1eca4365be
There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
3717 lines
93 KiB
C
3717 lines
93 KiB
C
/*
|
|
* libata-scsi.c - helper library for ATA
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available from
|
|
* - http://www.t10.org/
|
|
* - http://www.t13.org/
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/spinlock.h>
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_eh.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/scsi_transport.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include "libata.h"
|
|
|
|
#define SECTOR_SIZE 512
|
|
#define ATA_SCSI_RBUF_SIZE 4096
|
|
|
|
static DEFINE_SPINLOCK(ata_scsi_rbuf_lock);
|
|
static u8 ata_scsi_rbuf[ATA_SCSI_RBUF_SIZE];
|
|
|
|
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc);
|
|
|
|
static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
|
|
const struct scsi_device *scsidev);
|
|
static struct ata_device *ata_scsi_find_dev(struct ata_port *ap,
|
|
const struct scsi_device *scsidev);
|
|
static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
|
|
unsigned int id, unsigned int lun);
|
|
|
|
|
|
#define RW_RECOVERY_MPAGE 0x1
|
|
#define RW_RECOVERY_MPAGE_LEN 12
|
|
#define CACHE_MPAGE 0x8
|
|
#define CACHE_MPAGE_LEN 20
|
|
#define CONTROL_MPAGE 0xa
|
|
#define CONTROL_MPAGE_LEN 12
|
|
#define ALL_MPAGES 0x3f
|
|
#define ALL_SUB_MPAGES 0xff
|
|
|
|
|
|
static const u8 def_rw_recovery_mpage[RW_RECOVERY_MPAGE_LEN] = {
|
|
RW_RECOVERY_MPAGE,
|
|
RW_RECOVERY_MPAGE_LEN - 2,
|
|
(1 << 7), /* AWRE */
|
|
0, /* read retry count */
|
|
0, 0, 0, 0,
|
|
0, /* write retry count */
|
|
0, 0, 0
|
|
};
|
|
|
|
static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
|
|
CACHE_MPAGE,
|
|
CACHE_MPAGE_LEN - 2,
|
|
0, /* contains WCE, needs to be 0 for logic */
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, /* contains DRA, needs to be 0 for logic */
|
|
0, 0, 0, 0, 0, 0, 0
|
|
};
|
|
|
|
static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
|
|
CONTROL_MPAGE,
|
|
CONTROL_MPAGE_LEN - 2,
|
|
2, /* DSENSE=0, GLTSD=1 */
|
|
0, /* [QAM+QERR may be 1, see 05-359r1] */
|
|
0, 0, 0, 0, 0xff, 0xff,
|
|
0, 30 /* extended self test time, see 05-359r1 */
|
|
};
|
|
|
|
/*
|
|
* libata transport template. libata doesn't do real transport stuff.
|
|
* It just needs the eh_timed_out hook.
|
|
*/
|
|
static struct scsi_transport_template ata_scsi_transport_template = {
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.eh_timed_out = ata_scsi_timed_out,
|
|
.user_scan = ata_scsi_user_scan,
|
|
};
|
|
|
|
|
|
static const struct {
|
|
enum link_pm value;
|
|
const char *name;
|
|
} link_pm_policy[] = {
|
|
{ NOT_AVAILABLE, "max_performance" },
|
|
{ MIN_POWER, "min_power" },
|
|
{ MAX_PERFORMANCE, "max_performance" },
|
|
{ MEDIUM_POWER, "medium_power" },
|
|
};
|
|
|
|
static const char *ata_scsi_lpm_get(enum link_pm policy)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++)
|
|
if (link_pm_policy[i].value == policy)
|
|
return link_pm_policy[i].name;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static ssize_t ata_scsi_lpm_put(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
enum link_pm policy = 0;
|
|
int i;
|
|
|
|
/*
|
|
* we are skipping array location 0 on purpose - this
|
|
* is because a value of NOT_AVAILABLE is displayed
|
|
* to the user as max_performance, but when the user
|
|
* writes "max_performance", they actually want the
|
|
* value to match MAX_PERFORMANCE.
|
|
*/
|
|
for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) {
|
|
const int len = strlen(link_pm_policy[i].name);
|
|
if (strncmp(link_pm_policy[i].name, buf, len) == 0 &&
|
|
buf[len] == '\n') {
|
|
policy = link_pm_policy[i].value;
|
|
break;
|
|
}
|
|
}
|
|
if (!policy)
|
|
return -EINVAL;
|
|
|
|
ata_lpm_schedule(ap, policy);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
ata_scsi_lpm_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
const char *policy =
|
|
ata_scsi_lpm_get(ap->pm_policy);
|
|
|
|
if (!policy)
|
|
return -EINVAL;
|
|
|
|
return snprintf(buf, 23, "%s\n", policy);
|
|
}
|
|
DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
|
|
ata_scsi_lpm_show, ata_scsi_lpm_put);
|
|
EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
|
|
|
|
static ssize_t ata_scsi_park_show(struct device *device,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct scsi_device *sdev = to_scsi_device(device);
|
|
struct ata_port *ap;
|
|
struct ata_link *link;
|
|
struct ata_device *dev;
|
|
unsigned long flags, now;
|
|
unsigned int uninitialized_var(msecs);
|
|
int rc = 0;
|
|
|
|
ap = ata_shost_to_port(sdev->host);
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
dev = ata_scsi_find_dev(ap, sdev);
|
|
if (!dev) {
|
|
rc = -ENODEV;
|
|
goto unlock;
|
|
}
|
|
if (dev->flags & ATA_DFLAG_NO_UNLOAD) {
|
|
rc = -EOPNOTSUPP;
|
|
goto unlock;
|
|
}
|
|
|
|
link = dev->link;
|
|
now = jiffies;
|
|
if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS &&
|
|
link->eh_context.unloaded_mask & (1 << dev->devno) &&
|
|
time_after(dev->unpark_deadline, now))
|
|
msecs = jiffies_to_msecs(dev->unpark_deadline - now);
|
|
else
|
|
msecs = 0;
|
|
|
|
unlock:
|
|
spin_unlock_irq(ap->lock);
|
|
|
|
return rc ? rc : snprintf(buf, 20, "%u\n", msecs);
|
|
}
|
|
|
|
static ssize_t ata_scsi_park_store(struct device *device,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct scsi_device *sdev = to_scsi_device(device);
|
|
struct ata_port *ap;
|
|
struct ata_device *dev;
|
|
long int input;
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
rc = strict_strtol(buf, 10, &input);
|
|
if (rc || input < -2)
|
|
return -EINVAL;
|
|
if (input > ATA_TMOUT_MAX_PARK) {
|
|
rc = -EOVERFLOW;
|
|
input = ATA_TMOUT_MAX_PARK;
|
|
}
|
|
|
|
ap = ata_shost_to_port(sdev->host);
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
dev = ata_scsi_find_dev(ap, sdev);
|
|
if (unlikely(!dev)) {
|
|
rc = -ENODEV;
|
|
goto unlock;
|
|
}
|
|
if (dev->class != ATA_DEV_ATA) {
|
|
rc = -EOPNOTSUPP;
|
|
goto unlock;
|
|
}
|
|
|
|
if (input >= 0) {
|
|
if (dev->flags & ATA_DFLAG_NO_UNLOAD) {
|
|
rc = -EOPNOTSUPP;
|
|
goto unlock;
|
|
}
|
|
|
|
dev->unpark_deadline = ata_deadline(jiffies, input);
|
|
dev->link->eh_info.dev_action[dev->devno] |= ATA_EH_PARK;
|
|
ata_port_schedule_eh(ap);
|
|
complete(&ap->park_req_pending);
|
|
} else {
|
|
switch (input) {
|
|
case -1:
|
|
dev->flags &= ~ATA_DFLAG_NO_UNLOAD;
|
|
break;
|
|
case -2:
|
|
dev->flags |= ATA_DFLAG_NO_UNLOAD;
|
|
break;
|
|
}
|
|
}
|
|
unlock:
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
return rc ? rc : len;
|
|
}
|
|
DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
|
|
ata_scsi_park_show, ata_scsi_park_store);
|
|
EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
|
|
|
|
static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
|
|
{
|
|
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
|
|
|
|
scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
|
|
}
|
|
|
|
static ssize_t
|
|
ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM))
|
|
return ap->ops->em_store(ap, buf, count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static ssize_t
|
|
ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
|
|
if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM))
|
|
return ap->ops->em_show(ap, buf);
|
|
return -EINVAL;
|
|
}
|
|
DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
|
|
ata_scsi_em_message_show, ata_scsi_em_message_store);
|
|
EXPORT_SYMBOL_GPL(dev_attr_em_message);
|
|
|
|
static ssize_t
|
|
ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
|
|
return snprintf(buf, 23, "%d\n", ap->em_message_type);
|
|
}
|
|
DEVICE_ATTR(em_message_type, S_IRUGO,
|
|
ata_scsi_em_message_type_show, NULL);
|
|
EXPORT_SYMBOL_GPL(dev_attr_em_message_type);
|
|
|
|
static ssize_t
|
|
ata_scsi_activity_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct scsi_device *sdev = to_scsi_device(dev);
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
|
|
|
|
if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY))
|
|
return ap->ops->sw_activity_show(atadev, buf);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static ssize_t
|
|
ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct scsi_device *sdev = to_scsi_device(dev);
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
|
|
enum sw_activity val;
|
|
int rc;
|
|
|
|
if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
|
|
val = simple_strtoul(buf, NULL, 0);
|
|
switch (val) {
|
|
case OFF: case BLINK_ON: case BLINK_OFF:
|
|
rc = ap->ops->sw_activity_store(atadev, val);
|
|
if (!rc)
|
|
return count;
|
|
else
|
|
return rc;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
|
|
ata_scsi_activity_store);
|
|
EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
|
|
|
|
struct device_attribute *ata_common_sdev_attrs[] = {
|
|
&dev_attr_unload_heads,
|
|
NULL
|
|
};
|
|
EXPORT_SYMBOL_GPL(ata_common_sdev_attrs);
|
|
|
|
static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
|
|
void (*done)(struct scsi_cmnd *))
|
|
{
|
|
ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
|
|
/* "Invalid field in cbd" */
|
|
done(cmd);
|
|
}
|
|
|
|
/**
|
|
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
|
|
* @sdev: SCSI device for which BIOS geometry is to be determined
|
|
* @bdev: block device associated with @sdev
|
|
* @capacity: capacity of SCSI device
|
|
* @geom: location to which geometry will be output
|
|
*
|
|
* Generic bios head/sector/cylinder calculator
|
|
* used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS)
|
|
* mapping. Some situations may arise where the disk is not
|
|
* bootable if this is not used.
|
|
*
|
|
* LOCKING:
|
|
* Defined by the SCSI layer. We don't really care.
|
|
*
|
|
* RETURNS:
|
|
* Zero.
|
|
*/
|
|
int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
|
|
sector_t capacity, int geom[])
|
|
{
|
|
geom[0] = 255;
|
|
geom[1] = 63;
|
|
sector_div(capacity, 255*63);
|
|
geom[2] = capacity;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
|
|
* @sdev: SCSI device to get identify data for
|
|
* @arg: User buffer area for identify data
|
|
*
|
|
* LOCKING:
|
|
* Defined by the SCSI layer. We don't really care.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, negative errno on error.
|
|
*/
|
|
static int ata_get_identity(struct scsi_device *sdev, void __user *arg)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
|
|
u16 __user *dst = arg;
|
|
char buf[40];
|
|
|
|
if (!dev)
|
|
return -ENOMSG;
|
|
|
|
if (copy_to_user(dst, dev->id, ATA_ID_WORDS * sizeof(u16)))
|
|
return -EFAULT;
|
|
|
|
ata_id_string(dev->id, buf, ATA_ID_PROD, ATA_ID_PROD_LEN);
|
|
if (copy_to_user(dst + ATA_ID_PROD, buf, ATA_ID_PROD_LEN))
|
|
return -EFAULT;
|
|
|
|
ata_id_string(dev->id, buf, ATA_ID_FW_REV, ATA_ID_FW_REV_LEN);
|
|
if (copy_to_user(dst + ATA_ID_FW_REV, buf, ATA_ID_FW_REV_LEN))
|
|
return -EFAULT;
|
|
|
|
ata_id_string(dev->id, buf, ATA_ID_SERNO, ATA_ID_SERNO_LEN);
|
|
if (copy_to_user(dst + ATA_ID_SERNO, buf, ATA_ID_SERNO_LEN))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
|
|
* @scsidev: Device to which we are issuing command
|
|
* @arg: User provided data for issuing command
|
|
*
|
|
* LOCKING:
|
|
* Defined by the SCSI layer. We don't really care.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, negative errno on error.
|
|
*/
|
|
int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
|
|
{
|
|
int rc = 0;
|
|
u8 scsi_cmd[MAX_COMMAND_SIZE];
|
|
u8 args[4], *argbuf = NULL, *sensebuf = NULL;
|
|
int argsize = 0;
|
|
enum dma_data_direction data_dir;
|
|
int cmd_result;
|
|
|
|
if (arg == NULL)
|
|
return -EINVAL;
|
|
|
|
if (copy_from_user(args, arg, sizeof(args)))
|
|
return -EFAULT;
|
|
|
|
sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
|
|
if (!sensebuf)
|
|
return -ENOMEM;
|
|
|
|
memset(scsi_cmd, 0, sizeof(scsi_cmd));
|
|
|
|
if (args[3]) {
|
|
argsize = SECTOR_SIZE * args[3];
|
|
argbuf = kmalloc(argsize, GFP_KERNEL);
|
|
if (argbuf == NULL) {
|
|
rc = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
scsi_cmd[1] = (4 << 1); /* PIO Data-in */
|
|
scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
|
|
block count in sector count field */
|
|
data_dir = DMA_FROM_DEVICE;
|
|
} else {
|
|
scsi_cmd[1] = (3 << 1); /* Non-data */
|
|
scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
|
|
data_dir = DMA_NONE;
|
|
}
|
|
|
|
scsi_cmd[0] = ATA_16;
|
|
|
|
scsi_cmd[4] = args[2];
|
|
if (args[0] == ATA_CMD_SMART) { /* hack -- ide driver does this too */
|
|
scsi_cmd[6] = args[3];
|
|
scsi_cmd[8] = args[1];
|
|
scsi_cmd[10] = 0x4f;
|
|
scsi_cmd[12] = 0xc2;
|
|
} else {
|
|
scsi_cmd[6] = args[1];
|
|
}
|
|
scsi_cmd[14] = args[0];
|
|
|
|
/* Good values for timeout and retries? Values below
|
|
from scsi_ioctl_send_command() for default case... */
|
|
cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize,
|
|
sensebuf, (10*HZ), 5, 0);
|
|
|
|
if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
|
|
u8 *desc = sensebuf + 8;
|
|
cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
|
|
|
|
/* If we set cc then ATA pass-through will cause a
|
|
* check condition even if no error. Filter that. */
|
|
if (cmd_result & SAM_STAT_CHECK_CONDITION) {
|
|
struct scsi_sense_hdr sshdr;
|
|
scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
|
|
&sshdr);
|
|
if (sshdr.sense_key == 0 &&
|
|
sshdr.asc == 0 && sshdr.ascq == 0)
|
|
cmd_result &= ~SAM_STAT_CHECK_CONDITION;
|
|
}
|
|
|
|
/* Send userspace a few ATA registers (same as drivers/ide) */
|
|
if (sensebuf[0] == 0x72 && /* format is "descriptor" */
|
|
desc[0] == 0x09) { /* code is "ATA Descriptor" */
|
|
args[0] = desc[13]; /* status */
|
|
args[1] = desc[3]; /* error */
|
|
args[2] = desc[5]; /* sector count (0:7) */
|
|
if (copy_to_user(arg, args, sizeof(args)))
|
|
rc = -EFAULT;
|
|
}
|
|
}
|
|
|
|
|
|
if (cmd_result) {
|
|
rc = -EIO;
|
|
goto error;
|
|
}
|
|
|
|
if ((argbuf)
|
|
&& copy_to_user(arg + sizeof(args), argbuf, argsize))
|
|
rc = -EFAULT;
|
|
error:
|
|
kfree(sensebuf);
|
|
kfree(argbuf);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
|
|
* @scsidev: Device to which we are issuing command
|
|
* @arg: User provided data for issuing command
|
|
*
|
|
* LOCKING:
|
|
* Defined by the SCSI layer. We don't really care.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, negative errno on error.
|
|
*/
|
|
int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
|
|
{
|
|
int rc = 0;
|
|
u8 scsi_cmd[MAX_COMMAND_SIZE];
|
|
u8 args[7], *sensebuf = NULL;
|
|
int cmd_result;
|
|
|
|
if (arg == NULL)
|
|
return -EINVAL;
|
|
|
|
if (copy_from_user(args, arg, sizeof(args)))
|
|
return -EFAULT;
|
|
|
|
sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
|
|
if (!sensebuf)
|
|
return -ENOMEM;
|
|
|
|
memset(scsi_cmd, 0, sizeof(scsi_cmd));
|
|
scsi_cmd[0] = ATA_16;
|
|
scsi_cmd[1] = (3 << 1); /* Non-data */
|
|
scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */
|
|
scsi_cmd[4] = args[1];
|
|
scsi_cmd[6] = args[2];
|
|
scsi_cmd[8] = args[3];
|
|
scsi_cmd[10] = args[4];
|
|
scsi_cmd[12] = args[5];
|
|
scsi_cmd[13] = args[6] & 0x4f;
|
|
scsi_cmd[14] = args[0];
|
|
|
|
/* Good values for timeout and retries? Values below
|
|
from scsi_ioctl_send_command() for default case... */
|
|
cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
|
|
sensebuf, (10*HZ), 5, 0);
|
|
|
|
if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */
|
|
u8 *desc = sensebuf + 8;
|
|
cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
|
|
|
|
/* If we set cc then ATA pass-through will cause a
|
|
* check condition even if no error. Filter that. */
|
|
if (cmd_result & SAM_STAT_CHECK_CONDITION) {
|
|
struct scsi_sense_hdr sshdr;
|
|
scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE,
|
|
&sshdr);
|
|
if (sshdr.sense_key == 0 &&
|
|
sshdr.asc == 0 && sshdr.ascq == 0)
|
|
cmd_result &= ~SAM_STAT_CHECK_CONDITION;
|
|
}
|
|
|
|
/* Send userspace ATA registers */
|
|
if (sensebuf[0] == 0x72 && /* format is "descriptor" */
|
|
desc[0] == 0x09) {/* code is "ATA Descriptor" */
|
|
args[0] = desc[13]; /* status */
|
|
args[1] = desc[3]; /* error */
|
|
args[2] = desc[5]; /* sector count (0:7) */
|
|
args[3] = desc[7]; /* lbal */
|
|
args[4] = desc[9]; /* lbam */
|
|
args[5] = desc[11]; /* lbah */
|
|
args[6] = desc[12]; /* select */
|
|
if (copy_to_user(arg, args, sizeof(args)))
|
|
rc = -EFAULT;
|
|
}
|
|
}
|
|
|
|
if (cmd_result) {
|
|
rc = -EIO;
|
|
goto error;
|
|
}
|
|
|
|
error:
|
|
kfree(sensebuf);
|
|
return rc;
|
|
}
|
|
|
|
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
|
|
{
|
|
int val = -EINVAL, rc = -EINVAL;
|
|
|
|
switch (cmd) {
|
|
case ATA_IOC_GET_IO32:
|
|
val = 0;
|
|
if (copy_to_user(arg, &val, 1))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case ATA_IOC_SET_IO32:
|
|
val = (unsigned long) arg;
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
|
|
case HDIO_GET_IDENTITY:
|
|
return ata_get_identity(scsidev, arg);
|
|
|
|
case HDIO_DRIVE_CMD:
|
|
if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
|
|
return -EACCES;
|
|
return ata_cmd_ioctl(scsidev, arg);
|
|
|
|
case HDIO_DRIVE_TASK:
|
|
if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
|
|
return -EACCES;
|
|
return ata_task_ioctl(scsidev, arg);
|
|
|
|
default:
|
|
rc = -ENOTTY;
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_qc_new - acquire new ata_queued_cmd reference
|
|
* @dev: ATA device to which the new command is attached
|
|
* @cmd: SCSI command that originated this ATA command
|
|
* @done: SCSI command completion function
|
|
*
|
|
* Obtain a reference to an unused ata_queued_cmd structure,
|
|
* which is the basic libata structure representing a single
|
|
* ATA command sent to the hardware.
|
|
*
|
|
* If a command was available, fill in the SCSI-specific
|
|
* portions of the structure with information on the
|
|
* current command.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Command allocated, or %NULL if none available.
|
|
*/
|
|
static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
|
|
struct scsi_cmnd *cmd,
|
|
void (*done)(struct scsi_cmnd *))
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_new_init(dev);
|
|
if (qc) {
|
|
qc->scsicmd = cmd;
|
|
qc->scsidone = done;
|
|
|
|
qc->sg = scsi_sglist(cmd);
|
|
qc->n_elem = scsi_sg_count(cmd);
|
|
} else {
|
|
cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
|
|
done(cmd);
|
|
}
|
|
|
|
return qc;
|
|
}
|
|
|
|
static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scsi_cmnd *scmd = qc->scsicmd;
|
|
|
|
qc->extrabytes = scmd->request->extra_len;
|
|
qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
|
|
}
|
|
|
|
/**
|
|
* ata_dump_status - user friendly display of error info
|
|
* @id: id of the port in question
|
|
* @tf: ptr to filled out taskfile
|
|
*
|
|
* Decode and dump the ATA error/status registers for the user so
|
|
* that they have some idea what really happened at the non
|
|
* make-believe layer.
|
|
*
|
|
* LOCKING:
|
|
* inherited from caller
|
|
*/
|
|
static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
|
|
{
|
|
u8 stat = tf->command, err = tf->feature;
|
|
|
|
printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
|
|
if (stat & ATA_BUSY) {
|
|
printk("Busy }\n"); /* Data is not valid in this case */
|
|
} else {
|
|
if (stat & 0x40) printk("DriveReady ");
|
|
if (stat & 0x20) printk("DeviceFault ");
|
|
if (stat & 0x10) printk("SeekComplete ");
|
|
if (stat & 0x08) printk("DataRequest ");
|
|
if (stat & 0x04) printk("CorrectedError ");
|
|
if (stat & 0x02) printk("Index ");
|
|
if (stat & 0x01) printk("Error ");
|
|
printk("}\n");
|
|
|
|
if (err) {
|
|
printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
|
|
if (err & 0x04) printk("DriveStatusError ");
|
|
if (err & 0x80) {
|
|
if (err & 0x04) printk("BadCRC ");
|
|
else printk("Sector ");
|
|
}
|
|
if (err & 0x40) printk("UncorrectableError ");
|
|
if (err & 0x10) printk("SectorIdNotFound ");
|
|
if (err & 0x02) printk("TrackZeroNotFound ");
|
|
if (err & 0x01) printk("AddrMarkNotFound ");
|
|
printk("}\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_to_sense_error - convert ATA error to SCSI error
|
|
* @id: ATA device number
|
|
* @drv_stat: value contained in ATA status register
|
|
* @drv_err: value contained in ATA error register
|
|
* @sk: the sense key we'll fill out
|
|
* @asc: the additional sense code we'll fill out
|
|
* @ascq: the additional sense code qualifier we'll fill out
|
|
* @verbose: be verbose
|
|
*
|
|
* Converts an ATA error into a SCSI error. Fill out pointers to
|
|
* SK, ASC, and ASCQ bytes for later use in fixed or descriptor
|
|
* format sense blocks.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
|
|
u8 *asc, u8 *ascq, int verbose)
|
|
{
|
|
int i;
|
|
|
|
/* Based on the 3ware driver translation table */
|
|
static const unsigned char sense_table[][4] = {
|
|
/* BBD|ECC|ID|MAR */
|
|
{0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
|
|
/* BBD|ECC|ID */
|
|
{0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
|
|
/* ECC|MC|MARK */
|
|
{0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error
|
|
/* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */
|
|
{0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error
|
|
/* MC|ID|ABRT|TRK0|MARK */
|
|
{0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready
|
|
/* MCR|MARK */
|
|
{0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready
|
|
/* Bad address mark */
|
|
{0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field
|
|
/* TRK0 */
|
|
{0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error
|
|
/* Abort & !ICRC */
|
|
{0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command
|
|
/* Media change request */
|
|
{0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline
|
|
/* SRV */
|
|
{0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found
|
|
/* Media change */
|
|
{0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline
|
|
/* ECC */
|
|
{0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error
|
|
/* BBD - block marked bad */
|
|
{0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
|
|
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
|
|
};
|
|
static const unsigned char stat_table[][4] = {
|
|
/* Must be first because BUSY means no other bits valid */
|
|
{0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now
|
|
{0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault
|
|
{0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now
|
|
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
|
|
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
|
|
};
|
|
|
|
/*
|
|
* Is this an error we can process/parse
|
|
*/
|
|
if (drv_stat & ATA_BUSY) {
|
|
drv_err = 0; /* Ignore the err bits, they're invalid */
|
|
}
|
|
|
|
if (drv_err) {
|
|
/* Look for drv_err */
|
|
for (i = 0; sense_table[i][0] != 0xFF; i++) {
|
|
/* Look for best matches first */
|
|
if ((sense_table[i][0] & drv_err) ==
|
|
sense_table[i][0]) {
|
|
*sk = sense_table[i][1];
|
|
*asc = sense_table[i][2];
|
|
*ascq = sense_table[i][3];
|
|
goto translate_done;
|
|
}
|
|
}
|
|
/* No immediate match */
|
|
if (verbose)
|
|
printk(KERN_WARNING "ata%u: no sense translation for "
|
|
"error 0x%02x\n", id, drv_err);
|
|
}
|
|
|
|
/* Fall back to interpreting status bits */
|
|
for (i = 0; stat_table[i][0] != 0xFF; i++) {
|
|
if (stat_table[i][0] & drv_stat) {
|
|
*sk = stat_table[i][1];
|
|
*asc = stat_table[i][2];
|
|
*ascq = stat_table[i][3];
|
|
goto translate_done;
|
|
}
|
|
}
|
|
/* No error? Undecoded? */
|
|
if (verbose)
|
|
printk(KERN_WARNING "ata%u: no sense translation for "
|
|
"status: 0x%02x\n", id, drv_stat);
|
|
|
|
/* We need a sensible error return here, which is tricky, and one
|
|
that won't cause people to do things like return a disk wrongly */
|
|
*sk = ABORTED_COMMAND;
|
|
*asc = 0x00;
|
|
*ascq = 0x00;
|
|
|
|
translate_done:
|
|
if (verbose)
|
|
printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x "
|
|
"to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n",
|
|
id, drv_stat, drv_err, *sk, *asc, *ascq);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* ata_gen_passthru_sense - Generate check condition sense block.
|
|
* @qc: Command that completed.
|
|
*
|
|
* This function is specific to the ATA descriptor format sense
|
|
* block specified for the ATA pass through commands. Regardless
|
|
* of whether the command errored or not, return a sense
|
|
* block. Copy all controller registers into the sense
|
|
* block. Clear sense key, ASC & ASCQ if there is no error.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scsi_cmnd *cmd = qc->scsicmd;
|
|
struct ata_taskfile *tf = &qc->result_tf;
|
|
unsigned char *sb = cmd->sense_buffer;
|
|
unsigned char *desc = sb + 8;
|
|
int verbose = qc->ap->ops->error_handler == NULL;
|
|
|
|
memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
|
|
|
|
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
|
|
|
|
/*
|
|
* Use ata_to_sense_error() to map status register bits
|
|
* onto sense key, asc & ascq.
|
|
*/
|
|
if (qc->err_mask ||
|
|
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
|
|
ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
|
|
&sb[1], &sb[2], &sb[3], verbose);
|
|
sb[1] &= 0x0f;
|
|
}
|
|
|
|
/*
|
|
* Sense data is current and format is descriptor.
|
|
*/
|
|
sb[0] = 0x72;
|
|
|
|
desc[0] = 0x09;
|
|
|
|
/* set length of additional sense data */
|
|
sb[7] = 14;
|
|
desc[1] = 12;
|
|
|
|
/*
|
|
* Copy registers into sense buffer.
|
|
*/
|
|
desc[2] = 0x00;
|
|
desc[3] = tf->feature; /* == error reg */
|
|
desc[5] = tf->nsect;
|
|
desc[7] = tf->lbal;
|
|
desc[9] = tf->lbam;
|
|
desc[11] = tf->lbah;
|
|
desc[12] = tf->device;
|
|
desc[13] = tf->command; /* == status reg */
|
|
|
|
/*
|
|
* Fill in Extend bit, and the high order bytes
|
|
* if applicable.
|
|
*/
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
desc[2] |= 0x01;
|
|
desc[4] = tf->hob_nsect;
|
|
desc[6] = tf->hob_lbal;
|
|
desc[8] = tf->hob_lbam;
|
|
desc[10] = tf->hob_lbah;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_gen_ata_sense - generate a SCSI fixed sense block
|
|
* @qc: Command that we are erroring out
|
|
*
|
|
* Generate sense block for a failed ATA command @qc. Descriptor
|
|
* format is used to accomodate LBA48 block address.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_device *dev = qc->dev;
|
|
struct scsi_cmnd *cmd = qc->scsicmd;
|
|
struct ata_taskfile *tf = &qc->result_tf;
|
|
unsigned char *sb = cmd->sense_buffer;
|
|
unsigned char *desc = sb + 8;
|
|
int verbose = qc->ap->ops->error_handler == NULL;
|
|
u64 block;
|
|
|
|
memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
|
|
|
|
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
|
|
|
|
/* sense data is current and format is descriptor */
|
|
sb[0] = 0x72;
|
|
|
|
/* Use ata_to_sense_error() to map status register bits
|
|
* onto sense key, asc & ascq.
|
|
*/
|
|
if (qc->err_mask ||
|
|
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
|
|
ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
|
|
&sb[1], &sb[2], &sb[3], verbose);
|
|
sb[1] &= 0x0f;
|
|
}
|
|
|
|
block = ata_tf_read_block(&qc->result_tf, dev);
|
|
|
|
/* information sense data descriptor */
|
|
sb[7] = 12;
|
|
desc[0] = 0x00;
|
|
desc[1] = 10;
|
|
|
|
desc[2] |= 0x80; /* valid */
|
|
desc[6] = block >> 40;
|
|
desc[7] = block >> 32;
|
|
desc[8] = block >> 24;
|
|
desc[9] = block >> 16;
|
|
desc[10] = block >> 8;
|
|
desc[11] = block;
|
|
}
|
|
|
|
static void ata_scsi_sdev_config(struct scsi_device *sdev)
|
|
{
|
|
sdev->use_10_for_rw = 1;
|
|
sdev->use_10_for_ms = 1;
|
|
|
|
/* Schedule policy is determined by ->qc_defer() callback and
|
|
* it needs to see every deferred qc. Set dev_blocked to 1 to
|
|
* prevent SCSI midlayer from automatically deferring
|
|
* requests.
|
|
*/
|
|
sdev->max_device_blocked = 1;
|
|
}
|
|
|
|
/**
|
|
* atapi_drain_needed - Check whether data transfer may overflow
|
|
* @rq: request to be checked
|
|
*
|
|
* ATAPI commands which transfer variable length data to host
|
|
* might overflow due to application error or hardare bug. This
|
|
* function checks whether overflow should be drained and ignored
|
|
* for @request.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*
|
|
* RETURNS:
|
|
* 1 if ; otherwise, 0.
|
|
*/
|
|
static int atapi_drain_needed(struct request *rq)
|
|
{
|
|
if (likely(!blk_pc_request(rq)))
|
|
return 0;
|
|
|
|
if (!rq->data_len || (rq->cmd_flags & REQ_RW))
|
|
return 0;
|
|
|
|
return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
|
|
}
|
|
|
|
static int ata_scsi_dev_config(struct scsi_device *sdev,
|
|
struct ata_device *dev)
|
|
{
|
|
if (!ata_id_has_unload(dev->id))
|
|
dev->flags |= ATA_DFLAG_NO_UNLOAD;
|
|
|
|
/* configure max sectors */
|
|
blk_queue_max_sectors(sdev->request_queue, dev->max_sectors);
|
|
|
|
if (dev->class == ATA_DEV_ATAPI) {
|
|
struct request_queue *q = sdev->request_queue;
|
|
void *buf;
|
|
|
|
/* set the min alignment and padding */
|
|
blk_queue_update_dma_alignment(sdev->request_queue,
|
|
ATA_DMA_PAD_SZ - 1);
|
|
blk_queue_update_dma_pad(sdev->request_queue,
|
|
ATA_DMA_PAD_SZ - 1);
|
|
|
|
/* configure draining */
|
|
buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
|
|
if (!buf) {
|
|
ata_dev_printk(dev, KERN_ERR,
|
|
"drain buffer allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
|
|
} else {
|
|
if (ata_id_is_ssd(dev->id))
|
|
queue_flag_set_unlocked(QUEUE_FLAG_NONROT,
|
|
sdev->request_queue);
|
|
|
|
/* ATA devices must be sector aligned */
|
|
blk_queue_update_dma_alignment(sdev->request_queue,
|
|
ATA_SECT_SIZE - 1);
|
|
sdev->manage_start_stop = 1;
|
|
}
|
|
|
|
if (dev->flags & ATA_DFLAG_AN)
|
|
set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
|
|
|
|
if (dev->flags & ATA_DFLAG_NCQ) {
|
|
int depth;
|
|
|
|
depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
|
|
depth = min(ATA_MAX_QUEUE - 1, depth);
|
|
scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_slave_config - Set SCSI device attributes
|
|
* @sdev: SCSI device to examine
|
|
*
|
|
* This is called before we actually start reading
|
|
* and writing to the device, to configure certain
|
|
* SCSI mid-layer behaviors.
|
|
*
|
|
* LOCKING:
|
|
* Defined by SCSI layer. We don't really care.
|
|
*/
|
|
|
|
int ata_scsi_slave_config(struct scsi_device *sdev)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
|
|
int rc = 0;
|
|
|
|
ata_scsi_sdev_config(sdev);
|
|
|
|
if (dev)
|
|
rc = ata_scsi_dev_config(sdev, dev);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_slave_destroy - SCSI device is about to be destroyed
|
|
* @sdev: SCSI device to be destroyed
|
|
*
|
|
* @sdev is about to be destroyed for hot/warm unplugging. If
|
|
* this unplugging was initiated by libata as indicated by NULL
|
|
* dev->sdev, this function doesn't have to do anything.
|
|
* Otherwise, SCSI layer initiated warm-unplug is in progress.
|
|
* Clear dev->sdev, schedule the device for ATA detach and invoke
|
|
* EH.
|
|
*
|
|
* LOCKING:
|
|
* Defined by SCSI layer. We don't really care.
|
|
*/
|
|
void ata_scsi_slave_destroy(struct scsi_device *sdev)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct request_queue *q = sdev->request_queue;
|
|
unsigned long flags;
|
|
struct ata_device *dev;
|
|
|
|
if (!ap->ops->error_handler)
|
|
return;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
dev = __ata_scsi_find_dev(ap, sdev);
|
|
if (dev && dev->sdev) {
|
|
/* SCSI device already in CANCEL state, no need to offline it */
|
|
dev->sdev = NULL;
|
|
dev->flags |= ATA_DFLAG_DETACH;
|
|
ata_port_schedule_eh(ap);
|
|
}
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
kfree(q->dma_drain_buffer);
|
|
q->dma_drain_buffer = NULL;
|
|
q->dma_drain_size = 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_change_queue_depth - SCSI callback for queue depth config
|
|
* @sdev: SCSI device to configure queue depth for
|
|
* @queue_depth: new queue depth
|
|
*
|
|
* This is libata standard hostt->change_queue_depth callback.
|
|
* SCSI will call into this callback when user tries to set queue
|
|
* depth via sysfs.
|
|
*
|
|
* LOCKING:
|
|
* SCSI layer (we don't care)
|
|
*
|
|
* RETURNS:
|
|
* Newly configured queue depth.
|
|
*/
|
|
int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct ata_device *dev;
|
|
unsigned long flags;
|
|
|
|
if (queue_depth < 1 || queue_depth == sdev->queue_depth)
|
|
return sdev->queue_depth;
|
|
|
|
dev = ata_scsi_find_dev(ap, sdev);
|
|
if (!dev || !ata_dev_enabled(dev))
|
|
return sdev->queue_depth;
|
|
|
|
/* NCQ enabled? */
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
dev->flags &= ~ATA_DFLAG_NCQ_OFF;
|
|
if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
|
|
dev->flags |= ATA_DFLAG_NCQ_OFF;
|
|
queue_depth = 1;
|
|
}
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
/* limit and apply queue depth */
|
|
queue_depth = min(queue_depth, sdev->host->can_queue);
|
|
queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
|
|
queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1);
|
|
|
|
if (sdev->queue_depth == queue_depth)
|
|
return -EINVAL;
|
|
|
|
scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
|
|
return queue_depth;
|
|
}
|
|
|
|
/* XXX: for spindown warning */
|
|
static void ata_delayed_done_timerfn(unsigned long arg)
|
|
{
|
|
struct scsi_cmnd *scmd = (void *)arg;
|
|
|
|
scmd->scsi_done(scmd);
|
|
}
|
|
|
|
/* XXX: for spindown warning */
|
|
static void ata_delayed_done(struct scsi_cmnd *scmd)
|
|
{
|
|
static struct timer_list timer;
|
|
|
|
setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd);
|
|
mod_timer(&timer, jiffies + 5 * HZ);
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
|
|
* @qc: Storage for translated ATA taskfile
|
|
*
|
|
* Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
|
|
* (to start). Perhaps these commands should be preceded by
|
|
* CHECK POWER MODE to see what power mode the device is already in.
|
|
* [See SAT revision 5 at www.t10.org]
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, non-zero on error.
|
|
*/
|
|
static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scsi_cmnd *scmd = qc->scsicmd;
|
|
struct ata_taskfile *tf = &qc->tf;
|
|
const u8 *cdb = scmd->cmnd;
|
|
|
|
if (scmd->cmd_len < 5)
|
|
goto invalid_fld;
|
|
|
|
tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
|
|
tf->protocol = ATA_PROT_NODATA;
|
|
if (cdb[1] & 0x1) {
|
|
; /* ignore IMMED bit, violates sat-r05 */
|
|
}
|
|
if (cdb[4] & 0x2)
|
|
goto invalid_fld; /* LOEJ bit set not supported */
|
|
if (((cdb[4] >> 4) & 0xf) != 0)
|
|
goto invalid_fld; /* power conditions not supported */
|
|
|
|
if (cdb[4] & 0x1) {
|
|
tf->nsect = 1; /* 1 sector, lba=0 */
|
|
|
|
if (qc->dev->flags & ATA_DFLAG_LBA) {
|
|
tf->flags |= ATA_TFLAG_LBA;
|
|
|
|
tf->lbah = 0x0;
|
|
tf->lbam = 0x0;
|
|
tf->lbal = 0x0;
|
|
tf->device |= ATA_LBA;
|
|
} else {
|
|
/* CHS */
|
|
tf->lbal = 0x1; /* sect */
|
|
tf->lbam = 0x0; /* cyl low */
|
|
tf->lbah = 0x0; /* cyl high */
|
|
}
|
|
|
|
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
|
|
} else {
|
|
/* XXX: This is for backward compatibility, will be
|
|
* removed. Read Documentation/feature-removal-schedule.txt
|
|
* for more info.
|
|
*/
|
|
if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
|
|
(system_state == SYSTEM_HALT ||
|
|
system_state == SYSTEM_POWER_OFF)) {
|
|
static unsigned long warned;
|
|
|
|
if (!test_and_set_bit(0, &warned)) {
|
|
ata_dev_printk(qc->dev, KERN_WARNING,
|
|
"DISK MIGHT NOT BE SPUN DOWN PROPERLY. "
|
|
"UPDATE SHUTDOWN UTILITY\n");
|
|
ata_dev_printk(qc->dev, KERN_WARNING,
|
|
"For more info, visit "
|
|
"http://linux-ata.org/shutdown.html\n");
|
|
|
|
/* ->scsi_done is not used, use it for
|
|
* delayed completion.
|
|
*/
|
|
scmd->scsi_done = qc->scsidone;
|
|
qc->scsidone = ata_delayed_done;
|
|
}
|
|
scmd->result = SAM_STAT_GOOD;
|
|
return 1;
|
|
}
|
|
|
|
/* Issue ATA STANDBY IMMEDIATE command */
|
|
tf->command = ATA_CMD_STANDBYNOW1;
|
|
}
|
|
|
|
/*
|
|
* Standby and Idle condition timers could be implemented but that
|
|
* would require libata to implement the Power condition mode page
|
|
* and allow the user to change it. Changing mode pages requires
|
|
* MODE SELECT to be implemented.
|
|
*/
|
|
|
|
return 0;
|
|
|
|
invalid_fld:
|
|
ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
|
|
/* "Invalid field in cbd" */
|
|
return 1;
|
|
}
|
|
|
|
|
|
/**
|
|
* ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
|
|
* @qc: Storage for translated ATA taskfile
|
|
*
|
|
* Sets up an ATA taskfile to issue FLUSH CACHE or
|
|
* FLUSH CACHE EXT.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, non-zero on error.
|
|
*/
|
|
static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_taskfile *tf = &qc->tf;
|
|
|
|
tf->flags |= ATA_TFLAG_DEVICE;
|
|
tf->protocol = ATA_PROT_NODATA;
|
|
|
|
if (qc->dev->flags & ATA_DFLAG_FLUSH_EXT)
|
|
tf->command = ATA_CMD_FLUSH_EXT;
|
|
else
|
|
tf->command = ATA_CMD_FLUSH;
|
|
|
|
/* flush is critical for IO integrity, consider it an IO command */
|
|
qc->flags |= ATA_QCFLAG_IO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scsi_6_lba_len - Get LBA and transfer length
|
|
* @cdb: SCSI command to translate
|
|
*
|
|
* Calculate LBA and transfer length for 6-byte commands.
|
|
*
|
|
* RETURNS:
|
|
* @plba: the LBA
|
|
* @plen: the transfer length
|
|
*/
|
|
static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
|
|
{
|
|
u64 lba = 0;
|
|
u32 len;
|
|
|
|
VPRINTK("six-byte command\n");
|
|
|
|
lba |= ((u64)(cdb[1] & 0x1f)) << 16;
|
|
lba |= ((u64)cdb[2]) << 8;
|
|
lba |= ((u64)cdb[3]);
|
|
|
|
len = cdb[4];
|
|
|
|
*plba = lba;
|
|
*plen = len;
|
|
}
|
|
|
|
/**
|
|
* scsi_10_lba_len - Get LBA and transfer length
|
|
* @cdb: SCSI command to translate
|
|
*
|
|
* Calculate LBA and transfer length for 10-byte commands.
|
|
*
|
|
* RETURNS:
|
|
* @plba: the LBA
|
|
* @plen: the transfer length
|
|
*/
|
|
static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
|
|
{
|
|
u64 lba = 0;
|
|
u32 len = 0;
|
|
|
|
VPRINTK("ten-byte command\n");
|
|
|
|
lba |= ((u64)cdb[2]) << 24;
|
|
lba |= ((u64)cdb[3]) << 16;
|
|
lba |= ((u64)cdb[4]) << 8;
|
|
lba |= ((u64)cdb[5]);
|
|
|
|
len |= ((u32)cdb[7]) << 8;
|
|
len |= ((u32)cdb[8]);
|
|
|
|
*plba = lba;
|
|
*plen = len;
|
|
}
|
|
|
|
/**
|
|
* scsi_16_lba_len - Get LBA and transfer length
|
|
* @cdb: SCSI command to translate
|
|
*
|
|
* Calculate LBA and transfer length for 16-byte commands.
|
|
*
|
|
* RETURNS:
|
|
* @plba: the LBA
|
|
* @plen: the transfer length
|
|
*/
|
|
static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
|
|
{
|
|
u64 lba = 0;
|
|
u32 len = 0;
|
|
|
|
VPRINTK("sixteen-byte command\n");
|
|
|
|
lba |= ((u64)cdb[2]) << 56;
|
|
lba |= ((u64)cdb[3]) << 48;
|
|
lba |= ((u64)cdb[4]) << 40;
|
|
lba |= ((u64)cdb[5]) << 32;
|
|
lba |= ((u64)cdb[6]) << 24;
|
|
lba |= ((u64)cdb[7]) << 16;
|
|
lba |= ((u64)cdb[8]) << 8;
|
|
lba |= ((u64)cdb[9]);
|
|
|
|
len |= ((u32)cdb[10]) << 24;
|
|
len |= ((u32)cdb[11]) << 16;
|
|
len |= ((u32)cdb[12]) << 8;
|
|
len |= ((u32)cdb[13]);
|
|
|
|
*plba = lba;
|
|
*plen = len;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
|
|
* @qc: Storage for translated ATA taskfile
|
|
*
|
|
* Converts SCSI VERIFY command to an ATA READ VERIFY command.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, non-zero on error.
|
|
*/
|
|
static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scsi_cmnd *scmd = qc->scsicmd;
|
|
struct ata_taskfile *tf = &qc->tf;
|
|
struct ata_device *dev = qc->dev;
|
|
u64 dev_sectors = qc->dev->n_sectors;
|
|
const u8 *cdb = scmd->cmnd;
|
|
u64 block;
|
|
u32 n_block;
|
|
|
|
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
tf->protocol = ATA_PROT_NODATA;
|
|
|
|
if (cdb[0] == VERIFY) {
|
|
if (scmd->cmd_len < 10)
|
|
goto invalid_fld;
|
|
scsi_10_lba_len(cdb, &block, &n_block);
|
|
} else if (cdb[0] == VERIFY_16) {
|
|
if (scmd->cmd_len < 16)
|
|
goto invalid_fld;
|
|
scsi_16_lba_len(cdb, &block, &n_block);
|
|
} else
|
|
goto invalid_fld;
|
|
|
|
if (!n_block)
|
|
goto nothing_to_do;
|
|
if (block >= dev_sectors)
|
|
goto out_of_range;
|
|
if ((block + n_block) > dev_sectors)
|
|
goto out_of_range;
|
|
|
|
if (dev->flags & ATA_DFLAG_LBA) {
|
|
tf->flags |= ATA_TFLAG_LBA;
|
|
|
|
if (lba_28_ok(block, n_block)) {
|
|
/* use LBA28 */
|
|
tf->command = ATA_CMD_VERIFY;
|
|
tf->device |= (block >> 24) & 0xf;
|
|
} else if (lba_48_ok(block, n_block)) {
|
|
if (!(dev->flags & ATA_DFLAG_LBA48))
|
|
goto out_of_range;
|
|
|
|
/* use LBA48 */
|
|
tf->flags |= ATA_TFLAG_LBA48;
|
|
tf->command = ATA_CMD_VERIFY_EXT;
|
|
|
|
tf->hob_nsect = (n_block >> 8) & 0xff;
|
|
|
|
tf->hob_lbah = (block >> 40) & 0xff;
|
|
tf->hob_lbam = (block >> 32) & 0xff;
|
|
tf->hob_lbal = (block >> 24) & 0xff;
|
|
} else
|
|
/* request too large even for LBA48 */
|
|
goto out_of_range;
|
|
|
|
tf->nsect = n_block & 0xff;
|
|
|
|
tf->lbah = (block >> 16) & 0xff;
|
|
tf->lbam = (block >> 8) & 0xff;
|
|
tf->lbal = block & 0xff;
|
|
|
|
tf->device |= ATA_LBA;
|
|
} else {
|
|
/* CHS */
|
|
u32 sect, head, cyl, track;
|
|
|
|
if (!lba_28_ok(block, n_block))
|
|
goto out_of_range;
|
|
|
|
/* Convert LBA to CHS */
|
|
track = (u32)block / dev->sectors;
|
|
cyl = track / dev->heads;
|
|
head = track % dev->heads;
|
|
sect = (u32)block % dev->sectors + 1;
|
|
|
|
DPRINTK("block %u track %u cyl %u head %u sect %u\n",
|
|
(u32)block, track, cyl, head, sect);
|
|
|
|
/* Check whether the converted CHS can fit.
|
|
Cylinder: 0-65535
|
|
Head: 0-15
|
|
Sector: 1-255*/
|
|
if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
|
|
goto out_of_range;
|
|
|
|
tf->command = ATA_CMD_VERIFY;
|
|
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
|
|
tf->lbal = sect;
|
|
tf->lbam = cyl;
|
|
tf->lbah = cyl >> 8;
|
|
tf->device |= head;
|
|
}
|
|
|
|
return 0;
|
|
|
|
invalid_fld:
|
|
ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
|
|
/* "Invalid field in cbd" */
|
|
return 1;
|
|
|
|
out_of_range:
|
|
ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
|
|
/* "Logical Block Address out of range" */
|
|
return 1;
|
|
|
|
nothing_to_do:
|
|
scmd->result = SAM_STAT_GOOD;
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
|
|
* @qc: Storage for translated ATA taskfile
|
|
*
|
|
* Converts any of six SCSI read/write commands into the
|
|
* ATA counterpart, including starting sector (LBA),
|
|
* sector count, and taking into account the device's LBA48
|
|
* support.
|
|
*
|
|
* Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and
|
|
* %WRITE_16 are currently supported.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, non-zero on error.
|
|
*/
|
|
static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scsi_cmnd *scmd = qc->scsicmd;
|
|
const u8 *cdb = scmd->cmnd;
|
|
unsigned int tf_flags = 0;
|
|
u64 block;
|
|
u32 n_block;
|
|
int rc;
|
|
|
|
if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16)
|
|
tf_flags |= ATA_TFLAG_WRITE;
|
|
|
|
/* Calculate the SCSI LBA, transfer length and FUA. */
|
|
switch (cdb[0]) {
|
|
case READ_10:
|
|
case WRITE_10:
|
|
if (unlikely(scmd->cmd_len < 10))
|
|
goto invalid_fld;
|
|
scsi_10_lba_len(cdb, &block, &n_block);
|
|
if (unlikely(cdb[1] & (1 << 3)))
|
|
tf_flags |= ATA_TFLAG_FUA;
|
|
break;
|
|
case READ_6:
|
|
case WRITE_6:
|
|
if (unlikely(scmd->cmd_len < 6))
|
|
goto invalid_fld;
|
|
scsi_6_lba_len(cdb, &block, &n_block);
|
|
|
|
/* for 6-byte r/w commands, transfer length 0
|
|
* means 256 blocks of data, not 0 block.
|
|
*/
|
|
if (!n_block)
|
|
n_block = 256;
|
|
break;
|
|
case READ_16:
|
|
case WRITE_16:
|
|
if (unlikely(scmd->cmd_len < 16))
|
|
goto invalid_fld;
|
|
scsi_16_lba_len(cdb, &block, &n_block);
|
|
if (unlikely(cdb[1] & (1 << 3)))
|
|
tf_flags |= ATA_TFLAG_FUA;
|
|
break;
|
|
default:
|
|
DPRINTK("no-byte command\n");
|
|
goto invalid_fld;
|
|
}
|
|
|
|
/* Check and compose ATA command */
|
|
if (!n_block)
|
|
/* For 10-byte and 16-byte SCSI R/W commands, transfer
|
|
* length 0 means transfer 0 block of data.
|
|
* However, for ATA R/W commands, sector count 0 means
|
|
* 256 or 65536 sectors, not 0 sectors as in SCSI.
|
|
*
|
|
* WARNING: one or two older ATA drives treat 0 as 0...
|
|
*/
|
|
goto nothing_to_do;
|
|
|
|
qc->flags |= ATA_QCFLAG_IO;
|
|
qc->nbytes = n_block * ATA_SECT_SIZE;
|
|
|
|
rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags,
|
|
qc->tag);
|
|
if (likely(rc == 0))
|
|
return 0;
|
|
|
|
if (rc == -ERANGE)
|
|
goto out_of_range;
|
|
/* treat all other errors as -EINVAL, fall through */
|
|
invalid_fld:
|
|
ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
|
|
/* "Invalid field in cbd" */
|
|
return 1;
|
|
|
|
out_of_range:
|
|
ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
|
|
/* "Logical Block Address out of range" */
|
|
return 1;
|
|
|
|
nothing_to_do:
|
|
scmd->result = SAM_STAT_GOOD;
|
|
return 1;
|
|
}
|
|
|
|
static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct scsi_cmnd *cmd = qc->scsicmd;
|
|
u8 *cdb = cmd->cmnd;
|
|
int need_sense = (qc->err_mask != 0);
|
|
|
|
/* For ATA pass thru (SAT) commands, generate a sense block if
|
|
* user mandated it or if there's an error. Note that if we
|
|
* generate because the user forced us to, a check condition
|
|
* is generated and the ATA register values are returned
|
|
* whether the command completed successfully or not. If there
|
|
* was no error, SK, ASC and ASCQ will all be zero.
|
|
*/
|
|
if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
|
|
((cdb[2] & 0x20) || need_sense)) {
|
|
ata_gen_passthru_sense(qc);
|
|
} else {
|
|
if (!need_sense) {
|
|
cmd->result = SAM_STAT_GOOD;
|
|
} else {
|
|
/* TODO: decide which descriptor format to use
|
|
* for 48b LBA devices and call that here
|
|
* instead of the fixed desc, which is only
|
|
* good for smaller LBA (and maybe CHS?)
|
|
* devices.
|
|
*/
|
|
ata_gen_ata_sense(qc);
|
|
}
|
|
}
|
|
|
|
/* XXX: track spindown state for spindown skipping and warning */
|
|
if (unlikely(qc->tf.command == ATA_CMD_STANDBY ||
|
|
qc->tf.command == ATA_CMD_STANDBYNOW1))
|
|
qc->dev->flags |= ATA_DFLAG_SPUNDOWN;
|
|
else if (likely(system_state != SYSTEM_HALT &&
|
|
system_state != SYSTEM_POWER_OFF))
|
|
qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN;
|
|
|
|
if (need_sense && !ap->ops->error_handler)
|
|
ata_dump_status(ap->print_id, &qc->result_tf);
|
|
|
|
qc->scsidone(cmd);
|
|
|
|
ata_qc_free(qc);
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_translate - Translate then issue SCSI command to ATA device
|
|
* @dev: ATA device to which the command is addressed
|
|
* @cmd: SCSI command to execute
|
|
* @done: SCSI command completion function
|
|
* @xlat_func: Actor which translates @cmd to an ATA taskfile
|
|
*
|
|
* Our ->queuecommand() function has decided that the SCSI
|
|
* command issued can be directly translated into an ATA
|
|
* command, rather than handled internally.
|
|
*
|
|
* This function sets up an ata_queued_cmd structure for the
|
|
* SCSI command, and sends that ata_queued_cmd to the hardware.
|
|
*
|
|
* The xlat_func argument (actor) returns 0 if ready to execute
|
|
* ATA command, else 1 to finish translation. If 1 is returned
|
|
* then cmd->result (and possibly cmd->sense_buffer) are assumed
|
|
* to be set reflecting an error condition or clean (early)
|
|
* termination.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command
|
|
* needs to be deferred.
|
|
*/
|
|
static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
|
|
void (*done)(struct scsi_cmnd *),
|
|
ata_xlat_func_t xlat_func)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
struct ata_queued_cmd *qc;
|
|
int rc;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
qc = ata_scsi_qc_new(dev, cmd, done);
|
|
if (!qc)
|
|
goto err_mem;
|
|
|
|
/* data is present; dma-map it */
|
|
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
|
|
cmd->sc_data_direction == DMA_TO_DEVICE) {
|
|
if (unlikely(scsi_bufflen(cmd) < 1)) {
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
"WARNING: zero len r/w req\n");
|
|
goto err_did;
|
|
}
|
|
|
|
ata_sg_init(qc, scsi_sglist(cmd), scsi_sg_count(cmd));
|
|
|
|
qc->dma_dir = cmd->sc_data_direction;
|
|
}
|
|
|
|
qc->complete_fn = ata_scsi_qc_complete;
|
|
|
|
if (xlat_func(qc))
|
|
goto early_finish;
|
|
|
|
if (ap->ops->qc_defer) {
|
|
if ((rc = ap->ops->qc_defer(qc)))
|
|
goto defer;
|
|
}
|
|
|
|
/* select device, send command to hardware */
|
|
ata_qc_issue(qc);
|
|
|
|
VPRINTK("EXIT\n");
|
|
return 0;
|
|
|
|
early_finish:
|
|
ata_qc_free(qc);
|
|
qc->scsidone(cmd);
|
|
DPRINTK("EXIT - early finish (good or error)\n");
|
|
return 0;
|
|
|
|
err_did:
|
|
ata_qc_free(qc);
|
|
cmd->result = (DID_ERROR << 16);
|
|
qc->scsidone(cmd);
|
|
err_mem:
|
|
DPRINTK("EXIT - internal\n");
|
|
return 0;
|
|
|
|
defer:
|
|
ata_qc_free(qc);
|
|
DPRINTK("EXIT - defer\n");
|
|
if (rc == ATA_DEFER_LINK)
|
|
return SCSI_MLQUEUE_DEVICE_BUSY;
|
|
else
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_rbuf_get - Map response buffer.
|
|
* @cmd: SCSI command containing buffer to be mapped.
|
|
* @flags: unsigned long variable to store irq enable status
|
|
* @copy_in: copy in from user buffer
|
|
*
|
|
* Prepare buffer for simulated SCSI commands.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(ata_scsi_rbuf_lock) on success
|
|
*
|
|
* RETURNS:
|
|
* Pointer to response buffer.
|
|
*/
|
|
static void *ata_scsi_rbuf_get(struct scsi_cmnd *cmd, bool copy_in,
|
|
unsigned long *flags)
|
|
{
|
|
spin_lock_irqsave(&ata_scsi_rbuf_lock, *flags);
|
|
|
|
memset(ata_scsi_rbuf, 0, ATA_SCSI_RBUF_SIZE);
|
|
if (copy_in)
|
|
sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
|
|
ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE);
|
|
return ata_scsi_rbuf;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_rbuf_put - Unmap response buffer.
|
|
* @cmd: SCSI command containing buffer to be unmapped.
|
|
* @copy_out: copy out result
|
|
* @flags: @flags passed to ata_scsi_rbuf_get()
|
|
*
|
|
* Returns rbuf buffer. The result is copied to @cmd's buffer if
|
|
* @copy_back is true.
|
|
*
|
|
* LOCKING:
|
|
* Unlocks ata_scsi_rbuf_lock.
|
|
*/
|
|
static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, bool copy_out,
|
|
unsigned long *flags)
|
|
{
|
|
if (copy_out)
|
|
sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
|
|
ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE);
|
|
spin_unlock_irqrestore(&ata_scsi_rbuf_lock, *flags);
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_rbuf_fill - wrapper for SCSI command simulators
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @actor: Callback hook for desired SCSI command simulator
|
|
*
|
|
* Takes care of the hard work of simulating a SCSI command...
|
|
* Mapping the response buffer, calling the command's handler,
|
|
* and handling the handler's return value. This return value
|
|
* indicates whether the handler wishes the SCSI command to be
|
|
* completed successfully (0), or not (in which case cmd->result
|
|
* and sense buffer are assumed to be set).
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
|
|
unsigned int (*actor)(struct ata_scsi_args *args, u8 *rbuf))
|
|
{
|
|
u8 *rbuf;
|
|
unsigned int rc;
|
|
struct scsi_cmnd *cmd = args->cmd;
|
|
unsigned long flags;
|
|
|
|
rbuf = ata_scsi_rbuf_get(cmd, false, &flags);
|
|
rc = actor(args, rbuf);
|
|
ata_scsi_rbuf_put(cmd, rc == 0, &flags);
|
|
|
|
if (rc == 0)
|
|
cmd->result = SAM_STAT_GOOD;
|
|
args->done(cmd);
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_inq_std - Simulate INQUIRY command
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Returns standard device identification data associated
|
|
* with non-VPD INQUIRY command output.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
const u8 versions[] = {
|
|
0x60, /* SAM-3 (no version claimed) */
|
|
|
|
0x03,
|
|
0x20, /* SBC-2 (no version claimed) */
|
|
|
|
0x02,
|
|
0x60 /* SPC-3 (no version claimed) */
|
|
};
|
|
u8 hdr[] = {
|
|
TYPE_DISK,
|
|
0,
|
|
0x5, /* claim SPC-3 version compatibility */
|
|
2,
|
|
95 - 4
|
|
};
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/* set scsi removeable (RMB) bit per ata bit */
|
|
if (ata_id_removeable(args->id))
|
|
hdr[1] |= (1 << 7);
|
|
|
|
memcpy(rbuf, hdr, sizeof(hdr));
|
|
memcpy(&rbuf[8], "ATA ", 8);
|
|
ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
|
|
ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
|
|
|
|
if (rbuf[32] == 0 || rbuf[32] == ' ')
|
|
memcpy(&rbuf[32], "n/a ", 4);
|
|
|
|
memcpy(rbuf + 59, versions, sizeof(versions));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Returns list of inquiry VPD pages available.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
const u8 pages[] = {
|
|
0x00, /* page 0x00, this page */
|
|
0x80, /* page 0x80, unit serial no page */
|
|
0x83, /* page 0x83, device ident page */
|
|
0x89, /* page 0x89, ata info page */
|
|
0xb1, /* page 0xb1, block device characteristics page */
|
|
};
|
|
|
|
rbuf[3] = sizeof(pages); /* number of supported VPD pages */
|
|
memcpy(rbuf + 4, pages, sizeof(pages));
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Returns ATA device serial number.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
const u8 hdr[] = {
|
|
0,
|
|
0x80, /* this page code */
|
|
0,
|
|
ATA_ID_SERNO_LEN, /* page len */
|
|
};
|
|
|
|
memcpy(rbuf, hdr, sizeof(hdr));
|
|
ata_id_string(args->id, (unsigned char *) &rbuf[4],
|
|
ATA_ID_SERNO, ATA_ID_SERNO_LEN);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Yields two logical unit device identification designators:
|
|
* - vendor specific ASCII containing the ATA serial number
|
|
* - SAT defined "t10 vendor id based" containing ASCII vendor
|
|
* name ("ATA "), model and serial numbers.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
const int sat_model_serial_desc_len = 68;
|
|
int num;
|
|
|
|
rbuf[1] = 0x83; /* this page code */
|
|
num = 4;
|
|
|
|
/* piv=0, assoc=lu, code_set=ACSII, designator=vendor */
|
|
rbuf[num + 0] = 2;
|
|
rbuf[num + 3] = ATA_ID_SERNO_LEN;
|
|
num += 4;
|
|
ata_id_string(args->id, (unsigned char *) rbuf + num,
|
|
ATA_ID_SERNO, ATA_ID_SERNO_LEN);
|
|
num += ATA_ID_SERNO_LEN;
|
|
|
|
/* SAT defined lu model and serial numbers descriptor */
|
|
/* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */
|
|
rbuf[num + 0] = 2;
|
|
rbuf[num + 1] = 1;
|
|
rbuf[num + 3] = sat_model_serial_desc_len;
|
|
num += 4;
|
|
memcpy(rbuf + num, "ATA ", 8);
|
|
num += 8;
|
|
ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_PROD,
|
|
ATA_ID_PROD_LEN);
|
|
num += ATA_ID_PROD_LEN;
|
|
ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_SERNO,
|
|
ATA_ID_SERNO_LEN);
|
|
num += ATA_ID_SERNO_LEN;
|
|
|
|
rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Yields SAT-specified ATA VPD page.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
struct ata_taskfile tf;
|
|
|
|
memset(&tf, 0, sizeof(tf));
|
|
|
|
rbuf[1] = 0x89; /* our page code */
|
|
rbuf[2] = (0x238 >> 8); /* page size fixed at 238h */
|
|
rbuf[3] = (0x238 & 0xff);
|
|
|
|
memcpy(&rbuf[8], "linux ", 8);
|
|
memcpy(&rbuf[16], "libata ", 16);
|
|
memcpy(&rbuf[32], DRV_VERSION, 4);
|
|
ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
|
|
|
|
/* we don't store the ATA device signature, so we fake it */
|
|
|
|
tf.command = ATA_DRDY; /* really, this is Status reg */
|
|
tf.lbal = 0x1;
|
|
tf.nsect = 0x1;
|
|
|
|
ata_tf_to_fis(&tf, 0, 1, &rbuf[36]); /* TODO: PMP? */
|
|
rbuf[36] = 0x34; /* force D2H Reg FIS (34h) */
|
|
|
|
rbuf[56] = ATA_CMD_ID_ATA;
|
|
|
|
memcpy(&rbuf[60], &args->id[0], 512);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
rbuf[1] = 0xb1;
|
|
rbuf[3] = 0x3c;
|
|
if (ata_id_major_version(args->id) > 7) {
|
|
rbuf[4] = args->id[217] >> 8;
|
|
rbuf[5] = args->id[217];
|
|
rbuf[7] = args->id[168] & 0xf;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_noop - Command handler that simply returns success.
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* No operation. Simply returns success to caller, to indicate
|
|
* that the caller should successfully complete this SCSI command.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
VPRINTK("ENTER\n");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_msense_caching - Simulate MODE SENSE caching info page
|
|
* @id: device IDENTIFY data
|
|
* @buf: output buffer
|
|
*
|
|
* Generate a caching info page, which conditionally indicates
|
|
* write caching to the SCSI layer, depending on device
|
|
* capabilities.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static unsigned int ata_msense_caching(u16 *id, u8 *buf)
|
|
{
|
|
memcpy(buf, def_cache_mpage, sizeof(def_cache_mpage));
|
|
if (ata_id_wcache_enabled(id))
|
|
buf[2] |= (1 << 2); /* write cache enable */
|
|
if (!ata_id_rahead_enabled(id))
|
|
buf[12] |= (1 << 5); /* disable read ahead */
|
|
return sizeof(def_cache_mpage);
|
|
}
|
|
|
|
/**
|
|
* ata_msense_ctl_mode - Simulate MODE SENSE control mode page
|
|
* @buf: output buffer
|
|
*
|
|
* Generate a generic MODE SENSE control mode page.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static unsigned int ata_msense_ctl_mode(u8 *buf)
|
|
{
|
|
memcpy(buf, def_control_mpage, sizeof(def_control_mpage));
|
|
return sizeof(def_control_mpage);
|
|
}
|
|
|
|
/**
|
|
* ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
|
|
* @buf: output buffer
|
|
*
|
|
* Generate a generic MODE SENSE r/w error recovery page.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static unsigned int ata_msense_rw_recovery(u8 *buf)
|
|
{
|
|
memcpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage));
|
|
return sizeof(def_rw_recovery_mpage);
|
|
}
|
|
|
|
/*
|
|
* We can turn this into a real blacklist if it's needed, for now just
|
|
* blacklist any Maxtor BANC1G10 revision firmware
|
|
*/
|
|
static int ata_dev_supports_fua(u16 *id)
|
|
{
|
|
unsigned char model[ATA_ID_PROD_LEN + 1], fw[ATA_ID_FW_REV_LEN + 1];
|
|
|
|
if (!libata_fua)
|
|
return 0;
|
|
if (!ata_id_has_fua(id))
|
|
return 0;
|
|
|
|
ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model));
|
|
ata_id_c_string(id, fw, ATA_ID_FW_REV, sizeof(fw));
|
|
|
|
if (strcmp(model, "Maxtor"))
|
|
return 1;
|
|
if (strcmp(fw, "BANC1G10"))
|
|
return 1;
|
|
|
|
return 0; /* blacklisted */
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Simulate MODE SENSE commands. Assume this is invoked for direct
|
|
* access devices (e.g. disks) only. There should be no block
|
|
* descriptor for other device types.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
struct ata_device *dev = args->dev;
|
|
u8 *scsicmd = args->cmd->cmnd, *p = rbuf;
|
|
const u8 sat_blk_desc[] = {
|
|
0, 0, 0, 0, /* number of blocks: sat unspecified */
|
|
0,
|
|
0, 0x2, 0x0 /* block length: 512 bytes */
|
|
};
|
|
u8 pg, spg;
|
|
unsigned int ebd, page_control, six_byte;
|
|
u8 dpofua;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
six_byte = (scsicmd[0] == MODE_SENSE);
|
|
ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
|
|
/*
|
|
* LLBA bit in msense(10) ignored (compliant)
|
|
*/
|
|
|
|
page_control = scsicmd[2] >> 6;
|
|
switch (page_control) {
|
|
case 0: /* current */
|
|
break; /* supported */
|
|
case 3: /* saved */
|
|
goto saving_not_supp;
|
|
case 1: /* changeable */
|
|
case 2: /* defaults */
|
|
default:
|
|
goto invalid_fld;
|
|
}
|
|
|
|
if (six_byte)
|
|
p += 4 + (ebd ? 8 : 0);
|
|
else
|
|
p += 8 + (ebd ? 8 : 0);
|
|
|
|
pg = scsicmd[2] & 0x3f;
|
|
spg = scsicmd[3];
|
|
/*
|
|
* No mode subpages supported (yet) but asking for _all_
|
|
* subpages may be valid
|
|
*/
|
|
if (spg && (spg != ALL_SUB_MPAGES))
|
|
goto invalid_fld;
|
|
|
|
switch(pg) {
|
|
case RW_RECOVERY_MPAGE:
|
|
p += ata_msense_rw_recovery(p);
|
|
break;
|
|
|
|
case CACHE_MPAGE:
|
|
p += ata_msense_caching(args->id, p);
|
|
break;
|
|
|
|
case CONTROL_MPAGE:
|
|
p += ata_msense_ctl_mode(p);
|
|
break;
|
|
|
|
case ALL_MPAGES:
|
|
p += ata_msense_rw_recovery(p);
|
|
p += ata_msense_caching(args->id, p);
|
|
p += ata_msense_ctl_mode(p);
|
|
break;
|
|
|
|
default: /* invalid page code */
|
|
goto invalid_fld;
|
|
}
|
|
|
|
dpofua = 0;
|
|
if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) &&
|
|
(!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
|
|
dpofua = 1 << 4;
|
|
|
|
if (six_byte) {
|
|
rbuf[0] = p - rbuf - 1;
|
|
rbuf[2] |= dpofua;
|
|
if (ebd) {
|
|
rbuf[3] = sizeof(sat_blk_desc);
|
|
memcpy(rbuf + 4, sat_blk_desc, sizeof(sat_blk_desc));
|
|
}
|
|
} else {
|
|
unsigned int output_len = p - rbuf - 2;
|
|
|
|
rbuf[0] = output_len >> 8;
|
|
rbuf[1] = output_len;
|
|
rbuf[3] |= dpofua;
|
|
if (ebd) {
|
|
rbuf[7] = sizeof(sat_blk_desc);
|
|
memcpy(rbuf + 8, sat_blk_desc, sizeof(sat_blk_desc));
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
invalid_fld:
|
|
ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
|
|
/* "Invalid field in cbd" */
|
|
return 1;
|
|
|
|
saving_not_supp:
|
|
ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
|
|
/* "Saving parameters not supported" */
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Simulate READ CAPACITY commands.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if (args->cmd->cmnd[0] == READ_CAPACITY) {
|
|
if (last_lba >= 0xffffffffULL)
|
|
last_lba = 0xffffffff;
|
|
|
|
/* sector count, 32-bit */
|
|
rbuf[0] = last_lba >> (8 * 3);
|
|
rbuf[1] = last_lba >> (8 * 2);
|
|
rbuf[2] = last_lba >> (8 * 1);
|
|
rbuf[3] = last_lba;
|
|
|
|
/* sector size */
|
|
rbuf[6] = ATA_SECT_SIZE >> 8;
|
|
rbuf[7] = ATA_SECT_SIZE & 0xff;
|
|
} else {
|
|
/* sector count, 64-bit */
|
|
rbuf[0] = last_lba >> (8 * 7);
|
|
rbuf[1] = last_lba >> (8 * 6);
|
|
rbuf[2] = last_lba >> (8 * 5);
|
|
rbuf[3] = last_lba >> (8 * 4);
|
|
rbuf[4] = last_lba >> (8 * 3);
|
|
rbuf[5] = last_lba >> (8 * 2);
|
|
rbuf[6] = last_lba >> (8 * 1);
|
|
rbuf[7] = last_lba;
|
|
|
|
/* sector size */
|
|
rbuf[10] = ATA_SECT_SIZE >> 8;
|
|
rbuf[11] = ATA_SECT_SIZE & 0xff;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsiop_report_luns - Simulate REPORT LUNS command
|
|
* @args: device IDENTIFY data / SCSI command of interest.
|
|
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
|
|
*
|
|
* Simulate REPORT LUNS command.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf)
|
|
{
|
|
VPRINTK("ENTER\n");
|
|
rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atapi_sense_complete(struct ata_queued_cmd *qc)
|
|
{
|
|
if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) {
|
|
/* FIXME: not quite right; we don't want the
|
|
* translation of taskfile registers into
|
|
* a sense descriptors, since that's only
|
|
* correct for ATA, not ATAPI
|
|
*/
|
|
ata_gen_passthru_sense(qc);
|
|
}
|
|
|
|
qc->scsidone(qc->scsicmd);
|
|
ata_qc_free(qc);
|
|
}
|
|
|
|
/* is it pointless to prefer PIO for "safety reasons"? */
|
|
static inline int ata_pio_use_silly(struct ata_port *ap)
|
|
{
|
|
return (ap->flags & ATA_FLAG_PIO_DMA);
|
|
}
|
|
|
|
static void atapi_request_sense(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct scsi_cmnd *cmd = qc->scsicmd;
|
|
|
|
DPRINTK("ATAPI request sense\n");
|
|
|
|
/* FIXME: is this needed? */
|
|
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
|
|
|
|
#ifdef CONFIG_ATA_SFF
|
|
if (ap->ops->sff_tf_read)
|
|
ap->ops->sff_tf_read(ap, &qc->tf);
|
|
#endif
|
|
|
|
/* fill these in, for the case where they are -not- overwritten */
|
|
cmd->sense_buffer[0] = 0x70;
|
|
cmd->sense_buffer[2] = qc->tf.feature >> 4;
|
|
|
|
ata_qc_reinit(qc);
|
|
|
|
/* setup sg table and init transfer direction */
|
|
sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
|
|
ata_sg_init(qc, &qc->sgent, 1);
|
|
qc->dma_dir = DMA_FROM_DEVICE;
|
|
|
|
memset(&qc->cdb, 0, qc->dev->cdb_len);
|
|
qc->cdb[0] = REQUEST_SENSE;
|
|
qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
|
|
|
|
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
qc->tf.command = ATA_CMD_PACKET;
|
|
|
|
if (ata_pio_use_silly(ap)) {
|
|
qc->tf.protocol = ATAPI_PROT_DMA;
|
|
qc->tf.feature |= ATAPI_PKT_DMA;
|
|
} else {
|
|
qc->tf.protocol = ATAPI_PROT_PIO;
|
|
qc->tf.lbam = SCSI_SENSE_BUFFERSIZE;
|
|
qc->tf.lbah = 0;
|
|
}
|
|
qc->nbytes = SCSI_SENSE_BUFFERSIZE;
|
|
|
|
qc->complete_fn = atapi_sense_complete;
|
|
|
|
ata_qc_issue(qc);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
static void atapi_qc_complete(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scsi_cmnd *cmd = qc->scsicmd;
|
|
unsigned int err_mask = qc->err_mask;
|
|
|
|
VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
|
|
|
|
/* handle completion from new EH */
|
|
if (unlikely(qc->ap->ops->error_handler &&
|
|
(err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) {
|
|
|
|
if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
|
|
/* FIXME: not quite right; we don't want the
|
|
* translation of taskfile registers into a
|
|
* sense descriptors, since that's only
|
|
* correct for ATA, not ATAPI
|
|
*/
|
|
ata_gen_passthru_sense(qc);
|
|
}
|
|
|
|
/* SCSI EH automatically locks door if sdev->locked is
|
|
* set. Sometimes door lock request continues to
|
|
* fail, for example, when no media is present. This
|
|
* creates a loop - SCSI EH issues door lock which
|
|
* fails and gets invoked again to acquire sense data
|
|
* for the failed command.
|
|
*
|
|
* If door lock fails, always clear sdev->locked to
|
|
* avoid this infinite loop.
|
|
*/
|
|
if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
|
|
qc->dev->sdev->locked = 0;
|
|
|
|
qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
|
|
qc->scsidone(cmd);
|
|
ata_qc_free(qc);
|
|
return;
|
|
}
|
|
|
|
/* successful completion or old EH failure path */
|
|
if (unlikely(err_mask & AC_ERR_DEV)) {
|
|
cmd->result = SAM_STAT_CHECK_CONDITION;
|
|
atapi_request_sense(qc);
|
|
return;
|
|
} else if (unlikely(err_mask)) {
|
|
/* FIXME: not quite right; we don't want the
|
|
* translation of taskfile registers into
|
|
* a sense descriptors, since that's only
|
|
* correct for ATA, not ATAPI
|
|
*/
|
|
ata_gen_passthru_sense(qc);
|
|
} else {
|
|
u8 *scsicmd = cmd->cmnd;
|
|
|
|
if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
|
|
unsigned long flags;
|
|
u8 *buf;
|
|
|
|
buf = ata_scsi_rbuf_get(cmd, true, &flags);
|
|
|
|
/* ATAPI devices typically report zero for their SCSI version,
|
|
* and sometimes deviate from the spec WRT response data
|
|
* format. If SCSI version is reported as zero like normal,
|
|
* then we make the following fixups: 1) Fake MMC-5 version,
|
|
* to indicate to the Linux scsi midlayer this is a modern
|
|
* device. 2) Ensure response data format / ATAPI information
|
|
* are always correct.
|
|
*/
|
|
if (buf[2] == 0) {
|
|
buf[2] = 0x5;
|
|
buf[3] = 0x32;
|
|
}
|
|
|
|
ata_scsi_rbuf_put(cmd, true, &flags);
|
|
}
|
|
|
|
cmd->result = SAM_STAT_GOOD;
|
|
}
|
|
|
|
qc->scsidone(cmd);
|
|
ata_qc_free(qc);
|
|
}
|
|
/**
|
|
* atapi_xlat - Initialize PACKET taskfile
|
|
* @qc: command structure to be initialized
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, non-zero on failure.
|
|
*/
|
|
static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scsi_cmnd *scmd = qc->scsicmd;
|
|
struct ata_device *dev = qc->dev;
|
|
int nodata = (scmd->sc_data_direction == DMA_NONE);
|
|
int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
|
|
unsigned int nbytes;
|
|
|
|
memset(qc->cdb, 0, dev->cdb_len);
|
|
memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len);
|
|
|
|
qc->complete_fn = atapi_qc_complete;
|
|
|
|
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
if (scmd->sc_data_direction == DMA_TO_DEVICE) {
|
|
qc->tf.flags |= ATA_TFLAG_WRITE;
|
|
DPRINTK("direction: write\n");
|
|
}
|
|
|
|
qc->tf.command = ATA_CMD_PACKET;
|
|
ata_qc_set_pc_nbytes(qc);
|
|
|
|
/* check whether ATAPI DMA is safe */
|
|
if (!nodata && !using_pio && atapi_check_dma(qc))
|
|
using_pio = 1;
|
|
|
|
/* Some controller variants snoop this value for Packet
|
|
* transfers to do state machine and FIFO management. Thus we
|
|
* want to set it properly, and for DMA where it is
|
|
* effectively meaningless.
|
|
*/
|
|
nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024);
|
|
|
|
/* Most ATAPI devices which honor transfer chunk size don't
|
|
* behave according to the spec when odd chunk size which
|
|
* matches the transfer length is specified. If the number of
|
|
* bytes to transfer is 2n+1. According to the spec, what
|
|
* should happen is to indicate that 2n+1 is going to be
|
|
* transferred and transfer 2n+2 bytes where the last byte is
|
|
* padding.
|
|
*
|
|
* In practice, this doesn't happen. ATAPI devices first
|
|
* indicate and transfer 2n bytes and then indicate and
|
|
* transfer 2 bytes where the last byte is padding.
|
|
*
|
|
* This inconsistency confuses several controllers which
|
|
* perform PIO using DMA such as Intel AHCIs and sil3124/32.
|
|
* These controllers use actual number of transferred bytes to
|
|
* update DMA poitner and transfer of 4n+2 bytes make those
|
|
* controller push DMA pointer by 4n+4 bytes because SATA data
|
|
* FISes are aligned to 4 bytes. This causes data corruption
|
|
* and buffer overrun.
|
|
*
|
|
* Always setting nbytes to even number solves this problem
|
|
* because then ATAPI devices don't have to split data at 2n
|
|
* boundaries.
|
|
*/
|
|
if (nbytes & 0x1)
|
|
nbytes++;
|
|
|
|
qc->tf.lbam = (nbytes & 0xFF);
|
|
qc->tf.lbah = (nbytes >> 8);
|
|
|
|
if (nodata)
|
|
qc->tf.protocol = ATAPI_PROT_NODATA;
|
|
else if (using_pio)
|
|
qc->tf.protocol = ATAPI_PROT_PIO;
|
|
else {
|
|
/* DMA data xfer */
|
|
qc->tf.protocol = ATAPI_PROT_DMA;
|
|
qc->tf.feature |= ATAPI_PKT_DMA;
|
|
|
|
if ((dev->flags & ATA_DFLAG_DMADIR) &&
|
|
(scmd->sc_data_direction != DMA_TO_DEVICE))
|
|
/* some SATA bridges need us to indicate data xfer direction */
|
|
qc->tf.feature |= ATAPI_DMADIR;
|
|
}
|
|
|
|
|
|
/* FIXME: We need to translate 0x05 READ_BLOCK_LIMITS to a MODE_SENSE
|
|
as ATAPI tape drives don't get this right otherwise */
|
|
return 0;
|
|
}
|
|
|
|
static struct ata_device *ata_find_dev(struct ata_port *ap, int devno)
|
|
{
|
|
if (!sata_pmp_attached(ap)) {
|
|
if (likely(devno < ata_link_max_devices(&ap->link)))
|
|
return &ap->link.device[devno];
|
|
} else {
|
|
if (likely(devno < ap->nr_pmp_links))
|
|
return &ap->pmp_link[devno].device[0];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
|
|
const struct scsi_device *scsidev)
|
|
{
|
|
int devno;
|
|
|
|
/* skip commands not addressed to targets we simulate */
|
|
if (!sata_pmp_attached(ap)) {
|
|
if (unlikely(scsidev->channel || scsidev->lun))
|
|
return NULL;
|
|
devno = scsidev->id;
|
|
} else {
|
|
if (unlikely(scsidev->id || scsidev->lun))
|
|
return NULL;
|
|
devno = scsidev->channel;
|
|
}
|
|
|
|
return ata_find_dev(ap, devno);
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_find_dev - lookup ata_device from scsi_cmnd
|
|
* @ap: ATA port to which the device is attached
|
|
* @scsidev: SCSI device from which we derive the ATA device
|
|
*
|
|
* Given various information provided in struct scsi_cmnd,
|
|
* map that onto an ATA bus, and using that mapping
|
|
* determine which ata_device is associated with the
|
|
* SCSI command to be sent.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* Associated ATA device, or %NULL if not found.
|
|
*/
|
|
static struct ata_device *
|
|
ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
|
|
{
|
|
struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
|
|
|
|
if (unlikely(!dev || !ata_dev_enabled(dev)))
|
|
return NULL;
|
|
|
|
return dev;
|
|
}
|
|
|
|
/*
|
|
* ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
|
|
* @byte1: Byte 1 from pass-thru CDB.
|
|
*
|
|
* RETURNS:
|
|
* ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
|
|
*/
|
|
static u8
|
|
ata_scsi_map_proto(u8 byte1)
|
|
{
|
|
switch((byte1 & 0x1e) >> 1) {
|
|
case 3: /* Non-data */
|
|
return ATA_PROT_NODATA;
|
|
|
|
case 6: /* DMA */
|
|
case 10: /* UDMA Data-in */
|
|
case 11: /* UDMA Data-Out */
|
|
return ATA_PROT_DMA;
|
|
|
|
case 4: /* PIO Data-in */
|
|
case 5: /* PIO Data-out */
|
|
return ATA_PROT_PIO;
|
|
|
|
case 0: /* Hard Reset */
|
|
case 1: /* SRST */
|
|
case 8: /* Device Diagnostic */
|
|
case 9: /* Device Reset */
|
|
case 7: /* DMA Queued */
|
|
case 12: /* FPDMA */
|
|
case 15: /* Return Response Info */
|
|
default: /* Reserved */
|
|
break;
|
|
}
|
|
|
|
return ATA_PROT_UNKNOWN;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
|
|
* @qc: command structure to be initialized
|
|
*
|
|
* Handles either 12 or 16-byte versions of the CDB.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, non-zero on failure.
|
|
*/
|
|
static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_taskfile *tf = &(qc->tf);
|
|
struct scsi_cmnd *scmd = qc->scsicmd;
|
|
struct ata_device *dev = qc->dev;
|
|
const u8 *cdb = scmd->cmnd;
|
|
|
|
if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN)
|
|
goto invalid_fld;
|
|
|
|
/*
|
|
* Filter TPM commands by default. These provide an
|
|
* essentially uncontrolled encrypted "back door" between
|
|
* applications and the disk. Set libata.allow_tpm=1 if you
|
|
* have a real reason for wanting to use them. This ensures
|
|
* that installed software cannot easily mess stuff up without
|
|
* user intent. DVR type users will probably ship with this enabled
|
|
* for movie content management.
|
|
*
|
|
* Note that for ATA8 we can issue a DCS change and DCS freeze lock
|
|
* for this and should do in future but that it is not sufficient as
|
|
* DCS is an optional feature set. Thus we also do the software filter
|
|
* so that we comply with the TC consortium stated goal that the user
|
|
* can turn off TC features of their system.
|
|
*/
|
|
if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
|
|
goto invalid_fld;
|
|
|
|
/* We may not issue DMA commands if no DMA mode is set */
|
|
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
|
|
goto invalid_fld;
|
|
|
|
/*
|
|
* 12 and 16 byte CDBs use different offsets to
|
|
* provide the various register values.
|
|
*/
|
|
if (cdb[0] == ATA_16) {
|
|
/*
|
|
* 16-byte CDB - may contain extended commands.
|
|
*
|
|
* If that is the case, copy the upper byte register values.
|
|
*/
|
|
if (cdb[1] & 0x01) {
|
|
tf->hob_feature = cdb[3];
|
|
tf->hob_nsect = cdb[5];
|
|
tf->hob_lbal = cdb[7];
|
|
tf->hob_lbam = cdb[9];
|
|
tf->hob_lbah = cdb[11];
|
|
tf->flags |= ATA_TFLAG_LBA48;
|
|
} else
|
|
tf->flags &= ~ATA_TFLAG_LBA48;
|
|
|
|
/*
|
|
* Always copy low byte, device and command registers.
|
|
*/
|
|
tf->feature = cdb[4];
|
|
tf->nsect = cdb[6];
|
|
tf->lbal = cdb[8];
|
|
tf->lbam = cdb[10];
|
|
tf->lbah = cdb[12];
|
|
tf->device = cdb[13];
|
|
tf->command = cdb[14];
|
|
} else {
|
|
/*
|
|
* 12-byte CDB - incapable of extended commands.
|
|
*/
|
|
tf->flags &= ~ATA_TFLAG_LBA48;
|
|
|
|
tf->feature = cdb[3];
|
|
tf->nsect = cdb[4];
|
|
tf->lbal = cdb[5];
|
|
tf->lbam = cdb[6];
|
|
tf->lbah = cdb[7];
|
|
tf->device = cdb[8];
|
|
tf->command = cdb[9];
|
|
}
|
|
|
|
/* enforce correct master/slave bit */
|
|
tf->device = dev->devno ?
|
|
tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
|
|
|
|
/* sanity check for pio multi commands */
|
|
if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf))
|
|
goto invalid_fld;
|
|
|
|
if (is_multi_taskfile(tf)) {
|
|
unsigned int multi_count = 1 << (cdb[1] >> 5);
|
|
|
|
/* compare the passed through multi_count
|
|
* with the cached multi_count of libata
|
|
*/
|
|
if (multi_count != dev->multi_count)
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
"invalid multi_count %u ignored\n",
|
|
multi_count);
|
|
}
|
|
|
|
/* READ/WRITE LONG use a non-standard sect_size */
|
|
qc->sect_size = ATA_SECT_SIZE;
|
|
switch (tf->command) {
|
|
case ATA_CMD_READ_LONG:
|
|
case ATA_CMD_READ_LONG_ONCE:
|
|
case ATA_CMD_WRITE_LONG:
|
|
case ATA_CMD_WRITE_LONG_ONCE:
|
|
if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
|
|
goto invalid_fld;
|
|
qc->sect_size = scsi_bufflen(scmd);
|
|
}
|
|
|
|
/*
|
|
* Filter SET_FEATURES - XFER MODE command -- otherwise,
|
|
* SET_FEATURES - XFER MODE must be preceded/succeeded
|
|
* by an update to hardware-specific registers for each
|
|
* controller (i.e. the reason for ->set_piomode(),
|
|
* ->set_dmamode(), and ->post_set_mode() hooks).
|
|
*/
|
|
if ((tf->command == ATA_CMD_SET_FEATURES)
|
|
&& (tf->feature == SETFEATURES_XFER))
|
|
goto invalid_fld;
|
|
|
|
/*
|
|
* Set flags so that all registers will be written,
|
|
* and pass on write indication (used for PIO/DMA
|
|
* setup.)
|
|
*/
|
|
tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
|
|
|
|
if (scmd->sc_data_direction == DMA_TO_DEVICE)
|
|
tf->flags |= ATA_TFLAG_WRITE;
|
|
|
|
/*
|
|
* Set transfer length.
|
|
*
|
|
* TODO: find out if we need to do more here to
|
|
* cover scatter/gather case.
|
|
*/
|
|
ata_qc_set_pc_nbytes(qc);
|
|
|
|
/* request result TF and be quiet about device error */
|
|
qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
|
|
|
|
return 0;
|
|
|
|
invalid_fld:
|
|
ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
|
|
/* "Invalid field in cdb" */
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* ata_get_xlat_func - check if SCSI to ATA translation is possible
|
|
* @dev: ATA device
|
|
* @cmd: SCSI command opcode to consider
|
|
*
|
|
* Look up the SCSI command given, and determine whether the
|
|
* SCSI command is to be translated or simulated.
|
|
*
|
|
* RETURNS:
|
|
* Pointer to translation function if possible, %NULL if not.
|
|
*/
|
|
|
|
static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
|
|
{
|
|
switch (cmd) {
|
|
case READ_6:
|
|
case READ_10:
|
|
case READ_16:
|
|
|
|
case WRITE_6:
|
|
case WRITE_10:
|
|
case WRITE_16:
|
|
return ata_scsi_rw_xlat;
|
|
|
|
case SYNCHRONIZE_CACHE:
|
|
if (ata_try_flush_cache(dev))
|
|
return ata_scsi_flush_xlat;
|
|
break;
|
|
|
|
case VERIFY:
|
|
case VERIFY_16:
|
|
return ata_scsi_verify_xlat;
|
|
|
|
case ATA_12:
|
|
case ATA_16:
|
|
return ata_scsi_pass_thru;
|
|
|
|
case START_STOP:
|
|
return ata_scsi_start_stop_xlat;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_dump_cdb - dump SCSI command contents to dmesg
|
|
* @ap: ATA port to which the command was being sent
|
|
* @cmd: SCSI command to dump
|
|
*
|
|
* Prints the contents of a SCSI command via printk().
|
|
*/
|
|
|
|
static inline void ata_scsi_dump_cdb(struct ata_port *ap,
|
|
struct scsi_cmnd *cmd)
|
|
{
|
|
#ifdef ATA_DEBUG
|
|
struct scsi_device *scsidev = cmd->device;
|
|
u8 *scsicmd = cmd->cmnd;
|
|
|
|
DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
|
|
ap->print_id,
|
|
scsidev->channel, scsidev->id, scsidev->lun,
|
|
scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
|
|
scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
|
|
scsicmd[8]);
|
|
#endif
|
|
}
|
|
|
|
static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
|
|
void (*done)(struct scsi_cmnd *),
|
|
struct ata_device *dev)
|
|
{
|
|
u8 scsi_op = scmd->cmnd[0];
|
|
ata_xlat_func_t xlat_func;
|
|
int rc = 0;
|
|
|
|
if (dev->class == ATA_DEV_ATA) {
|
|
if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len))
|
|
goto bad_cdb_len;
|
|
|
|
xlat_func = ata_get_xlat_func(dev, scsi_op);
|
|
} else {
|
|
if (unlikely(!scmd->cmd_len))
|
|
goto bad_cdb_len;
|
|
|
|
xlat_func = NULL;
|
|
if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
|
|
/* relay SCSI command to ATAPI device */
|
|
int len = COMMAND_SIZE(scsi_op);
|
|
if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
|
|
goto bad_cdb_len;
|
|
|
|
xlat_func = atapi_xlat;
|
|
} else {
|
|
/* ATA_16 passthru, treat as an ATA command */
|
|
if (unlikely(scmd->cmd_len > 16))
|
|
goto bad_cdb_len;
|
|
|
|
xlat_func = ata_get_xlat_func(dev, scsi_op);
|
|
}
|
|
}
|
|
|
|
if (xlat_func)
|
|
rc = ata_scsi_translate(dev, scmd, done, xlat_func);
|
|
else
|
|
ata_scsi_simulate(dev, scmd, done);
|
|
|
|
return rc;
|
|
|
|
bad_cdb_len:
|
|
DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n",
|
|
scmd->cmd_len, scsi_op, dev->cdb_len);
|
|
scmd->result = DID_ERROR << 16;
|
|
done(scmd);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
|
|
* @cmd: SCSI command to be sent
|
|
* @done: Completion function, called when command is complete
|
|
*
|
|
* In some cases, this function translates SCSI commands into
|
|
* ATA taskfiles, and queues the taskfiles to be sent to
|
|
* hardware. In other cases, this function simulates a
|
|
* SCSI device by evaluating and responding to certain
|
|
* SCSI commands. This creates the overall effect of
|
|
* ATA and ATAPI devices appearing as SCSI devices.
|
|
*
|
|
* LOCKING:
|
|
* Releases scsi-layer-held lock, and obtains host lock.
|
|
*
|
|
* RETURNS:
|
|
* Return value from __ata_scsi_queuecmd() if @cmd can be queued,
|
|
* 0 otherwise.
|
|
*/
|
|
int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
struct ata_port *ap;
|
|
struct ata_device *dev;
|
|
struct scsi_device *scsidev = cmd->device;
|
|
struct Scsi_Host *shost = scsidev->host;
|
|
int rc = 0;
|
|
|
|
ap = ata_shost_to_port(shost);
|
|
|
|
spin_unlock(shost->host_lock);
|
|
spin_lock(ap->lock);
|
|
|
|
ata_scsi_dump_cdb(ap, cmd);
|
|
|
|
dev = ata_scsi_find_dev(ap, scsidev);
|
|
if (likely(dev))
|
|
rc = __ata_scsi_queuecmd(cmd, done, dev);
|
|
else {
|
|
cmd->result = (DID_BAD_TARGET << 16);
|
|
done(cmd);
|
|
}
|
|
|
|
spin_unlock(ap->lock);
|
|
spin_lock(shost->host_lock);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_simulate - simulate SCSI command on ATA device
|
|
* @dev: the target device
|
|
* @cmd: SCSI command being sent to device.
|
|
* @done: SCSI command completion function.
|
|
*
|
|
* Interprets and directly executes a select list of SCSI commands
|
|
* that can be handled internally.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
|
|
void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
|
|
void (*done)(struct scsi_cmnd *))
|
|
{
|
|
struct ata_scsi_args args;
|
|
const u8 *scsicmd = cmd->cmnd;
|
|
u8 tmp8;
|
|
|
|
args.dev = dev;
|
|
args.id = dev->id;
|
|
args.cmd = cmd;
|
|
args.done = done;
|
|
|
|
switch(scsicmd[0]) {
|
|
/* TODO: worth improving? */
|
|
case FORMAT_UNIT:
|
|
ata_scsi_invalid_field(cmd, done);
|
|
break;
|
|
|
|
case INQUIRY:
|
|
if (scsicmd[1] & 2) /* is CmdDt set? */
|
|
ata_scsi_invalid_field(cmd, done);
|
|
else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
|
|
else switch (scsicmd[2]) {
|
|
case 0x00:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00);
|
|
break;
|
|
case 0x80:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80);
|
|
break;
|
|
case 0x83:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
|
|
break;
|
|
case 0x89:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89);
|
|
break;
|
|
case 0xb1:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1);
|
|
break;
|
|
default:
|
|
ata_scsi_invalid_field(cmd, done);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case MODE_SENSE:
|
|
case MODE_SENSE_10:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense);
|
|
break;
|
|
|
|
case MODE_SELECT: /* unconditionally return */
|
|
case MODE_SELECT_10: /* bad-field-in-cdb */
|
|
ata_scsi_invalid_field(cmd, done);
|
|
break;
|
|
|
|
case READ_CAPACITY:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
|
|
break;
|
|
|
|
case SERVICE_ACTION_IN:
|
|
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
|
|
else
|
|
ata_scsi_invalid_field(cmd, done);
|
|
break;
|
|
|
|
case REPORT_LUNS:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
|
|
break;
|
|
|
|
case REQUEST_SENSE:
|
|
ata_scsi_set_sense(cmd, 0, 0, 0);
|
|
cmd->result = (DRIVER_SENSE << 24);
|
|
done(cmd);
|
|
break;
|
|
|
|
/* if we reach this, then writeback caching is disabled,
|
|
* turning this into a no-op.
|
|
*/
|
|
case SYNCHRONIZE_CACHE:
|
|
/* fall through */
|
|
|
|
/* no-op's, complete with success */
|
|
case REZERO_UNIT:
|
|
case SEEK_6:
|
|
case SEEK_10:
|
|
case TEST_UNIT_READY:
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
|
|
break;
|
|
|
|
case SEND_DIAGNOSTIC:
|
|
tmp8 = scsicmd[1] & ~(1 << 3);
|
|
if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4]))
|
|
ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
|
|
else
|
|
ata_scsi_invalid_field(cmd, done);
|
|
break;
|
|
|
|
/* all other commands */
|
|
default:
|
|
ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
|
|
/* "Invalid command operation code" */
|
|
done(cmd);
|
|
break;
|
|
}
|
|
}
|
|
|
|
int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
|
|
{
|
|
int i, rc;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
struct Scsi_Host *shost;
|
|
|
|
rc = -ENOMEM;
|
|
shost = scsi_host_alloc(sht, sizeof(struct ata_port *));
|
|
if (!shost)
|
|
goto err_alloc;
|
|
|
|
*(struct ata_port **)&shost->hostdata[0] = ap;
|
|
ap->scsi_host = shost;
|
|
|
|
shost->transportt = &ata_scsi_transport_template;
|
|
shost->unique_id = ap->print_id;
|
|
shost->max_id = 16;
|
|
shost->max_lun = 1;
|
|
shost->max_channel = 1;
|
|
shost->max_cmd_len = 16;
|
|
|
|
/* Schedule policy is determined by ->qc_defer()
|
|
* callback and it needs to see every deferred qc.
|
|
* Set host_blocked to 1 to prevent SCSI midlayer from
|
|
* automatically deferring requests.
|
|
*/
|
|
shost->max_host_blocked = 1;
|
|
|
|
rc = scsi_add_host(ap->scsi_host, ap->host->dev);
|
|
if (rc)
|
|
goto err_add;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_add:
|
|
scsi_host_put(host->ports[i]->scsi_host);
|
|
err_alloc:
|
|
while (--i >= 0) {
|
|
struct Scsi_Host *shost = host->ports[i]->scsi_host;
|
|
|
|
scsi_remove_host(shost);
|
|
scsi_host_put(shost);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
void ata_scsi_scan_host(struct ata_port *ap, int sync)
|
|
{
|
|
int tries = 5;
|
|
struct ata_device *last_failed_dev = NULL;
|
|
struct ata_link *link;
|
|
struct ata_device *dev;
|
|
|
|
if (ap->flags & ATA_FLAG_DISABLED)
|
|
return;
|
|
|
|
repeat:
|
|
ata_for_each_link(link, ap, EDGE) {
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
struct scsi_device *sdev;
|
|
int channel = 0, id = 0;
|
|
|
|
if (dev->sdev)
|
|
continue;
|
|
|
|
if (ata_is_host_link(link))
|
|
id = dev->devno;
|
|
else
|
|
channel = link->pmp;
|
|
|
|
sdev = __scsi_add_device(ap->scsi_host, channel, id, 0,
|
|
NULL);
|
|
if (!IS_ERR(sdev)) {
|
|
dev->sdev = sdev;
|
|
scsi_device_put(sdev);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* If we scanned while EH was in progress or allocation
|
|
* failure occurred, scan would have failed silently. Check
|
|
* whether all devices are attached.
|
|
*/
|
|
ata_for_each_link(link, ap, EDGE) {
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
if (!dev->sdev)
|
|
goto exit_loop;
|
|
}
|
|
}
|
|
exit_loop:
|
|
if (!link)
|
|
return;
|
|
|
|
/* we're missing some SCSI devices */
|
|
if (sync) {
|
|
/* If caller requested synchrnous scan && we've made
|
|
* any progress, sleep briefly and repeat.
|
|
*/
|
|
if (dev != last_failed_dev) {
|
|
msleep(100);
|
|
last_failed_dev = dev;
|
|
goto repeat;
|
|
}
|
|
|
|
/* We might be failing to detect boot device, give it
|
|
* a few more chances.
|
|
*/
|
|
if (--tries) {
|
|
msleep(100);
|
|
goto repeat;
|
|
}
|
|
|
|
ata_port_printk(ap, KERN_ERR, "WARNING: synchronous SCSI scan "
|
|
"failed without making any progress,\n"
|
|
" switching to async\n");
|
|
}
|
|
|
|
queue_delayed_work(ata_aux_wq, &ap->hotplug_task,
|
|
round_jiffies_relative(HZ));
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_offline_dev - offline attached SCSI device
|
|
* @dev: ATA device to offline attached SCSI device for
|
|
*
|
|
* This function is called from ata_eh_hotplug() and responsible
|
|
* for taking the SCSI device attached to @dev offline. This
|
|
* function is called with host lock which protects dev->sdev
|
|
* against clearing.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
* RETURNS:
|
|
* 1 if attached SCSI device exists, 0 otherwise.
|
|
*/
|
|
int ata_scsi_offline_dev(struct ata_device *dev)
|
|
{
|
|
if (dev->sdev) {
|
|
scsi_device_set_state(dev->sdev, SDEV_OFFLINE);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_remove_dev - remove attached SCSI device
|
|
* @dev: ATA device to remove attached SCSI device for
|
|
*
|
|
* This function is called from ata_eh_scsi_hotplug() and
|
|
* responsible for removing the SCSI device attached to @dev.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep).
|
|
*/
|
|
static void ata_scsi_remove_dev(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
struct scsi_device *sdev;
|
|
unsigned long flags;
|
|
|
|
/* Alas, we need to grab scan_mutex to ensure SCSI device
|
|
* state doesn't change underneath us and thus
|
|
* scsi_device_get() always succeeds. The mutex locking can
|
|
* be removed if there is __scsi_device_get() interface which
|
|
* increments reference counts regardless of device state.
|
|
*/
|
|
mutex_lock(&ap->scsi_host->scan_mutex);
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
/* clearing dev->sdev is protected by host lock */
|
|
sdev = dev->sdev;
|
|
dev->sdev = NULL;
|
|
|
|
if (sdev) {
|
|
/* If user initiated unplug races with us, sdev can go
|
|
* away underneath us after the host lock and
|
|
* scan_mutex are released. Hold onto it.
|
|
*/
|
|
if (scsi_device_get(sdev) == 0) {
|
|
/* The following ensures the attached sdev is
|
|
* offline on return from ata_scsi_offline_dev()
|
|
* regardless it wins or loses the race
|
|
* against this function.
|
|
*/
|
|
scsi_device_set_state(sdev, SDEV_OFFLINE);
|
|
} else {
|
|
WARN_ON(1);
|
|
sdev = NULL;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
mutex_unlock(&ap->scsi_host->scan_mutex);
|
|
|
|
if (sdev) {
|
|
ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n",
|
|
sdev->sdev_gendev.bus_id);
|
|
|
|
scsi_remove_device(sdev);
|
|
scsi_device_put(sdev);
|
|
}
|
|
}
|
|
|
|
static void ata_scsi_handle_link_detach(struct ata_link *link)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ata_device *dev;
|
|
|
|
ata_for_each_dev(dev, link, ALL) {
|
|
unsigned long flags;
|
|
|
|
if (!(dev->flags & ATA_DFLAG_DETACHED))
|
|
continue;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
dev->flags &= ~ATA_DFLAG_DETACHED;
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
ata_scsi_remove_dev(dev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_media_change_notify - send media change event
|
|
* @dev: Pointer to the disk device with media change event
|
|
*
|
|
* Tell the block layer to send a media change notification
|
|
* event.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_scsi_media_change_notify(struct ata_device *dev)
|
|
{
|
|
if (dev->sdev)
|
|
sdev_evt_send_simple(dev->sdev, SDEV_EVT_MEDIA_CHANGE,
|
|
GFP_ATOMIC);
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_hotplug - SCSI part of hotplug
|
|
* @work: Pointer to ATA port to perform SCSI hotplug on
|
|
*
|
|
* Perform SCSI part of hotplug. It's executed from a separate
|
|
* workqueue after EH completes. This is necessary because SCSI
|
|
* hot plugging requires working EH and hot unplugging is
|
|
* synchronized with hot plugging with a mutex.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep).
|
|
*/
|
|
void ata_scsi_hotplug(struct work_struct *work)
|
|
{
|
|
struct ata_port *ap =
|
|
container_of(work, struct ata_port, hotplug_task.work);
|
|
int i;
|
|
|
|
if (ap->pflags & ATA_PFLAG_UNLOADING) {
|
|
DPRINTK("ENTER/EXIT - unloading\n");
|
|
return;
|
|
}
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* Unplug detached devices. We cannot use link iterator here
|
|
* because PMP links have to be scanned even if PMP is
|
|
* currently not attached. Iterate manually.
|
|
*/
|
|
ata_scsi_handle_link_detach(&ap->link);
|
|
if (ap->pmp_link)
|
|
for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
|
|
ata_scsi_handle_link_detach(&ap->pmp_link[i]);
|
|
|
|
/* scan for new ones */
|
|
ata_scsi_scan_host(ap, 0);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_user_scan - indication for user-initiated bus scan
|
|
* @shost: SCSI host to scan
|
|
* @channel: Channel to scan
|
|
* @id: ID to scan
|
|
* @lun: LUN to scan
|
|
*
|
|
* This function is called when user explicitly requests bus
|
|
* scan. Set probe pending flag and invoke EH.
|
|
*
|
|
* LOCKING:
|
|
* SCSI layer (we don't care)
|
|
*
|
|
* RETURNS:
|
|
* Zero.
|
|
*/
|
|
static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
|
|
unsigned int id, unsigned int lun)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
unsigned long flags;
|
|
int devno, rc = 0;
|
|
|
|
if (!ap->ops->error_handler)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (lun != SCAN_WILD_CARD && lun)
|
|
return -EINVAL;
|
|
|
|
if (!sata_pmp_attached(ap)) {
|
|
if (channel != SCAN_WILD_CARD && channel)
|
|
return -EINVAL;
|
|
devno = id;
|
|
} else {
|
|
if (id != SCAN_WILD_CARD && id)
|
|
return -EINVAL;
|
|
devno = channel;
|
|
}
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
if (devno == SCAN_WILD_CARD) {
|
|
struct ata_link *link;
|
|
|
|
ata_for_each_link(link, ap, EDGE) {
|
|
struct ata_eh_info *ehi = &link->eh_info;
|
|
ehi->probe_mask |= ATA_ALL_DEVICES;
|
|
ehi->action |= ATA_EH_RESET;
|
|
}
|
|
} else {
|
|
struct ata_device *dev = ata_find_dev(ap, devno);
|
|
|
|
if (dev) {
|
|
struct ata_eh_info *ehi = &dev->link->eh_info;
|
|
ehi->probe_mask |= 1 << dev->devno;
|
|
ehi->action |= ATA_EH_RESET;
|
|
} else
|
|
rc = -EINVAL;
|
|
}
|
|
|
|
if (rc == 0) {
|
|
ata_port_schedule_eh(ap);
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
ata_port_wait_eh(ap);
|
|
} else
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_scsi_dev_rescan - initiate scsi_rescan_device()
|
|
* @work: Pointer to ATA port to perform scsi_rescan_device()
|
|
*
|
|
* After ATA pass thru (SAT) commands are executed successfully,
|
|
* libata need to propagate the changes to SCSI layer. This
|
|
* function must be executed from ata_aux_wq such that sdev
|
|
* attach/detach don't race with rescan.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep).
|
|
*/
|
|
void ata_scsi_dev_rescan(struct work_struct *work)
|
|
{
|
|
struct ata_port *ap =
|
|
container_of(work, struct ata_port, scsi_rescan_task);
|
|
struct ata_link *link;
|
|
struct ata_device *dev;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
ata_for_each_link(link, ap, EDGE) {
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
struct scsi_device *sdev = dev->sdev;
|
|
|
|
if (!sdev)
|
|
continue;
|
|
if (scsi_device_get(sdev))
|
|
continue;
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
scsi_rescan_device(&(sdev->sdev_gendev));
|
|
scsi_device_put(sdev);
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* ata_sas_port_alloc - Allocate port for a SAS attached SATA device
|
|
* @host: ATA host container for all SAS ports
|
|
* @port_info: Information from low-level host driver
|
|
* @shost: SCSI host that the scsi device is attached to
|
|
*
|
|
* LOCKING:
|
|
* PCI/etc. bus probe sem.
|
|
*
|
|
* RETURNS:
|
|
* ata_port pointer on success / NULL on failure.
|
|
*/
|
|
|
|
struct ata_port *ata_sas_port_alloc(struct ata_host *host,
|
|
struct ata_port_info *port_info,
|
|
struct Scsi_Host *shost)
|
|
{
|
|
struct ata_port *ap;
|
|
|
|
ap = ata_port_alloc(host);
|
|
if (!ap)
|
|
return NULL;
|
|
|
|
ap->port_no = 0;
|
|
ap->lock = shost->host_lock;
|
|
ap->pio_mask = port_info->pio_mask;
|
|
ap->mwdma_mask = port_info->mwdma_mask;
|
|
ap->udma_mask = port_info->udma_mask;
|
|
ap->flags |= port_info->flags;
|
|
ap->ops = port_info->port_ops;
|
|
ap->cbl = ATA_CBL_SATA;
|
|
|
|
return ap;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
|
|
|
|
/**
|
|
* ata_sas_port_start - Set port up for dma.
|
|
* @ap: Port to initialize
|
|
*
|
|
* Called just after data structures for each port are
|
|
* initialized.
|
|
*
|
|
* May be used as the port_start() entry in ata_port_operations.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
int ata_sas_port_start(struct ata_port *ap)
|
|
{
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_port_start);
|
|
|
|
/**
|
|
* ata_port_stop - Undo ata_sas_port_start()
|
|
* @ap: Port to shut down
|
|
*
|
|
* May be used as the port_stop() entry in ata_port_operations.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
|
|
void ata_sas_port_stop(struct ata_port *ap)
|
|
{
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_port_stop);
|
|
|
|
/**
|
|
* ata_sas_port_init - Initialize a SATA device
|
|
* @ap: SATA port to initialize
|
|
*
|
|
* LOCKING:
|
|
* PCI/etc. bus probe sem.
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, non-zero on error.
|
|
*/
|
|
|
|
int ata_sas_port_init(struct ata_port *ap)
|
|
{
|
|
int rc = ap->ops->port_start(ap);
|
|
|
|
if (!rc) {
|
|
ap->print_id = ata_print_id++;
|
|
rc = ata_bus_probe(ap);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_port_init);
|
|
|
|
/**
|
|
* ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
|
|
* @ap: SATA port to destroy
|
|
*
|
|
*/
|
|
|
|
void ata_sas_port_destroy(struct ata_port *ap)
|
|
{
|
|
if (ap->ops->port_stop)
|
|
ap->ops->port_stop(ap);
|
|
kfree(ap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
|
|
|
|
/**
|
|
* ata_sas_slave_configure - Default slave_config routine for libata devices
|
|
* @sdev: SCSI device to configure
|
|
* @ap: ATA port to which SCSI device is attached
|
|
*
|
|
* RETURNS:
|
|
* Zero.
|
|
*/
|
|
|
|
int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
|
|
{
|
|
ata_scsi_sdev_config(sdev);
|
|
ata_scsi_dev_config(sdev, ap->link.device);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
|
|
|
|
/**
|
|
* ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
|
|
* @cmd: SCSI command to be sent
|
|
* @done: Completion function, called when command is complete
|
|
* @ap: ATA port to which the command is being sent
|
|
*
|
|
* RETURNS:
|
|
* Return value from __ata_scsi_queuecmd() if @cmd can be queued,
|
|
* 0 otherwise.
|
|
*/
|
|
|
|
int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
|
|
struct ata_port *ap)
|
|
{
|
|
int rc = 0;
|
|
|
|
ata_scsi_dump_cdb(ap, cmd);
|
|
|
|
if (likely(ata_dev_enabled(ap->link.device)))
|
|
rc = __ata_scsi_queuecmd(cmd, done, ap->link.device);
|
|
else {
|
|
cmd->result = (DID_BAD_TARGET << 16);
|
|
done(cmd);
|
|
}
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ata_sas_queuecmd);
|