
/* an interrupt on a non-zero receive-only slice is implicitly
|
|
* valid since MSI-X irqs are not shared */
|
|
if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
|
|
netif_rx_schedule(ss->dev, &ss->napi);
|
|
return (IRQ_HANDLED);
|
|
}
|
|
|
|
/* make sure it is our IRQ, and that the DMA has finished */
|
|
if (unlikely(!stats->valid))
|
|
return (IRQ_NONE);
|
|
|
|
/* low bit indicates receives are present, so schedule
|
|
* napi poll handler */
|
|
if (stats->valid & 1)
|
|
netif_rx_schedule(ss->dev, &ss->napi);
|
|
|
|
if (!mgp->msi_enabled && !mgp->msix_enabled) {
|
|
put_be32(0, mgp->irq_deassert);
|
|
if (!myri10ge_deassert_wait)
|
|
stats->valid = 0;
|
|
mb();
|
|
} else
|
|
stats->valid = 0;
|
|
|
|
/* Wait for IRQ line to go low, if using INTx */
|
|
i = 0;
|
|
while (1) {
|
|
i++;
|
|
/* check for transmit completes and receives */
|
|
send_done_count = ntohl(stats->send_done_count);
|
|
if (send_done_count != tx->pkt_done)
|
|
myri10ge_tx_done(ss, (int)send_done_count);
|
|
if (unlikely(i > myri10ge_max_irq_loops)) {
|
|
printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
|
|
mgp->dev->name);
|
|
stats->valid = 0;
|
|
schedule_work(&mgp->watchdog_work);
|
|
}
|
|
if (likely(stats->valid == 0))
|
|
break;
|
|
cpu_relax();
|
|
barrier();
|
|
}
|
|
|
|
/* Only slice 0 updates stats */
|
|
if (ss == mgp->ss)
|
|
myri10ge_check_statblock(mgp);
|
|
|
|
put_be32(htonl(3), ss->irq_claim + 1);
|
|
return (IRQ_HANDLED);
|
|
}
|
|
|
|
static int
|
|
myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
char *ptr;
|
|
int i;
|
|
|
|
cmd->autoneg = AUTONEG_DISABLE;
|
|
cmd->speed = SPEED_10000;
|
|
cmd->duplex = DUPLEX_FULL;
|
|
|
|
/*
|
|
* parse the product code to deterimine the interface type
|
|
* (CX4, XFP, Quad Ribbon Fiber) by looking at the character
|
|
* after the 3rd dash in the driver's cached copy of the
|
|
* EEPROM's product code string.
|
|
*/
|
|
ptr = mgp->product_code_string;
|
|
if (ptr == NULL) {
|
|
printk(KERN_ERR "myri10ge: %s: Missing product code\n",
|
|
netdev->name);
|
|
return 0;
|
|
}
|
|
for (i = 0; i < 3; i++, ptr++) {
|
|
ptr = strchr(ptr, '-');
|
|
if (ptr == NULL) {
|
|
printk(KERN_ERR "myri10ge: %s: Invalid product "
|
|
"code %s\n", netdev->name,
|
|
mgp->product_code_string);
|
|
return 0;
|
|
}
|
|
}
|
|
if (*ptr == 'R' || *ptr == 'Q') {
|
|
/* We've found either an XFP or quad ribbon fiber */
|
|
cmd->port = PORT_FIBRE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
strlcpy(info->driver, "myri10ge", sizeof(info->driver));
|
|
strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
|
|
strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
|
|
strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
|
|
}
|
|
|
|
static int
|
|
myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
coal->rx_coalesce_usecs = mgp->intr_coal_delay;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
mgp->intr_coal_delay = coal->rx_coalesce_usecs;
|
|
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
myri10ge_get_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
pause->autoneg = 0;
|
|
pause->rx_pause = mgp->pause;
|
|
pause->tx_pause = mgp->pause;
|
|
}
|
|
|
|
static int
|
|
myri10ge_set_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
if (pause->tx_pause != mgp->pause)
|
|
return myri10ge_change_pause(mgp, pause->tx_pause);
|
|
if (pause->rx_pause != mgp->pause)
|
|
return myri10ge_change_pause(mgp, pause->tx_pause);
|
|
if (pause->autoneg != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
myri10ge_get_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
|
|
ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
|
|
ring->rx_jumbo_max_pending = 0;
|
|
ring->tx_max_pending = mgp->ss[0].rx_small.mask + 1;
|
|
ring->rx_mini_pending = ring->rx_mini_max_pending;
|
|
ring->rx_pending = ring->rx_max_pending;
|
|
ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
|
|
ring->tx_pending = ring->tx_max_pending;
|
|
}
|
|
|
|
static u32 myri10ge_get_rx_csum(struct net_device *netdev)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
if (mgp->csum_flag)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
if (csum_enabled)
|
|
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
|
|
else
|
|
mgp->csum_flag = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
unsigned long flags = mgp->features & (NETIF_F_TSO6 | NETIF_F_TSO);
|
|
|
|
if (tso_enabled)
|
|
netdev->features |= flags;
|
|
else
|
|
netdev->features &= ~flags;
|
|
return 0;
|
|
}
|
|
|
|
static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
|
|
"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
|
|
"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
|
|
"rx_length_errors", "rx_over_errors", "rx_crc_errors",
|
|
"rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
|
|
"tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
|
|
"tx_heartbeat_errors", "tx_window_errors",
|
|
/* device-specific stats */
|
|
"tx_boundary", "WC", "irq", "MSI", "MSIX",
|
|
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
|
|
"serial_number", "watchdog_resets",
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
"dca_capable_firmware", "dca_device_present",
|
|
#endif
|
|
"link_changes", "link_up", "dropped_link_overflow",
|
|
"dropped_link_error_or_filtered",
|
|
"dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
|
|
"dropped_unicast_filtered", "dropped_multicast_filtered",
|
|
"dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
|
|
"dropped_no_big_buffer"
|
|
};
|
|
|
|
static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
|
|
"----------- slice ---------",
|
|
"tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
|
|
"rx_small_cnt", "rx_big_cnt",
|
|
"wake_queue", "stop_queue", "tx_linearized", "LRO aggregated",
|
|
"LRO flushed",
|
|
"LRO avg aggr", "LRO no_desc"
|
|
};
|
|
|
|
#define MYRI10GE_NET_STATS_LEN 21
|
|
#define MYRI10GE_MAIN_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_main_stats)
|
|
#define MYRI10GE_SLICE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_slice_stats)
|
|
|
|
static void
|
|
myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
int i;
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
memcpy(data, *myri10ge_gstrings_main_stats,
|
|
sizeof(myri10ge_gstrings_main_stats));
|
|
data += sizeof(myri10ge_gstrings_main_stats);
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
memcpy(data, *myri10ge_gstrings_slice_stats,
|
|
sizeof(myri10ge_gstrings_slice_stats));
|
|
data += sizeof(myri10ge_gstrings_slice_stats);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return MYRI10GE_MAIN_STATS_LEN +
|
|
mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void
|
|
myri10ge_get_ethtool_stats(struct net_device *netdev,
|
|
struct ethtool_stats *stats, u64 * data)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
struct myri10ge_slice_state *ss;
|
|
int slice;
|
|
int i;
|
|
|
|
for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
|
|
data[i] = ((unsigned long *)&mgp->stats)[i];
|
|
|
|
data[i++] = (unsigned int)mgp->tx_boundary;
|
|
data[i++] = (unsigned int)mgp->wc_enabled;
|
|
data[i++] = (unsigned int)mgp->pdev->irq;
|
|
data[i++] = (unsigned int)mgp->msi_enabled;
|
|
data[i++] = (unsigned int)mgp->msix_enabled;
|
|
data[i++] = (unsigned int)mgp->read_dma;
|
|
data[i++] = (unsigned int)mgp->write_dma;
|
|
data[i++] = (unsigned int)mgp->read_write_dma;
|
|
data[i++] = (unsigned int)mgp->serial_number;
|
|
data[i++] = (unsigned int)mgp->watchdog_resets;
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
|
|
data[i++] = (unsigned int)(mgp->dca_enabled);
|
|
#endif
|
|
data[i++] = (unsigned int)mgp->link_changes;
|
|
|
|
/* firmware stats are useful only in the first slice */
|
|
ss = &mgp->ss[0];
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
|
|
data[i++] =
|
|
(unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
|
|
data[i++] =
|
|
(unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
|
|
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
|
|
|
|
for (slice = 0; slice < mgp->num_slices; slice++) {
|
|
ss = &mgp->ss[slice];
|
|
data[i++] = slice;
|
|
data[i++] = (unsigned int)ss->tx.pkt_start;
|
|
data[i++] = (unsigned int)ss->tx.pkt_done;
|
|
data[i++] = (unsigned int)ss->tx.req;
|
|
data[i++] = (unsigned int)ss->tx.done;
|
|
data[i++] = (unsigned int)ss->rx_small.cnt;
|
|
data[i++] = (unsigned int)ss->rx_big.cnt;
|
|
data[i++] = (unsigned int)ss->tx.wake_queue;
|
|
data[i++] = (unsigned int)ss->tx.stop_queue;
|
|
data[i++] = (unsigned int)ss->tx.linearized;
|
|
data[i++] = ss->rx_done.lro_mgr.stats.aggregated;
|
|
data[i++] = ss->rx_done.lro_mgr.stats.flushed;
|
|
if (ss->rx_done.lro_mgr.stats.flushed)
|
|
data[i++] = ss->rx_done.lro_mgr.stats.aggregated /
|
|
ss->rx_done.lro_mgr.stats.flushed;
|
|
else
|
|
data[i++] = 0;
|
|
data[i++] = ss->rx_done.lro_mgr.stats.no_desc;
|
|
}
|
|
}
|
|
|
|
static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
mgp->msg_enable = value;
|
|
}
|
|
|
|
static u32 myri10ge_get_msglevel(struct net_device *netdev)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
return mgp->msg_enable;
|
|
}
|
|
|
|
static const struct ethtool_ops myri10ge_ethtool_ops = {
|
|
.get_settings = myri10ge_get_settings,
|
|
.get_drvinfo = myri10ge_get_drvinfo,
|
|
.get_coalesce = myri10ge_get_coalesce,
|
|
.set_coalesce = myri10ge_set_coalesce,
|
|
.get_pauseparam = myri10ge_get_pauseparam,
|
|
.set_pauseparam = myri10ge_set_pauseparam,
|
|
.get_ringparam = myri10ge_get_ringparam,
|
|
.get_rx_csum = myri10ge_get_rx_csum,
|
|
.set_rx_csum = myri10ge_set_rx_csum,
|
|
.set_tx_csum = ethtool_op_set_tx_hw_csum,
|
|
.set_sg = ethtool_op_set_sg,
|
|
.set_tso = myri10ge_set_tso,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_strings = myri10ge_get_strings,
|
|
.get_sset_count = myri10ge_get_sset_count,
|
|
.get_ethtool_stats = myri10ge_get_ethtool_stats,
|
|
.set_msglevel = myri10ge_set_msglevel,
|
|
.get_msglevel = myri10ge_get_msglevel
|
|
};
|
|
|
|
static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
|
|
{
|
|
struct myri10ge_priv *mgp = ss->mgp;
|
|
struct myri10ge_cmd cmd;
|
|
struct net_device *dev = mgp->dev;
|
|
int tx_ring_size, rx_ring_size;
|
|
int tx_ring_entries, rx_ring_entries;
|
|
int i, slice, status;
|
|
size_t bytes;
|
|
|
|
/* get ring sizes */
|
|
slice = ss - mgp->ss;
|
|
cmd.data0 = slice;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
|
|
tx_ring_size = cmd.data0;
|
|
cmd.data0 = slice;
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
|
|
if (status != 0)
|
|
return status;
|
|
rx_ring_size = cmd.data0;
|
|
|
|
tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
|
|
rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
|
|
ss->tx.mask = tx_ring_entries - 1;
|
|
ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
|
|
|
|
status = -ENOMEM;
|
|
|
|
/* allocate the host shadow rings */
|
|
|
|
bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
|
|
* sizeof(*ss->tx.req_list);
|
|
ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
|
|
if (ss->tx.req_bytes == NULL)
|
|
goto abort_with_nothing;
|
|
|
|
/* ensure req_list entries are aligned to 8 bytes */
|
|
ss->tx.req_list = (struct mcp_kreq_ether_send *)
|
|
ALIGN((unsigned long)ss->tx.req_bytes, 8);
|
|
ss->tx.queue_active = 0;
|
|
|
|
bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
|
|
ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
|
|
if (ss->rx_small.shadow == NULL)
|
|
goto abort_with_tx_req_bytes;
|
|
|
|
bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
|
|
ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
|
|
if (ss->rx_big.shadow == NULL)
|
|
goto abort_with_rx_small_shadow;
|
|
|
|
/* allocate the host info rings */
|
|
|
|
bytes = tx_ring_entries * sizeof(*ss->tx.info);
|
|
ss->tx.info = kzalloc(bytes, GFP_KERNEL);
|
|
if (ss->tx.info == NULL)
|
|
goto abort_with_rx_big_shadow;
|
|
|
|
bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
|
|
ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
|
|
if (ss->rx_small.info == NULL)
|
|
goto abort_with_tx_info;
|
|
|
|
bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
|
|
ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
|
|
if (ss->rx_big.info == NULL)
|
|
goto abort_with_rx_small_info;
|
|
|
|
/* Fill the receive rings */
|
|
ss->rx_big.cnt = 0;
|
|
ss->rx_small.cnt = 0;
|
|
ss->rx_big.fill_cnt = 0;
|
|
ss->rx_small.fill_cnt = 0;
|
|
ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
|
|
ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
|
|
ss->rx_small.watchdog_needed = 0;
|
|
ss->rx_big.watchdog_needed = 0;
|
|
myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
|
|
mgp->small_bytes + MXGEFW_PAD, 0);
|
|
|
|
if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s:slice-%d: alloced only %d small bufs\n",
|
|
dev->name, slice, ss->rx_small.fill_cnt);
|
|
goto abort_with_rx_small_ring;
|
|
}
|
|
|
|
myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
|
|
if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s:slice-%d: alloced only %d big bufs\n",
|
|
dev->name, slice, ss->rx_big.fill_cnt);
|
|
goto abort_with_rx_big_ring;
|
|
}
|
|
|
|
return 0;
|
|
|
|
abort_with_rx_big_ring:
|
|
for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
|
|
int idx = i & ss->rx_big.mask;
|
|
myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
|
|
mgp->big_bytes);
|
|
put_page(ss->rx_big.info[idx].page);
|
|
}
|
|
|
|
abort_with_rx_small_ring:
|
|
for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
|
|
int idx = i & ss->rx_small.mask;
|
|
myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
|
|
mgp->small_bytes + MXGEFW_PAD);
|
|
put_page(ss->rx_small.info[idx].page);
|
|
}
|
|
|
|
kfree(ss->rx_big.info);
|
|
|
|
abort_with_rx_small_info:
|
|
kfree(ss->rx_small.info);
|
|
|
|
abort_with_tx_info:
|
|
kfree(ss->tx.info);
|
|
|
|
abort_with_rx_big_shadow:
|
|
kfree(ss->rx_big.shadow);
|
|
|
|
abort_with_rx_small_shadow:
|
|
kfree(ss->rx_small.shadow);
|
|
|
|
abort_with_tx_req_bytes:
|
|
kfree(ss->tx.req_bytes);
|
|
ss->tx.req_bytes = NULL;
|
|
ss->tx.req_list = NULL;
|
|
|
|
abort_with_nothing:
|
|
return status;
|
|
}
|
|
|
|
static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
|
|
{
|
|
struct myri10ge_priv *mgp = ss->mgp;
|
|
struct sk_buff *skb;
|
|
struct myri10ge_tx_buf *tx;
|
|
int i, len, idx;
|
|
|
|
/* If not allocated, skip it */
|
|
if (ss->tx.req_list == NULL)
|
|
return;
|
|
|
|
for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
|
|
idx = i & ss->rx_big.mask;
|
|
if (i == ss->rx_big.fill_cnt - 1)
|
|
ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
|
|
myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
|
|
mgp->big_bytes);
|
|
put_page(ss->rx_big.info[idx].page);
|
|
}
|
|
|
|
for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
|
|
idx = i & ss->rx_small.mask;
|
|
if (i == ss->rx_small.fill_cnt - 1)
|
|
ss->rx_small.info[idx].page_offset =
|
|
MYRI10GE_ALLOC_SIZE;
|
|
myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
|
|
mgp->small_bytes + MXGEFW_PAD);
|
|
put_page(ss->rx_small.info[idx].page);
|
|
}
|
|
tx = &ss->tx;
|
|
while (tx->done != tx->req) {
|
|
idx = tx->done & tx->mask;
|
|
skb = tx->info[idx].skb;
|
|
|
|
/* Mark as free */
|
|
tx->info[idx].skb = NULL;
|
|
tx->done++;
|
|
len = pci_unmap_len(&tx->info[idx], len);
|
|
pci_unmap_len_set(&tx->info[idx], len, 0);
|
|
if (skb) {
|
|
ss->stats.tx_dropped++;
|
|
dev_kfree_skb_any(skb);
|
|
if (len)
|
|
pci_unmap_single(mgp->pdev,
|
|
pci_unmap_addr(&tx->info[idx],
|
|
bus), len,
|
|
PCI_DMA_TODEVICE);
|
|
} else {
|
|
if (len)
|
|
pci_unmap_page(mgp->pdev,
|
|
pci_unmap_addr(&tx->info[idx],
|
|
bus), len,
|
|
PCI_DMA_TODEVICE);
|
|
}
|
|
}
|
|
kfree(ss->rx_big.info);
|
|
|
|
kfree(ss->rx_small.info);
|
|
|
|
kfree(ss->tx.info);
|
|
|
|
kfree(ss->rx_big.shadow);
|
|
|
|
kfree(ss->rx_small.shadow);
|
|
|
|
kfree(ss->tx.req_bytes);
|
|
ss->tx.req_bytes = NULL;
|
|
ss->tx.req_list = NULL;
|
|
}
|
|
|
|
static int myri10ge_request_irq(struct myri10ge_priv *mgp)
|
|
{
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
struct myri10ge_slice_state *ss;
|
|
struct net_device *netdev = mgp->dev;
|
|
int i;
|
|
int status;
|
|
|
|
mgp->msi_enabled = 0;
|
|
mgp->msix_enabled = 0;
|
|
status = 0;
|
|
if (myri10ge_msi) {
|
|
if (mgp->num_slices > 1) {
|
|
status =
|
|
pci_enable_msix(pdev, mgp->msix_vectors,
|
|
mgp->num_slices);
|
|
if (status == 0) {
|
|
mgp->msix_enabled = 1;
|
|
} else {
|
|
dev_err(&pdev->dev,
|
|
"Error %d setting up MSI-X\n", status);
|
|
return status;
|
|
}
|
|
}
|
|
if (mgp->msix_enabled == 0) {
|
|
status = pci_enable_msi(pdev);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev,
|
|
"Error %d setting up MSI; falling back to xPIC\n",
|
|
status);
|
|
} else {
|
|
mgp->msi_enabled = 1;
|
|
}
|
|
}
|
|
}
|
|
if (mgp->msix_enabled) {
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
ss = &mgp->ss[i];
|
|
snprintf(ss->irq_desc, sizeof(ss->irq_desc),
|
|
"%s:slice-%d", netdev->name, i);
|
|
status = request_irq(mgp->msix_vectors[i].vector,
|
|
myri10ge_intr, 0, ss->irq_desc,
|
|
ss);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev,
|
|
"slice %d failed to allocate IRQ\n", i);
|
|
i--;
|
|
while (i >= 0) {
|
|
free_irq(mgp->msix_vectors[i].vector,
|
|
&mgp->ss[i]);
|
|
i--;
|
|
}
|
|
pci_disable_msix(pdev);
|
|
return status;
|
|
}
|
|
}
|
|
} else {
|
|
status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
|
|
mgp->dev->name, &mgp->ss[0]);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "failed to allocate IRQ\n");
|
|
if (mgp->msi_enabled)
|
|
pci_disable_msi(pdev);
|
|
}
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static void myri10ge_free_irq(struct myri10ge_priv *mgp)
|
|
{
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
int i;
|
|
|
|
if (mgp->msix_enabled) {
|
|
for (i = 0; i < mgp->num_slices; i++)
|
|
free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
|
|
} else {
|
|
free_irq(pdev->irq, &mgp->ss[0]);
|
|
}
|
|
if (mgp->msi_enabled)
|
|
pci_disable_msi(pdev);
|
|
if (mgp->msix_enabled)
|
|
pci_disable_msix(pdev);
|
|
}
|
|
|
|
static int
|
|
myri10ge_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
|
|
void **ip_hdr, void **tcpudp_hdr,
|
|
u64 * hdr_flags, void *priv)
|
|
{
|
|
struct ethhdr *eh;
|
|
struct vlan_ethhdr *veh;
|
|
struct iphdr *iph;
|
|
u8 *va = page_address(frag->page) + frag->page_offset;
|
|
unsigned long ll_hlen;
|
|
/* passed opaque through lro_receive_frags() */
|
|
__wsum csum = (__force __wsum) (unsigned long)priv;
|
|
|
|
/* find the mac header, aborting if not IPv4 */
|
|
|
|
eh = (struct ethhdr *)va;
|
|
*mac_hdr = eh;
|
|
ll_hlen = ETH_HLEN;
|
|
if (eh->h_proto != htons(ETH_P_IP)) {
|
|
if (eh->h_proto == htons(ETH_P_8021Q)) {
|
|
veh = (struct vlan_ethhdr *)va;
|
|
if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
|
|
return -1;
|
|
|
|
ll_hlen += VLAN_HLEN;
|
|
|
|
/*
|
|
* HW checksum starts ETH_HLEN bytes into
|
|
* frame, so we must subtract off the VLAN
|
|
* header's checksum before csum can be used
|
|
*/
|
|
csum = csum_sub(csum, csum_partial(va + ETH_HLEN,
|
|
VLAN_HLEN, 0));
|
|
} else {
|
|
return -1;
|
|
}
|
|
}
|
|
*hdr_flags = LRO_IPV4;
|
|
|
|
iph = (struct iphdr *)(va + ll_hlen);
|
|
*ip_hdr = iph;
|
|
if (iph->protocol != IPPROTO_TCP)
|
|
return -1;
|
|
*hdr_flags |= LRO_TCP;
|
|
*tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
|
|
|
|
/* verify the IP checksum */
|
|
if (unlikely(ip_fast_csum((u8 *) iph, iph->ihl)))
|
|
return -1;
|
|
|
|
/* verify the checksum */
|
|
if (unlikely(csum_tcpudp_magic(iph->saddr, iph->daddr,
|
|
ntohs(iph->tot_len) - (iph->ihl << 2),
|
|
IPPROTO_TCP, csum)))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
struct myri10ge_slice_state *ss;
|
|
int status;
|
|
|
|
ss = &mgp->ss[slice];
|
|
status = 0;
|
|
if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
|
|
cmd.data0 = slice;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
|
|
&cmd, 0);
|
|
ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
|
|
(mgp->sram + cmd.data0);
|
|
}
|
|
cmd.data0 = slice;
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
|
|
&cmd, 0);
|
|
ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
|
|
(mgp->sram + cmd.data0);
|
|
|
|
cmd.data0 = slice;
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
|
|
ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
|
|
(mgp->sram + cmd.data0);
|
|
|
|
ss->tx.send_go = (__iomem __be32 *)
|
|
(mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
|
|
ss->tx.send_stop = (__iomem __be32 *)
|
|
(mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
|
|
return status;
|
|
|
|
}
|
|
|
|
static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
struct myri10ge_slice_state *ss;
|
|
int status;
|
|
|
|
ss = &mgp->ss[slice];
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
|
|
cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
|
|
if (status == -ENOSYS) {
|
|
dma_addr_t bus = ss->fw_stats_bus;
|
|
if (slice != 0)
|
|
return -EINVAL;
|
|
bus += offsetof(struct mcp_irq_data, send_done_count);
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
|
|
status = myri10ge_send_cmd(mgp,
|
|
MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
|
|
&cmd, 0);
|
|
/* Firmware cannot support multicast without STATS_DMA_V2 */
|
|
mgp->fw_multicast_support = 0;
|
|
} else {
|
|
mgp->fw_multicast_support = 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int myri10ge_open(struct net_device *dev)
|
|
{
|
|
struct myri10ge_slice_state *ss;
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
struct myri10ge_cmd cmd;
|
|
int i, status, big_pow2, slice;
|
|
u8 *itable;
|
|
struct net_lro_mgr *lro_mgr;
|
|
|
|
if (mgp->running != MYRI10GE_ETH_STOPPED)
|
|
return -EBUSY;
|
|
|
|
mgp->running = MYRI10GE_ETH_STARTING;
|
|
status = myri10ge_reset(mgp);
|
|
if (status != 0) {
|
|
printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
|
|
goto abort_with_nothing;
|
|
}
|
|
|
|
if (mgp->num_slices > 1) {
|
|
cmd.data0 = mgp->num_slices;
|
|
cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
|
|
if (mgp->dev->real_num_tx_queues > 1)
|
|
cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
|
|
&cmd, 0);
|
|
if (status != 0) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: failed to set number of slices\n",
|
|
dev->name);
|
|
goto abort_with_nothing;
|
|
}
|
|
/* setup the indirection table */
|
|
cmd.data0 = mgp->num_slices;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
|
|
&cmd, 0);
|
|
|
|
status |= myri10ge_send_cmd(mgp,
|
|
MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
|
|
&cmd, 0);
|
|
if (status != 0) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: failed to setup rss tables\n",
|
|
dev->name);
|
|
goto abort_with_nothing;
|
|
}
|
|
|
|
/* just enable an identity mapping */
|
|
itable = mgp->sram + cmd.data0;
|
|
for (i = 0; i < mgp->num_slices; i++)
|
|
__raw_writeb(i, &itable[i]);
|
|
|
|
cmd.data0 = 1;
|
|
cmd.data1 = myri10ge_rss_hash;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
|
|
&cmd, 0);
|
|
if (status != 0) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: failed to enable slices\n",
|
|
dev->name);
|
|
goto abort_with_nothing;
|
|
}
|
|
}
|
|
|
|
status = myri10ge_request_irq(mgp);
|
|
if (status != 0)
|
|
goto abort_with_nothing;
|
|
|
|
/* decide what small buffer size to use. For good TCP rx
|
|
* performance, it is important to not receive 1514 byte
|
|
* frames into jumbo buffers, as it confuses the socket buffer
|
|
* accounting code, leading to drops and erratic performance.
|
|
*/
|
|
|
|
if (dev->mtu <= ETH_DATA_LEN)
|
|
/* enough for a TCP header */
|
|
mgp->small_bytes = (128 > SMP_CACHE_BYTES)
|
|
? (128 - MXGEFW_PAD)
|
|
: (SMP_CACHE_BYTES - MXGEFW_PAD);
|
|
else
|
|
/* enough for a vlan encapsulated ETH_DATA_LEN frame */
|
|
mgp->small_bytes = VLAN_ETH_FRAME_LEN;
|
|
|
|
/* Override the small buffer size? */
|
|
if (myri10ge_small_bytes > 0)
|
|
mgp->small_bytes = myri10ge_small_bytes;
|
|
|
|
/* Firmware needs the big buff size as a power of 2. Lie and
|
|
* tell him the buffer is larger, because we only use 1
|
|
* buffer/pkt, and the mtu will prevent overruns.
|
|
*/
|
|
big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
|
|
if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
|
|
while (!is_power_of_2(big_pow2))
|
|
big_pow2++;
|
|
mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
|
|
} else {
|
|
big_pow2 = MYRI10GE_ALLOC_SIZE;
|
|
mgp->big_bytes = big_pow2;
|
|
}
|
|
|
|
/* setup the per-slice data structures */
|
|
for (slice = 0; slice < mgp->num_slices; slice++) {
|
|
ss = &mgp->ss[slice];
|
|
|
|
status = myri10ge_get_txrx(mgp, slice);
|
|
if (status != 0) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: failed to get ring sizes or locations\n",
|
|
dev->name);
|
|
goto abort_with_rings;
|
|
}
|
|
status = myri10ge_allocate_rings(ss);
|
|
if (status != 0)
|
|
goto abort_with_rings;
|
|
|
|
/* only firmware which supports multiple TX queues
|
|
* supports setting up the tx stats on non-zero
|
|
* slices */
|
|
if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
|
|
status = myri10ge_set_stats(mgp, slice);
|
|
if (status) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: Couldn't set stats DMA\n",
|
|
dev->name);
|
|
goto abort_with_rings;
|
|
}
|
|
|
|
lro_mgr = &ss->rx_done.lro_mgr;
|
|
lro_mgr->dev = dev;
|
|
lro_mgr->features = LRO_F_NAPI;
|
|
lro_mgr->ip_summed = CHECKSUM_COMPLETE;
|
|
lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
|
|
lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
|
|
lro_mgr->lro_arr = ss->rx_done.lro_desc;
|
|
lro_mgr->get_frag_header = myri10ge_get_frag_header;
|
|
lro_mgr->max_aggr = myri10ge_lro_max_pkts;
|
|
if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
|
|
lro_mgr->max_aggr = MAX_SKB_FRAGS;
|
|
|
|
/* must happen prior to any irq */
|
|
napi_enable(&(ss)->napi);
|
|
}
|
|
|
|
/* now give firmware buffers sizes, and MTU */
|
|
cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
|
|
cmd.data0 = mgp->small_bytes;
|
|
status |=
|
|
myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
|
|
cmd.data0 = big_pow2;
|
|
status |=
|
|
myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
|
|
if (status) {
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
|
|
dev->name);
|
|
goto abort_with_rings;
|
|
}
|
|
|
|
/*
|
|
* Set Linux style TSO mode; this is needed only on newer
|
|
* firmware versions. Older versions default to Linux
|
|
* style TSO
|
|
*/
|
|
cmd.data0 = 0;
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
|
|
if (status && status != -ENOSYS) {
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
|
|
dev->name);
|
|
goto abort_with_rings;
|
|
}
|
|
|
|
mgp->link_state = ~0U;
|
|
mgp->rdma_tags_available = 15;
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
|
|
if (status) {
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
|
|
dev->name);
|
|
goto abort_with_rings;
|
|
}
|
|
|
|
mgp->running = MYRI10GE_ETH_RUNNING;
|
|
mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
|
|
add_timer(&mgp->watchdog_timer);
|
|
netif_tx_wake_all_queues(dev);
|
|
|
|
return 0;
|
|
|
|
abort_with_rings:
|
|
for (i = 0; i < mgp->num_slices; i++)
|
|
myri10ge_free_rings(&mgp->ss[i]);
|
|
|
|
myri10ge_free_irq(mgp);
|
|
|
|
abort_with_nothing:
|
|
mgp->running = MYRI10GE_ETH_STOPPED;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int myri10ge_close(struct net_device *dev)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
struct myri10ge_cmd cmd;
|
|
int status, old_down_cnt;
|
|
int i;
|
|
|
|
if (mgp->running != MYRI10GE_ETH_RUNNING)
|
|
return 0;
|
|
|
|
if (mgp->ss[0].tx.req_bytes == NULL)
|
|
return 0;
|
|
|
|
del_timer_sync(&mgp->watchdog_timer);
|
|
mgp->running = MYRI10GE_ETH_STOPPING;
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
napi_disable(&mgp->ss[i].napi);
|
|
}
|
|
netif_carrier_off(dev);
|
|
|
|
netif_tx_stop_all_queues(dev);
|
|
old_down_cnt = mgp->down_cnt;
|
|
mb();
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
|
|
if (status)
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't bring down link\n",
|
|
dev->name);
|
|
|
|
wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt, HZ);
|
|
if (old_down_cnt == mgp->down_cnt)
|
|
printk(KERN_ERR "myri10ge: %s never got down irq\n", dev->name);
|
|
|
|
netif_tx_disable(dev);
|
|
myri10ge_free_irq(mgp);
|
|
for (i = 0; i < mgp->num_slices; i++)
|
|
myri10ge_free_rings(&mgp->ss[i]);
|
|
|
|
mgp->running = MYRI10GE_ETH_STOPPED;
|
|
return 0;
|
|
}
|
|
|
|
/* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
|
|
* backwards one at a time and handle ring wraps */
|
|
|
|
static inline void
|
|
myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
|
|
struct mcp_kreq_ether_send *src, int cnt)
|
|
{
|
|
int idx, starting_slot;
|
|
starting_slot = tx->req;
|
|
while (cnt > 1) {
|
|
cnt--;
|
|
idx = (starting_slot + cnt) & tx->mask;
|
|
myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
|
|
mb();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
|
|
* at most 32 bytes at a time, so as to avoid involving the software
|
|
* pio handler in the nic. We re-write the first segment's flags
|
|
* to mark them valid only after writing the entire chain.
|
|
*/
|
|
|
|
static inline void
|
|
myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
|
|
int cnt)
|
|
{
|
|
int idx, i;
|
|
struct mcp_kreq_ether_send __iomem *dstp, *dst;
|
|
struct mcp_kreq_ether_send *srcp;
|
|
u8 last_flags;
|
|
|
|
idx = tx->req & tx->mask;
|
|
|
|
last_flags = src->flags;
|
|
src->flags = 0;
|
|
mb();
|
|
dst = dstp = &tx->lanai[idx];
|
|
srcp = src;
|
|
|
|
if ((idx + cnt) < tx->mask) {
|
|
for (i = 0; i < (cnt - 1); i += 2) {
|
|
myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
|
|
mb(); /* force write every 32 bytes */
|
|
srcp += 2;
|
|
dstp += 2;
|
|
}
|
|
} else {
|
|
/* submit all but the first request, and ensure
|
|
* that it is submitted below */
|
|
myri10ge_submit_req_backwards(tx, src, cnt);
|
|
i = 0;
|
|
}
|
|
if (i < cnt) {
|
|
/* submit the first request */
|
|
myri10ge_pio_copy(dstp, srcp, sizeof(*src));
|
|
mb(); /* barrier before setting valid flag */
|
|
}
|
|
|
|
/* re-write the last 32-bits with the valid flags */
|
|
src->flags = last_flags;
|
|
put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
|
|
tx->req += cnt;
|
|
mb();
|
|
}
|
|
|
|
/*
|
|
* Transmit a packet. We need to split the packet so that a single
|
|
* segment does not cross myri10ge->tx_boundary, so this makes segment
|
|
* counting tricky. So rather than try to count segments up front, we
|
|
* just give up if there are too few segments to hold a reasonably
|
|
* fragmented packet currently available. If we run
|
|
* out of segments while preparing a packet for DMA, we just linearize
|
|
* it and try again.
|
|
*/
|
|
|
|
static int myri10ge_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
struct myri10ge_slice_state *ss;
|
|
struct mcp_kreq_ether_send *req;
|
|
struct myri10ge_tx_buf *tx;
|
|
struct skb_frag_struct *frag;
|
|
struct netdev_queue *netdev_queue;
|
|
dma_addr_t bus;
|
|
u32 low;
|
|
__be32 high_swapped;
|
|
unsigned int len;
|
|
int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
|
|
u16 pseudo_hdr_offset, cksum_offset, queue;
|
|
int cum_len, seglen, boundary, rdma_count;
|
|
u8 flags, odd_flag;
|
|
|
|
queue = skb_get_queue_mapping(skb);
|
|
ss = &mgp->ss[queue];
|
|
netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
|
|
tx = &ss->tx;
|
|
|
|
again:
|
|
req = tx->req_list;
|
|
avail = tx->mask - 1 - (tx->req - tx->done);
|
|
|
|
mss = 0;
|
|
max_segments = MXGEFW_MAX_SEND_DESC;
|
|
|
|
if (skb_is_gso(skb)) {
|
|
mss = skb_shinfo(skb)->gso_size;
|
|
max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
|
|
}
|
|
|
|
if ((unlikely(avail < max_segments))) {
|
|
/* we are out of transmit resources */
|
|
tx->stop_queue++;
|
|
netif_tx_stop_queue(netdev_queue);
|
|
return 1;
|
|
}
|
|
|
|
/* Setup checksum offloading, if needed */
|
|
cksum_offset = 0;
|
|
pseudo_hdr_offset = 0;
|
|
odd_flag = 0;
|
|
flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
|
|
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
|
|
cksum_offset = skb_transport_offset(skb);
|
|
pseudo_hdr_offset = cksum_offset + skb->csum_offset;
|
|
/* If the headers are excessively large, then we must
|
|
* fall back to a software checksum */
|
|
if (unlikely(!mss && (cksum_offset > 255 ||
|
|
pseudo_hdr_offset > 127))) {
|
|
if (skb_checksum_help(skb))
|
|
goto drop;
|
|
cksum_offset = 0;
|
|
pseudo_hdr_offset = 0;
|
|
} else {
|
|
odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
|
|
flags |= MXGEFW_FLAGS_CKSUM;
|
|
}
|
|
}
|
|
|
|
cum_len = 0;
|
|
|
|
if (mss) { /* TSO */
|
|
/* this removes any CKSUM flag from before */
|
|
flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
|
|
|
|
/* negative cum_len signifies to the
|
|
* send loop that we are still in the
|
|
* header portion of the TSO packet.
|
|
* TSO header can be at most 1KB long */
|
|
cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
|
|
|
|
/* for IPv6 TSO, the checksum offset stores the
|
|
* TCP header length, to save the firmware from
|
|
* the need to parse the headers */
|
|
if (skb_is_gso_v6(skb)) {
|
|
cksum_offset = tcp_hdrlen(skb);
|
|
/* Can only handle headers <= max_tso6 long */
|
|
if (unlikely(-cum_len > mgp->max_tso6))
|
|
return myri10ge_sw_tso(skb, dev);
|
|
}
|
|
/* for TSO, pseudo_hdr_offset holds mss.
|
|
* The firmware figures out where to put
|
|
* the checksum by parsing the header. */
|
|
pseudo_hdr_offset = mss;
|
|
} else
|
|
/* Mark small packets, and pad out tiny packets */
|
|
if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
|
|
flags |= MXGEFW_FLAGS_SMALL;
|
|
|
|
/* pad frames to at least ETH_ZLEN bytes */
|
|
if (unlikely(skb->len < ETH_ZLEN)) {
|
|
if (skb_padto(skb, ETH_ZLEN)) {
|
|
/* The packet is gone, so we must
|
|
* return 0 */
|
|
ss->stats.tx_dropped += 1;
|
|
return 0;
|
|
}
|
|
/* adjust the len to account for the zero pad
|
|
* so that the nic can know how long it is */
|
|
skb->len = ETH_ZLEN;
|
|
}
|
|
}
|
|
|
|
/* map the skb for DMA */
|
|
len = skb->len - skb->data_len;
|
|
idx = tx->req & tx->mask;
|
|
tx->info[idx].skb = skb;
|
|
bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
|
|
pci_unmap_addr_set(&tx->info[idx], bus, bus);
|
|
pci_unmap_len_set(&tx->info[idx], len, len);
|
|
|
|
frag_cnt = skb_shinfo(skb)->nr_frags;
|
|
frag_idx = 0;
|
|
count = 0;
|
|
rdma_count = 0;
|
|
|
|
/* "rdma_count" is the number of RDMAs belonging to the
|
|
* current packet BEFORE the current send request. For
|
|
* non-TSO packets, this is equal to "count".
|
|
* For TSO packets, rdma_count needs to be reset
|
|
* to 0 after a segment cut.
|
|
*
|
|
* The rdma_count field of the send request is
|
|
* the number of RDMAs of the packet starting at
|
|
* that request. For TSO send requests with one ore more cuts
|
|
* in the middle, this is the number of RDMAs starting
|
|
* after the last cut in the request. All previous
|
|
* segments before the last cut implicitly have 1 RDMA.
|
|
*
|
|
* Since the number of RDMAs is not known beforehand,
|
|
* it must be filled-in retroactively - after each
|
|
* segmentation cut or at the end of the entire packet.
|
|
*/
|
|
|
|
while (1) {
|
|
/* Break the SKB or Fragment up into pieces which
|
|
* do not cross mgp->tx_boundary */
|
|
low = MYRI10GE_LOWPART_TO_U32(bus);
|
|
high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
|
|
while (len) {
|
|
u8 flags_next;
|
|
int cum_len_next;
|
|
|
|
if (unlikely(count == max_segments))
|
|
goto abort_linearize;
|
|
|
|
boundary =
|
|
(low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
|
|
seglen = boundary - low;
|
|
if (seglen > len)
|
|
seglen = len;
|
|
flags_next = flags & ~MXGEFW_FLAGS_FIRST;
|
|
cum_len_next = cum_len + seglen;
|
|
if (mss) { /* TSO */
|
|
(req - rdma_count)->rdma_count = rdma_count + 1;
|
|
|
|
if (likely(cum_len >= 0)) { /* payload */
|
|
int next_is_first, chop;
|
|
|
|
chop = (cum_len_next > mss);
|
|
cum_len_next = cum_len_next % mss;
|
|
next_is_first = (cum_len_next == 0);
|
|
flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
|
|
flags_next |= next_is_first *
|
|
MXGEFW_FLAGS_FIRST;
|
|
rdma_count |= -(chop | next_is_first);
|
|
rdma_count += chop & !next_is_first;
|
|
} else if (likely(cum_len_next >= 0)) { /* header ends */
|
|
int small;
|
|
|
|
rdma_count = -1;
|
|
cum_len_next = 0;
|
|
seglen = -cum_len;
|
|
small = (mss <= MXGEFW_SEND_SMALL_SIZE);
|
|
flags_next = MXGEFW_FLAGS_TSO_PLD |
|
|
MXGEFW_FLAGS_FIRST |
|
|
(small * MXGEFW_FLAGS_SMALL);
|
|
}
|
|
}
|
|
req->addr_high = high_swapped;
|
|
req->addr_low = htonl(low);
|
|
req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
|
|
req->pad = 0; /* complete solid 16-byte block; does this matter? */
|
|
req->rdma_count = 1;
|
|
req->length = htons(seglen);
|
|
req->cksum_offset = cksum_offset;
|
|
req->flags = flags | ((cum_len & 1) * odd_flag);
|
|
|
|
low += seglen;
|
|
len -= seglen;
|
|
cum_len = cum_len_next;
|
|
flags = flags_next;
|
|
req++;
|
|
count++;
|
|
rdma_count++;
|
|
if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
|
|
if (unlikely(cksum_offset > seglen))
|
|
cksum_offset -= seglen;
|
|
else
|
|
cksum_offset = 0;
|
|
}
|
|
}
|
|
if (frag_idx == frag_cnt)
|
|
break;
|
|
|
|
/* map next fragment for DMA */
|
|
idx = (count + tx->req) & tx->mask;
|
|
frag = &skb_shinfo(skb)->frags[frag_idx];
|
|
frag_idx++;
|
|
len = frag->size;
|
|
bus = pci_map_page(mgp->pdev, frag->page, frag->page_offset,
|
|
len, PCI_DMA_TODEVICE);
|
|
pci_unmap_addr_set(&tx->info[idx], bus, bus);
|
|
pci_unmap_len_set(&tx->info[idx], len, len);
|
|
}
|
|
|
|
(req - rdma_count)->rdma_count = rdma_count;
|
|
if (mss)
|
|
do {
|
|
req--;
|
|
req->flags |= MXGEFW_FLAGS_TSO_LAST;
|
|
} while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
|
|
MXGEFW_FLAGS_FIRST)));
|
|
idx = ((count - 1) + tx->req) & tx->mask;
|
|
tx->info[idx].last = 1;
|
|
myri10ge_submit_req(tx, tx->req_list, count);
|
|
/* if using multiple tx queues, make sure NIC polls the
|
|
* current slice */
|
|
if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
|
|
tx->queue_active = 1;
|
|
put_be32(htonl(1), tx->send_go);
|
|
}
|
|
tx->pkt_start++;
|
|
if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
|
|
tx->stop_queue++;
|
|
netif_tx_stop_queue(netdev_queue);
|
|
}
|
|
dev->trans_start = jiffies;
|
|
return 0;
|
|
|
|
abort_linearize:
|
|
/* Free any DMA resources we've alloced and clear out the skb
|
|
* slot so as to not trip up assertions, and to avoid a
|
|
* double-free if linearizing fails */
|
|
|
|
last_idx = (idx + 1) & tx->mask;
|
|
idx = tx->req & tx->mask;
|
|
tx->info[idx].skb = NULL;
|
|
do {
|
|
len = pci_unmap_len(&tx->info[idx], len);
|
|
if (len) {
|
|
if (tx->info[idx].skb != NULL)
|
|
pci_unmap_single(mgp->pdev,
|
|
pci_unmap_addr(&tx->info[idx],
|
|
bus), len,
|
|
PCI_DMA_TODEVICE);
|
|
else
|
|
pci_unmap_page(mgp->pdev,
|
|
pci_unmap_addr(&tx->info[idx],
|
|
bus), len,
|
|
PCI_DMA_TODEVICE);
|
|
pci_unmap_len_set(&tx->info[idx], len, 0);
|
|
tx->info[idx].skb = NULL;
|
|
}
|
|
idx = (idx + 1) & tx->mask;
|
|
} while (idx != last_idx);
|
|
if (skb_is_gso(skb)) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: TSO but wanted to linearize?!?!?\n",
|
|
mgp->dev->name);
|
|
goto drop;
|
|
}
|
|
|
|
if (skb_linearize(skb))
|
|
goto drop;
|
|
|
|
tx->linearized++;
|
|
goto again;
|
|
|
|
drop:
|
|
dev_kfree_skb_any(skb);
|
|
ss->stats.tx_dropped += 1;
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct sk_buff *segs, *curr;
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
int status;
|
|
|
|
segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
|
|
if (IS_ERR(segs))
|
|
goto drop;
|
|
|
|
while (segs) {
|
|
curr = segs;
|
|
segs = segs->next;
|
|
curr->next = NULL;
|
|
status = myri10ge_xmit(curr, dev);
|
|
if (status != 0) {
|
|
dev_kfree_skb_any(curr);
|
|
if (segs != NULL) {
|
|
curr = segs;
|
|
segs = segs->next;
|
|
curr->next = NULL;
|
|
dev_kfree_skb_any(segs);
|
|
}
|
|
goto drop;
|
|
}
|
|
}
|
|
dev_kfree_skb_any(skb);
|
|
return 0;
|
|
|
|
drop:
|
|
dev_kfree_skb_any(skb);
|
|
mgp->stats.tx_dropped += 1;
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
struct myri10ge_slice_netstats *slice_stats;
|
|
struct net_device_stats *stats = &mgp->stats;
|
|
int i;
|
|
|
|
memset(stats, 0, sizeof(*stats));
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
slice_stats = &mgp->ss[i].stats;
|
|
stats->rx_packets += slice_stats->rx_packets;
|
|
stats->tx_packets += slice_stats->tx_packets;
|
|
stats->rx_bytes += slice_stats->rx_bytes;
|
|
stats->tx_bytes += slice_stats->tx_bytes;
|
|
stats->rx_dropped += slice_stats->rx_dropped;
|
|
stats->tx_dropped += slice_stats->tx_dropped;
|
|
}
|
|
return stats;
|
|
}
|
|
|
|
static void myri10ge_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
struct myri10ge_cmd cmd;
|
|
struct dev_mc_list *mc_list;
|
|
__be32 data[2] = { 0, 0 };
|
|
int err;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
/* can be called from atomic contexts,
|
|
* pass 1 to force atomicity in myri10ge_send_cmd() */
|
|
myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
|
|
|
|
/* This firmware is known to not support multicast */
|
|
if (!mgp->fw_multicast_support)
|
|
return;
|
|
|
|
/* Disable multicast filtering */
|
|
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
|
|
if (err != 0) {
|
|
printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
|
|
" error status: %d\n", dev->name, err);
|
|
goto abort;
|
|
}
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
|
|
/* request to disable multicast filtering, so quit here */
|
|
return;
|
|
}
|
|
|
|
/* Flush the filters */
|
|
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
|
|
&cmd, 1);
|
|
if (err != 0) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
|
|
", error status: %d\n", dev->name, err);
|
|
goto abort;
|
|
}
|
|
|
|
/* Walk the multicast list, and add each address */
|
|
for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) {
|
|
memcpy(data, &mc_list->dmi_addr, 6);
|
|
cmd.data0 = ntohl(data[0]);
|
|
cmd.data1 = ntohl(data[1]);
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
|
|
&cmd, 1);
|
|
|
|
if (err != 0) {
|
|
printk(KERN_ERR "myri10ge: %s: Failed "
|
|
"MXGEFW_JOIN_MULTICAST_GROUP, error status:"
|
|
"%d\t", dev->name, err);
|
|
printk(KERN_ERR "MAC %s\n",
|
|
print_mac(mac, mc_list->dmi_addr));
|
|
goto abort;
|
|
}
|
|
}
|
|
/* Enable multicast filtering */
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
|
|
if (err != 0) {
|
|
printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
|
|
"error status: %d\n", dev->name, err);
|
|
goto abort;
|
|
}
|
|
|
|
return;
|
|
|
|
abort:
|
|
return;
|
|
}
|
|
|
|
static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
struct sockaddr *sa = addr;
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
int status;
|
|
|
|
if (!is_valid_ether_addr(sa->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
status = myri10ge_update_mac_address(mgp, sa->sa_data);
|
|
if (status != 0) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: changing mac address failed with %d\n",
|
|
dev->name, status);
|
|
return status;
|
|
}
|
|
|
|
/* change the dev structure */
|
|
memcpy(dev->dev_addr, sa->sa_data, 6);
|
|
return 0;
|
|
}
|
|
|
|
static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
int error = 0;
|
|
|
|
if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
|
|
printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
|
|
dev->name, new_mtu);
|
|
return -EINVAL;
|
|
}
|
|
printk(KERN_INFO "%s: changing mtu from %d to %d\n",
|
|
dev->name, dev->mtu, new_mtu);
|
|
if (mgp->running) {
|
|
/* if we change the mtu on an active device, we must
|
|
* reset the device so the firmware sees the change */
|
|
myri10ge_close(dev);
|
|
dev->mtu = new_mtu;
|
|
myri10ge_open(dev);
|
|
} else
|
|
dev->mtu = new_mtu;
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
|
|
* Only do it if the bridge is a root port since we don't want to disturb
|
|
* any other device, except if forced with myri10ge_ecrc_enable > 1.
|
|
*/
|
|
|
|
static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
|
|
{
|
|
struct pci_dev *bridge = mgp->pdev->bus->self;
|
|
struct device *dev = &mgp->pdev->dev;
|
|
unsigned cap;
|
|
unsigned err_cap;
|
|
u16 val;
|
|
u8 ext_type;
|
|
int ret;
|
|
|
|
if (!myri10ge_ecrc_enable || !bridge)
|
|
return;
|
|
|
|
/* check that the bridge is a root port */
|
|
cap = pci_find_capability(bridge, PCI_CAP_ID_EXP);
|
|
pci_read_config_word(bridge, cap + PCI_CAP_FLAGS, &val);
|
|
ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
|
|
if (ext_type != PCI_EXP_TYPE_ROOT_PORT) {
|
|
if (myri10ge_ecrc_enable > 1) {
|
|
struct pci_dev *prev_bridge, *old_bridge = bridge;
|
|
|
|
/* Walk the hierarchy up to the root port
|
|
* where ECRC has to be enabled */
|
|
do {
|
|
prev_bridge = bridge;
|
|
bridge = bridge->bus->self;
|
|
if (!bridge || prev_bridge == bridge) {
|
|
dev_err(dev,
|
|
"Failed to find root port"
|
|
" to force ECRC\n");
|
|
return;
|
|
}
|
|
cap =
|
|
pci_find_capability(bridge, PCI_CAP_ID_EXP);
|
|
pci_read_config_word(bridge,
|
|
cap + PCI_CAP_FLAGS, &val);
|
|
ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
|
|
} while (ext_type != PCI_EXP_TYPE_ROOT_PORT);
|
|
|
|
dev_info(dev,
|
|
"Forcing ECRC on non-root port %s"
|
|
" (enabling on root port %s)\n",
|
|
pci_name(old_bridge), pci_name(bridge));
|
|
} else {
|
|
dev_err(dev,
|
|
"Not enabling ECRC on non-root port %s\n",
|
|
pci_name(bridge));
|
|
return;
|
|
}
|
|
}
|
|
|
|
cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
|
|
if (!cap)
|
|
return;
|
|
|
|
ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
|
|
if (ret) {
|
|
dev_err(dev, "failed reading ext-conf-space of %s\n",
|
|
pci_name(bridge));
|
|
dev_err(dev, "\t pci=nommconf in use? "
|
|
"or buggy/incomplete/absent ACPI MCFG attr?\n");
|
|
return;
|
|
}
|
|
if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
|
|
return;
|
|
|
|
err_cap |= PCI_ERR_CAP_ECRC_GENE;
|
|
pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
|
|
dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
|
|
}
|
|
|
|
/*
|
|
* The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
|
|
* when the PCI-E Completion packets are aligned on an 8-byte
|
|
* boundary. Some PCI-E chip sets always align Completion packets; on
|
|
* the ones that do not, the alignment can be enforced by enabling
|
|
* ECRC generation (if supported).
|
|
*
|
|
* When PCI-E Completion packets are not aligned, it is actually more
|
|
* efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
|
|
*
|
|
* If the driver can neither enable ECRC nor verify that it has
|
|
* already been enabled, then it must use a firmware image which works
|
|
* around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
|
|
* should also ensure that it never gives the device a Read-DMA which is
|
|
* larger than 2KB by setting the tx_boundary to 2KB. If ECRC is
|
|
* enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
|
|
* firmware image, and set tx_boundary to 4KB.
|
|
*/
|
|
|
|
static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
|
|
{
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
struct device *dev = &pdev->dev;
|
|
int status;
|
|
|
|
mgp->tx_boundary = 4096;
|
|
/*
|
|
* Verify the max read request size was set to 4KB
|
|
* before trying the test with 4KB.
|
|
*/
|
|
status = pcie_get_readrq(pdev);
|
|
if (status < 0) {
|
|
dev_err(dev, "Couldn't read max read req size: %d\n", status);
|
|
goto abort;
|
|
}
|
|
if (status != 4096) {
|
|
dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
|
|
mgp->tx_boundary = 2048;
|
|
}
|
|
/*
|
|
* load the optimized firmware (which assumes aligned PCIe
|
|
* completions) in order to see if it works on this host.
|
|
*/
|
|
mgp->fw_name = myri10ge_fw_aligned;
|
|
status = myri10ge_load_firmware(mgp, 1);
|
|
if (status != 0) {
|
|
goto abort;
|
|
}
|
|
|
|
/*
|
|
* Enable ECRC if possible
|
|
*/
|
|
myri10ge_enable_ecrc(mgp);
|
|
|
|
/*
|
|
* Run a DMA test which watches for unaligned completions and
|
|
* aborts on the first one seen.
|
|
*/
|
|
|
|
status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
|
|
if (status == 0)
|
|
return; /* keep the aligned firmware */
|
|
|
|
if (status != -E2BIG)
|
|
dev_warn(dev, "DMA test failed: %d\n", status);
|
|
if (status == -ENOSYS)
|
|
dev_warn(dev, "Falling back to ethp! "
|
|
"Please install up to date fw\n");
|
|
abort:
|
|
/* fall back to using the unaligned firmware */
|
|
mgp->tx_boundary = 2048;
|
|
mgp->fw_name = myri10ge_fw_unaligned;
|
|
|
|
}
|
|
|
|
static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
|
|
{
|
|
if (myri10ge_force_firmware == 0) {
|
|
int link_width, exp_cap;
|
|
u16 lnk;
|
|
|
|
exp_cap = pci_find_capability(mgp->pdev, PCI_CAP_ID_EXP);
|
|
pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk);
|
|
link_width = (lnk >> 4) & 0x3f;
|
|
|
|
/* Check to see if Link is less than 8 or if the
|
|
* upstream bridge is known to provide aligned
|
|
* completions */
|
|
if (link_width < 8) {
|
|
dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
|
|
link_width);
|
|
mgp->tx_boundary = 4096;
|
|
mgp->fw_name = myri10ge_fw_aligned;
|
|
} else {
|
|
myri10ge_firmware_probe(mgp);
|
|
}
|
|
} else {
|
|
if (myri10ge_force_firmware == 1) {
|
|
dev_info(&mgp->pdev->dev,
|
|
"Assuming aligned completions (forced)\n");
|
|
mgp->tx_boundary = 4096;
|
|
mgp->fw_name = myri10ge_fw_aligned;
|
|
} else {
|
|
dev_info(&mgp->pdev->dev,
|
|
"Assuming unaligned completions (forced)\n");
|
|
mgp->tx_boundary = 2048;
|
|
mgp->fw_name = myri10ge_fw_unaligned;
|
|
}
|
|
}
|
|
if (myri10ge_fw_name != NULL) {
|
|
dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
|
|
myri10ge_fw_name);
|
|
mgp->fw_name = myri10ge_fw_name;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct myri10ge_priv *mgp;
|
|
struct net_device *netdev;
|
|
|
|
mgp = pci_get_drvdata(pdev);
|
|
if (mgp == NULL)
|
|
return -EINVAL;
|
|
netdev = mgp->dev;
|
|
|
|
netif_device_detach(netdev);
|
|
if (netif_running(netdev)) {
|
|
printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
|
|
rtnl_lock();
|
|
myri10ge_close(netdev);
|
|
rtnl_unlock();
|
|
}
|
|
myri10ge_dummy_rdma(mgp, 0);
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
return pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
}
|
|
|
|
static int myri10ge_resume(struct pci_dev *pdev)
|
|
{
|
|
struct myri10ge_priv *mgp;
|
|
struct net_device *netdev;
|
|
int status;
|
|
u16 vendor;
|
|
|
|
mgp = pci_get_drvdata(pdev);
|
|
if (mgp == NULL)
|
|
return -EINVAL;
|
|
netdev = mgp->dev;
|
|
pci_set_power_state(pdev, 0); /* zeros conf space as a side effect */
|
|
msleep(5); /* give card time to respond */
|
|
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
|
|
if (vendor == 0xffff) {
|
|
printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
|
|
mgp->dev->name);
|
|
return -EIO;
|
|
}
|
|
|
|
status = pci_restore_state(pdev);
|
|
if (status)
|
|
return status;
|
|
|
|
status = pci_enable_device(pdev);
|
|
if (status) {
|
|
dev_err(&pdev->dev, "failed to enable device\n");
|
|
return status;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
myri10ge_reset(mgp);
|
|
myri10ge_dummy_rdma(mgp, 1);
|
|
|
|
/* Save configuration space to be restored if the
|
|
* nic resets due to a parity error */
|
|
pci_save_state(pdev);
|
|
|
|
if (netif_running(netdev)) {
|
|
rtnl_lock();
|
|
status = myri10ge_open(netdev);
|
|
rtnl_unlock();
|
|
if (status != 0)
|
|
goto abort_with_enabled;
|
|
|
|
}
|
|
netif_device_attach(netdev);
|
|
|
|
return 0;
|
|
|
|
abort_with_enabled:
|
|
pci_disable_device(pdev);
|
|
return -EIO;
|
|
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
|
|
{
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
int vs = mgp->vendor_specific_offset;
|
|
u32 reboot;
|
|
|
|
/*enter read32 mode */
|
|
pci_write_config_byte(pdev, vs + 0x10, 0x3);
|
|
|
|
/*read REBOOT_STATUS (0xfffffff0) */
|
|
pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
|
|
pci_read_config_dword(pdev, vs + 0x14, &reboot);
|
|
return reboot;
|
|
}
|
|
|
|
/*
|
|
* This watchdog is used to check whether the board has suffered
|
|
* from a parity error and needs to be recovered.
|
|
*/
|
|
static void myri10ge_watchdog(struct work_struct *work)
|
|
{
|
|
struct myri10ge_priv *mgp =
|
|
container_of(work, struct myri10ge_priv, watchdog_work);
|
|
struct myri10ge_tx_buf *tx;
|
|
u32 reboot;
|
|
int status;
|
|
int i;
|
|
u16 cmd, vendor;
|
|
|
|
mgp->watchdog_resets++;
|
|
pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
|
|
if ((cmd & PCI_COMMAND_MASTER) == 0) {
|
|
/* Bus master DMA disabled? Check to see
|
|
* if the card rebooted due to a parity error
|
|
* For now, just report it */
|
|
reboot = myri10ge_read_reboot(mgp);
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
|
|
mgp->dev->name, reboot,
|
|
myri10ge_reset_recover ? " " : " not");
|
|
if (myri10ge_reset_recover == 0)
|
|
return;
|
|
|
|
myri10ge_reset_recover--;
|
|
|
|
/*
|
|
* A rebooted nic will come back with config space as
|
|
* it was after power was applied to PCIe bus.
|
|
* Attempt to restore config space which was saved
|
|
* when the driver was loaded, or the last time the
|
|
* nic was resumed from power saving mode.
|
|
*/
|
|
pci_restore_state(mgp->pdev);
|
|
|
|
/* save state again for accounting reasons */
|
|
pci_save_state(mgp->pdev);
|
|
|
|
} else {
|
|
/* if we get back -1's from our slot, perhaps somebody
|
|
* powered off our card. Don't try to reset it in
|
|
* this case */
|
|
if (cmd == 0xffff) {
|
|
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
|
|
if (vendor == 0xffff) {
|
|
printk(KERN_ERR
|
|
"myri10ge: %s: device disappeared!\n",
|
|
mgp->dev->name);
|
|
return;
|
|
}
|
|
}
|
|
/* Perhaps it is a software error. Try to reset */
|
|
|
|
printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
|
|
mgp->dev->name);
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
tx = &mgp->ss[i].tx;
|
|
printk(KERN_INFO
|
|
"myri10ge: %s: (%d): %d %d %d %d %d %d\n",
|
|
mgp->dev->name, i, tx->queue_active, tx->req,
|
|
tx->done, tx->pkt_start, tx->pkt_done,
|
|
(int)ntohl(mgp->ss[i].fw_stats->
|
|
send_done_count));
|
|
msleep(2000);
|
|
printk(KERN_INFO
|
|
"myri10ge: %s: (%d): %d %d %d %d %d %d\n",
|
|
mgp->dev->name, i, tx->queue_active, tx->req,
|
|
tx->done, tx->pkt_start, tx->pkt_done,
|
|
(int)ntohl(mgp->ss[i].fw_stats->
|
|
send_done_count));
|
|
}
|
|
}
|
|
|
|
rtnl_lock();
|
|
myri10ge_close(mgp->dev);
|
|
status = myri10ge_load_firmware(mgp, 1);
|
|
if (status != 0)
|
|
printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
|
|
mgp->dev->name);
|
|
else
|
|
myri10ge_open(mgp->dev);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
/*
|
|
* We use our own timer routine rather than relying upon
|
|
* netdev->tx_timeout because we have a very large hardware transmit
|
|
* queue. Due to the large queue, the netdev->tx_timeout function
|
|
* cannot detect a NIC with a parity error in a timely fashion if the
|
|
* NIC is lightly loaded.
|
|
*/
|
|
static void myri10ge_watchdog_timer(unsigned long arg)
|
|
{
|
|
struct myri10ge_priv *mgp;
|
|
struct myri10ge_slice_state *ss;
|
|
int i, reset_needed;
|
|
u32 rx_pause_cnt;
|
|
|
|
mgp = (struct myri10ge_priv *)arg;
|
|
|
|
rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
|
|
for (i = 0, reset_needed = 0;
|
|
i < mgp->num_slices && reset_needed == 0; ++i) {
|
|
|
|
ss = &mgp->ss[i];
|
|
if (ss->rx_small.watchdog_needed) {
|
|
myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
|
|
mgp->small_bytes + MXGEFW_PAD,
|
|
1);
|
|
if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
|
|
myri10ge_fill_thresh)
|
|
ss->rx_small.watchdog_needed = 0;
|
|
}
|
|
if (ss->rx_big.watchdog_needed) {
|
|
myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
|
|
mgp->big_bytes, 1);
|
|
if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
|
|
myri10ge_fill_thresh)
|
|
ss->rx_big.watchdog_needed = 0;
|
|
}
|
|
|
|
if (ss->tx.req != ss->tx.done &&
|
|
ss->tx.done == ss->watchdog_tx_done &&
|
|
ss->watchdog_tx_req != ss->watchdog_tx_done) {
|
|
/* nic seems like it might be stuck.. */
|
|
if (rx_pause_cnt != mgp->watchdog_pause) {
|
|
if (net_ratelimit())
|
|
printk(KERN_WARNING
|
|
"myri10ge %s slice %d:"
|
|
"TX paused, check link partner\n",
|
|
mgp->dev->name, i);
|
|
} else {
|
|
printk(KERN_WARNING
|
|
"myri10ge %s slice %d stuck:",
|
|
mgp->dev->name, i);
|
|
reset_needed = 1;
|
|
}
|
|
}
|
|
ss->watchdog_tx_done = ss->tx.done;
|
|
ss->watchdog_tx_req = ss->tx.req;
|
|
}
|
|
mgp->watchdog_pause = rx_pause_cnt;
|
|
|
|
if (reset_needed) {
|
|
schedule_work(&mgp->watchdog_work);
|
|
} else {
|
|
/* rearm timer */
|
|
mod_timer(&mgp->watchdog_timer,
|
|
jiffies + myri10ge_watchdog_timeout * HZ);
|
|
}
|
|
}
|
|
|
|
static void myri10ge_free_slices(struct myri10ge_priv *mgp)
|
|
{
|
|
struct myri10ge_slice_state *ss;
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
size_t bytes;
|
|
int i;
|
|
|
|
if (mgp->ss == NULL)
|
|
return;
|
|
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
ss = &mgp->ss[i];
|
|
if (ss->rx_done.entry != NULL) {
|
|
bytes = mgp->max_intr_slots *
|
|
sizeof(*ss->rx_done.entry);
|
|
dma_free_coherent(&pdev->dev, bytes,
|
|
ss->rx_done.entry, ss->rx_done.bus);
|
|
ss->rx_done.entry = NULL;
|
|
}
|
|
if (ss->fw_stats != NULL) {
|
|
bytes = sizeof(*ss->fw_stats);
|
|
dma_free_coherent(&pdev->dev, bytes,
|
|
ss->fw_stats, ss->fw_stats_bus);
|
|
ss->fw_stats = NULL;
|
|
}
|
|
}
|
|
kfree(mgp->ss);
|
|
mgp->ss = NULL;
|
|
}
|
|
|
|
static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
|
|
{
|
|
struct myri10ge_slice_state *ss;
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
size_t bytes;
|
|
int i;
|
|
|
|
bytes = sizeof(*mgp->ss) * mgp->num_slices;
|
|
mgp->ss = kzalloc(bytes, GFP_KERNEL);
|
|
if (mgp->ss == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
ss = &mgp->ss[i];
|
|
bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
|
|
ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
|
|
&ss->rx_done.bus,
|
|
GFP_KERNEL);
|
|
if (ss->rx_done.entry == NULL)
|
|
goto abort;
|
|
memset(ss->rx_done.entry, 0, bytes);
|
|
bytes = sizeof(*ss->fw_stats);
|
|
ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
|
|
&ss->fw_stats_bus,
|
|
GFP_KERNEL);
|
|
if (ss->fw_stats == NULL)
|
|
goto abort;
|
|
ss->mgp = mgp;
|
|
ss->dev = mgp->dev;
|
|
netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
|
|
myri10ge_napi_weight);
|
|
}
|
|
return 0;
|
|
abort:
|
|
myri10ge_free_slices(mgp);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* This function determines the number of slices supported.
|
|
* The number slices is the minumum of the number of CPUS,
|
|
* the number of MSI-X irqs supported, the number of slices
|
|
* supported by the firmware
|
|
*/
|
|
static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
|
|
{
|
|
struct myri10ge_cmd cmd;
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
char *old_fw;
|
|
int i, status, ncpus, msix_cap;
|
|
|
|
mgp->num_slices = 1;
|
|
msix_cap = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
|
|
ncpus = num_online_cpus();
|
|
|
|
if (myri10ge_max_slices == 1 || msix_cap == 0 ||
|
|
(myri10ge_max_slices == -1 && ncpus < 2))
|
|
return;
|
|
|
|
/* try to load the slice aware rss firmware */
|
|
old_fw = mgp->fw_name;
|
|
if (myri10ge_fw_name != NULL) {
|
|
dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
|
|
myri10ge_fw_name);
|
|
mgp->fw_name = myri10ge_fw_name;
|
|
} else if (old_fw == myri10ge_fw_aligned)
|
|
mgp->fw_name = myri10ge_fw_rss_aligned;
|
|
else
|
|
mgp->fw_name = myri10ge_fw_rss_unaligned;
|
|
status = myri10ge_load_firmware(mgp, 0);
|
|
if (status != 0) {
|
|
dev_info(&pdev->dev, "Rss firmware not found\n");
|
|
return;
|
|
}
|
|
|
|
/* hit the board with a reset to ensure it is alive */
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev, "failed reset\n");
|
|
goto abort_with_fw;
|
|
return;
|
|
}
|
|
|
|
mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
|
|
|
|
/* tell it the size of the interrupt queues */
|
|
cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
|
|
if (status != 0) {
|
|
dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
|
|
goto abort_with_fw;
|
|
}
|
|
|
|
/* ask the maximum number of slices it supports */
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
|
|
if (status != 0)
|
|
goto abort_with_fw;
|
|
else
|
|
mgp->num_slices = cmd.data0;
|
|
|
|
/* Only allow multiple slices if MSI-X is usable */
|
|
if (!myri10ge_msi) {
|
|
goto abort_with_fw;
|
|
}
|
|
|
|
/* if the admin did not specify a limit to how many
|
|
* slices we should use, cap it automatically to the
|
|
* number of CPUs currently online */
|
|
if (myri10ge_max_slices == -1)
|
|
myri10ge_max_slices = ncpus;
|
|
|
|
if (mgp->num_slices > myri10ge_max_slices)
|
|
mgp->num_slices = myri10ge_max_slices;
|
|
|
|
/* Now try to allocate as many MSI-X vectors as we have
|
|
* slices. We give up on MSI-X if we can only get a single
|
|
* vector. */
|
|
|
|
mgp->msix_vectors = kzalloc(mgp->num_slices *
|
|
sizeof(*mgp->msix_vectors), GFP_KERNEL);
|
|
if (mgp->msix_vectors == NULL)
|
|
goto disable_msix;
|
|
for (i = 0; i < mgp->num_slices; i++) {
|
|
mgp->msix_vectors[i].entry = i;
|
|
}
|
|
|
|
while (mgp->num_slices > 1) {
|
|
/* make sure it is a power of two */
|
|
while (!is_power_of_2(mgp->num_slices))
|
|
mgp->num_slices--;
|
|
if (mgp->num_slices == 1)
|
|
goto disable_msix;
|
|
status = pci_enable_msix(pdev, mgp->msix_vectors,
|
|
mgp->num_slices);
|
|
if (status == 0) {
|
|
pci_disable_msix(pdev);
|
|
return;
|
|
}
|
|
if (status > 0)
|
|
mgp->num_slices = status;
|
|
else
|
|
goto disable_msix;
|
|
}
|
|
|
|
disable_msix:
|
|
if (mgp->msix_vectors != NULL) {
|
|
kfree(mgp->msix_vectors);
|
|
mgp->msix_vectors = NULL;
|
|
}
|
|
|
|
abort_with_fw:
|
|
mgp->num_slices = 1;
|
|
mgp->fw_name = old_fw;
|
|
myri10ge_load_firmware(mgp, 0);
|
|
}
|
|
|
|
static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *netdev;
|
|
struct myri10ge_priv *mgp;
|
|
struct device *dev = &pdev->dev;
|
|
int i;
|
|
int status = -ENXIO;
|
|
int dac_enabled;
|
|
|
|
netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
|
|
if (netdev == NULL) {
|
|
dev_err(dev, "Could not allocate ethernet device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
mgp = netdev_priv(netdev);
|
|
mgp->dev = netdev;
|
|
mgp->pdev = pdev;
|
|
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
|
|
mgp->pause = myri10ge_flow_control;
|
|
mgp->intr_coal_delay = myri10ge_intr_coal_delay;
|
|
mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
|
|
init_waitqueue_head(&mgp->down_wq);
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
dev_err(&pdev->dev, "pci_enable_device call failed\n");
|
|
status = -ENODEV;
|
|
goto abort_with_netdev;
|
|
}
|
|
|
|
/* Find the vendor-specific cap so we can check
|
|
* the reboot register later on */
|
|
mgp->vendor_specific_offset
|
|
= pci_find_capability(pdev, PCI_CAP_ID_VNDR);
|
|
|
|
/* Set our max read request to 4KB */
|
|
status = pcie_set_readrq(pdev, 4096);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
|
|
status);
|
|
goto abort_with_netdev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
dac_enabled = 1;
|
|
status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
|
|
if (status != 0) {
|
|
dac_enabled = 0;
|
|
dev_err(&pdev->dev,
|
|
"64-bit pci address mask was refused, "
|
|
"trying 32-bit\n");
|
|
status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
}
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
|
|
goto abort_with_netdev;
|
|
}
|
|
(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
|
&mgp->cmd_bus, GFP_KERNEL);
|
|
if (mgp->cmd == NULL)
|
|
goto abort_with_netdev;
|
|
|
|
mgp->board_span = pci_resource_len(pdev, 0);
|
|
mgp->iomem_base = pci_resource_start(pdev, 0);
|
|
mgp->mtrr = -1;
|
|
mgp->wc_enabled = 0;
|
|
#ifdef CONFIG_MTRR
|
|
mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
|
|
MTRR_TYPE_WRCOMB, 1);
|
|
if (mgp->mtrr >= 0)
|
|
mgp->wc_enabled = 1;
|
|
#endif
|
|
/* Hack. need to get rid of these magic numbers */
|
|
mgp->sram_size =
|
|
2 * 1024 * 1024 - (2 * (48 * 1024) + (32 * 1024)) - 0x100;
|
|
if (mgp->sram_size > mgp->board_span) {
|
|
dev_err(&pdev->dev, "board span %ld bytes too small\n",
|
|
mgp->board_span);
|
|
goto abort_with_mtrr;
|
|
}
|
|
mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
|
|
if (mgp->sram == NULL) {
|
|
dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
|
|
mgp->board_span, mgp->iomem_base);
|
|
status = -ENXIO;
|
|
goto abort_with_mtrr;
|
|
}
|
|
memcpy_fromio(mgp->eeprom_strings,
|
|
mgp->sram + mgp->sram_size - MYRI10GE_EEPROM_STRINGS_SIZE,
|
|
MYRI10GE_EEPROM_STRINGS_SIZE);
|
|
memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
|
|
status = myri10ge_read_mac_addr(mgp);
|
|
if (status)
|
|
goto abort_with_ioremap;
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
netdev->dev_addr[i] = mgp->mac_addr[i];
|
|
|
|
myri10ge_select_firmware(mgp);
|
|
|
|
status = myri10ge_load_firmware(mgp, 1);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "failed to load firmware\n");
|
|
goto abort_with_ioremap;
|
|
}
|
|
myri10ge_probe_slices(mgp);
|
|
status = myri10ge_alloc_slices(mgp);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "failed to alloc slice state\n");
|
|
goto abort_with_firmware;
|
|
}
|
|
netdev->real_num_tx_queues = mgp->num_slices;
|
|
status = myri10ge_reset(mgp);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "failed reset\n");
|
|
goto abort_with_slices;
|
|
}
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
myri10ge_setup_dca(mgp);
|
|
#endif
|
|
pci_set_drvdata(pdev, mgp);
|
|
if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
|
|
myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
|
|
if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
|
|
myri10ge_initial_mtu = 68;
|
|
netdev->mtu = myri10ge_initial_mtu;
|
|
netdev->open = myri10ge_open;
|
|
netdev->stop = myri10ge_close;
|
|
netdev->hard_start_xmit = myri10ge_xmit;
|
|
netdev->get_stats = myri10ge_get_stats;
|
|
netdev->base_addr = mgp->iomem_base;
|
|
netdev->change_mtu = myri10ge_change_mtu;
|
|
netdev->set_multicast_list = myri10ge_set_multicast_list;
|
|
netdev->set_mac_address = myri10ge_set_mac_address;
|
|
netdev->features = mgp->features;
|
|
|
|
if (dac_enabled)
|
|
netdev->features |= NETIF_F_HIGHDMA;
|
|
|
|
/* make sure we can get an irq, and that MSI can be
|
|
* setup (if available). Also ensure netdev->irq
|
|
* is set to correct value if MSI is enabled */
|
|
status = myri10ge_request_irq(mgp);
|
|
if (status != 0)
|
|
goto abort_with_firmware;
|
|
netdev->irq = pdev->irq;
|
|
myri10ge_free_irq(mgp);
|
|
|
|
/* Save configuration space to be restored if the
|
|
* nic resets due to a parity error */
|
|
pci_save_state(pdev);
|
|
|
|
/* Setup the watchdog timer */
|
|
setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
|
|
(unsigned long)mgp);
|
|
|
|
SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
|
|
INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
|
|
status = register_netdev(netdev);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
|
|
goto abort_with_state;
|
|
}
|
|
if (mgp->msix_enabled)
|
|
dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
|
|
mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
|
|
(mgp->wc_enabled ? "Enabled" : "Disabled"));
|
|
else
|
|
dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
|
|
mgp->msi_enabled ? "MSI" : "xPIC",
|
|
netdev->irq, mgp->tx_boundary, mgp->fw_name,
|
|
(mgp->wc_enabled ? "Enabled" : "Disabled"));
|
|
|
|
return 0;
|
|
|
|
abort_with_state:
|
|
pci_restore_state(pdev);
|
|
|
|
abort_with_slices:
|
|
myri10ge_free_slices(mgp);
|
|
|
|
abort_with_firmware:
|
|
myri10ge_dummy_rdma(mgp, 0);
|
|
|
|
abort_with_ioremap:
|
|
iounmap(mgp->sram);
|
|
|
|
abort_with_mtrr:
|
|
#ifdef CONFIG_MTRR
|
|
if (mgp->mtrr >= 0)
|
|
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
|
|
#endif
|
|
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
|
mgp->cmd, mgp->cmd_bus);
|
|
|
|
abort_with_netdev:
|
|
|
|
free_netdev(netdev);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* myri10ge_remove
|
|
*
|
|
* Does what is necessary to shutdown one Myrinet device. Called
|
|
* once for each Myrinet card by the kernel when a module is
|
|
* unloaded.
|
|
*/
|
|
static void myri10ge_remove(struct pci_dev *pdev)
|
|
{
|
|
struct myri10ge_priv *mgp;
|
|
struct net_device *netdev;
|
|
|
|
mgp = pci_get_drvdata(pdev);
|
|
if (mgp == NULL)
|
|
return;
|
|
|
|
flush_scheduled_work();
|
|
netdev = mgp->dev;
|
|
unregister_netdev(netdev);
|
|
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
myri10ge_teardown_dca(mgp);
|
|
#endif
|
|
myri10ge_dummy_rdma(mgp, 0);
|
|
|
|
/* avoid a memory leak */
|
|
pci_restore_state(pdev);
|
|
|
|
iounmap(mgp->sram);
|
|
|
|
#ifdef CONFIG_MTRR
|
|
if (mgp->mtrr >= 0)
|
|
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
|
|
#endif
|
|
myri10ge_free_slices(mgp);
|
|
if (mgp->msix_vectors != NULL)
|
|
kfree(mgp->msix_vectors);
|
|
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
|
mgp->cmd, mgp->cmd_bus);
|
|
|
|
free_netdev(netdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
|
|
#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
|
|
|
|
static struct pci_device_id myri10ge_pci_tbl[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
|
|
{PCI_DEVICE
|
|
(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
|
|
{0},
|
|
};
|
|
|
|
static struct pci_driver myri10ge_driver = {
|
|
.name = "myri10ge",
|
|
.probe = myri10ge_probe,
|
|
.remove = myri10ge_remove,
|
|
.id_table = myri10ge_pci_tbl,
|
|
#ifdef CONFIG_PM
|
|
.suspend = myri10ge_suspend,
|
|
.resume = myri10ge_resume,
|
|
#endif
|
|
};
|
|
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
static int
|
|
myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
|
|
{
|
|
int err = driver_for_each_device(&myri10ge_driver.driver,
|
|
NULL, &event,
|
|
myri10ge_notify_dca_device);
|
|
|
|
if (err)
|
|
return NOTIFY_BAD;
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block myri10ge_dca_notifier = {
|
|
.notifier_call = myri10ge_notify_dca,
|
|
.next = NULL,
|
|
.priority = 0,
|
|
};
|
|
#endif /* CONFIG_DCA */
|
|
|
|
static __init int myri10ge_init_module(void)
|
|
{
|
|
printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
|
|
MYRI10GE_VERSION_STR);
|
|
|
|
if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
|
|
printk(KERN_ERR
|
|
"%s: Illegal rssh hash type %d, defaulting to source port\n",
|
|
myri10ge_driver.name, myri10ge_rss_hash);
|
|
myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
|
|
}
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
dca_register_notify(&myri10ge_dca_notifier);
|
|
#endif
|
|
if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
|
|
myri10ge_max_slices = MYRI10GE_MAX_SLICES;
|
|
|
|
return pci_register_driver(&myri10ge_driver);
|
|
}
|
|
|
|
module_init(myri10ge_init_module);
|
|
|
|
static __exit void myri10ge_cleanup_module(void)
|
|
{
|
|
#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
|
|
dca_unregister_notify(&myri10ge_dca_notifier);
|
|
#endif
|
|
pci_unregister_driver(&myri10ge_driver);
|
|
}
|
|
|
|
module_exit(myri10ge_cleanup_module);
|