android_kernel_xiaomi_sm8350/arch/powerpc/platforms/pasemi/setup.c
Olof Johansson de0c74e7f9 [POWERPC] pasemi: Don't reset mpic at boot
Due to an erratum, we don't want to reset the mpic at boot time. It can
sometimes cause problems with lost interrupts later on while running.

Signed-off-by: Olof Johansson <olof@lixom.net>
2007-11-19 19:27:17 -06:00

415 lines
9.7 KiB
C

/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* Authors: Kip Walker, PA Semi
* Olof Johansson, PA Semi
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Based on arch/powerpc/platforms/maple/setup.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/smp.h>
#include <asm/time.h>
#include <asm/of_platform.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include "pasemi.h"
/* SDC reset register, must be pre-mapped at reset time */
static void __iomem *reset_reg;
/* Various error status registers, must be pre-mapped at MCE time */
#define MAX_MCE_REGS 32
struct mce_regs {
char *name;
void __iomem *addr;
};
static struct mce_regs mce_regs[MAX_MCE_REGS];
static int num_mce_regs;
static void pas_restart(char *cmd)
{
printk("Restarting...\n");
while (1)
out_le32(reset_reg, 0x6000000);
}
#ifdef CONFIG_SMP
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
}
static void __devinit pas_take_timebase(void)
{
while (!timebase)
smp_rmb();
spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {
.probe = smp_mpic_probe,
.message_pass = smp_mpic_message_pass,
.kick_cpu = smp_generic_kick_cpu,
.setup_cpu = smp_mpic_setup_cpu,
.give_timebase = pas_give_timebase,
.take_timebase = pas_take_timebase,
};
#endif /* CONFIG_SMP */
void __init pas_setup_arch(void)
{
#ifdef CONFIG_SMP
/* Setup SMP callback */
smp_ops = &pas_smp_ops;
#endif
/* Lookup PCI hosts */
pas_pci_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
/* Remap SDC register for doing reset */
/* XXXOJN This should maybe come out of the device tree */
reset_reg = ioremap(0xfc101100, 4);
}
static int __init pas_setup_mce_regs(void)
{
struct pci_dev *dev;
int reg;
if (!machine_is(pasemi))
return -ENODEV;
/* Remap various SoC status registers for use by the MCE handler */
reg = 0;
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL);
while (dev && reg < MAX_MCE_REGS) {
mce_regs[reg].name = kasprintf(GFP_KERNEL,
"mc%d_mcdebug_errsta", reg);
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730);
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev);
reg++;
}
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
if (dev && reg+4 < MAX_MCE_REGS) {
mce_regs[reg].name = "iobdbg_IntStatus1";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438);
reg++;
mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454);
reg++;
mce_regs[reg].name = "iobiom_IntStatus";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10);
reg++;
mce_regs[reg].name = "iobiom_IntDbgReg";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c);
reg++;
}
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL);
if (dev && reg+2 < MAX_MCE_REGS) {
mce_regs[reg].name = "l2csts_IntStatus";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200);
reg++;
mce_regs[reg].name = "l2csts_Cnt";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214);
reg++;
}
num_mce_regs = reg;
return 0;
}
device_initcall(pas_setup_mce_regs);
static __init void pas_init_IRQ(void)
{
struct device_node *np;
struct device_node *root, *mpic_node;
unsigned long openpic_addr;
const unsigned int *opprop;
int naddr, opplen;
struct mpic *mpic;
mpic_node = NULL;
for_each_node_by_type(np, "interrupt-controller")
if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
if (!mpic_node)
for_each_node_by_type(np, "open-pic") {
mpic_node = np;
break;
}
if (!mpic_node) {
printk(KERN_ERR
"Failed to locate the MPIC interrupt controller\n");
return;
}
/* Find address list in /platform-open-pic */
root = of_find_node_by_path("/");
naddr = of_n_addr_cells(root);
opprop = of_get_property(root, "platform-open-pic", &opplen);
if (!opprop) {
printk(KERN_ERR "No platform-open-pic property.\n");
of_node_put(root);
return;
}
openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
mpic = mpic_alloc(mpic_node, openpic_addr,
MPIC_PRIMARY|MPIC_LARGE_VECTORS,
0, 0, " PAS-OPIC ");
BUG_ON(!mpic);
mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
mpic_init(mpic);
of_node_put(mpic_node);
of_node_put(root);
}
static void __init pas_progress(char *s, unsigned short hex)
{
printk("[%04x] : %s\n", hex, s ? s : "");
}
static int pas_machine_check_handler(struct pt_regs *regs)
{
int cpu = smp_processor_id();
unsigned long srr0, srr1, dsisr;
int dump_slb = 0;
int i;
srr0 = regs->nip;
srr1 = regs->msr;
dsisr = mfspr(SPRN_DSISR);
printk(KERN_ERR "Machine Check on CPU %d\n", cpu);
printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1);
printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar);
printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER),
mfspr(SPRN_PA6T_MER));
printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER),
mfspr(SPRN_PA6T_DER));
printk(KERN_ERR "Cause:\n");
if (srr1 & 0x200000)
printk(KERN_ERR "Signalled by SDC\n");
if (srr1 & 0x100000) {
printk(KERN_ERR "Load/Store detected error:\n");
if (dsisr & 0x8000)
printk(KERN_ERR "D-cache ECC double-bit error or bus error\n");
if (dsisr & 0x4000)
printk(KERN_ERR "LSU snoop response error\n");
if (dsisr & 0x2000) {
printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n");
dump_slb = 1;
}
if (dsisr & 0x1000)
printk(KERN_ERR "Recoverable Duptags\n");
if (dsisr & 0x800)
printk(KERN_ERR "Recoverable D-cache parity error count overflow\n");
if (dsisr & 0x400)
printk(KERN_ERR "TLB parity error count overflow\n");
}
if (srr1 & 0x80000)
printk(KERN_ERR "Bus Error\n");
if (srr1 & 0x40000) {
printk(KERN_ERR "I-side SLB multiple hit\n");
dump_slb = 1;
}
if (srr1 & 0x20000)
printk(KERN_ERR "I-cache parity error hit\n");
if (num_mce_regs == 0)
printk(KERN_ERR "No MCE registers mapped yet, can't dump\n");
else
printk(KERN_ERR "SoC debug registers:\n");
for (i = 0; i < num_mce_regs; i++)
printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name,
in_le32(mce_regs[i].addr));
if (dump_slb) {
unsigned long e, v;
int i;
printk(KERN_ERR "slb contents:\n");
for (i = 0; i < SLB_NUM_ENTRIES; i++) {
asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i));
asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i));
printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v);
}
}
/* SRR1[62] is from MSR[62] if recoverable, so pass that back */
return !!(srr1 & 0x2);
}
static void __init pas_init_early(void)
{
iommu_init_early_pasemi();
}
#ifdef CONFIG_PCMCIA
static int pcmcia_notify(struct notifier_block *nb, unsigned long action,
void *data)
{
struct device *dev = data;
struct device *parent;
struct pcmcia_device *pdev = to_pcmcia_dev(dev);
/* We are only intereted in device addition */
if (action != BUS_NOTIFY_ADD_DEVICE)
return 0;
parent = pdev->socket->dev.parent;
/* We know electra_cf devices will always have of_node set, since
* electra_cf is an of_platform driver.
*/
if (!parent->archdata.of_node)
return 0;
if (!of_device_is_compatible(parent->archdata.of_node, "electra-cf"))
return 0;
/* We use the direct ops for localbus */
dev->archdata.dma_ops = &dma_direct_ops;
return 0;
}
static struct notifier_block pcmcia_notifier = {
.notifier_call = pcmcia_notify,
};
static inline void pasemi_pcmcia_init(void)
{
extern struct bus_type pcmcia_bus_type;
bus_register_notifier(&pcmcia_bus_type, &pcmcia_notifier);
}
#else
static inline void pasemi_pcmcia_init(void)
{
}
#endif
static struct of_device_id pasemi_bus_ids[] = {
{ .type = "localbus", },
{ .type = "sdc", },
{},
};
static int __init pasemi_publish_devices(void)
{
if (!machine_is(pasemi))
return 0;
pasemi_pcmcia_init();
/* Publish OF platform devices for SDC and other non-PCI devices */
of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
return 0;
}
device_initcall(pasemi_publish_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init pas_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "PA6T-1682M"))
return 0;
hpte_init_native();
alloc_iobmap_l2();
return 1;
}
define_machine(pasemi) {
.name = "PA Semi PA6T-1682M",
.probe = pas_probe,
.setup_arch = pas_setup_arch,
.init_early = pas_init_early,
.init_IRQ = pas_init_IRQ,
.get_irq = mpic_get_irq,
.restart = pas_restart,
.get_boot_time = pas_get_boot_time,
.calibrate_decr = generic_calibrate_decr,
.progress = pas_progress,
.machine_check_exception = pas_machine_check_handler,
};