android_kernel_xiaomi_sm8350/arch/ia64/kernel/vmlinux.lds.S
Tony Luck 10617bbe84 [IA64] Ensure cpu0 can access per-cpu variables in early boot code
ia64 handles per-cpu variables a litle differently from other architectures
in that it maps the physical memory allocated for each cpu at a constant
virtual address (0xffffffffffff0000). This mapping is not enabled until
the architecture specific cpu_init() function is run, which causes problems
since some generic code is run before this point. In particular when
CONFIG_PRINTK_TIME is enabled, the boot cpu will trap on the access to
per-cpu memory at the first printk() call so the boot will fail without
the kernel printing anything to the console.

Fix this by allocating percpu memory for cpu0 in the kernel data section
and doing all initialization to enable percpu access in head.S before
calling any generic code.

Other cpus must take care not to access per-cpu variables too early, but
their code path from start_secondary() to cpu_init() is all in arch/ia64

Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-12 10:34:20 -07:00

298 lines
7.1 KiB
ArmAsm

#include <asm/cache.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm-generic/vmlinux.lds.h>
#define IVT_TEXT \
VMLINUX_SYMBOL(__start_ivt_text) = .; \
*(.text.ivt) \
VMLINUX_SYMBOL(__end_ivt_text) = .;
OUTPUT_FORMAT("elf64-ia64-little")
OUTPUT_ARCH(ia64)
ENTRY(phys_start)
jiffies = jiffies_64;
PHDRS {
code PT_LOAD;
percpu PT_LOAD;
data PT_LOAD;
note PT_NOTE;
unwind 0x70000001; /* PT_IA_64_UNWIND, but ld doesn't match the name */
}
SECTIONS
{
/* Sections to be discarded */
/DISCARD/ : {
EXIT_TEXT
EXIT_DATA
*(.exitcall.exit)
*(.IA_64.unwind.exit.text)
*(.IA_64.unwind_info.exit.text)
}
v = PAGE_OFFSET; /* this symbol is here to make debugging easier... */
phys_start = _start - LOAD_OFFSET;
code : { } :code
. = KERNEL_START;
_text = .;
_stext = .;
.text : AT(ADDR(.text) - LOAD_OFFSET)
{
IVT_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
*(.gnu.linkonce.t*)
}
.text.head : AT(ADDR(.text.head) - LOAD_OFFSET)
{ *(.text.head) }
.text2 : AT(ADDR(.text2) - LOAD_OFFSET)
{ *(.text2) }
#ifdef CONFIG_SMP
.text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET)
{ *(.text.lock) }
#endif
_etext = .;
/* Read-only data */
NOTES :code :note /* put .notes in text and mark in PT_NOTE */
code_continues : {} :code /* switch back to regular program... */
/* Exception table */
. = ALIGN(16);
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET)
{
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
/* MCA table */
. = ALIGN(16);
__mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET)
{
__start___mca_table = .;
*(__mca_table)
__stop___mca_table = .;
}
.data.patch.phys_stack_reg : AT(ADDR(.data.patch.phys_stack_reg) - LOAD_OFFSET)
{
__start___phys_stack_reg_patchlist = .;
*(.data.patch.phys_stack_reg)
__end___phys_stack_reg_patchlist = .;
}
/* Global data */
_data = .;
/* Unwind info & table: */
. = ALIGN(8);
.IA_64.unwind_info : AT(ADDR(.IA_64.unwind_info) - LOAD_OFFSET)
{ *(.IA_64.unwind_info*) }
.IA_64.unwind : AT(ADDR(.IA_64.unwind) - LOAD_OFFSET)
{
__start_unwind = .;
*(.IA_64.unwind*)
__end_unwind = .;
} :code :unwind
code_continues2 : {} : code
RODATA
.opd : AT(ADDR(.opd) - LOAD_OFFSET)
{ *(.opd) }
/* Initialization code and data: */
. = ALIGN(PAGE_SIZE);
__init_begin = .;
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET)
{
_sinittext = .;
INIT_TEXT
_einittext = .;
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET)
{ INIT_DATA }
#ifdef CONFIG_BLK_DEV_INITRD
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET)
{
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
. = ALIGN(16);
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET)
{
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET)
{
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
{
__start___vtop_patchlist = .;
*(.data.patch.vtop)
__end___vtop_patchlist = .;
}
.data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
{
__start___rse_patchlist = .;
*(.data.patch.rse)
__end___rse_patchlist = .;
}
.data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
{
__start___mckinley_e9_bundles = .;
*(.data.patch.mckinley_e9)
__end___mckinley_e9_bundles = .;
}
#if defined(CONFIG_IA64_GENERIC)
/* Machine Vector */
. = ALIGN(16);
.machvec : AT(ADDR(.machvec) - LOAD_OFFSET)
{
machvec_start = .;
*(.machvec)
machvec_end = .;
}
#endif
. = ALIGN(8);
__con_initcall_start = .;
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET)
{ *(.con_initcall.init) }
__con_initcall_end = .;
__security_initcall_start = .;
.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET)
{ *(.security_initcall.init) }
__security_initcall_end = .;
. = ALIGN(PAGE_SIZE);
__init_end = .;
/* The initial task and kernel stack */
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET)
{ *(.data.init_task) }
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
{ *(__special_page_section)
__start_gate_section = .;
*(.data.gate)
__stop_gate_section = .;
}
. = ALIGN(PAGE_SIZE); /* make sure the gate page doesn't expose
* kernel data
*/
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET)
{ *(.data.read_mostly) }
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET)
{ *(.data.cacheline_aligned) }
/* Per-cpu data: */
percpu : { } :percpu
. = ALIGN(PERCPU_PAGE_SIZE);
#ifdef CONFIG_SMP
. = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */
#endif
__phys_per_cpu_start = .;
.data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
{
__per_cpu_start = .;
*(.data.percpu)
*(.data.percpu.shared_aligned)
__per_cpu_end = .;
}
. = __phys_per_cpu_start + PERCPU_PAGE_SIZE; /* ensure percpu data fits
* into percpu page size
*/
data : { } :data
.data : AT(ADDR(.data) - LOAD_OFFSET)
{
DATA_DATA
*(.data1)
*(.gnu.linkonce.d*)
CONSTRUCTORS
}
. = ALIGN(16); /* gp must be 16-byte aligned for exc. table */
.got : AT(ADDR(.got) - LOAD_OFFSET)
{ *(.got.plt) *(.got) }
__gp = ADDR(.got) + 0x200000;
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata : AT(ADDR(.sdata) - LOAD_OFFSET)
{ *(.sdata) *(.sdata1) *(.srdata) }
_edata = .;
__bss_start = .;
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET)
{ *(.sbss) *(.scommon) }
.bss : AT(ADDR(.bss) - LOAD_OFFSET)
{ *(.bss) *(COMMON) }
__bss_stop = .;
_end = .;
code : { } :code
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/* These must appear regardless of . */
/DISCARD/ : { *(.comment) }
/DISCARD/ : { *(.note) }
}